Modules & VBA :: Cancel OnExit Event When Another Command Button Is Pressed
May 8, 2015
I have a form with a control for the user to enter some data and then two command buttons 'OK' and 'Cancel'
For the OnExit event in the control I have a procedure that check the user input and if incorrect, opens a message box with an error message asking the user to correct the data. It then cancels the event so the focus remains in the current control.
However if the user presses the 'Cancel' command button on the form to cancel & close the form, the OnExit event for the current control still fires and asks the user to correct the data.
In my code in the control, how can I recognise that the Cancel command button has been pressed, so I can cancel the OnExit event and close the form?
View Replies
ADVERTISEMENT
Aug 21, 2013
I have a form (Pipeline) with an on load event that automatically directs the user to a new empty record.
Code:
Private Sub Form_Load()
DoCmd.GoToRecord , , acNewRec
End Sub
Now my problem is that I am trying to design a 'search form' that will allow the user to look up a specific record in the main form by pressing a command button. Creating the search form is easy enough. I cannot figure out how to override the on load event in the main form when pressing the command button.
As it is right now, the button opens the form and then go directly to a new record.
View 5 Replies
View Related
Jun 26, 2013
I was wondering if you can call a textboxes onExit event from another form? On my form a user enters a search criteria into a text box and when they exit the textbox the results are displayed in a listbox. This form is a subform on my main form. I want to be able to call this onExit method from the main form. Is that possible? When I put in txtSearchBox_Exit, I got an error saying Sub or Function not defined.
View 5 Replies
View Related
Sep 17, 2013
I have a form which displays some product details and a stock level. The subform below it allows entry of a quantity to issue and a control button to run a small macro, write a movement record to a stock movement table and then close the form. This works fine.
But the user can also cause the movement record to be written just by keying in a quantity and tabbing out. If this is done several times it writes several movement records and doesn't close the form. I want to ensure that record is only written when the command button is pressed.
Perhaps there is a more conventional or better way of achieving what I want but I can't think of it.
View 2 Replies
View Related
Aug 13, 2015
There are 4 unbound dropdown list box that will have a default value of empty string. All 4 must have values entered (data is required).Once all 4 are required - the bottom 5 text box will become enabled (optional data).Forcing the user to click on a Validation Button
Some users type then use the mouse to select the next.Other users type to select then tab.The trick is: After filling in the 4th listbox and validating all 4 have values, the event must trigger code to enable the 5 optional text boxes below.This provides a seamless data entry environment.
I have been doing this in other places, but the transisition after the last required field is complete gets ugly.If Trim(cmbBoxname1 & "") = vbNullString ' check all 4..If it is the 4th one, the event seems not to happen quick enough for the bottom 5 text boxes to be enabled so the user can continue with data entry.
View 9 Replies
View Related
Jun 16, 2014
I have an option group with 2 buttons in it, yes and no. It is set to default to No, but if someone hits Yes I want it to enable or turn on the next option group. Would just simply changing visible status disable it? Because I have a series of codes set up based on the second option group which read as:
Code:
Private Sub NumberOfAdditionalSites_Option1_GotFocus()
Me.AdditionalSitesLabel1.Visible = True
Me.AdditionalSitesText1.Visible = True
End Sub
[Code] .....
I do not want these to be visible if the initial option group is still set to no.
View 4 Replies
View Related
Jan 7, 2014
I am trying to use a Combobox BeforeUpdate Event to achieve a required result.
I have two combo boxes inside a frame. The first is a year number 2011, 2012, 2013, 2014
The Second is the Week No ranging from 1-52, but 1-53 in some cases and this updates accordingly with the year number selected.
When the user has selected Week 53 and then changes the year to a year where only 52 weeks exist I want to Cancel their event.
I have already made a function to determine if 53 weeks exits however when I come to do the Cancel Event, the combobox for the year doesn't change back. It stays on the users new selection.
Below is the code that I am trying to use:
Private Sub cmbWeekNoFromYear_BeforeUpdate(Cancel As Integer)
If UpdateWeekNoSelections Then
Cancel = True
Me.cmbWeekNoFromYear.Undo
End If
End Sub
'cmbWeekNoFromYear is the name of the combobox which holds the year number
'UpdateWeekNoSelections Simply returns True if I want the users change cancelled for cmbWeekNoFromYear
View 7 Replies
View Related
Oct 8, 2013
what would i write in the onclick private sub of my 'btnCancel'.i need it to do a number of things depending on whether there is data entered in the form fields or whether its completely empty, is there is data being entered in some fields and the cancel button is clicked it should ask whether the user wants to lose all current data as a msgbox, or if there is completely no data in any of the fields and the cancel button is clicked it shoud take me make to the main form where the rest of my buttons work, which is "inmode normal"
View 3 Replies
View Related
Apr 18, 2006
Can someone give me a jump start with code for changing forecolor...
On one form (form 1) I have a command button (cmd34) which has its text in Black (forecolor 335543)
On another form (form 2) I have a checkbox (chk45)
When the check box is checked I want the text on the command button to change to red (forelolor 255).
1. Where do i put the code? On the second form (On Close) or on the first form (On Open) or ???
2. Is the code something like
If me.chk45=true then
Cmd45.forecolor=255
Or am i just making that far too simplistic?
View 1 Replies
View Related
Jul 17, 2013
I'm looking for a button that cancels an entry on a form. I want everything within that form to be cancelled including the Primary Key field. I currently have a button the uses the me.Undo code and then automatically closes, however this only clears the data that has been entered by the user. So when the user re-opens the form the primary key field is showing a 2 instead of a 1.
View 3 Replies
View Related
Apr 8, 2013
I have a tabbed form in a navigation form with a chart on it. The records source of the chart is a query. The query runs when you click the tab and takes a long time. I changed the Row Source of chart to "" and that eliminates the query running on form load. I've read many posts on changing that row source when a command button is clicked. I tried
Code:
Me!Suspend_Trending_Dashboard![chart].RecordSource = suspend_trend_CHART
in the onclick event of the command button. This doesn't work. I've tried many variations of the syntax. I don't know if I have to tell the query to run after the row source is changed.
On a side note, the query criteria is based on beginning and end dates entered into text boxes on the form. This all works if the query loads when the form is opened.
View 6 Replies
View Related
Mar 24, 2005
I dont want to remove the close button in access, but i cant figure out a way to cancel the quite event if there is dirty data.
View 1 Replies
View Related
Aug 23, 2007
I have docmd.sendobject that opens Outlook to send an email, etc. However if the user does not send the email and cancels out of the message Access is asking the user if they want to debug. How can I simply have Access return to where the user was before they hit the command button that launched Outlook. I don't want them to go into the code. In fact I don't even want a message of any type - I thought I could trap the cancel somehow and code for it...
Thanks,
Ken
View 4 Replies
View Related
Jan 26, 2005
i dont want a user to be able to change a value in a combo box if a textbox is not null.
im not sure what to add on the onenter event. is there not somthing like cancel=true
View 2 Replies
View Related
Mar 3, 2006
Hard to search for ths really, but I have a form with two buttons: Save and Exit.
Save saves the current record
Exit does an Undo if the form is .Dirty
If I cancel from the title bar, then the records are saved and the Close event is activated.
What I need is to detect if the Cancel box was clicked so that I can do an Unload before the form closes
TIA
Liam
btw, I'm getting the hang of this. It's a lot different from mainframe Cobol but it's fun to learn new stuff.
View 1 Replies
View Related
Aug 8, 2013
Here is my problem
In namefield_AfterUpdate, I check for duplicate name entries and notify the user if any are found - they are prompted as to whether the duplicate was accidental or intentional and continue working. This works fine for normal circumstances.
However, if the user updates namefield so that the value is a duplicate of an existing name in the database, but then presses Cancel (or Delete), then the namefield_AfterUpdate is fired and what button they pressed. The button Click code does not run first.
How can I tell if the user updated the name, but then realized they didn't want to save, and then clicked 'Cancel' (or any button) and the code should really skip the duplicate check validations/messages?
Running XP or Win7 with A2007
View 3 Replies
View Related
May 10, 2013
Is it possible that once the command button "Send Cost Request" in red is pressed it will change to green?
View 3 Replies
View Related
Aug 3, 2005
Is there a way to cancel a form's close event? If a user clicks the form's close button, I want a msgbox to ask if they are sure, and if yes continue and close, else cancel the forms close event. I know how to perform the msgbox and the if statement. I can not figure out how to cancel the form's close event.
View 2 Replies
View Related
May 23, 2013
I have an app that is browsing a survey. When the survey is in simple 'browse' mode, I want to be able to emulate the effect of a SkipResponse. (A SkipResponse is when selecting a particular value causes the normally sequential processing of survey questions to become non-linear. A sort of If Response = thisvalue then next question is something else) I can 'request' the SkipResponse by using Ctrl/Alt click, and then emulate returning from the target question by using Ctrl/Shift Click.
My problem is that I want to do the same thing (for a return) by allowing Ctrl/Shift on the Exit button. If I just use a regular mouseup evvent, it will complete, but will then go ahead and run the code for the Click event, to exit the survey. What I would like is to be able to cancel the processing of the Click event from within the handler of the MouseUp event.
View 2 Replies
View Related
Jan 25, 2005
I am trying to get my program to cancel a send e-mail command if certain things aren't filled out. Instead it is supposed to pop up with a message and then put the pointer in that field. The message box pops up, but the e-mail command is not cancelled. Can someone please tell me what I am doing wrong?
Private Sub SubmitAddCmd_Click()
On Error GoTo Err_SubmitAddCmd_Click
Dim stDocName As String
Dim strEmail As String
Dim strMailSubject As String
Dim strMsg As String
Dim strCopy As String
'Make sure MMS Job# is entered
If IsNull(MMSJob) Then
MsgBox "Please enter the MMS Job#"
[MMSJob].SetFocus
Cancel = True
'Make sure Client's name is entered
ElseIf IsNull(Client) Then
MsgBox "Please enter the Client's name"
[Client].SetFocus
Cancel = True
'Make sure job name is entered
ElseIf IsNull(Job) Then
MsgBox "Please enter the job name"
[Job].SetFocus
Cancel = True
'Make sure CSR name is entered for this job
ElseIf IsNull(CSR) Then
MsgBox "Please enter the name of the CSR for this job"
Cancel = True
'Make sure date job submitted button was clicked
ElseIf IsNull(Submitted) Then
MsgBox "Please click on the 'Date Job Submitted' button"
'[SubmittedCmd].SetFocus
Cancel = True
'Make sure mail date was entered
ElseIf IsNull(MailDate1) Then
MsgBox "Please enter a mail date for this job"
' [MailDate1].Value
Cancel = True
End If
'E-mail booking sheet to scheduling office in snapshot format
stDocName = "BookingRpt"
strEmail = "jhutton@merklenet.com;jsayers@merklenet.com"
strCopy = "rgarneriii@merklenet.com;"
strMailSubject = MMSJob & " " & Job
DoCmd.SendObject acSendReport, stDocName, acFormatSNP, strEmail, strCopy, , strMailSubject
Exit_SubmitAddCmd_Click:
Exit Sub
Err_SubmitAddCmd_Click:
MsgBox Err.Description
Resume Exit_SubmitAddCmd_Click
'Add new record
DoCmd.DoMenuItem acFormBar, acRecordsMenu, acSaveRecord, , acMenuVer70
DoCmd.GoToRecord , , acNewRec
End Sub
learnasugo
View 2 Replies
View Related
Aug 20, 2014
When user enter the data other than date field or when date field remain empty and user press the Add button, it is giving error.
(Error 3075)
Syntax Error in date in query expression '#'.
while same code is working for text field. but it is not working for date field.
If (Me.rdate) = "" Then
Exit Sub
End If
View 14 Replies
View Related
Jul 16, 2012
How to restrict the updation of a record while entering until a save button is pressed on the form ???????? is it possible without the vba ?
View 10 Replies
View Related
Jan 7, 2015
So what I've basically got here is a form with 4 combo boxes and a button that when clicked will filter the results of a table (which is a subform/subreport) based on the values inside the combo boxes. So the problem I have is that when I open up the form it displays a fully filled table but I just want to display the row names and a blank table until the filter button is pressed.
View 2 Replies
View Related
Jan 26, 2005
Folk,
I'm using the default command to add a new record in a table:
DoCmd.GoToRecord , , acNewRec
The question is: How I can cancel the new record inclusion on table? It's possible?
Thanx a lot,
Maikon
View 2 Replies
View Related
May 23, 2014
I have the below VBA in a from for it to filter the records below based on the criteria:
Private Sub Search_Click()
Dim strWhere As String
strWhere = IIf(Len(Me.AssignedTo & "") <> 0, "([AssignedTo] Like ""*" & Me.AssignedTo & "*"") AND", "") & _
IIf(Len(Me.OpenedBy & "") <> 0, "([OpenedBy] Like ""*" & Me.OpenedBy & "*"") AND", "") & _
IIf(Len(Me.Status & "") <> 0, "([Status] Like ""*" & Me.Status & "*"") AND", "") & _
[Code] ....
When I click the search button nothing happens, is there something wrong with my code??
View 4 Replies
View Related
Dec 8, 2014
I have a table EmployeeInfo containing three fields
EmployeeId
Name
FatherName
I have created form for this table.
I do not want to use autonumber for employeeid for some reasons. I want to place a button along employeeid test box on form.
User will click on the button it will get max employee id from employeeinfo table and add 1 and copy it into employee id text box.
What will be the code for button click event.
View 2 Replies
View Related
