I have a calendar to let the users pick up the days and will be save temporaly in a table to print but i only can display the current mouth in calendar, went the user change the mouth the color of the boxes change to normal,in attache i send the BD, In resume, the users select the days in calendar and went change from one mounth to another the days picked stay with color.URL...
View RepliesHow can I add a full row of color, if let's say I have 5 columns when a user clicked a button?
Docmd.runsql "INSERT INTO tbl ("blank","blank","blank","blank","blank") ... tablerow.backcolor = green ?
Any way to change a datasheet's fore color? I open up a datasheet and the forecolor is the same as the backcolor.
View 2 Replies View Relatedhow I can set a color on table column formatted as rich text and memo. For instance this table has 4 different columns of remarks, one from each engineering operating center. Remarks_1, Remarks_2, Remarks_3 and Remarks_4. Each one of the 4 operating centers enters the remarks in one of these fields. On the Dashboard report, what I do is I get all these 4 fields and merge in 1 because the report is already narrow due to several other columns as well. So there is a report combining all data : =Remarks_1& " -"&Remarks_2&" - "&Remarks_3&" - "&Remarks_4 under Remarks.
The point is that the Dashboard has colorcode, Orange for Remarks_1, Red for Remarks_2, Blue for Remarks_3 and Green for Remarks_4. All these fields are memo on rich text format. On the form I have set the color of each field, however the color doesn't get set on the table as well, but only on the form fields. How can I set a defined color to each field on the table? And also when I get all data in one column, I would see all different colors.
on one of my forms I want the option to change the backcolor of a label and no matter what I try it wont work right.
Code:
Me.ColorlvlOne.BackColor = vbBlack
I created a subform in side a form where I have some data. The idea is to fill in the row with a color if a value is met, like "Reset".Conditional format is working (for one field), but in Access 2003 I can only have 3, and I have like 6 values to choose from.I use the below code to no avail:
Code:
Option Compare Database
Private Sub Form_AfterUpdate()
If Me.Legend = "Reset" Then
Me.Legend.BackColor = vbRed
End If
End Sub
I'm using conditional formatting on a datasheet to change the background colour of a cell. Is is possible to retrieve that colour?
View 6 Replies View RelatedI have a problem with seting up color for my pivot chart. First I set up color I want(pic 1).but then when I use filter for End Customer all the colors will revert back to default settings (pic2).Is there a way how to force it so it sticks with colors I chose? VBA code?
View 8 Replies View RelatedI have some code to check a combo box if a date field is filled in, then the combo box can't be empty.I can make the error message appear, but the combo box does not want to change color and it does not recognize any other than value..This is the code that I have, and it does not work like I wish it could.(I took the database over from some one else and need to make improvements on it. the field names where not created by me).
Code:
Private Sub cmbCurrentStatus_AfterUpdate() '<<<<<<<<<<<<<<<< Working on >>>>>>>>>>>>>
If IsNull(Me.[STEP 1 4 check current status]) And Not IsNull(Me.[Checked__date_]) Then
MsgBox "Checked (date) can't be empty if Current Status is filled in!", , "Incomplete Form!"
Me.[STEP 1 4 check current status].Value = RGB(255, 0, 0)
Else
Me.[STEP 1 4 check current status].BackColor = RGB(255, 255, 255)
End If
End Sub
I'm using Access 2010. I need to calculate a score based on values selected in a table by looking up corresponding values in other tables. I have a "Project" form to create new entries into the Project table (see Table 1). When I create a new project record, I will select values for the Payback and Need fields by selecting options from a list. The Payback list is pointed at Table 2 and the Need list is pointed at Table 3. In the below example, I created the "ABC" project and selected "1 year" for the Payback field and "Repair" for the Need field. Pretty simple.
Now that I have the "ABC" project loaded to my Project table, I'd like to create a report that will show a "score" for this project. The score should be calculated as follows: Payback Impact + Need Impact. In this example, the score should be 30 (Payback Impact of 20 + Need Impact of 10).
We have a navigation page with 5 tabs and several navigation buttons underneath their respective tabs linking to reports.
In the main part of the navigation page we have 17 search parameters (text boxes and combo boxes)that the user can use to sort through all the reports we have in the different tabs.
What we would like to do is to have the label text to change to "red" if one of the 17 fields are "required", remain "black" if it is included in the report but not a mandatory search parameter, or turn "light grey" if that parameter is not included in that report.
For example:
My search parameters are: people, phone, and cars
If I were looking at a report of people that included addresses, phones, etc...name and phone would be required search parameters. However, even though I can search by car, it is not in this particular report and the label text should be greyed out. (If the actual text box could go inactive that would be even better).
I have read about buttons being turned colors based on a drop down box choice, but I have not been able to find anything about using a navigation tab subform button to make the colors change in the main navigation form.
I am attempting to adjust the font color of a date field on a report based on the value of two other fields. I have the below code set in the "On Format" property of my detail section - however it does not work when I open the report to view.
Private Sub Detail_Format(Cancel As Integer, FormatCount As Integer)
If Me.Frequency = "Annually" Then
If Me.ClassDate < (DateAdd("yyyy", -1, Date)) Then
Me.ClassDate.ForeColor = vbRed
Me.ClassDate.FontBold
End If
End If
End Sub
I would like to change color of border button on mouseover event. How it to do?
View 4 Replies View Relatedhow to change background color of MSAccess Reports using VBA? How can I do border coloring. What are the vba codes for all color options like light green, light blue etc. How to change the font type to bold etc using vbaI did some changes to text box coloring in Detail Section on format click event.
View 3 Replies View RelatedI'm using Access 2010. I'm passing a string into the OpenArgs of my report - works fine. In the report there are 3 rich text fields which may contain the text I passed in, and if so I want to change the color of that text to red so it stands out.
The value passed to the report changes so I'll need to use VBA in the detail's format section to check each of the 3 rich text fields.
I have the following dataset in a table called NR_PVO_120. How do i pick out a number (which can change but let's say, 6) of UNIQUE OtherIDs without excluding any OtherIDs under any fax numbers?
So, if you pick OtherID from Row7 you then also must pick OtherIDs from rows 8 and 9 because they have the same fax number. Basically, once you pick an OtherID you're then obligated to pick all OtherIDs that have the same fax number as the one you picked.
If the number requested (6 for this example) isn't possible then "the closest number possible but not exceeding" would be the rule.
For example, if you take OtherIDs from rows 1-10 you will get 6 unique OtherIDs but row 10 shares a fax with rows 11 and 12. You either need to take all 3 (but that will raise the unique count to 8, which isn't acceptable) or skip this OtherID and find one with a fax that has no other OtherIDs and that isn't on the result set already. My result of 6 UNIQUE OtherIDs will need to contain ALL OtherIDs under any fax the existing OtherIDs are connected to.
So one solution is to take rows 1-6, 26. Another is to take rows 1-4,10-14.
There will be many possibilities (the real dataset has tens of thousands of rows and the number of people requested will be around 10K), as long all OtherIDs connected to all faxes on the result set are part of the requested number (6 in this case) any combination would do.
A few notes.
1.Getting as close as possible to the requested number is a requirement.
2.Some OtherIDs will have a blank fax, they should only be included as a last resort (not enough OtherIDs for the requested number).
my table (NR_PVO_120)
Row OtherID Fax
1 11098554 2063504752
2 56200936 2080906666
3 11098554 7182160901
4 25138850 7182160901
5 56148974 7182232046
6 56530104 7182234134
[code]....
A few sample outputs
one solution is taking rows 1-6 and 26.
OtherID
11098554
56200936
25138850
56148974
56530104
56148975
Another solution is taking rows 1-4 and 10-14.
OtherID
11098554
56200936
25138850
56024315
56115247
56148974
This is for a fax campaign, we need to make sure no fax number is faxed twice, that all people connected to that fax number are contacted under one fax sent.
I would like to know if this is possible using VBA ( or other method)
I want to determine the back color o a cell based on a color value stored in another cell in other word
backcolor of cell A = the value of cell B
So if I change the numbers of cell B (which is color codes) , backcolor of cells A change accordingly and it will have the color specified in cell B.
i have one table in which ID is Primary ID with Different Values
Like
ID NAME PAN
1 A X
1 B Y
1 A X
2 C Z
2 C G
3 D U
it shows that ID 1 having 2 Name (A& B,with PAN, X & Y ,respectively).how can i get this that ID having More than 1 Value like 1 and how can i select only these records ID which having more than 1 value and how can i update values for 1 ID.
I have a lookup value in a table, and I would like to remove all values of the lookup value from vba. How can i do it via vba? i've been trying to do it in a query but i have always some errors and i can not remove them.
View 2 Replies View RelatedCurrently, we have a table which contains a field for each type of training that can be taken (FUT1, FUT2, ...). Once an Instructor has taken one seminar, the table is populated with the date taken, via their employee number (the key) through an update form.
Now, the company wants the paper training reports to turn into a digital part of this database. As envisioned, the form and associated table will have combo boxes with pre-determined training types (FUT1, FUT2, ...). The date would be typed in.
The problem I see is getting the dates and training type from the future table to populate the existing table in the correct field for the correct Instructor.
In addition, there exists a report which prints out the training dates for each Instructor at each school. This is will still be in use.
Private Sub TestButton_Click()
Dim bc As Long
bc = TestButton.BackColor
TestButton.BackColor = bc
End Sub
Somehow this changes the color of the button from light blue to a darker blue. Yes, this has no real purpose, but it is a test to see why be app. isn't working. I store the color, but it back and it's not the same color.
Hi all....
I have been beating my head for 2 days on this. Any help will be GREAT!
I have 2 tables: CLIENTS and RELATION
NAMES has the client_ID, first_name and last_name along with other information for clients. RELATION is how the clients fit with each other. RELATION has relation_ID, Relations_description and up to three fields where we can enter the ID of clients from the client table called Rel1_ID, Rel2_ID, and Red3_ID. Now all the three rel_IDs come from CLIENTS and stores only the client_ID. There are multiple relationships.
How can I display the names and not the IDs for the clients?
I am able to display only one client name. I need this for form as well as report. I can do dlookup for form but don't know for reports. I am thinking that if I have it in the query, then I can use that for the form as well as reports.
I am able to show the the name for one client by running the following qry. But I am not able to modify that to show the other 2 names.
SELECT RELATION.Team_Name, RELATION.relations_Description, RELATION.rel1_ID, RELATION.rel2_ID, RELATION.rel3_ID], [client.f_name] & " " & [Client.l_name] AS Client_Name
FROM RELATION, CLIENTS
WHERE ((([relation.rel1_id])=[client.client_id]));
Hi,
I have a situation and i do not know how to handle it.
I am developing an application for a lawyer. In the data base i have the following tables: Files, the people table (that are involved in a lawsuit), and other tables. The problem is the following: in the people table, beside the primary key i have another unique element that is social security number.
In the files table beside the primary key another unique element exists: the number and date of the file (File 1 from 15.02.2006). A lawsuit file can have more law terms: today it has one law term and maybe next week another law term so i must have the same file many times in the table with the same code and another date, but i cannot add the same file many times in the data base because a file has data about one person and the social security number of the person is unique.
If anyone can offer me a solution it would be good.
Thank you!
I have three tables: tblProducts1, tblProducts2 and tblProductSales.tblProducts1Code CostABC 20BVC 35ABC 30tblProducts2Code CostABC 10BVC 55ABC 20tblProductSalesCode RevABC 70BVC 25ABC 20BVC 15DCC 33I want to produce a query that looks like this:Code Rev Cost ProfitABC 90 80 10BVC 40 90 -50DCC 33 0 33How can I do this?Thanks,Jon
View 1 Replies View RelatedI have been reading previous post s regarding the storing of calculated fields. Basically everybody says don't do it. However, if I don't I am not sure how to achieve what I need to achieve.
I am storing data on tool vibration levels. Data is input for X, Y and Z axes and a vector sum (total) is calculated on the fly using a query. So I only ever store X,Y and Z.
Ultimately I am looking for this database to be able to give me useful statistical outputs in particular a range of vector sums for a tool type. If I don't actually store the vector sum for each test then how I am ever going to report a range? The data would never change for each test as these become statictics, it's not the same as working out rates for example which may vary according to parameters.
What is the best way to do this?
Hello everybody! i want to create a table consisting of 2 columns. one column may contain constant values and the other has to contain dynamic values (values of the second column must depend on the values of the first column). For example if the constant of the first column is ID then the variable of the second column will be ID+5. Something like that below
Column 1 Column 2
ID1 ID1+5
ID2 ID2+5
ID3 ID3+5
. .
. .
. .
Could anyone give me a tip about that? Thank you in advance...
johann