Compile error: Method or data member not found
Code:
Option Compare Database
Option Explicit
Dim intItems As Integer
Dim strName() As String, datBirthDate() As Date, intAge() As Integer
Private Sub Form_Load()
intItems = Val(InputBox("How many names do you have?", "Name List"))
[Code] .....
i have the following code in a function but when i want to compile it i have the following code will be blue i have error in this line:
.NamedParameters = True
the error message is this :
method or data member not found
my code is as following:
Function Get_Bearbeiter_Detail(ByVal vBearbeiter_Code As String, Optional ByRef vBearbeiter_Name As String, Optional ByRef vReadOnly_Flag As Boolean, Optional ByRef vAnalyser_Flag As Boolean, Optional ByRef vAdmin_Flag As Boolean) As Boolean
On Error GoTo Err
DoCmd.Hourglass True
Dim rst As ADODB.Recordset
[code].....
Hi,
Trying to run a template on a new computer.. it works on other computers, but in this case it gives me this compile error.. kind of strange.
It comes up here-
End With
Selection.PasteAndFormat (wdPasteDefault)
Selection.MoveUp Unit:=wdParagraph, Count:=1, Extend:=wdExtend
(.PasteAndFormat) gets highlighted... I'm not that computer savvy... please help!!
Thanks heaps
Ross
I am receiving the Method or data member not found error message when I attempt to add a new record in form view. I have been working in an old 2002-2003 version of Access until last week when it was converted to 2007. The old version allowed for additions just fine but now after the conversion something is wrong. The code is below. I underlined the line throwing the error message (FindFirst). Code is not my strong suit.
'Open form to new record
gstrCallingForm = Me.Name
strDocName = "frmNewApplicant"
[Code].....
I'm a newbie trying to upgrade a 2003 database to 2010. When I compile this database an error pops up saying "Method or data member not found". This is the code below:
Private Sub CBPrintReq_Click()
On Error GoTo SendPrintError
Dim NewID As String, Notice As String, Temp
Dim CRLF As String * 3
CRLF = Chr$(10) + Chr$(13)
Notice = ""
[Code] ....
Error: Compile error: Method or data member not found when create Update button
View 7 Replies View RelatedI have a form (frmTimecardsDataEntry3*) that needs to requery combo boxes to narrow down the selections offered in the dropdown of each combo box.
It is a data entry form. I.e. Dataentry is set to yes.
The ClientName combo box has an after update event which requeries the matter combo box, so that the MatterName combo box dropdown only shows the matters relating to that client. This works just fine.
The MatterName combo box has an after update event which requeries the Rate combo box so that in the Rate combo box dropdown only the hourly charge rates relating to that matter are shown. That works too. So far so good.
I then tried adding another after update event to the MatterName combo box, so that another combo box, Application, was requeried too, so with the Private Sub it looked like:
Rate.Requery
Application.Requery
But this resulted in the error in the title to this post and the debugger highlighted in red the word Requery in the phrase Application.Requery.
I thought maybe Access does not allow two requeries resulting from one after update event, so instead I took Application.Requery out and placed it as an after update event in another combo box which did not have any other after update events to run.
However, this resulted in the same error.So the error appears to have something to do with trying to requery the Application combo box but I cannot see what is causing the error.
The Application combo box SQL is:
SELECT Applications.ApplicationID, [ApplicationDate] & " " & [ApplicationName] AS ApplicationDisplay, Applications.ApplicationDate, Applications.ApplicationName, Applications.MatterName
FROM Applications
WHERE (((Applications.MatterName)=[Forms]![frmTimecardsDataEntry3*]![MatterName]))
ORDER BY Applications.ApplicationDate, Applications.ApplicationName;
This is the same arrangement of SQL that I am using on the other requeried combo boxes that work. When I take the WHERE statement out of the Application SQL and run it the query returns all of the applications.
I am not sure what the error code is trying to tell me about the attempt to requery the Application combo box.
I have a yes/no box in the form and when the firm is first opened it has a small square dot in it, but as soon as any data is entered in the form the dot clears and leaves the usual empty tick box that you would expect to see.
Also, another possible symptom is that I had another version of this form previously working quite well except that when I did several data entries all at once, so I had several forms filled in with different data (before refreshing and thus entering the data in the table), when I scrolled between the forms I kept losing the MatterName data when I scrolled back, and then when I re-entered the ClientName data the correct MatterName data returned without me having to use the dropdown to select it.
I have had an earlier simpler version of this form working for some time, with ClientName requerying MatterName and MatterName requerying Rate, and I am using the same SQL structures in the new form but getting the error in the title to this post and the other isues just described.
I am getting method of data member not found for the following code when inserting values to a table. Form has three frames. Add/Insert is on OnClick Event.
MsgBox "First Value, " & Me.txt_FSNo
CurrentDb.Execute "INSERT INTO BackchargeLog (BC_FSNo, BC_FContract, BC_FPurchaseOrder, BC_FProjectArea, " & _
" BC_FTitle, BC_FDetailDescription, BC_FSupplierToBeCharged, BC_FSupToBeChargedNumber, BC_FSTBCContactName, BC_FSTBCContactNumber, " & _
" BC_FSTBCContactEmail, BC_FIncidentReportedDate, BC_FInitiatedDate, BC_FEstimateAvailable,
[Code] .....
I have two similar forms with similar controls. I copy 20 pieces of controls to another forms certain tab.
When I run code to update database table using the control box value, access can’t find the control box. I got this errors message.
Do you guys know why I got this error?
Thanks
Hi all, I’m trying to filter the records a subform shows based on the employee number (in a combo box) that the user selects in the main form. At the moment im getting the following message when I select an employee number in the combo box: “Compile error, method or data member not found”:confused:
Ive searched the forums on here and tried to make use of the information other people have posted but im still having trouble getting this to work
Below is the code I have on the combo box of the main form:
Private Sub Cbo_Emp_Filter_AfterUpdate()
Dim strSQl As String
strSQl = " Select * from DATA-EMPLOYEE_MASTER where DATA-EMPLOYEE_MASTER.EMPLOYEE_NUMBER=" & Form![SCREEN-ABSENCE_TRACKING_MAIN]![EMPLOYEE_NUMBER]
Me.SUBFORM_ABSENCE_TRACKING.RecordSource = strSQl
Me.SUBFORM_ABSENCE_TRACKING.Requery
End Sub
Ive also posted the database if any one is willing to have a look for me (ive removed irrelevant tables/forms/reports). Im using access 97
Thanks
Jim
I have a strange behaviour on a module which reference to Microsoft Outlook Object Library 14.0. The below code got an error 461 on the folderoutlook.display code,i.e. the method is not found. The funny thing is that the same code gives no problem in another accdb file, exactly same code with same reference on same machine.
Set appOutlook = GetObject(, "Outlook.Application")
Set appOutlook = New Outlook.Application
Set namespaceOutlook = appOutlook.GetNamespace("MAPI")
Dim folderOutlook As Folder
Set folderOutlook = namespaceOutlook.GetDefaultFolder(olFolderInbox)
FolderOutlook.Display
I need to add a DLookup to my Subreport.
For my text box, Text255, on the Subreport I have tried:
Code:
Private Sub Report_Load()
Me.Text255 = DLookup("[Along_line_spacing_%pass]", "Performance_Requirements_Defaults_Table")
The table Performance_Requirements_Defaults_Table has just one record for lookup. No value is returned when I run the main report.
I found this: [URL] .....
And tried adding the lookup code to the main report instead of the Subreport, but I think I am having trouble understanding what they mean here: "Subform1 is the name of the subform CONTROL on mainform" Are they inferring that I need to have a text box on the mainform as well?
I tried using this Me!Subform1.Form!ControlName like this:
Code:
Me.Text255.QC_Along_Line_Processing_Subreport!Text255 = DLookup("[Along_line_spacing_%pass]", "Performance_Requirements_Defaults_Table")
I know this is not correct, and I have tried several variations, but I am totally stumped. Everything I have tried with the lookup code in the main report returns "Member Not Found" and Text255 is highlighted. I feel like this should not be such a big problem.
one more thread of mine today
I have this table:
-> tblTest
Code:
test_id | test_Name | test_Date | test_value
------------------------------------
1 | Company A | 01.01.2010 | 0,90
2 | Company A | 02.01.2010 | 0,95
3 | Company A | 03.01.2010 | 1,10
4 | Company A | 05.01.2010 | 1,05
5 | Company B | 01.01.2010 | 0,9
6 | Company B | 02.01.2010 | 1,20
7 | Company B | 03.01.2010 | 1,15
8 | Company B | 05.01.2010 | 0,95
9 | Company B | 07.01.2010 | 0,80
The important level is 1,00
Now I will, for each company, check:
- Is the value of ID-1 >1 AND the value of the ID-2 <1, THAN give me a 1
- Is the value of ID-1 <1 AND the value of the ID-2 >1, THAN give me a -1
In this example the result should look like this:
Code:
test_id | test_Name | test_Date | test_value | test_Code_result
-------------------------------------------------------------
1 | Company A | 01.01.2010 | 0,90 |
2 | Company A | 02.01.2010 | 0,95 |
3 | Company A | 03.01.2010 | 1,10 |
4 | Company A | 05.01.2010 | 1,05 | 1
5 | Company B | 01.01.2010 | 0,90 |
6 | Company B | 02.01.2010 | 1,20 |
7 | Company B | 03.01.2010 | 1,15 | 1
8 | Company B | 05.01.2010 | 0,95 |
9 | Company B | 07.01.2010 | 0,80 | -1
Probably I have to carry out this in vba.but i dont know how I can calculate across the datapoints (rows).
i recieved error on the following connection string in the combo box change event code as follows,
Private Sub LotNo_Change()
Dim conn As New ADODB.Connection
Dim sConnString As String
[Code]....
I have a search query that searches for different results based on 3 criterior. I have set up a form so that the user can input the text into the form and then once the Submit button (that i created) is clicked the query table will be shown.
My question is:
Is it possible to have an error message box appear when i click submit and no data is returned by the search query?
I'm hoping for the message box to say "No corresponding records to your search criteria. Do you want to try again?"
Then the options given in the message box are Yes (where they should be taken back to the search form) and No (Where they are taken to another form).
I have a form where when the user clicks on the browse button then excel workbook filepath gets stored in the textbox as below:
Code:
Private Sub CommandButton1_Click()
ChooseFile
End Sub
Sub ChooseFile()
Dim fd As FileDialog
Set fd = Application.FileDialog(msoFileDialogFilePicker)
[Code] .....
Please see attached the excel workbook. Everytime the user will select Excel workbook using Browse button. Now in that file , the first sheetname will always be "Summary". I want to perform the following steps:
1. So now I want VBA code to copy the data from columns "Withdrawn","Obsolete","Updated","LitRef" from Summary sheet to the Access table named tblSummary.
2. When the data gets copied in Access table then write So VBA code that will check if the data in field LitRef in table "tblSummary" is present in field "Reference" of Access table "tblliterature" . if its present then check in the tblSummary , which corresponding fields out of "Withdrawn","Obsolete" and "Updated" stores "Y" .
3. If "Withdrawn" field value is "Y" then change the status of corresponding record of tblliteraure to "Withdrawn"
4. If "Obsolete" field value is "Y" then change the status of corresponding record of tblliteraure to "Obsolete"
5. If "Updated" field value is "Y" then change the status of corresponding record of tblliteraure to "Updated" .
ok
here it is
i have a database for members.
i have a table with the general info for the members like name, date of birth, that kind of stuff.
i want to know how i can make sure that there are no duplicate members.
when in the form.. how can i validate that the member isn't already there?
the problem is i can't validate the name for duplicates because there isn't only one John in the world. or the name might match all together but the birthdate isn't the same.. things like that
i'm sure this is a very common problem so there might be an established solution
i made a search for duplicate reord. but not sure what to do with it
i was thinking of creating a special value using firstname-lastname-birthdate so they'd be unique... but even after doing that. how can i make sure the record isn't added to the table until it is validated?
hope i was clear with my question.. thanks for the help
Hi
I am a member of a local tennis club and they have asked me to help them to build a database that will cover membership details and annual fees. Does anybody have a template that would be useful to get me started with this? Obviosly, it could be for any type of club.
Regards
Noel
I have to write a code for my database,i have folder with files "pending Review" and a table with column "tblExcelLocation". when i run my database all the files from pending review folder goes to "tblExcelLocation" on a click of button.But,if the files already exists it should not insert those files and insert the rest.For this i tried to write a code but i think i m unable to do that .
Code:
Loop through files in folder
folderspec = "O:QA FilesQC ReportingPending Review"
Set fs = CreateObject("Scripting.FileSystemObject")
Set f = fs.GetFolder(folderspec)
Set fc = f.files
[code]...
i have these code to auto generate member number but the highlighted line generate error 94 - invalid use of NULL:
Private Sub cmdGetNumb_Click()
'On click of button a new Member Number is generated and
'focus is moved to tFName field.
Me![nMembNum] = NewMembNum()
Me![tFName].SetFocus
'Prevent accidental click
Me![cmdGetNumb].Enabled = False
[Code] ....
Is there a tool that is not to expensive that can be used to compare access databases for differences.
View 2 Replies View RelatedHi everyone,
I've recently begun building a database to keep track of stock at work. Nothing particularly special or difficult. I have a little bit of prior experience with Access and VB, but not heaps.
Basically, I've created a tables for parts, companies etc, and am relating all the data together.
At the moment I've made a form that allows you to enter a new part, with Part Number, Description, Category, Supplier, etc.
The complication comes when I want to create an ASSEMBLY of parts. I'd like to create an assembly (which has a lot of similarities to a part, in that it has a part number, description etc), and that assembly needs to store a list of parts that it includes. A simple assembly might include a few items, ie, a bowl of meatballs includes the bowl, a fork, the spaghetti, and 5 meatballs. A more complex assembly (a complete dinner for 5) might include 5 bowls of meatballs (a sub assembly), pepper and salt, 5 glasses and two bottles of coke.
I'm not sure how to best store this assembly data...
I can't really have a table with a finite number of "part" spots because the assemblies get quite large. I'd rather not use an ugly VB macro that stores the PartID's with quantities either, as that could get thoroughly out of hand pretty quickly.
I'm sure there must be a simple method for doing this, but without having a clue as to what it might be called I can't really look for it in help!
Any clues you guys could give me would be great.
Thanks
Col.
I want to have my records in my form show the latest entry, not a completely new form. The user will click on the new record button to create a new record but I want the user to be able to see the last record. Anybody know how to do this?
View 14 Replies View RelatedHello. I am quite new to Access and even newer to this forum. So please be gentle...
My question is quite simple i think. I want to display one particular record.
I have a keyboard wedge barcode scanner.. so basically a quicker and easier way to input digits or letters into a field. I also have lots and lots of CD's DVD's which i want to track and list the contents of, by simply entering the cd/dvd's barcode number istead of having to insert into my pc and browse manually.. if possible searching within results would be good too.~
think of it as a supermarket style.. input number - output entire contents... there could be hundreds or even thousands of programs or music titles,images, videos or documents.. along with any associated data, (where it is stored, who borrowed it last etc)
Can anbody outline the basics for me to implement this? remember i am quite new to Access and databases in general.
Thanks in advance, and keep up the good work on/in this forum. :)
Rob
I have recently inheritied a database and find that there are functional differences between different versions of the database. The database contains over 30 very large tables and I am unable to find the differences between the versions. I need a process or tool that I can use to compare the different versions to find the table/record/field differences. I am up against a deadline and am needing a solution ASAP.
View 1 Replies View RelatedI have a python script "runAll" that takes two arguments: processID (the primary key of one table as a string) and a filename (a full file name path as a string).
Is it possible to run a python method with arguments from inside a VBA script (activated by a button press)?
My python script is called XMLGenerator.py, and the method I want to run is called runAll(processID,filename).