I have a form that have textbox that calculate total and then i want to convert numbers to words. Iv got the code with function currencytotext but when i set the code source of another textbox to:
=currencytotext([inv_total])
I have an error. I saw this on internet but i think bcz I am using access 2013 may be the syntax is different a bit.
I am looking to calculate numbers in query like this if the field name in query is Unit and the second field name is amount and i want that the amount field to calculate the unit field on this criteria..Suppose if total unit is 393 so the calculation should be like this;
First hundred should be calculated with 100.00 X 5.79 = 579.00
Second 200.00 X 8.11 = 1622.00
Third 93.00 X 12.33 = 1146.69
Total should be displayed in the amount field = 3347.69
I have two numbers, i need to calculate how much percentage of one is the other. E.g
num_1 = 100
num_2 = 10
percent = 10%
Users enter a dollar amount (retainer) and my code should calculate the percent of the total proposal amount.
Actual Code
Private Sub cmdSubmit_Click()
Dim intProposalTotal As Double 'if i use interger i get "overflow" error
intProposalTotal = Nz(DLookup("ProposalTotal", "qryPropsalTotalForRetainer", "proposal_id=" & Me.proposal_id), 0)
[Code] .....
billing_retainer_percent is formatted to Percent with 0 decimals. In the actual table Type - Number, Format - Percent, Field Size - Single. What i get is 100% instead of 10%.
Dear all,
If some have the code for converting amount to words in rupees, please help me...
Thanks in advance
Thanks:(
Dear all,
If some have the code for converting amount to words in rupees, please help me...
Thanks in advance
Thanks:(
I'm trying to pull fields from a table into a form - and have had other problems with this.....
What is textual information in one table. ie. the table I am trying to acces from a drop down will only appear as numbers instead of the text entry in the original - I have triend the bound colums but these are correct?
I've had this problem at a couple of points - it seems to be formatting the forms as numbers and pulling in the record numbers rather than the textual information. The bound colums are pointed at the textual entries but I can not change the formatting in the forms etc to text rather than number... In the drop down it shows the text entries but will not allow them to be saved when updated?
Is it possible to convert a number (whether in the "Standard" or "Currency" format) into words ?
View 5 Replies View RelatedGood day everyone!
I'm designing a system in which I have two fields
Amount in Numbers and Amount in Words
I want to be able to type in the amount in numbers and the amount in words should appear automatically.
I need the code and in wich event should I put it.
This is an urgent request. any help will be very much appreciated.
Thanks alot!
I am trying to create a query that has a self referencing running total based on the values (point totals) of itself (running total of values in the running total column that have already been calculated for all previous records) plus the total of new points being added in the current record, less the total of points being removed in the current record. This running total can never go below 0, if it does, the running total should restart at zero and add in only new points and begin the process again with the next records
I am able to do this in Excel in less than two seconds so I know there has to be a way to port this into a query. I've attached an excel example of what I am exactly trying to do
If it takes multiple queries to complete the required output I am ok with it. In my previous outtakes I have had up to 8 queries but just couldn't seem to do it..
I'm trying to show the modal value of a column in a query that only has text in, not numbers. I want to present this in a text box in a report.
My report already has a query as its record source that only shows data for a given year and given month, these are chosen using parameters created in the query. Thus all I need to figure out is how to show the modal value for the column "Categories" on the report somehow.
Here are my parameters:
Query: [Formula Query]
Column: [Categories]
I have a main form and a subform. The main form displays the information as combo box = column.2 (in other words it shows the actual word not recorded y/n checkbox = obviously shows which is checked
However the subform shows
combobox = 1 or 2 etc the recordid
y/n check box 1 for yes 2 for no
How do I get the subform to display the words instead of numbers? (can live with the Y/N)
have basically the same issue with a split form (combo only) shows words and datasheet view shows corresponding record id number
tried using =[coffeetype].[column.2] on both the subform and split form datasheet but doesn't work.
Hello
I have some data I need to clean.
It is in an address field the majority of the data is fine but there are some records with words that have been spelt with numbers:
2 9RAMBLEGATE
2 Forest V1EW
2 KEM8LE Close
2 BELLEMOT4TE Road
Is it possible using a query to find instances where this has happened so I can flag these?
Any help would be greatly appreciated
Tim
:confused:
I'm working on a form that when opened has a pop up filter that asks you to enter "1, 2, 3, 4 or 5". These numbers have to be equal to an actual word within the form. For example, on the form we have a box called "business unit". One of the options in "business unit" is "Human Resources".
I want to set 1 = to Human Resources so that way in the filter box all a person has to type is 1, and all of HR's records will pop up. The reason for this is we are trying to eliminate typing as much as possible.
Ok so in excel I have some numbers that are stored as text. The reason being that they are zip codes and some begin with 0 and excel doesn't want numbers to start with 0....so when I import these into an access field that has an input mask for zip codes...will it convert these correctly since the field is a text with input mask?
View 1 Replies View RelatedI am using access 2007 i need to know that i have a field as combined sum of apx cost with the name =sum([apx cost]) in the report section, i need the value coming in this box to be converted in text as pak ruppees.
View 3 Replies View RelatedI have one table with an auto-number field which creates an employee ID. I have another table where I want an employees name to appear rather than the ID. How can I convert these ID numbers into a name?
View 2 Replies View RelatedHello, I have a Field in a Table called Fund Codes and they are entered as text: 1, 2, 3, 4 all the way to 1000. Now i need to find away to change 1 to 001, 2 to 002, 3 to 003, 10 to 010, but leave 100 as 100 and 222 as 222, so only add 0s to numbers from 1 to 99. Is there a way to do it? I know i can change the text to numbers and use format to do that, but i need to leave it as text. Please help. Many thanks!
View 11 Replies View RelatedHi, i'm trying to calculate the amount of employee for each company giving me a total in the queries.. how do i go about this? I'm not an person who uses Access to solve this. I have amount 20 Companies stored and over 800's employee.. Here are the field in the table:EmployeeIDEmployeeNameNumberofEmployeeThanks! Hope this helps.
View 1 Replies View RelatedI need to convert a numbers column in an access table to a text format
View 3 Replies View RelatedHi All.
I try to generate a report which calculate subtotal for patient AMOUNT for current year and total for whole period from first visit to current date. The result of subtotal =Sum(IIf(Year(Date()=[VisitYr]),[Amount])) is the same like total. What is a correct way?
Thanks.
Say I have a table with ID's of people and a column with the hours they need to work on a specific day. I want to make a query where I get the total working hours for every person in that table for a certain date. The problem is that when a specific person in the table has no hours for a certain day he doesn't show up in the query if I choose that day.., is there a way to make sure that I get everybody's names for every day even if they don't have any hours on that day, but instead of not showing it would show a "0" instead?
View 1 Replies View RelatedHi Folks,
I am attempting to split out a descriptive field so that each words which may exist in that particular field will be split out into seperate fields ... for example, if the violation field is populated with a four worded description of 'Assualt on Police Officer' I would like to somehow strip out the words so that 'Assualt' and 'on' and 'Police' and 'Officer' are all in seperate fields. I am not sure if this can be done using a simple query in access ... if anyone can offer any suggestions, I would greatly appreciate it.
Thank you,
Joe
Ok, this one has me stumped.
I have a several fields on my form that are list boxes that must have text as the properties so I can populate the lookup data with things like" Severe rating = 7 points" and "Moderate rating = 3 points". I have another similar field where the choices are "High probability = 9 points" and "Low probability = 2 points" etc. A third field needs to show the total points (product) of the choices from the first two fields, i.e. 9 points x 2 points = 18 points. Then,
a fourth field needs to display where the answer falls in a grid, i.e. 1-14 points = Low, 15-29 points = medium, 30-49 points = high, etc.
How do I apply the calculations on the field choices if the field properties have to be text instead of number?
Thanks,
bugleboy:confused:
Hello, i have a table with the fields: "employee_number", "shiftdate" "department" "basic_hours", and "over_time"
And a query named "employee_hrs" looks at the fields in this table, i would like a new field in the query to be able to calculate the total hours for all employees together but for each department.
eg the total of: basic hours + overtime for department A)
the total of: basic hours + overtime for department B)
and so on for each department
would only like to show one instance of a department (distinct) with the total hours done by all employees for that department?, if any one could please help me out that would be great!?
I have this columns :
Income | Outcome | Transport | Total Income | Date
Total Income (N) = Income (N) + Transport (N-1)
Total income equals income from that day + transport from previous day
Transport (N) = Total Income (N) - Outcome (N)
Transport from previous day equals Total Income minus outcome
How can I calculate the transport from previous day to sum to next day total income?
I have Datein and Dateout fields with many rows of dates beneath each. I used DatePart in a query to convert each date to a week number; but now need to count, and total, how many times each week number occurs under each field.
I'm sure this can be done easily, but I'm new to expressions, functions, etc, and would greatly appreciate some help!