Modules & VBA :: Check For Record Existence - Object Variable Or With Block Not Set Error
Mar 13, 2014
I have some code that will run if I am populating an empty table(no duplication's possible) but now I am trying to create a Sub to check for existence of a record and handling it going forward.
Anyways the big picture is looping through a text file and placing data where it needs to go. The code follows including some comments point to the issue.
Code:
Sub PutinNewTag(TableIn As String, Tagtype As String, textline As String)
Dim strSQL As String
Dim NameIn As String
Dim TagName As String
Dim Db As DAO.Database
Dim rstin As DAO.Recordset
Error 91 - Object variable or With block variable not set
I am getting this error telling me that an object variable is not set.
I know which variable it is but when I step through the debugger it sets the variable and all is fine? Issue is that public variable of a class is not getting set when the VBA Editor is not open?
This code runs fine the FIRST time, however trows up a message the SECOND time it is run.
The error is on the line ".Range"
I am trying to sort records which have been exported to Excel.
Dim LR As Integer LR = 5 Set xlApp = CreateObject("Excel.Application") xlApp.Visible = True Set wbRef = xlApp.Workbooks.Add With wbRef
wbRef.Activate .Worksheets("Sheet1").Activate With ActiveSheet .Range("A2", .Cells(LR, "O").End(xlUp)).Sort Key1:=.Range("C2"), Order1:=xlAscending, Header:=xlYes End With end With
I have two reports running off of the same crosstab query. I copied one report to make the second report, then modified the second report to change the background of column fields satisfying certain conditions. These lines of code were added to the Detail_Format section, in color below. The report with the extra code lines does not error--the original report errors.
Code: Option Compare Database ' Constant for maximum number of columns EmployeeSales query would ' create plus 1 for a Totals column. Here, you have 9 employees. Const conTotalColumns = 11
[Code] .....
If I say OK (rather than debug) after the error message, I can then click the button for the report again and it runs without complaint. And, as I said, the report with the added code never errors.
I need to export a table as a text file but using the outputto or transfer text options do not produce the file format I want. If I export the file as Excel and then save it as text it's OK so I copied the following code to automate the procedure but get an error 'Object variable or With block variable not set.
I have a networked database. It is accessed with computers that have both Office 2002, and office 2003. I get the following error message on computers with Office 2003:
"Object variable or With block variable not set"
It happens occasionally and the problem generally fixes itself so I dont think there is anything wrong with my coding.
And when it happens on the computers with office 2003 the ones with office 2002 can open the database fine.
The following block of code was working great until I came into work this morning. This routine is called from the OnClick event of several combo boxes. When it does, I recieve the error listed above (Object variable or With block variable not set) on line:
If Me.cbxAss_Filter <> "All" Then
Any ideas? I'm running on no sleep in the last 24 hours so I'm sure I'm missing something simple
The code itself checks the contents of a form and builds a string of conditions which I apply to the Form's filter property to filter records.
Code:Public Sub CreateFilter() '************************************************* **** 'Name: CreateFilter 'Purpose: Generate a string to filter the form 'Inputs: None 'Outputs: None 'Instigates: Me.Filter ' 'Updated: 11/30/06 'By: Chris Lounsbury '************************************************* **** 'Vars Dim strFilter Dim lngLength As Long strFilter = Null strFilter = "" 'Each filter box has its own check for contents If Me.cbxAss_Filter <> "All" Then strFilter = "assigned = '" & Me.cbxAss_Filter & "' AND " End If If Me.cbxAction_filter <> "All" Then strFilter = strFilter & "action = '" & Me.cbxAction_filter & "' AND " End If If Me.cbxStatus_filter <> "All" Then strFilter = strFilter & "status_rsrch = '" & Me.cbxStatus_filter & "' AND " End If If Me.Combo34 <> "All" Then strFilter = strFilter & "rims_flags = '" & Me.Combo34 & "' AND " End If If Me.cbxAAMB_filter <> "All" Then strFilter = strFilter & "aamb = '" & Me.cbxAAMB_filter & "' AND " End If 'Check if filter string was built If strFilter = "" Then Me.FilterOn = False Else 'Determine length of Filter String 'minus the trailing ' AND' lngLength = Len(strFilter) - 5 'Chop off ending ' AND' and set the form filter If lngLength <= 0 Then Else Me.Filter = Left(strFilter, lngLength) Me.FilterOn = True End If End If 'debug 'MsgBox (strFilter) End Sub
I am creating a 2 level report to confirm an order. Main report already created, runs successfully called as subform/subreport under "OrderDetails" form. Linked to master using Order.ID. There are two versions of the confirmation report that have different layouts for different program types.
The hangup comes when I try to add a "Class Dates" subreport. It lists dates of individual classes and Skip dates. I have created the subreport as "srClassDates". When I add it to the main report, it lists the records. However, when I try to link it to the Main report, an error message box appears with the "object variable or With block variable not set".
I have tried rebuilding both the main and subreports, rebuilt the query, have not found anything that changes the result.
Linker has been working successfully on other subforms. Report with groupings works fine, but I need data from 2 tables both linked to order.id.
I get this error message, " object variable or with block variable not set", when I'm in the design view of a form wanting to use the command button wizard. Using a brand new database/blank I imported a table from my database in question. I then tried to make a new form and put a button on it. It worked for awhile but then when I close the database and reopen it to add another button to the same form, I get the error message again. It isn't a problem that is specific to my homeschool database. It affects all the database I use/maintain as well as any new "test" databases I've made trying to figure out this problem. I looked at references before and after the error occurs and there is not difference. I've also looked at code but don't see anything code that requires variables to be defined. In the case of the test database with one table and one form there is no code to look at until I make a button before exiting and even then, I don't see anything weird.
I would appreciate any help you can offer.
I've attached the original database I was working on when the problems began.
Is it possible for a database program to adjust security levels on certain reference libraries when installed on ones computer, thus making all other database act up that are using those libraries?
I have the below code that seemed to work until I tried to add the Loop to it. Now, every time it gets to the piece of the loop with the words Cells.Find, I get an error stating "With Block or Variable not set". I don't understand what the problem is. There is no "With Block" and the variable is set. How can I get this to work?
Code: Function ClearColumns(xlWS As Object, ColumnRangeToClear As String) xlWS.Range(ColumnRangeToClear).ClearContents End Function Public Function SendTQ2XLWbSheet(strTQName As String, strSheetName As String, Col As Integer, strFilePath As String, FirstCellStr As String)
I am just in the middle of writting a little bit of code that will go through each record in a query and export it into a word table. It's in the early stages but all was working yesterday. I've come to it this morning and ran it and now I get an error message;Run Time error 91: Object Variable or With Block Variable not set.
Code:
Private Sub Command15_Click() Dim MyDb As DAO.Database Dim rsLogin As DAO.Recordset Dim ObjHead As String Set MyDb = CurrentDb() Set rsLogin = MyDb.OpenRecordset("query here")
I have an Access 2010 db which has a load of global variables of type Boolean. The values are different for each machine the database is stored on, so I have a linked table to a separate Access mdb. On startup the database opens the linked table and assigns values to each variable.
However I need to differentiate between a valuable value of False and the variable having not been set. As boolean variables default to False, this is a problem. One option is to use data type Variant, but I know this is not efficient. I am considering using data type Byte instead of Boolean, with 1 as False and 2 as True.
I have a process that reads a list of files sequentially and then processes them .... As each file is processed, its name (strfile) gets written to a Table (Vault.[Processed_file])
I want to verify if the file exists in the table prior to processing it - if it exists, I won't process it again ...
Basically I have a form where a user has selected a couple values from a dropdown element, and entered a few other text values into the form. I am then trying to grab the values and append them to a table.
Code: Private Sub btnSubmitInputVendorPerformanceForm_Click() 'Button Is part of frmInputVendorPerformance Dim ValueCheck As Integer 'Increments to make sure no errors in entry Dim ErrorShow As String Dim YesorNoAnswerToMessageBox As String Dim QuestionToMessageBox As String Dim DeliveryRate As String
Somehow it doesn't take this variable msoFileDialogSaveAs. It tells me it's unknown.
Code: Public Sub Command2_Click() On Error GoTo MyError3 Dim filelocation As Variant Dim g As Object Set g = Application.FileDialog(msoFileDialogSaveAs)
I am trying to create a txt file to import into our accounting software. I get the file (its blank), but it fails on the WriteLine and i get the run time error. I have a command button on a form that the user will click to export the file.
Private Sub cmdExport_Click() Dim cnn As New ADODB.Connection Dim rst As New ADODB.Recordset Dim strPath As String Dim strPathGB As String
I have a strange behaviour on a module which reference to Microsoft Outlook Object Library 14.0. The below code got an error 461 on the folderoutlook.display code,i.e. the method is not found. The funny thing is that the same code gives no problem in another accdb file, exactly same code with same reference on same machine.
Set appOutlook = GetObject(, "Outlook.Application") Set appOutlook = New Outlook.Application Set namespaceOutlook = appOutlook.GetNamespace("MAPI") Dim folderOutlook As Folder Set folderOutlook = namespaceOutlook.GetDefaultFolder(olFolderInbox) FolderOutlook.Display
I've got a form that takes the members from my members table and allows me to take attendance. I have it set up with toggle buttons in the footer (so we can see what class we're currently looking at) and I want to apply two filters when we click on a button. The two filters are "SS_Roll = Yes (or True)" and "SS_Class = AD1 (or whatever the class is)". I did some research and found one code for it, but now that I'm getting the missing object error and upon further research, I'm starting to think the code I found was only an excerpt. Below is the code I currently have. It highlights the first line when I hit debug.
Code:
Private Sub OptAD1_Click() Table![MembersTable].FilterOn = True Table![MembersTable].Filter = "[SS_Roll] = " & True And "[SS_Class] = " & AD1 End Sub
I have used the following script to export a subform to excel but it isn't working for a report.
The report name is spelled correctly etc... but the error message keeps saying error 2465 or if I enable the error handler it says application defined or object defined error.
I don't want to have to export the data to a table first, but if I have to then I guess I will have to.
Code: Sub fFunctionNameExportExcel(ctrl As IRibbonControl) 'print to excel Dim rst As DAO.Recordset Dim ApXL As Object Dim xlWBk As Object Dim xlWSh As Object Dim fld As DAO.Field Const xlCenter As Long = -4108
I am using Windows 8.1 64 bit system. Into attached access file (OfferStudy.accdb) ,trying to load an activeX TreeView control by defining into a form module. First, I created an empty form and activeX Treeview control.When I define tv variable As TreeView as created in application, it is changing as Dim tv As treeView instead of TreeView. After my code is completed,an error message ("user-defined type not defined") is returning as shown in attached (DebugError.png)file.
I suppose that there is some conflict on creating activeX control on my Access 2013 application.
I am trying to pass a boolean variable to a class module
Code: Set rps.ViewS = View
the code in the module that this in theory is calling reads as
Code:
Private ViewC As Boolean
Public Property Set ViewS(ByRef ViewA As Boolean) Set ViewC = ViewA End Property Public Property Get ViewS() As Boolean Set ViewS = ViewC End Property
However I am getting the error message
Quote:Definitions of property procedures for the same property are inconsistent, or property procedure has an optional parameter, a ParamArray, or an invalid Set final parameter.
