Modules & VBA :: Conditional Formatting With Like - Colouring Fields Within A Form
Jul 5, 2014
What I am trying to do is create conditional formatting to colour fields within a form.
The conditional formatting option built in allows me to colour based on set values i.e. Value=Design turns green. I need to somehow say if Value contains the word Design turn green. This is because in addition to the word Design there will be a variable description. I tried editing the conditional format created by the wizard to Value="*Design*" but that didn't work.
Now I'm trying to write it in VBA code but am still struggling. Here's what I tried but it doesn't like it:
If InStr([Forms]![Query2]![Activity] Like "*Design")>0 Then
[Forms]![Query2]![Activity].BackColor = vbGreen
End If
I created a form that applies conditional formats depending on a field. It works fine, until you enter data into one of the conditionally formatted fields, then all hell breaks loose. Conditional formats totally go away and the cells go to #error.
I have a field on a report that I was able to make bold using conditional formatting. I want to make the other fields in the row bold as well if the value of the 1st field equals a set value.
I put conditional formatting on the Contractor field
EX: Field Value Is equal to "Estimations"
I was Bid Amount, Sq Footage, =[bid amount]/[sq footage] and =[bid amount]/[estimate] fields to also be bold if the Contractor field is equal to Estimations.
In my Access 2010 report, I am attempting to perform conditional formatting of one field based on the difference between two fields. In particular, one field is "Time Scheduled" and the other field is "Time In". If the "Time In" is equal to or greater than 60 minutes of "Time Scheduled", I would like to format it to be red font. If it is less, I would like to format it to be green font.how I can conditionally format to do this?
I am trying to add conditional formatting to a several fields in a report. So far i can use the contional formatting to set a field called [colour] to set that field to red and bold. But i believe I need to use an Expression for all fields, so I can make all fields that = red go red. I have used the the expression:
I have a form with 2 sub forms which have identical fields from different records. I want to use conditional formatting to indicate a mismatch between 2 of the identical fields. I have been told I should use [NewField] <> [OldField] but I don't know how to complete the syntax. If I call the first sub_form_1 and the second sub_form_2 and the field name is path_length on both, how do I compile the statement?
I have a form in datasheet with the fields "Date In" and "Date out" among other.
I want to be able to Change the backcolour of the "Date In" to red, yellow, or green depending on the length of time elapsed between current date and date in. This works fine on the conditional formatting, but now I only want to apply this formatting IF the "Date Out" is empty.
I have a report which I would like to apply conditional formatting on multiple fields. I would like the conditional formatting to be based on two types of criteria
First criteria would be contracts that start with the year 2014. I used the following expression which worked - InStr(1,[ContractNr],"2014" AND [DirectorInCharge]= "Joseph Steinbok" or "Adam Godson")
To this expression I would also like to highlight fields which contracts start with 2014 AND have a particular Director assigned to it. For this I used the following expression - And [DirectorInCharge]="Name"
On their own, both expressions are working but I want to combine them. How do I do this? I've tried the following - InStr(1,[ContractNr],"2014" AND [DirectorInCharge]= "Name") but then nothing is highlighted. I also tried InStr(1,[ContractNr],"2014") AND [DirectorInCharge]= "Name" - in this instance EVERY record was highlighted.
Is it possible to do conditional formating after a page break?
I have been given someone elses mess to clean up. It is a massive procedure which runs dozens of queries, then formats the results and pastes them into a word file at given bookmarks
For most tables there is one record for each lake. However there are several where many entries per lake. The logic being applied is that the font colour for the column is made white, then for each first instance of a lake name the font colour for that cell is made black again.
The problem is there are many times were the first row of data on a new page is not the first record for a particular lake making the reader have to flip back to the previous page to double check which lake they are looking at data for.
So what I want to do is leave the existing logic, and just add turning additional cell's (Column 1, after a page break) font colour back to black.
I have a folder that .csv files which are connected to my database are updating in. Once the .csv that i specify updates I want a color box to turn green. Is there a way to do this? Maybe just use when the linked text file updates?
I was wondering if any of you experts out there know a way to help me out here. I was wondering if it is possible to color the text on the last pressed button on a continuous form different from all the others, so people will know which one they pressed last? I've been trying a lot of different things here but i'm stuck. All i can get done is that all the buttons turn a different color, but doesn't solve anything.
I have a continuous form. On which I have a frame and three option boxes with values 1, 2 and 3 what I am trying to do if one record is selected in option box other text boxes of the same record turn red I am using this code which works perfectly expect that it's doing for all records. I want that particular record to turn red.
Code: Private Sub Form_current() FormatGroup End Sub ' Private Sub Frame53_Click() FormatGroup
Need to confirm whether the Default formatting option in the Conditional formatting Dialog won't work in datasheet view of a form. Please note that all conditional criteria are working fine but not the Default Formatting option - only in the Datasheet view (In Single Form view the default formatting is working fine)
Hello, Could some kind person out there help me out please? I have been 'dabbling in' the area of conditional formatting, particularly in the area of changing the colour of my active form based on the result of what’s output on a text box. I have had some success in this area but where I am getting confused is getting the colour of my form to change on the basis of what is entered into a text box control that does not match exactly. My forms background changes to the required colour when its value is ‘set exactly’ but what I am trying to achieve is to change it according to the first letter of entry regardless of what follows? It always starts with a letter, either a ‘D’ or ‘V’ to indicate whether its ‘Vital’ or ‘Desirable’ and is subsequently followed by no more than 6 numbers and finally a letter. Basically I need my form to change colour based on the whether it is either a ‘V’ or a ‘D’ irrespective of what follows???
What I have been using so far is:
Private Sub Model_Number_AfterUpdate() If Me.Part_Number = "V111145K" Then Me.Section(acDetail).BackColor = 12632256 'Light Red Else Me.Section(acDetail).BackColor = 8421631 'Blah Gray End If End Sub
Private Sub Form_Current() If Me.Part_Number = "V111145K" Then Me.Section(acDetail).BackColor = 12632256 'Light Red Else Me.Section(acDetail).BackColor = 8421631 'Blah Gray End If End Sub
I have a continuous form on which where each record has many controls, including control (A). I wish to set the colour of this control based on the contents of another control (B). Control B is a memo format and is placed behind another control making it hidden. The idea being that the user can then click on control(A) and look at supporting information from Control B on another form.
Conditional formatting cannot be used since this only allows conditions based on the control (A), not (B). Event procedures cannot be used since they all depend on making a record the current record, and I want the user to immediately see when further information is available. When I apply VBA code using an 'on load' event it is action for all records on the form in a way that if only one record has extra information, all records are flagged in this way.
I have some Conditional Formatting of a Currency Field in an Entry Form. The cell is conditionally formatted with a yellow background when the value is zero.
I now wish to add an additional condition to the expression such that even if the value is zero it will not be formatted if a specific check box is TRUE.
I have tried modifying the expression such that it reads;
[currency field]=0 AND [check box]<>TRUE.
It correctly turns off the conditional formatting if the check box is ticked, but does not turn it on again when the check box is unticked.
I've a question and I hope you can help me out....... I'm trying to use Conditional Formatting Options on a Text box called "Date". I'd like that this box become Red if its value is between value1 from Text box "Start Date" and value2 from Text box "End Date" or Green otherwise (in this way the color change dynamically every time I change the values of Text Boxes "Start Date " and "End Date"). How can I do that? What I need to type in the Conditional Formatting Windows?
On my Database I have used Conditional Formattion to change the colour of the qty to highlight when the qty is getting low however its not as good as I would hope as there are different type of definition of quantity (D of Q) e.g. Each (single items such as a screw) and Roll (such as cord and tape)
Conditional formatting doesnt work well because if I have it as less than 10 the qty is in red, its ok for the each items however not the roll as 10 rolls of tape is more than we would need.
I am just wondering if anyone knows what the code would be to change the colour depending on the qty and the D of Q
All i have got so far is: If me.qty <10 and DofQ = EA then
Does anyone know if there is a way in a report to display an entire row in a different color? I'm running a report based on a query and I need specific information to come up in RED. I read about conditional formatting but you can only apply it to a field in a report, but not to an entire row. Let's say I have a group of managers and I need to know the ones that are making more than $50,000 a year. I don't just want the salary to come in RED, I need the entire row (like name, last name, title, date of hire, salary, etc). Any ideas?
I have 2 subforms on a main form. I would like to compare the value in field 1 og subform 1 to field 1 of subform 2. I can't seem to get the conditional foramtting between the 2 subforms to work. Any ideas?
Good afternoon everyone I am new to this forum. I have not done access development for about 6 years so I appologise for my rustiness. I have created a form based on a query. The form is of type Datasheet. I have assigned Conditional formatting to the grid fields based on an expression evaluating a check box. This works fine and when I open the form the conditional formatting works great.
However, I am now trying to add this form as a subform in A.N Other form. The parent form has no datasource and is purely there to display some text values linked to unbound controls. I did this because apparently you cannot show form header for a datasheet view. When I insert my child form into the parent there is no logical link. The behaviour of the form and subform works fine but the conditional formatting does not appear in the subform grid. Why is this and how can I best sort this? Any help would be appreciated, but please be aware I am not fluent in VB as I have been away for quite some time.
