I am relatively new to VBA and have this loop (see below) was wondering if it was possible to build it into a variable, so I could call upon it within an IF statement.
Set ctl = Me.listSeeAllAssets
For Each varItem In ctl.ItemsSelected
rs1.AddNew
rs1!AssetNo = ctl.ItemData(varItem)
rs1!DateOfService = Me.DateOfService
[Code] .....
I some code that is reading the first 32 lines of a text file and paste the results into 1 text box on individual lines. I would like each line to go into an individual text box.
I have 32 text boxes named txt_1, txt_2, txt_3
I have a variable named ThisLine holding the line of the text file.
I have a variable named textBoxName holding the name of the control.
Need to putting these together to write the line to a text box .
Code:
Sub ReadFile()
Me.txt_newData = ""
Me.txt_OrigData = ""
'again, we need this strange thing to exist so that ...
Dim fso As New FileSystemObject
[Code] .....
I want to make a loop like this:
Dim var1 As Variant, var2 As Variant, var3 As Variant, var4 As Variant
DIm var5 As Variant, var6 As Variant, var7 As Variant, var8 As Variant
Dim var9 As Variant, var10 As Variant
Dim i1 As Long
i1 = 1
Do Until i1 > 10
var & i1 ??? = "0" & i1 & "." & txt1 & "." & txt2
i1 = i1 + 1
Loop
How to make concatenate var + i1 to make loop function?
Im trying to create a loop that searches through a table and increments a variable every time it finds a record with a specific field set to a specific value. Below is the code but its not working. I then use the variable for another field.This is used in a form btw.
Dim counter As Integer
counter = 0
Set rst = CurrentDb.OpenRecordset("TableName")
Do Until rst.EOF
If rst(10) = "True" Then
counter = counter + 1
End If
rst.MoveNext
Loop
Me.Text24 = counter
Error 91 - Object variable or With block variable not set
I am getting this error telling me that an object variable is not set.
I know which variable it is but when I step through the debugger it sets the variable and all is fine? Issue is that public variable of a class is not getting set when the VBA Editor is not open?
This code runs fine the FIRST time, however trows up a message the SECOND time it is run.
The error is on the line ".Range"
I am trying to sort records which have been exported to Excel.
Dim LR As Integer
LR = 5
Set xlApp = CreateObject("Excel.Application")
xlApp.Visible = True
Set wbRef = xlApp.Workbooks.Add
With wbRef
wbRef.Activate
.Worksheets("Sheet1").Activate
With ActiveSheet
.Range("A2", .Cells(LR, "O").End(xlUp)).Sort Key1:=.Range("C2"), Order1:=xlAscending, Header:=xlYes
End With
end With
I look at a lot of files to see when they were last updated. I wanted to write a generic procedure to manage that so ..
Code:
Public fDate As Variant
Public vField As String
Public vFile As String
'GTSdata
vField = "txt_gts_data"
[Code] ....
What I hoped Me.vField would do is update the date field [txt_gts_data] on my form with the date the file was last saved.
i.e. me. txt_gts_data = fDate
What actually happens is the variable vfield gets updated from "txt_gts_data" to 19/08/2014 then later code falls over because the fieldname is lost .
Me.[vField] corrects itself to me.vField (and does not work)
Me!vfield falls over (cannot find the field vField, not surprising J)
How do I say update the contents of the variable, not the variable itself?
I am trying to build a new sql statement for a query using a string from items selected in a list box on a form. I have the string in place and keep getting syntax errors for the new sql statement. The code is below.
strSQL = " SELECT JG_tbl_LMEMP.DEPT_CODE" & _
" FROM JG_tbl_LMEMP" & _
" Group by JG_tbl_LMEMP.DEPT_CODE" & _
" Where JG_tbl_LMEMP.DEPT_Code IN(" & strCriteria & ")"
qdf.SQL = strSQL
I am trying to build an event when I double click a field. As soon as I click on Code Builder, access crashes. It does this with every access database I open.
View 14 Replies View RelatedI'd like to override the default behaviour for deleting records in a form.Specifically, I want to build my own custom delete procedure so that when the user presses the Del button, my code fires to complete the deletion of the selected record(s). In order to do that, I'd set Allow Deletions = No for that form. I'd also want to code the KeyDown event for the Del key so that if record(s) are selected, my custom delete code fires, else the default behavior for the Del key happens.I'm primarily interested in how I might code the KeyDown event.
View 12 Replies View RelatedI'm making an accounts package.
I've made a graph of revenue by customer but due to the number of customers it's a bit hard to see the customer names.
So I would like to be able to select my own custom group of 5 customers to plot on the graph.
To do this I think I need a query that selects the 5 customers which is populated from 5 comboboxes on a new form that the user can select customer names from but I'm not sure of the VBA that links all this together.
I have an endpoint for students so they can report any faults in the compound.I want to build a form that contains buttons of a certain value so that a student clicks on the button.Is fed directly to the table and pass to the next form to another value table.
View 7 Replies View RelatedI have to loop thru 2 recordsets.I need to first determine the quarter , then retrieve a value from each of the 6 fields for that quarter and compare that value against a previous years value that is also stored in the table for each quarter.the following is the field names not the field value.
Tier 1 2 3 4 5 6 PrYr
Qtr1 Q1T1, Q1T2, Q1T3,Q1T4, Q1T5, Q1T6 .385
Qtr2 Q2T1, Q2T2, Q2T3.Q2T4, Q2T5, Q2T6 1.25
Qtr3 Q3T1, Q3T2, Q3T3,Q3T4, Q3T5, Q3T6 .774
Qtr4 Q4T1, Q4T2, Q4T3,Q4T4, Q4T5, Q4T6 .333
if Qtr1 = Q1T1 = 0.44 Q1T2 = .50, Q1T3 = 1.45, Q1T4 = 3.00, Q1T5 = .25, Q1T6 = 6.0
So I need to be able to set the value of PrYR = .385 and compare against the value of the 1st qtr for each tier for Qtr1.Then go to Qtr2 and repeat the process but grap the Q2 PRYR value = 1.25 and compare against all Tiers for Qtr2.As so forth for each quarter.then I need to compare the value of the PrYr and if it is the following then
If PctYrlyIncrease< Tier1 Pct (Q1T1) Payout = 0
elseIf PctYrlyIncrease> Tier1 Pct (Q1T1) and < Q1T2 then
Sum(TotalNetUSExp * T1E)
ElseIf PctYrlyIncrease> Tier2 Pct (Q1T2) and < Q1T3 then
Sum( TotalNetUSExp * T2E)
and repeat for each Tier per Each Qtr.Here is my code so far:
Code:
Public Function BkOvrCalc(ByVal gContractID As String) As Long
Dim curDB As DAO.Database
Dim strSQL As String, strSQL1 As String
[code]...
Here is the code:
Private Sub Form_Load()
Dim rs As Recordset
Set rs = CurrentDb.OpenRecordset("select * from tblpatient, dbOpenDynaset)
If Not (rs.BOF And rs.EOF) Then
rs.MoveFirst
Do While Not rs.EOF
' do stuff
rs.MoveNext
Loop
rs.Close
Set rs = Nothing
End If
End Sub
I have watched it step through on debug and it does everything right for the first record, but it seems to come back to the same record.
I have a form where a textbox has shows the NameNo from the NameNo column in a db. At the moment I am using a dlookup to set the textbox = to the NameNo, but obviously this is only returning the 1st value in the column. How to get this form to automatically display each NameNo, creating a pdf of the form and then moving on tto the next nameno. I have the code to make the pdf working so far, all I need now is to figure out how to use the textbox to loop through all the NameNo's in the table.
View 3 Replies View Relatedi have the following code to get file list from specified directory:
Code:
Dim db As DAO.Database
Dim TB1 As DAO.Recordset
Dim p As String, x As Variant
[Code].....
the field "File_Name " is not set to accept duplicate the above code work fine , but when it find the file name exist on the TB1 it return an error i need the code if find any error continue to retrive other files on the folder not exit loop and also i don't want to make check if file exist it will lower the speed of code
Is there a way of looping through a non update able continuous subform, and using information from each line.
Which creates a new record in another table? so if there are 3 records in the subform it creates 3 new records in the other table and so on?
why my access always go over the loop that I am declaring..Here is a sample of my code:
Code:
Dim rs As New ADODB.Recordset
rs.ActiveConnection = conn
rs.Open mySQL, conn, adOpenDynamic, adLockOptimistic
For lngProd = 1 To 5
[code]...
I get the error of access cannot find the tbl_data6. Where in the declaration I wrote 6??
I believe this is most recurring scenario for all. Any simple way like:
Code:
For each file in folder.files
Msgbox File.Name
Next File
For your information the above code doesn't work
Basically what I am trying to accomplish is uploading multiples file automatically into server. The code I am trying to use works great if the user wants to upload a single file manually because the code prompts you to choose the file and I am wondering if there is a way to tweak the code. here is the code I am using
Code:
Private Sub Form_Load()
Dim objFTP As FTP
Dim strfile As String
[Code].....
this is a progress bar, what i need is, while execute loop (progress bar) but also execute next command = "LedgerExe:
On Error GoTo Proc_Err
Dim inti As Integer
Dim dblPct As Double
[Code]....
I work for an insurance company where various (and multiple) discounts or loads can be applied to a quoted premium for one reason or another.
These discounts/loads are stored in a table with a corresponding customer ID, where each row represents an individual discount/load (labelled and ordered-by a 'Step').
Unfortunately, the resulting premium from these discounts/loads is not stored in the database and are calculated on the fly by the front-end.
I have a requirement however, to store the 'new' premiums based on the stored discounts/loads for a report.
My problem is that the calculations must occur incrementally one after another, where the discount/load at each 'Step' applies to the resulting premium from the previous calculation.
The attached spreadsheet is demonstrative of the existing table where two additional columns have been added to show you what I need to calculate. 'Price_Amount' represents the discount/load in monetry terms relative to the calculation and 'New_Prem' is the premium resulting from the calculation step.
Notice that each discount/load applies to the previously calculated premium rather than the original one (Original_Prem = the starting point from which all further calculations should apply).
The full table would include many more rows for different customer ID's, where the number of 'steps' could be as few as 1 or as many as 7 per customer ID (ordered by 'Step').
Having toiled for many hours in Access to achieve the above, I am now resigned to the fact that only some kind of VBA function will achieve my requirements.
This function should take the Original Premium for each CustomerID and loop through each 'Step' applying the relative discount/load based on the value in 'Pricing' and the number type in 'Price_Type'. Once the function has calculated each step per CustomerID and has reached the maximum 'Step', it should move on to the next CustomerID.
such can only articulate the requirements without being able to convert this into actual coded logic. Nonetheless, I am in a bit of a pickle with this one and am under some pressure to create the report.
Is it possible to run a loop through each record in query, but refresh the query in between loops?
The query I am looping needs to be updated before moving to the next record.
t can't figure out how to get the query to refresh before looping.
I am using to select and append data to an output table. Everything is working fine until the last step. The last step appends all the data to an output table from the initial table. The intermediate steps select the data to output.
"AddExpenseToOutput()" is stopping about halfway through the list of criteria. Initially I thought there might be a null in the list, but it doesn't look like there is after dropping everything into Excel to manipulate.
Code:
Option Explicit
Dim rstAccount As DAO.Recordset
Dim rstAccounts As DAO.Recordset
Dim CAccounts As String
Dim Item As String
Dim AccountKey As String
[Code] ....
I have a sample database (attached) where I have a form called frmVoteHeadsOne. The voteheads that I have are swimming (Swim) and transport (Trans), which both appear for data in a table. On the form, from the combo list, I would wish that if I select swimming, for example, only Mark Tyler's name is returned since he has paid 2000; if I select Transport from the same list, only John clement's name is returned.
My purpose for doing this is because in the actual database, I have 21 different voteheads which I would like to get different results from based on what the user selects from the combo list.
I've got a problem with a loop for producing worksheets (reports). When everything works there's no problem but when one of the reports namely rptChemoOralWorksheet doesn't have data available to produce the report the loop finishes and then all remaining worksheets don't print.I've put in a standard error handler with MsgBox, but it's never triggered. I've also tried
Code:
On Error Resume Next
but again rather than skip the DoCmd.OpenReport "rptChemoOralWorksheet" (when the error is present) and move to the next one to continue printing through the list the loop stops and the subsequent code starts to run.
Code:
Dim mydatabase As DAO.Database
Dim rst As DAO.Recordset
Set mydatabase = CurrentDb
Set rst = mydatabase.OpenRecordset("atblChemoWSLoop", dbOpenDynaset)
Dim rsBN As String
Dim rsDose As Double
[code]....