Modules & VBA :: Copy Results Of Query Without Headings To Clipboard
May 19, 2014
I found the following code to copy the results of a query to the clipboard.
Code:
DoCmd.OpenQuery "DataLoadTemp_qry", acViewNormal, acEdit
DoCmd.SelectObject acQuery, "DataLoadTemp_qry"
DoCmd.RunCommand acCmdSelectAllRecords
RunCommand acCmdCopy
DoCmd.Close acQuery, "DataLoadTemp_qry", acSaveNo
It works great, except that it is also copying the column headings. Is there any way to copy only the results without the headings?
I'm copying this data to the clipboard because I want to be able to paste it in a program called DataLoad which will load this data into one of our company's legacy systems.
View Replies
ADVERTISEMENT
Jul 8, 2013
I'm trying to copy the outcome of a query to the clipboard. as follows
DoCmd.OpenQuery "changeboard query", acViewNormal, acEdit
DoCmd.SelectObject acQuery, "CHANGEBOARD QUERY"
RunCommand acCmdCopy
DoCmd.Close acQuery, "Changeboard query", acSaveNo
It doesn't work because in the open query there is nothing selected.
If I select the lines by hand the copy command works fine.
However I can't find the command in VBA to select all the lines in the query.
View 1 Replies
View Related
May 28, 2015
I am copying a range from excel (multiple rows) and paste it directly to access table using:
Code : DoCmd.RunCommand acCmdPasteAppend
Sometimes it does not work and I need to use paste special as text.
Is there any way to paste special as text using VBA ?
View 3 Replies
View Related
May 30, 2014
I am using some vba code (see below) to put some data into the clipboard for pasting elsewhere.But it seems to fail sometimes, I think it fails when the data is too long.Is there a maximum?
The code below fails on the stmt, "DoCmd.RunCommand acCmdCopy" No specific error msg, just the dreaded "Microsoft Access Must Close...."It seems to happen when the length of the textbox is over 1000 characters.I tried inserting some DoEvents statements, but it made no difference.
Private Sub btnCopy_Click()
Dim rst As DAO.Recordset
Set rst = CurrentDb.OpenRecordset("tblLogs", dbOpenDynaset, dbSeeChanges)
If rst.RecordCount = 0 Then
rst.Close
Set rst = Nothing
[code]....
View 3 Replies
View Related
Aug 29, 2013
Is there a way to prevent the col headers from copied to the clipboard when copying a datasheet? When I paste to excel i don't want the headers - ?
View 2 Replies
View Related
Apr 15, 2014
I am trying to copy a caption from a form to the clipboard so that I can later paste it into another application.
The code I have found via a search on this website 1) Clears the clipboard and then 2) copies the caption from a nominated field. 2) doesn't work as I sure I have the statements wrong.
Call EmptyClipboard
Me.B7_DB_GCUH.Caption
DoCmd.RunCommand acCmdCopy
View 1 Replies
View Related
Aug 7, 2013
I am looking to create a button in access that will allow a field to be copied the the clipboard based on information in a query and then separated by a ";" and then can be pasted in another program.
I have created a database to keep track of membership. In the Member Personal Info Table I have collected their email address's and then created a query "Active Member Personal Info" for Active Members to have their name and Email displayed in the query. Now I am trying to take the 140 members email address and paste it in a gmail BCC line by clicking paste rather than doing each individual record and then copying and pasting.
View 1 Replies
View Related
Mar 10, 2014
I'm after a macro or something to allow me to map a button on a form so that when it's pressed it copy's a certain field to the clipboard?
View 1 Replies
View Related
Sep 9, 2013
I have a form with two Text box fields "Username" & "Password"
I want to create a copy button next to each field that will copy the contents to the clipboard.
The password field has the code:
Code:
Private Sub Command228_Click()
Me!Password.SetFocus
DoCmd.RunCommand acCmdCopy
End Sub
The username field has the code:
Code:
Private Sub Command229_Click()
Me!Username.SetFocus
DoCmd.RunCommand acCmdCopy
End Sub
The Username copy button for some reason gives me the following error:
Run-time error '438': Object doesn't support this property or method
Why it doesn't like this field?
View 4 Replies
View Related
May 18, 2014
I would like to place an image file located at e.g. "C:MyImagesimage.png" into the clipboard. I have not been able to figure out how to do this. I have been able to place Text into the Clipboard using the DataObject late binding sub below.
Code:
Public Sub PutInClipBoard(strString As String)
Const DATAOBJECT_BINDING As String = "new:{1C3B4210-F441-11CE-B9EA-00AA006B1A69}"
With CreateObject(DATAOBJECT_BINDING)
.SetText strString
.PutInClipBoard
End With
End Sub
View 2 Replies
View Related
Jun 24, 2014
I would like to be able to join 2 text boxes and then copy them to clipboard. My initial fumbling has had me to joing the 2 text boxes as a string and then set that string as the value of another hidden text box and then copy that text box.
strOut = Me.Title & Me.Description
Me.CopyTxt.Visible = True
Me.CopyTxt.Value = strOut
Me.CopyTxt.SetFocus
DoCmd.RunCommand acCmdCopy
Me.Title.SetFocus
Me.CopyTxt.Visible = False
This does work but I would like to format the output if possible to remove the element identifiers? The string copies out as below.
Title Information<div>Description Information</div>
Is it possible to remove the <div> and any other elements that may appear either using my method or another way. Not sure if they are appearing as the Title box is plain text and the description is Rich?
View 4 Replies
View Related
Oct 6, 2014
I currently use the following to import a csv file into a staging table and then append and save the data to a table - however it doesnt use the headings from the csv file and creates an error table and a blank record where the headings should be apart from one column where it copies the name.
Would it be possible to use the headings as field names or just omit them completely and use the standard f1 f2 f3 etc access generates in the tmp table?
Code:
With Application.FileDialog(msoFileDialogFilePicker)
.Title = "Select the CSV file to import"
.AllowMultiSelect = False
.Filters.Clear
.Filters.Add "CSV Files", "*.csv", 1
.Filters.Add "All Files", "*.*", 2
[Code] ....
View 1 Replies
View Related
Jul 4, 2006
I created a csv to allow me to update sage act witht he contents. The problem is that the csv file adds the Field Headings which is causing act to fail to recognise any of the data to import.
When i created a blank csv file without these headings, the data was recognised and available for import. My question is... how do i get rid of these headings?
Thanks
Allan
View 4 Replies
View Related
Nov 1, 2006
I have about 10 columns with data in each column...the columns dont need to show every time. I want to set it up where the user pics the column heading from a drop-down menu and then that column alone will show, none of the other columns are visible...can this be done?
View 1 Replies
View Related
Dec 20, 2013
I have a excel object I have opened, and want to copy a query into a named range on the workbook.
heres the start have made
Sub openExcel()
'WillR - opens the specified Spreadsheet
Dim xlApp As Excel.Application
Dim xlWB As Excel.Workbook
Set xlApp = New Excel.Application
With xlApp
[Code]...
View 2 Replies
View Related
Jan 21, 2008
Hello to everyone!!!i need to ask somethingI CREATE I DYNAMIC QUERY .....HOW CAN I CHANGE THE NAME OF THE COLUMN HEADINGS?THANX IN ADVANCE
View 1 Replies
View Related
Feb 26, 2015
I have a created a crosstab query which gives me the results I need, but I want to sort the row headings differently. These are not numbers, but machine sizes which range from 4 Metre to 20 Metre. Currently, the crosstab gives me:
10 Metre
12 Metre
14 Metre
17 Metre
20 Metre
3 Metre
4 Metre
5 Metre etc
But I need to show it as:
3 Metre
4 Metre
5 Metre
10 Metre
12 Metre
14 Metre
17 Metre etc.
The field is short text data type and data comes from an ODBC linked table to SQL server table, and I am using Access 2013.
View 4 Replies
View Related
Apr 23, 2014
I've setup some crosstab queries with good success and set column headings that appear with blank spaces when there's no data as expected, but I have 1 report that is formatted with set row headings (its a specifically formatted report that i need to produce, that i can't just change).So I need to basically do the same but with the row headings set (I have got the crosstab working, just not showing the rows with no data as yet).
View 3 Replies
View Related
Mar 7, 2014
I have spent the day using Access 2010 and attempting to move information from a parameterized query into specific cells in an excel template. It runs smoothly until I attempt to reference the query at which point I run into th error "Too few parameters. Expected 1." Currently my reference code looks like this:
Dim T As Recordset
Set T = CurrentDb.OpenRecordset("SELECT [8D Data].ID, [8D Data].[Customer Closed], [8D Data].[Days Open], " & _
"[8D Data].[Open Date] , [8D Data].[QN #], [8D Data].[Last Report Date], " & _
"Leaders.[Leader Name] , Leaders.[Leader Title], Leaders.[Leader Phone #], " & _
"Leaders.[Leader Email], [8D Data].[Part Description], [8D Data].[Customer P/N], " & _
"[8D Data].Customer , [8D Data].[Vehicle Year], [8D Data].[Problem Description]" & _
"FROM [8D Data] INNER JOIN Leaders ON ([8D Data].Lead = Leaders.ID)" & _
"WHERE ((([8D Data].ID)=[Enter QCR #]));")
View 4 Replies
View Related
Feb 3, 2014
I have inherited an Access 2003 database and have been asked to improve the functionality of said database. Specifically, I have been asked to create some charts for improved reporting. I used the wizard to create a crosstab query to support the chart(s):
Code:
PARAMETERS [Forms]![Switchboard]![ActualDate] DateTime;
TRANSFORM Sum(qryPMCompletion.CountOfWOs) AS SumOfCountOfWOs
SELECT qryPMCompletion.PA_Priority
FROM qryPMCompletion
GROUP BY qryPMCompletion.PA_Priority
PIVOT qryPMCompletion.wo_Completed
WITH OWNERACCESS OPTION;
Now what has happened is that the wo_Completed is a Yes/No field so my column headings and therefore my legend comes up as "-1" and "0" instead of "Closed" and "Open".
Is there anyway to change the name of the column headings or shall I just create my own legend?
View 1 Replies
View Related
Jun 29, 2015
I have a link to a "csv" file. I then run a query to exclude some rows.
Then I need to export the query result as a text file with quotes (as text qualifier) and semicolon (as delimiter). This is not a problem. The problem is, that I only need the text qualifer for the data in row 2+ and not the headings.
The data export should look like this:
ID;Contract;Date
"1";"4700001360";"20150618"
How can I specify this export layout in the export wizard?
View 5 Replies
View Related
Jan 20, 2014
I have a query which returns a list of reports I have created this session.
I want a button that when I click it runs the query and then stores the results into a variable.
I looked online and found a pretty good connection code and loop code to get the data but I'm having a hard time getting it to store into a variable.
What I want to do next is using code print the reports that were listed in the query.
That Means I need to be able to take that variable and pop the information off it, storing it into another variable (or if i can use an array just use that) and use that to concatenate into a command to print that report.
I am having problems with the syntax of this though. I think I'm just missing some key elements.
View 3 Replies
View Related
Mar 22, 2015
I was beginning to think I had got the hang of creating queries on the fly in VBA. After several hours I have just learned that docmd.runSQL does not work for simple SELECT statements. I'm not going to worry about why that would be. I'm sure there's a jolly good reason.
So... I am able to dynamically create the SQL string for the SELECT statement that I need.
How do I run it? It just needs to return results as a datasheet so I can see them. I'm running Access 2013. I've been searching on this subject for quite a while and found many references to DAO, ADO, ADODAOD, YODELAEYYOUDELAYIO! and other things I don't yet understand ...
View 8 Replies
View Related
Jan 29, 2015
I have a query that randomly selects records from my table:
SELECT TOP 6 *
FROM SM_Import
ORDER BY rnd(INT(NOW*id)-NOW*id);
I would like to loop through those results, and create emails
I can get one email formed (displayed) with the code below but don't know how to get both working together to display the (6) emails:
Private Sub Command3_Click()
Dim ol As Object
Dim CaSubject As String
[Code].....
View 4 Replies
View Related
Sep 24, 2013
My company is finally using my accounts package (alongside our original package until we can be certain there are no bugs).
Anyway just adding nice to have features at the moment.
I've got a form that has 5 combo boxes where the user can select 5 customers. Then a button so they can graph the amount of money generated by each customer and compare them.
I've just made a query to return the top 5 highest grossing customers.
What I what to do now it feed the query results into the combobox values when I press a new button on my form.
How do I go about this?
View 1 Replies
View Related
May 28, 2014
I have an Access 2010 application that talks to SQL Server. Part of the application creates tables on the SQl Server and inserts data to it (I know SQL Server has its on data inport/export wizard and bulk insert capabilities but for reasons outside of my control it needs to be done from Access). So I have a connection to the SQl Server and i have VBA that happily executs SQL statements on the SQl Server. The problem is I want to return a recordset from the result of a SQL query issued to the SQL Server. The idea being to check for the presence of tables already created, and if so, append to the already existing table, otherwise if it does not exist, create it and insert data to it.Ive tried the following code but it seems no recordset is being returned:
Set objConnection = New ADODB.Connection
objConnection.Open "DRIVER={SQL Server};SERVER=10.200.3.14;trusted_connection=yes; DATABASE=" & Me.Combo54
strSQL = "SELECT TABLE_NAME FROM INFORMATION_SCHEMA.TABLES WHERE TABLE_TYPE = 'BASE TABLE' AND TABLE_NAME = '" & Me.Combo54 & "'"
strSQL = "USE " & Me.Combo54 & " " & strSQL
Set Rst = cmd.Execute("USE " & Me.Combo54 & " " & strSQL)
View 1 Replies
View Related
