trying to identify if 2 fields within a table have been populated i.e.
Check date field and restaurant field, if these fields have been populated do
this
errStr = errStr & tmpDate & ", "
Else
validStr = validStr & tmpDate & ", "
[Code]...
I have a table with multiple fields and each record in the table may not have data for all fields. I need to write a query that will pull only the fields that are populated for each record from the table.
View 1 Replies View RelatedMS Access 2013: I have two database tables as below:
tbl1_MainDB --- It has a field named as "City" where I get huge data for some city names. Sometimes This field may have some unknown/new names which are not listed in our 2nd table ("tbl2_RefrDB")
tbl2_RefrDB --- It's a reference table which has raw names for cities, and then standard names of their city and state in another fields.
Target --- I want to create a VBA prorgram (Sql query) which can look from tbl1_MainDB.[City] to tbl2_RefrDB.[Raw_City] field, and if found then pick the "Standard_State" and "Standard_City" record values from there, and update into the 1st table "tbl1_MainDB".
...if not found in "tbl2_RefrDB" table, then user can be informed & ask for updating the new/unmatched city record as a new record in this table.
Attached sample database for more details.
I am looking to transfer a number of spreadsheets that I use to track IP Addresses to an Access Database, I have set up the tables and fields, what I would like to do is search for unused IP Addresses from populated table/fields.
View 2 Replies View RelatedI have an order form that auto-populates details from the customer table into adderss and contact controls. But I don't want it to auto-populate when the underlying order table already has data in the related fields. Here is the code I use on Load form event...
======
Private Sub Form_Load()
'Use this version if the ID is a number
Dim x As Variant
Dim strControl As String
Dim lngID As Long
'If parameters exist, use them
If Len(Me.OpenArgs) > 0 Then
[Code] ....
Hey All, I have a main form PID and and Building form I need to have the data from the building table display on the building form, upon adding a new record. Since my PID form and building form are linked to show the same records. PID Form contains- PIN NUM, ADDRESS, PARID. The Building form contains, PIN NUM, DATE, PHONE, OWNER, SIZE, LOCATION... I open my main form filter my results for my reocrds to show up... PIN-20053227, ADDRESS-MAINSTREET, PARID-NEWFIE22. This data is obtained through the PARID table. Now I click on the command button to see my building forms, there are 6 records, here I have the ability to add, modify, delete, save... What i want to do is add a new record, but have some generic fields appear from my table. since my name, PIN, address hasnt changed. So I would like to click add, and have appear from the building table, OWNER, PHONE etc... How might I be able to do this?? Thanks- NOTE: Hey all I double posted this incase you didnt notice this in the FORMS, Form.
View 4 Replies View RelatedHey All, I have a main form PID and and Building form I need to have the data from the building table display on the building form, upon adding a new record. Since my PID form and building form are linked to show the same records. PID Form contains- PIN NUM, ADDRESS, PARID. The Building form contains, PIN NUM, DATE, PHONE, OWNER, SIZE, LOCATION... I open my main form filter my results for my reocrds to show up... PIN-20053227, ADDRESS-MAINSTREET, PARID-NEWFIE22. This data is obtained through the PARID table. Now I click on the command button to see my building forms, there are 6 records, here I have the ability to add, modify, delete, save... What i want to do is add a new record, but have some generic fields appear from my table. since my name, PIN, address hasnt changed. So I would like to click add, and have appear from the building table, OWNER, PHONE etc... How might I be able to do this?? Thanks
View 3 Replies View RelatedIf I have a Report, with three fields (all data-type Text) named 'Jan', 'Feb' and 'Mar', and I want to have a fourth field (Unbound) alongside them, providing a count of the number of fields out of these three fields that are populated.
View 2 Replies View RelatedI have a very simple single-table database with 23 fields. Some of the records have only two or three fields populated. I would like to be able to print a summary of only the populated fields in each record.
It would Ideally look something like:
Record 1 Name
Field 1 Title: Field 1 content - Field 2 Title: Field 2 Content - Field 5 Title: Field 5 content
Field 10 Title: Field 10 Content - Field 11 Title: Field 11 content - Field 12 Title: Field 12 Content
Field 21 Title: Field 21 content - Field 22 Title: Field 22 Content
Record 2 Name
Field 1 Title: Field 1 content - Field 2 Title: Field 2 Content - Field 5 Title: Field 5 content
Field 10 Title: Field 10 Content
Record 3 Name
Field 11 Title: Field 11 content - Field 12 Title: Field 12 Content - Field 21 Title: Field 21 content
Field 22 Title: Field 22 Content
i would like to sum up 5 fields and save (or just show it in the form view is enough really) in a seperate field, i have managed to sum the 5 fields, but it summed up all 5 fields in all records, i'd like to have my form show the sum for the record, not the table.
it would be ideal that it would refresh when one of the 5 fields data changes, i.e from 1000 to 2000. again updating in the form view is what is needed.
I tried putting the following code in the form unload procedure, but although it does generate the correct message, it doesnt stop the form from closing.
Private Sub Form_Unload(Cancel As Integer)
If [Starttime] > 0 And [Admin_time] = 0 Then
response = MsgBox("Please click on the stop button to stop the clock")
Exit Sub
End If
end sub
If the above condition holds, I want the user to click on the stop button before they close down the form. I'm guessing that the form is already commited to closing before the unload event? :o
I am really new to Access 2010 as I normally use SQL so im sure this is a very basic question. I have a form where I have linked some sql tables to a table in access so the data gets stored in SQL. The form consists of many fields the basic fields are Policy ID, Name, Office, Month, Dept etc. At the moment users have to fill this in using comboboxes and text boxes but I want to change this so when the user puts in the Policy ID all the other fields are populated ie in the office field it would have a sql query of or something that looksup the office from the policy id that is entered:
SELECT [Office] FROM DBO.DQ
WHERE [Policy_ID]='what is entered into the Policy ID field' and so on.
Also not sure if this works but as I have now linked the tables to SQL does this mean that when a user fills in the information into the form it will then update the SQL table or is this another issue?
I am looking to completely disable a record when a specific Yes/No tick box is checked.
By that I mean all form fields are locked and disabled when the Yes/No tick box is checked (Yes)
I have a global function which I have hooked onto the onClick event of controls. Currently I am using commandButtons as my control of choice. In my function I can then reference Forms.ActiveControl which is no problem.
However, for lots of reasons I really need to use Image controls. Now, my problem. Image Controls have an Onclick Event, but they do not get focus so the Forms.ActiveControl will not work.
How can I identify the image control that has generated the click event if the control itself does not get focus and so cannot be referenced by ActiveControl? Working on a possibly work around, but could do with the best brains in Access on the case!
I'm wondering if there's any way to find out who has a database open.
I've saved the file as an ACCDE for the users and kept the ACCDB file as my working file. Whenever I make changes to the db I need to save a new ACCDE file on top of the existing one. In order to do that, I need to ensure no one has the db open. Half the time I need to track down 1 of 15 people to find out who it is that has it open so I can kick them out and save.
I don't have any login features, but could use the POD # that each cubicle has associated to their computer if Access allows that...
SQL related with Spec combo box:
Code:
SELECT S.Key, S.Spec FROM tblSpecs AS S ORDER BY S.Spec;
NotInList code:
Code:
Private Sub cboSpecs_NotInList(NewData As String, _
Response As Integer) ' MODIFY SPEC ENTRY.
10 Dim db As Database
[Code]....
1) For some reason, txtMessage is not displayed on the form when NotInList is processed. I see it get populated properly in debug mode, but it never gets on the form. But txtMessage gets displayed normally in Add and Delete events.
It seems to do with the way NotInList works because txtMessage is displayed if I use acDataErrContinue. But that's not what I want; it leaves the combobox list open and can't save record if I close the form.
2) DLookup is used to extract the old Spec value to display in the message. I can see the old Spec in debug mode in cboSpec.column, but Listindex is -1 and unusable.
I don't know how to point to the proper record in the list. The only other way I can think of is to loop through the list comparing the Key, and then extract the Spec.
I don't know if it's more efficient to use lookup or loop.
Access 2007-10
Listbox created: List62 (I know I need to rename it, but for now)
Multi-select: Extended
Row Source Type: Field List
Row Source: qryFieldList
Open Query: qrySelectedFields (I added primary key to first column, just to have at least one destination field).
Goal: to select multiple fields within listbox, click on command button to open query "qrySelectedFields" with selected fields from list box.This is the code I have on the command_click:
Dim varItem As Variant
Dim strSQL As String
If Me.List62.ItemsSelected.Count = 0 Then
MsgBox "Please select one or more fields.", vbExclamation, "Healthcare REIT"
Me.List62.SetFocus
End If
[code]....
It does absolutely nothing - doesn't add the fields to "qrySelectedFields", doesn't open the query, notta.
Show me the selected item in a Listbox without looping in the whole list, because my Listbox is multiselect and I want only the item that selected recently.
View 8 Replies View RelatedI have a combo box that pulls account name data from tblAcctInfo. the combo box has an OnChange event which updates a textbox, txtAcctAddr.
when i have a new account that i would like to be listed in the combo box, i use a form, frmAcctAdd, to add a record to tblAcctInfo.
what i would like to do, is:
1) when i type a new value in the combo box that isn't in the list, have that string value pre-populate in the frmAcctAdd.
2) when i have added the new account info into frmAcctAdd and then saved the record, i would like the new value to pre-populate in the combo box, with the txtAcctAddr textbox also updated via the OnChange event (or maybe a different event is more appropriate?).
I have created a long version of this which requires a lot more user interaction (1-user typing in a new value into the combo box, 2-user RE-typing the SAME value into a data entry form, frmAcctAdd, 3-user saving the new record, 4-user re-clicking the combo box and selecting the newly added value) but i am trying to streamline the data entry with auto-populated fields.
Here is the problem
I have a tblOrders that has 1800 records with 31 fields primary key tblOrder which is a number.
Periodically users export data from SAP into a spreadsheet, which are changes to the original data but may not contain the exact same fields as the master tblOrders. The data in this spread sheet identifies changes and may contain aprox half of the fields that are contained in the master tblOrders. The field names however (in the spreadsheet) will be of the same type as in tblOrders.
What I would like to do is identify differences between the tblOrders records and the records in the spreadsheet, and then update the tblOrders to show the changes.
how would you proceed? Maybe create a new table by importing the excel spreadsheet into access and then somehow querying the differences and updating the master. If anyone has done anything like this b4 please could you update me...
Cheers in advance.
I have a table called tbl_workorders. One of the fields on this table is optional but because the lookup table is on the one side of a 1-to-many relationship using an auto-number key it is requiring that this field be populated to create a record on the workorder table. This is a problem because the field is optional.
tbl_workorders
WorkOrrderID(PK)
Field1
Field2
Field3
Field4
JobSubtypeID (FK-many) <---- Lookup field
tbl_Subtypes
JobSubtypeID (PK-one)
SubtypeDesc
Should I set the SubtypeDesc field to a default value of "none"? I know this is storing unnecessary data, but is there another option?
Afternoon all,
This is one I haven't come across before.
I have a table with a list of contact details/company details etc. I would like to send an email to each customer in this list in one fell swoop essentially asking the same question but tailored for that customer (or as easily as possible).
Any help would be really appreciated.
Thanks.
I have a form that is calling data from a table. Then the user can determine if they approve the question or not. So what I am trying to do is take one combo box that has yes or no and write it to the database. I thought I had it correct, but appears I do not as it is not writing yes or no to the table. The field initially has no value and that is my query for calling the data for the user to select from. Here is the code that I have so far
<code>
'add approval to yes
CurrentDb.Execute "INSERT INTO travelerQA(approval)" & _
" VALUES('" & Me.cmbapproveda & "')"
</code>
there are many threads about Table Linking but i coud not find one that answers my specific questions.
1. Can i either prevent database from linking to my tables? (or give permissins )
2. If not, can i make the table read only when linking?
3. Is there a way to confirm what databases are linked to my tables?
I have the following code:
techid = Forms!Main!txtCurrentUserID
Task = 2
note = "Work Instructions"
strSQL = "SELECT *"
strSQL = strSQL & "FROM [tblTracking] "
strSQL = strSQL & "WHERE ([EmpID]=" & techid & ");"
Set rs = CurrentDb.OpenRecordset(strSQL)
[code]....
For whatever reason, this code will move to the last record that was entered in YESTERDAY, but I want it to move to the last record that was entered in TODAY. If I change the code to only records that are dated today, it claims there are no records (EOF), when there clearly are. why the code will not move to the last record of the table, it is only moving to the last record that was entered yesterday.
I have a table (tblPrinterSelection) with three fields: Autonumber, DocType, PrinterSel
There are three types of values for "DocType"; "Document", "LargeLabel", "SmallLabel"
I want to assign a "PrinterSel" to each type of "Doctype", which basically means that the user selects the type of document and then the printer in a form that has the code below and then I need the code to automatically update the table.
Code:
Dim PrintSel As String
Dim DocType As String
'Assign a value to the printer selected variable
PrintSel = Me.lblPrinterSelected.Caption
If IsNull(Me.frmDocType) Then
MsgBox "No document type selected."
[code]....
What i am looking for is code that would pick the value for "DocType" and "PrintSel" assigned here and add them to the table so that I can use that info later.
I am only looking to have three rows in that table so if the "DocType" does not exist then a new row is created but if it does, only the value of "PrintSel" is updated.
I should end up with something like this:
1 Document Epson
2 LargeLabel HP
3 SmallLabel Canon
How can I do this?