Modules & VBA :: Create Table Yes / No Field

Aug 26, 2014

I have the following vba script and I can not get the yes/no field to work, also with adding field properties of required = yes and the text field to be 50, just examples are fine and I will update what I want.

Code:

Sub test()
Set Db = Application.CurrentDb
Set tdf = Db.TableDefs("1Testing") ' 1Testing is your table name
' First create a field with data type = Text
Set fld1 = tdf.CreateField("FieldT1", dbText) ' Field1 is your Field Name and formatted as text

[Code] ....

View Replies


ADVERTISEMENT

Tables :: Pull Field From Main Table And Create A New Table With Date Stamp

Nov 4, 2014

I have a make-table query that pulls all the fields from 1 table (MainTable), and creates a new table with a date stamp based apon a form value entered (New Table = MainTableWithDate).

Currently, I setup the query to pull info from the form field like this:

DateField: [Forms]![frmmain]![DateField]

However, when the make-table query is done - all date fields are blank (all other fields are correctly created), and when I look at the new created table (mainTableWIthDate), the typeassigned to the date field is "Binary" (in the form, I've specified LongDate).

View 6 Replies View Related

Modules & VBA :: Using Date Field To Create Folder Name

Feb 27, 2015

Is there a way to use a field with date in it to create a folder?

the field has a data like this 15/05/2014 in it and the / will not work in folder creation. So I was wondering how to get around it.

Code:
MkDir "c:TestAccess" & Me.Date_In & "/"

View 3 Replies View Related

Modules & VBA :: Create New Record In Another Table

Jun 24, 2015

I'm trying to create a new record in another table and copy the value of two fields in the current table's record to the newly created record.

View 6 Replies View Related

Modules & VBA :: Create Sequence From Table?

Jan 24, 2015

I am writing a deposit recording database for archaeological layers. My units are recorded in one table, and then the relationships are recorded in a separate table. I have limited the recording of relationships to be either "same_as" or "below".

So in tblContexts is have say: 1,2,3,4,5,6
in tblcontextrels I have say : 2 is below 1; 3 is below 1; 4 is below 3; 1 is below 5; 6 is the same as 5

I want to view the deposits on screen in their stratigraphic sequence. So I think I need to write a piece of code to run through "tblContextrels" which will then create a hierarchy attribute. This attribute can then be used to sequence the context deposits I am looking at.

View 2 Replies View Related

Modules & VBA :: Create X Number Of Duplicate Records According To A Field On Subform

Jun 13, 2013

I have a code that works great from the parent form but I decided to change the format and call it from a lostfocus event in the subform instead. Now I keep getting error 3314:"You must enter a value in the tbGuests.LastName field".

The code should copy the parent form fields and create x number of duplicate records according to a field on sub-form. It then runs an append query to add the information from the subform.

Code:

Private Sub GuestsInParty_LostFocus()
Dim partymsg As Integer
Dim dbs As dao.Database, rst As dao.Recordset
Dim F As Form
Dim intHowMany As Integer
Dim intCounter As Integer

[code]....

View 1 Replies View Related

Modules & VBA :: Create Sequence From Table Of Relationships

Jan 14, 2015

I am writing a deposit recording database for archaeological layers. My units are recorded in one table, and then the relationships are recorded in a separate table. I have limited the recording of relationships to be either "same_as" or "below".

So in tblContexts is have say: 1,2,3,4,5,6

In tblcontextrels I have say : 2 is below 1; 3 is below 1; 4 is below 3; 1 is below 5; 6 is the same as 5

I want to view the deposits on screen in their stratigraphic sequence. So I think I need to write a piece of code to run through "tblContextrels" which will then create a hierarchy attribute. This attribute can then be used to sequence the context deposits I am looking at.

View 12 Replies View Related

Modules & VBA :: Create Backup For Table In Another Database?

Jan 7, 2014

How to create backup for my table in another DB with VBA ....

View 3 Replies View Related

How To Create A Table With An Autonumber Field

Dec 4, 2004

Hi,
I'm new to this forum and have a question:
I want to create a table with an Autonumber field using a SQL statement,
in Microsoft Access Database, something like this:
Cnn.execute "CREATE TABLE newtable (id Long, Name Char(100)) "
is there something to put in place of "long" to make the field autonumber?
I tried the word "autonumber", but did not work.


Many Thanx.
Hadi.

View 3 Replies View Related

Modules & VBA :: Loop Through Table And Create File Names

Oct 22, 2014

I have a VBA routine that runs some queries and then creates a report as a PDF document using my virtual PDF printer. At this point it brings up the Save As dialog and I give the file a name and select a folder to store it in.

But I run this report 30 times for 30 different parameters. The parameters are obtained from a table which contains values such as Cancer, Diabetes, Stroke

-I always name the PDF file according to this value.
-I always choose the same folder.
-I always overwrite the reports I produced last month (copies have been sent elsewhere by then).

how can I get VBA to cycle through this code 30 times, each time selecting the next value from my table and creating/overwriting those files without the need for me to tell it the filename and path?

Code:
Private Sub lstSpecialties_DblClick(Cancel As Integer)

At the moment I am running this code by double-clicking an entry in the Specialty listbox, 'but I would prefer the whole thing to run multiple times for as many Specialties as exist in the table '(currently 30 but could be more in time)

'Warnings off
DoCmd.SetWarnings False
'Make the tables needed for the cumulative queries
DoCmd.OpenQuery "Spec 002 Monthly recruits - part 2 - make table" Each of these queries
DoCmd.OpenQuery "Spec 005 Monthly recruits - part 2 - make table" uses the Specialty selected above
DoCmd.OpenQuery "Spec 022 ABF previous year - part 2 - make table" as a parameter to get
DoCmd.OpenQuery "Spec 025 ABF current year - part 2 - make table" the right data for the report

[code]....

View 5 Replies View Related

Make Table: Create AutoNumber Field

Feb 19, 2007

Hi All,

I am trying to create a make-table query, with a new AutoNumber field.

I know that if you are creating a new Text field you type FieldName: "" in Field and for a Number field you would type FieldName: [], but what do you type for an AutoNumber field?

View 2 Replies View Related

Queries :: How To Create A Quarter Field In A Table

Jul 12, 2013

I have a Date field in the format X/XX/2012 for all my records.

I want to create a field that labels each record according to its quarter. So if a date is 3/29/2012, I'd want the corresponding field entry to be: Q1 2012. If it's 3/29/2013, I'd want it to be: Q1 2013, etc.

I guess I would run an update query, but I don't know how to build the proper expression in order to update my table with a new field.

I have figured out how to create a quarter #, but I actually need output in the format mentioned above.

View 10 Replies View Related

Forms :: How To Create A Field In Table Automatically

Jun 29, 2015

I have a form and it has a field as question. I also have a field as I'd in this form from the same table that is autonumber. I want that for each field the question will be created automatically in the table as below:

Is epm ( my Id field) is created
Is epm and is created are string

They should also include Id number of each row. So It would be like:

Is epm -1 implemented
Is epm-2 implemented
.
.
For each row

View 7 Replies View Related

How To Create A Field To Calculate Value Which Obtain Value From Different Table

Jan 1, 2013

I'm trying to summarize the value from multiple fields in a table and the total value will be updated on a different table as per highlighted below (taken from Northwind Web Database).

View 3 Replies View Related

Modules & VBA :: Create Unique Reference Number Based On Field Values For Record

Jun 18, 2015

I want Access to automatically generate a reference number for a record based on the values in on two other fields for a given record using a form.

The first field is called Operation Number.

The second is Bag Number.

The reference number needs to be in this format: 19C.3.1

Where 19C is the Operation Number, 3 is the bag number, and 1 is automatically generated. Additionally I need the last number --the automatically generated one--to go back to 1 if with each new bag number.

This is kind of like library catalog numbers. Not sure how to do this.

View 2 Replies View Related

How To Create A Field Showing Numerical Position Within A Table

Aug 30, 2005

Hi,

I am looking for Idea's of how to create a report.

Basically the report is a league table showing Month and YTD, this is the easy bit.

The part I need suggestions and guidance on:

The report also needs to show peoples movements in the league table i.e: whether they have moved up, down or not moved at all from the previous months position.

I was thinking of creating 2 tables: Current Month + Previous Month, in each table the persons position is indicated (an ascending record number is created throughout the table - not sure how to do this yet)

Then using code, lookup each persons position in previous month and write that position number against the persons UID and current position in current months table.

Am I on the right tracks or does someone have an easier solution?

Thanks in advance.

Darrell....

View 7 Replies View Related

Adding Fields In A Table To Create New Field In A Query

Mar 14, 2008

I've got a fields called rev code that contain the following values:

field name: 110 131 250 255 258

field value: 7.49 6 11.25 12.11 78


I'm writing a query that pulls from the first two digits of the rev code and need to round off to the nearest dollar so in my query I'll have a column 11 with a value of 7, a column 13 with a value of 6, then I need to take columns 250 255 and 255 add the values together and round off so I get a column 25 with a value of 101.

How do I do that?

View 14 Replies View Related

Tables :: Create A New Field In One Table Whenever A Record Is Added In Another

Feb 6, 2013

I am wondering if it is possible to automatically create a new field in one table whenever a new record is entered in another table. The name of the field would be the primary key entry of that new record.

I have one table (table 1) in which each record corresponds to a particular mouse with a unique ID number, and each field is the ID number of a particular genetic marker. The table overall shows what genotype (+ or -) a mouse has at each marker.

In the other table (table 2) the primary key of each record is the ID number of a genetic marker, and the fields are several different bits of information about the marker (e.g. what chromosome it's on, its location on the chomosome, etc.)

I would like to have it set up so that if I enter a new genetic marker in table 2 a field named after its marker ID will automatically appear in table 1. Is there a way to do this?

View 7 Replies View Related

Queries :: Create Separate Columns From Same Field And Table

Apr 9, 2013

I have 1 table that I duplicated to make 3 tables total. I did this b/c I am trying to create separate columns from the same field and table. The field is Workorder. Each workorder list the workorder number followed by a dash and then code. I am wanting to put all of the workorders with the same code in it's own column.

I have 5 codes that i am searching for. The first column list the workorder and a code (123456789-AD). The second column (123456789-BC). I'm good to this point but my problem occurs next.

The third column i am trying to put 3 types of workorder and it's code in the same column. As follows, (123456789-CD, 123456789-TC, and 123456789-PTC. However, when I do this it takes the results from the 3rd column and applies it to the 3rd column but also the 1st and 2nd column. I tried a UNION query and unless I am doing it incorrectly it does not work.

View 3 Replies View Related

General :: Create A Table With Single Text Field

Jul 8, 2014

Encountered this bug in Access 2010:

1) Create a table with a single text field
2) Enter some text values, including one which begins either "aa", "AA" or "Aa" (but not "aA"!)
3) Sort the field, and note where it puts the string(s) created in (2)

For me, they appear at the wrong end of the sorted list! I have tested this in Access 2007 and 2010 and it only happens in 2010. I'm using 32 bit Access on 64 bit Win 7 Pro.

View 4 Replies View Related

Create Relationship Between Multiple Field Primary Key And Another Table?

Aug 4, 2015

In table 1 fields Factor, Aggregations, Stat, and Days Back are fields that make up a multi-field primary key [URL].

I want to create a relationship between that multi-field primary key and another table, call it table 2, and make it a one-to-one relationship.

How do I do this in MS Access 2013?

View 3 Replies View Related

Creating A Table Of Contents / Index / Need Macro To Create A Field

Apr 4, 2014

I have a situation where I have a report which I will generate to print our companies pricebook. I need an index/table of contents for customers to go to the page where a product is to look up prices. The problem is that we add and subtract products on a consistent basis.

So a new product will get added, but of course, to run alphabetically, there's no way to insert it, then renumber the pages for it to be easily found.to use a maketable query, which sorts all of the products alphabetically. Each time it is run, it will delete the previous table. I then need to have an autonumber field created to create my "page numbers". Yes, each time the pricebook is run, products can and will oftentimes get new page numbers.

So my thought is to have a macro run which creates the autonumber field to the table. This will then be the basis for the form, which will in turn utilize the "page number"/autonumber field to both serve as page numbers in the report. And of course, the table which is created each time will be the "table of contents".

View 5 Replies View Related

Modules & VBA :: Dynamically Create Headers In Excel Sheet Using Access Table Data

Apr 2, 2014

I have an access table and I want the code that will check two columns in the table "EnvelopeType" and "EnvelopeSize" and create headers in Excelsheet automatically. In the attached workbook, like in sheet1 the headers are already appeared, I want this to be done dynamically using vba code so that if new values get inserted in EnvelopeType and EnvelopeSize then we won't have to change the code to display more headers.

Please see attached workbook named Sample and Access table. E.g.

EnvelopeType EnvelopeSize
TNT 2nd Class C5
PP1 2nd Class C5
PPI 1st Class A4
Recorded A4
TNT 2nd Class C5
PP1 2nd Class C5
Recorded A4
PPI 1st Class A4
Recorded C5

With the code it should display following headers in excel sheet:

TNT 2nd Class C5
PP1 2nd Class C5
PPI 1st Class A4
Recorded A4
Recorded C5

View 14 Replies View Related

Modules & VBA :: Code To Check Contents Of A Field In A Table Where Another Field

Sep 11, 2013

I am trying create some code that checks if the contents of the status field in a table is "Authorised" where the ID = something specific for multiple records. If all records witht the specific ID are "Authorised" Then generate a new record in another table. Where to start, perhaps a Dlookup?

View 1 Replies View Related

Modules & VBA :: Updating A Field In A Form Based On Another Table Field

Sep 13, 2013

Using Access 2010. Fairly new to automation and macros.I have two tables (tblProductReceived and tblBins) and a form (frmProductReceived).A field in tblBins corresponds to a location the bin is at (named BinLocationID) and the tblProductReceived table tracks product that a specific bin has received.

What I need is for the tblProductReceived field PRLocationID ([tblProductReceived].[PRLocationID]) to be automatically populated with where the bin is at ([tblBins].[BinLocationID]) when selecting a specific bin in the form (frmProductReceived).

View 1 Replies View Related

Modules & VBA :: Restrict Value In Lookup Field To Only Include Values From Table B Not In Table A?

Feb 2, 2014

I have a database that has 2 tables. Table A and Table B. Table A is my primary table. On this table I have 2 fields. The first field is a LOOKUP Field that looks up information from Table B and displays my selection in the field on Table A. Then using DLOOKUP I automatically input the information in the Second Field on Table A based upon the selection from the First Field.

This is working mostly correctly. However, the problem is, when I click on the next record in the table, it automatically changes the Second Field on that record to the same value as the record before it and continues this trend each time I click on another record. This occurs without me making a selection in the first field. If I make a selection in the first field it does change the Second Field to the Correct Value, but then the next Record has the same issue.

How do I go about fixing this so it doesn't change the value with the change of the record. Only change if I change that particular field within that 1 record?is there a way to restrict the Value's in my lookup field to only include the Values from Table B that aren't already in Table A?

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved