Modules & VBA :: Can Have A Combo Box Without A Control Source
Dec 21, 2014
I want to have a Combo Box on a form, that derives its values from a Table, but does not send selected values to another table. I want to use the value selected in the combo box in VBA code.I have set up a combo box, without a control source, and it shows the values in the drop down list but after I select one the box just goes empty. I expected that after selecting a value that value would be displayed in the combo box (and that would then become the value of the combo box that I could then use in code. I.e, CmdBox1.Value). If so, what do I need to do so that the value selected is displayed (and becomes the value of the combo box?).
View Replies
ADVERTISEMENT
Jan 5, 2013
I have a combobox containing the "Field Names" of a table called "Main" Also, I have a report called xyz which only has one field.
All I want, whatever field name user selects in the combo, report displays the results of selected field name only.
example
Main Table has three fields (Fie1, Fie2 and Fie3) The combo box lists the names of all three fields (Fie1 to Fie3) Report has a textbox in the detailed section.
I want user to select the field name from combo click button to generate the report (lets say if user selected Fie2) and want textbox to list all the records of Fie2
i tried [Forms]![Fm1]! [cm1] but it is listing the field names not the values in the field...
View 1 Replies
View Related
Jun 12, 2014
I have a combo box control in my form named PayDateID, but I told that control to DISPLAY the associated field PayDate.
I now am trying to make a separate control in the same form whose control source is the DISPLAYED PayDate, but it only wants to reference the underlying PayDateID.
How can I make the control source be the displayed value in that combo box?
View 1 Replies
View Related
Oct 10, 2012
i have a list box with 6 columns. in column 6 there is a time field. on selecting this list box i want to set the value of a combo box to the time field.
so in the control source i put
[Forms]![frmAppointmentTreatmentItems]![comboTreatmentDuration]
This has no effect. I am not sure if i have done this correctly. but the combo box has manual values in it. the reason i want to have values in it is so if the treatment is 45 minutes at default. But i want to change it to 30 minutes just for a single occasion then i thought that this would be the way to do it.
View 11 Replies
View Related
Dec 31, 2013
I have a set of cascading combo boxes. When a value is selected in Cat 1 ID, it narrows down the selections in Cat 2 ID which narrows down the selections in Cat 3 ID.
However, the values don't show up for columns Cat 2 ID or Cat 3 ID until I enter the row. Then I have it set to requery the fields because the underlying data isn't populated. But then when I leave the row, the values go away.
Why doesn't it show the underlying value from the table? Each column is bound to a field in a table - I would assume that the recorded value would show up. Did I miss something easy?
I've attached a picture of exactly what I mean.
View 2 Replies
View Related
Feb 2, 2014
I have two queries called "Query_match_AND" and "Query_match_OR". I want to show the total number of records for either of these queries in a form called "form_candidates_result" depending upon the combo box value (either "AND" or "OR") in a form called "form_match".If I put
Code:
=DCount("*","Query_match_AND")
in the control source of [candidatecount] in "form_candidates_result", the value is shown in the form and it works fine.If I use the following code in either of the "on load" or "on open" events in "form_candidates_result"...
Code:
Select Case [Forms]![form_match]![ANDOR]
Case "AND"
Me.CandidateCount.ControlSource = DCount("*", "Query_matching_AND")
Case "OR"
Me.CandidateCount.ControlSource = DCount("*", "Query_matching_OR")
End Select
it doesn't work and I get
Code:
#NAME?
View 7 Replies
View Related
Oct 21, 2013
Is there a way to set the control source for an entire form through VBA? I have a database that was set up just as an archive file, not intending to have any forms or reports in it. It was simply to house tables containing data from previous years. My main database just copies the table over to the archive file and adds the year to the table name. I have just been told that the users would like a form and a series of reports set up in this database.
I would like to set the main form up so that before it will allow them to do anything, they have to enter the year of the data they are looking for. After the year has been entered, I would like to adjust the control source of the form to reflect the appropriate table. In other words, when a user opens the archived database, he or she will see a field for the year an nothing else. Once they enter the year they are looking for, the form will populate with data from the corresponding table (the table names look like this - tblPM_Completed_2013). Is this possible?
View 6 Replies
View Related
Feb 25, 2014
I want to create a table of all fields in a form, their datatype and their controlsource.
I have done the first 2 parts easily enough using the forms.formname.controls.name property
and
TypeName(forms.formname.controls)
But I am unable to pragmatically read the controlSource.
EG
forms.formname.controls.txtname.controlsource works
but when In a for loop
I cannot use the name of the control to return the control source.
Code:
Sub PopTab
Set frm = forms.FrmCases
for each CTl in frm.controls
MyName = ctl.name
MyType = TypeName(ctl)
MySource = ctl.name.controlsource
end if
next ctl
end sub
View 3 Replies
View Related
Sep 19, 2005
I have an unbound form with three tabs. On each tab there is a sub form. Each tab is a search form and each sub is a results returned. I have made everything unbound and set the sub form recordsource and its controls control souce on afterupdate of the main form search criteria. Works fine except for after some use the db decides the sub forms are not unbound and sets the record source and control sources.
I'm trying to do a
Me.PollingPlacesResults.Form.RecordSource = ""
Me!PollingPlacesResults!PollID.ControlSource = ""
but this does not seem to work in actualy removeing the record source and control source.
View 14 Replies
View Related
Sep 24, 2013
I added a new field to one of my tables and query, but when I try to add a control for that field into my form it is not recognising it and the field isn't appearing in the sources for the form, even though the table is sourced to the form? Or am I going to have to do the usual and redo the entire form because I made a minor adjustment?
View 1 Replies
View Related
May 28, 2015
I have table that I had to add a new field to which we update with a form. I tried to add a control for the new field but the field does not show up in the list for the control source. I am trying to add a list box to the form with a blank and 5 options.
I have attached screen shots of the table design and the form. The table has the field in datasheet view and I have manually entered a few entries in it but it still will not show in the control source for the form control. The top section of the form is where we enter and select the data for the new records. The bottom section (circled in red) autofills the matching record, from separate tables, for updating with the new entries.
I have added form controls for modified fields in the past so I am confused about why this is happening.
View 2 Replies
View Related
Nov 21, 2013
On my form I have a combo box where the user can select the sex of a person. I had set the row source of the combo to a table, tblSex and this works fine. Now I want to programatically add the table entries ( simply male or female) to the row source, having set the combobox to value list. I cant see how to pass the combobox and tablename parameters and I am getting an error on form load "The expression you entered as the event property setting produced the following error: UserDefined type not defined" The calling procedure from frmPeople is
Code:
'---------------------------------------------------------------------------------------
' Procedure : Form_Load
' Author : Administrator
' Date : 21/11/2013
[Code].....
I think the way the parameters combobox and tablename are passed is incorrect. I want to write a robust procedure which I can use for each of the comboboxes on my form.
View 7 Replies
View Related
Nov 24, 2013
How to use the combo box from the form to control subform button or textbox visible or not?
View 5 Replies
View Related
Jul 27, 2005
Hi all, at the moment all of my field are control sourced. I heard there is a way whereby the field could be unbound and one button it the control source for them all. Im not entirely sure what this means or how to go about it. But i think it would solve the problem of if my users start entering data into a record and then decide to leave it, this record is automatically added to the table, with little or no data. As the data in the table is used for statistics, the table showing records which are not actually there is causing problems. Im not sure if i explained this well, but i would be grateful of any help. Thanx
View 1 Replies
View Related
Sep 13, 2005
I have a subform listing items for purchase. Some are services and are not taxable, some are products and are taxable.
So far, I am calculating the sales tax for each record (item paid for), based on whether the thing is taxable or not and putting that result in a text box (txtSales_Tax) on the form. Since these calculated amounts aren't stored in a field, I can't SUM them, since SUM only works on data in table fields. Can someone tell me how to get a total?
Otherwise, I'll get rid of txtSales_Tax entirely, if someone can tell me how to write a SUM function, as a Control Source, that includes an IIf, or a WHERE, so it only adds items where the yes/no field Taxable=True.
I've got an IIf with a SUM function in it but, even in the footer, that only works for the current record. I need a SUM that has a nested IIf or WHERE in order to include all the records.
View 1 Replies
View Related
Mar 30, 2008
I have a drop down list of Last name and first name.
I want this to be the only unlocked feature on the page. When a name is selected the other information is shown (the persons cc#, Exp date, phone number, email etc.)
I am almost sure its a control source, but i'm not 100% as i'm relatively new to Access..
Another issue I would like to know is how to show the Last Name, First Name in the selected drop down after its selected, currently its only showing the Last name.
Thanks in advance
View 4 Replies
View Related
Apr 1, 2005
is it possible to change the control source of an unbound text box ?
For example i have a textbox which simply displays the number of current records displayed i.e. =DCount("*", "queryname")
Now i wanted that with the click of a button (or something), i wanted to change it's controlsource to =DCount("*", "queryname2") ... however, as a result i got #name instead of the correct count.
Thanks
View 5 Replies
View Related
Jul 14, 2005
I have created a new field in a Form and named the Control Source "Active". However, when I vew in Form View there is a "0" in the field and it also does not allow me to type anything in the field.
Any help would be greatly appreciated.
View 3 Replies
View Related
Mar 30, 2008
I have a drop down list of Last name and first name.
I want this to be the only unlocked feature on the page. When a name is selected the other information is shown (the persons cc#, Exp date, phone number, email etc.)
I am almost sure its a control source, but i'm not 100% as i'm relatively new to Access..
Another issue I would like to know is how to show the Last Name, First Name in the selected drop down after its selected, currently its only showing the Last name.
Thanks in advance
View 1 Replies
View Related
Jan 30, 2007
I want to select JPEG's and Visio files to import and viewable in the report format.
Can anyone give me an idea of how to achieve this...I have been told I need a control source...
Thanks
View 4 Replies
View Related
Mar 31, 2014
I have a form that currently uses a "catch all" table for listing available equipment to choose from for an equipment field. I call it tblEquipment. What I want to do is to make it so when I type a name in (1 of 35) in one field of the current record, the record source for the equipment field immediately looks at a different table that has equipment available only for that name. To do this I plan on making 35 different tables with limited data originally found in tblEquipment. I would call these tblEquipment1, tblEquipment2, etc. I do not use a sub form, nor do I want to.
So my questions are:
1) can this be done
2)If it can be done, how can I do it?
View 3 Replies
View Related
Sep 8, 2005
I'm creating an order form for a clinic.
Health-related services are not charged sales tax, but products are.
In order to have one subform to do the job (rather than one for non-taxable and one for taxable items), I'm trying to create separate running sums of taxable and not taxable items from the same query, but am not getting far. "WHERE" statements don't seem to be working in Control Source code.
Currently, there's a cboItem_Name that populates txtItem_Cost. There's txtQuantity and txtExtended_Price. All working fine. The cbo query includes whether the item is taxable or not, from a YES/NO field in the table.
I'm trying to get txtTaxable_Sub_Total to SUM[Item_Cost]*[Quantity] where [Taxable] = YES, but it ain't happenin'.......
Is there a better way to go about this, or can someone suggest correct syntax to me?
View 10 Replies
View Related
Feb 13, 2007
Greetings,
I have a search form with a list box that displays query results. Double clicking on a row in the list box opens a detail form with the detail of the selected record. The other way to get to a detail form is by clicking on a command button that displays the detail of each of the records in the query result, one by one.
The problem is that there are many more fields in the detail form than the query that is its' control source. Since the detail form displays an individual record, it seems like it should be able to go into the table and fetch the rest of the data. No?
View 2 Replies
View Related
Jun 21, 2005
I have created my query based on a table in order to find how many data are in the list, then I have added a textbox in one of the form and I added this line in the control source:
SELECT AcademicAudioCount.Total FROM AcademicAudioCount;
This is what I get: #Name?
But its not working, any help.
Thanks.
View 2 Replies
View Related
Mar 26, 2006
ok guys very simple question
i have manually built my form in Access 02. Now i want to bind a particular control to a table - ie. when the user hits 'Submit' the record will get written to the correct tables. simple data entry
i have a table called tblShipping, in which there is a field called Goods. in the control source i have the expression: =[tblShipping]![Goods] but this is not working. in the text box (in normal view of my form) appears: "#Name?"
what am i doing wrong?
View 1 Replies
View Related
Jun 20, 2006
Hi everyone,
This is a very simple problem, and it seems to me like it should work but it doesn't. On my form, I have a field called [mindate], which looks up the earliest date from a table. I also have a field called [maxdate] which looks up the latest date in my table. These both work great. My third text box [difference] is supposed to find the difference between the two above dates in days, but it doesn't work.:eek: The control source of this [difference] text box is this:
=DateDiff('d',[mindate],[maxdate])
Any suggestions?
Chris
View 4 Replies
View Related
