I am trying to get my VBA module to find the ID of a Member Number from a table using a dlookup but I keep getting a data type mismatch error,
Code:
Dim Answer As String
Dim varX As Variant
Dim rst As Recordset
Dim strSQL As Integer
Dim stWhereStr As String
Set db = CurrentDb()
[Code] .....
In the table the ID field is an automatic number and the Member Number is a short text field.
Can someone please help with the following:
Dim strX As Variant
strX = DLookup("State", "TblScheduleK12004", "[PartnerID] = '" & Forms!FrmPrintRpt!cboClient & "'" And "[SetNum] = " & Forms!frmPrintRpt!txtSet)
[PartnerID] is a text field
[SetNum] = is a number field
I can get it to work with the Partner ID OR the SetNum but keep getting the error when I add the "AND" to include both.
I have vba code that creates the following SQL:
SELECT SubscheduleID, EventID, WeekOrder, DayID, StartTime, EndTime, Priority, CanJoin, PatientTitle, PatientNickname, IncludesPatient, IncludesAftercare, Letter1
FROM [qryScheduleCombinedDetails]
WHERE (SubscheduleID = 1 AND IncludesPatient = -1 AND DuringAftercare <> "AC only" AND (WeekOrder = "All" OR WeekOrder = 3 OR (WeekOrder = 1 AND Letter1 = "XYZ")) AND DayID = 2 AND StartTime <= #8:00:00 AM# AND EndTime >= #8:30:00 AM#);
When I try to run it, I get a "data type mismatch" error. When I put the same code into a query, I get the same error. However, it will run if I delete either condition from within the (WeekOrder = 1 AND Letter1 = "XYZ") pairing. I can't figure why it can run with either of those, but not both together.
WeekOrder is defined as String. Letter1 is calculated as Cstr(Nz(IIf(Letter,"XYZ","ABC"))) within [qryScheduleCombinedDetails], because I wanted to make sure that it would be recognized as a string.
I have built in code a long sql statement as follows:
SELECT Age, BirdType, Flock, House, [Lab#], Organ, Origin, SampleDate, SampleType, Site, Source, SourceGroup,
[VT#], ProfileID, APIName1, APIAmts1, APILevels1, FullVals1, Match1, APIName2, APIAmts2, APILevels2,
FullVals2, Match2, APIName3, APIAmts3, APILevels3, FullVals3, Match3, APIName4, APIAmts4, APILevels4,
FullVals4, Match4, APIName5, APIAmts5, APILevels5, FullVals5, Match5, APIName6, APIAmts6, APILevels6,
FullVals6, Match6, APIName7, APIAmts7, APILevels7, FullVals7, Match7, APIName8, APIAmts8, APILevels8,
[Code] ......
When I try to open a recordset based on this sql, it gives me the runtime error - which is odd since I don't have any criteria in the statement.
I think the problem may be that vba is somehow adding a line break between "fullvals" and "18", but I don't know why it would do so and it doesn't always (only if the string is long).
I am getting Run-time error '3464': Data type mismatch in criteria expression when i execute the code:
Option Compare Database
Dim rst As DAO.Recordset
Dim rst1 As DAO.Recordset
Public verificacoes As Boolean
[code]....
I am getting a "type mismatch 13" error on this line
Code:
PrinterSel = Nz(DLookup("Device", "tblPrinterSelection", "Doc='" & DocumentType & "'" And "Computer='" & sHostName & "'"), "No Printer")
All vba variables are defined as strings. All fields in the table are text.
mafhobb
Hi
I am getting the following error when I try to present some information from a database:
Microsoft JET Database Engine error '80040e07'
Data type mismatch in criteria expression.
/tribute2.asp, line 168
The code relating to this is:
The error line it is talking about is:
Code:rsGuestbook.Open SQLstr, adocon
Code: <%Dim adoCon 'Holds the Database Connection ObjectDim rsGuestbook'Holds the recordset for the records in the databaseDim SQLstr'Holds the SQL query for the databaseSet adoCon = Server.CreateObject("ADODB.Connection")adoCon.Open = "PROVIDER=Microsoft.Jet.OLEDB.4.0;DATA SOURCE=c:inetpubftprootlocalusericlay
emember ing.co.nzdb
emembering.mdb;"strcustomerID = Request.QueryString("remID")Set rsGuestbook = Server.CreateObject("ADODB.Recordset") sqlstr = "select * from guestbook where guestbook.mid =" & strcustomeridrsGuestbook.Open SQLstr, adoconDo While not rsGuestbook.EOF'Write the HTML to display the current record in the recordsetResponse.Write ("<font face='Arial' size='2' color='#000080'><i>A tribute provided by ")Response.Write (rsGuestbook("confirstname"))Response.Write (" ")Response.Write (rsGuestbook("conlastname"))Response.Write ("</i></font><font face='Arial' size='1' color='#000080'><i> ")Response.Write (rsGuestbook("conrelationship"))Response.Write ("</i></font><br><br>")Response.Write (rsGuestbook("conmessage"))Response.Write ("<br>")'Move to the next record in the recordsetrsGuestbook.MoveNextLoop'Reset server objectsrsGuestbook.CloseSet rsGuestbook = NothingSet adoCon = Nothing%>
Can anyone see where I have gone wrong ... could it be something to do with the fact that 'remid' relates to another table in the database. Though when I did a reponse write on the sqlstr it is presenting the remid.
Hope this doesn't sound to confusing.
common error in VBA imports. It has happened with spreadsheets and text files I have users importing. An error message pops up "Type Mismatch." But the import appears to work correctly. So I added code that On Error, if error Like "*Type mismatch*" continue to next step. Now the user gets a longer error message: "The expression On Click entered as the event property setting produced the following error: Type mismatch." Again, the import still works, but this message is annoying! The even stranger thing is that I do not get this error message on my machine. Just the other users.
View 4 Replies View RelatedI'm trying to set email address for "Cc" using "Like" but showing error 13 Type mismatch. Problem only red mark code either all are working fine.
Code:
Private Sub cmdSendMail_Click()
On Error GoTo ErrorHandler
Dim strTo As String
Dim strSubject As String
Dim strMessageText As String
[code]....
I ahve declared custCount as an integer and id as a string that comes from the user form (id = me.CustID) and trying to count the number of matching records in the recordset (rst) using the following:
custCount = DCount("[customerId]", rst, "[customerId] like '" & id & "'")
I'm getting a type mismatch error on the DCount statement?
hi
I'm writing a pretty simple application to search an Access db. The query is:
Me.cmdSelectEvents.CommandText = "SELECT eventDetails.id, eventDetails.subject, " & _
"eventDetails.title, eventDetails.trainers, eventDetails.type, eventDetails.summary, " & _
"eventDetails.url, eventDates.date " & _
"FROM eventDates INNER JOIN eventDetails ON eventDates.id = eventDetails.id " & _
"WHERE (((eventDetails.subject)=@subject) AND ((eventDetails.type)=@type) AND ((eventDates.date)<@date));"
The parameters @subject and @type are simply strings selected from dropdown values.
The @date parameter is set by using a dropdown to select a timeframe to search in, specifically "Within 1 month", "Within 3 months", "Within 6 months". These options have the values "1", "3" and "6".
When the form is submitted the value of the selected option is passed into the following routine:
Dim valSelectedDate AsInteger
Dim dateParameter AsDate
valSelectedDate = ddlDate.SelectedValue
dateParameter = DateAdd("m", valSelectedDate, (Date.Now))
cmdSelectEvents.Parameters("@date").Value = dateParameter
When I run the debugger the right date value seems to be being passed to the sql query (i.e. if the user selects "within 6 months" and today's date is 5th May 2005, then #05/11/2005# is passed as the parameter) but I get the error data type mismatch. The column eventDates.date is a Date/Time column.
Can anyone help?
I am getting this error in a query. The field generating the error is a calculated field using a custom function.The function is:
Code:
Public Function DecimalTime(dblEvalTime As Double) As Double
DecimalTime = Hour(dblEvalTime)
DecimalTime = DecimalTime + (Minute(dblEvalTime) / 60)
DecimalTime = DecimalTime + ((Second(dblEvalTime) / 60) / 60)
DecimalTime = Round(DecimalTime, 2)
End Function
The dbalEvalTime parameter is passed in to the function as (DateIn+TimeIn)-(DateOut+TimeOut).
So the data type passed in is Double and the Function result is Double. The criteria i am applying in the query is simply <0.01. I have formatted the query field as #.00, 0.00 and General Number but it makes no difference.
I have also tried creating a second query using the first as its data source and applying the criteria in that query but still get the same error. Without the criteria the query runs fine.
I am creating a simple query in a farm audit database.
In criteria of the customers field, i have entered "Farmer One" as this is the customers data which I want to retrieve and in the Totals section I have changed the setting to Where instead of group by, but I am still getting "Data type mismatch in criteria expression" popping up.why this is?
I am trying to pass a recordset to a sub procedure as follows
Code:
Private Sub AddNewSProdStatus(rsTemp As DAO.Recordset)
rsSProdStatus.AddNew
rsSProdStatus![ProdID] = Me.Recordset![ProdStatusID]
rsSProdStatus![TitleID] = Me.Recordset![Title]
rsSProdStatus![ProdDealType] = 1
[Code] ....
However, whenever I call the procedure as below
Code:
AddNewSProdStatus (rsCSales)
I get a type mismatch error.
All Recordsets are declared as DAO and contain data...
Anyway I've got a type mismatch that I can't figure out.
Code:
dMaxLstReq = DMax("reqNumb", "FlightLog", "Month([txtDate])='" & frmMonth & "'" And "Year([txtDate])='" & frmYear & "'")
In plain english: Select the highest value in the field named reqNumb from FlightLog where the Month of txtDate is equal to the variable frmMonth and the year of txtDate is equal to the variable frmYear.
txtDate is a Date/Time field in the table FlightLog
frmMonth and frmYear are both integer variables that take the system time (sysTime) and determine the month and year: I.E.
Code:
frmMonth = Month(sysTime) & frmYear = Year(sysTime)
Am I correct in thinking that the fact that my variables are integers and not times, that this is the cause of the mismatch?
I'm having an issue with the database being read only and a type mismatch due to OpenRecordset. I know this database use to work when it when it was just
CurrentSerNum = RecSet(0) +1 was doing the incrementing.
I need the database to increment in a different way now.
Q=manufacture location
1st number is new=0 or used=1
2nd and third number =82
4th is single digit year aka 2015 = 5
6 and 7th are work week aka 25 for this week
8,9,10 are incremental numbers for the units made that workweek, so 001,002,003.
Then week 26 starts the increment starts back at 001.
Code:
Private Sub MakeThoseProducts_Click()
On Error GoTo Err_MakeThoseProducts_Click
Dim NumericSerial As Double
Dim WorkWeek As String
Dim WorkYear As String
Dim WorkWeekNumber As Integer
Dim WorkYearNumber As Integer
Dim Location As String
[Code] ....
Hi,
I have a query with a field defined in the query as follows:
Next Bill Date:
IIf(IsNull([dtmLastBillDate]),
DateSerial(Year([dtmDateRecd]),Month([dtmDateRecd])+1,15),
DateSerial(Year([dtmLastBillDate]),Month([dtmLastBillDate])+[lngNumMonths],15))
I can't seem to set any criteria for this field without getting an error:
'Data Type Mismatch in Criteria Expression'
Examples of criteria that I've tried:
=#1/1/2005#
>#1/1/2005#
=Date()
Year([Next Bill Date]) = Year(Now())
All of the above generate that same error.
{I've seen many pages/posts regarding 'data type mismatch' but none seem to relate directly to this situation.}
I could use some help, fast!
Thanks in advance,
David
"Data type mismatch in criteria expression" Error 3464
I get this on the <DoCmd.OpenForm "frmWrittenStatements"> in my code.
How on earth are any criteria attached to this?
I am trying to pass parameters to my qury thru my combo selection. I keep getting this error "Data type mismatch criteria expression", does anyone have an idea why?
WHERE (((fShiftWorked([tblTimeLog].[timeStart])=[Forms]![frmOperatorWorkDone]![cboShift] Or IsNull([Forms]![frmOperatorWorkDone]![cboShift]))=True));
I have spent so much time onthis already and i am sick of it :mad:
Attached is my db. Please help me out here.
The error I'm getting is "data type mismatch in criteria expression".
Private Sub BtnAddBooking_Click()
Dim CustomerID As String
Dim StaffID As String
Dim intPos As Integer
Dim strSQL As String
Dim strSQL2 As String
Dim BathValue As Integer
Dim rst As DAO.Recordset
Dim RemainingBookingExists As String
Dim RemainingBaths As Integer
Dim RemainingBathsExists As String
[code]....
Hi I'm doing some work on an open source intranet for a friend and I've come unstuck with data types I guess.
Microsoft VBScript runtime error '800a000d'
Type mismatch: 'str'
D:SITESEXTRANETCLIENTS../includes/connection_open.asp, line 104
I added a date field and now get this error.
The process is as follows:
add user - client-add.asp
client-add-processor.asp (& siteSQL.asp include)
the error occours on submiting the original form page
new feilds:
Code:<form method="post" action="client-add-processor.asp" name="strForm" id="strForm">..............edited...............<tr><td><b class="bolddark"><%=dictLanguage("HostingPeriod")%>:</b></td><td><input name="HostingPeriod" size="20" value="<%=Session("HostingPeriod")%>" class="formStyleShort" onkeypress="txtDate_onKeypress();" maxlength="10"><a href="javascript:doNothing()" onclick="openCalendar('<%=server.urlencode(date())%>','Date_Change','HostingPeriod',150,300)"><img border="0" src="<%=gsSiteRoot%>images/calendaricon.jpg" onmouseover="this.style.cursor='hand'" WIDTH="16" HEIGHT="15"></a></td></tr><tr><td><b class="bolddark"><%=dictLanguage("DomainPeriod")%>:</b></td><td><input name="DomainPeriod" size="20" value="<%=Session("DomainPeriod")%>" class="formStyleShort" onkeypress="txtDate_onKeypress();" maxlength="10"><a href="javascript:doNothing()" onclick="openCalendar('<%=server.urlencode(date())%>','Date_Change','DomainPeriod',150,300)"><img border="0" src="<%=gsSiteRoot%>images/calendaricon.jpg" onmouseover="this.style.cursor='hand'" WIDTH="16" HEIGHT="15"></a></td></tr>
To client-add-processor.asp
Code:sql = sql_UpdateClient( _session("Name"), _session("Rep"), _session("Client_Since"), _session("Standard_Rate"), _session("Address1"), _session("Address2"), _session("City_State_Zip"), _session("LiveSite_URL"), _session("DevSite_URL"), _session("Contact_Name"), _session("Contact_Phone"), _session("Contact_Email"), _session("Contact2_Name"), _session("Contact2_Phone"), _session("Contact2_Email"), _Active, _session("client_id"), _session("ClientFolder"), _session("HostingPeriod"), _session("DomainPeriod"), _session("Notes"), _session("WebFolder"))'response.write(sql)Call DoSQL(sql)%><!--#include file="../includes/main_page_open.asp"-->
includes/main_page_open.asp
Code:Function MediumDate(str) Dim aDay Dim aMonth Dim aYear aDay = Day(str) -line 104 'aMonth = Monthname(Month(str),TRUE) aMonth = Month(str) Select Case aMonthCase 1aMonth = "Jan"Case 2aMonth = "Feb"Case 3aMonth = "Mar"Case 4aMonth = "Apr"
SQL
Code:Function sql_InsertClient(Client_Name,Rep_ID,Active,Client_ Since,Standard_Rate,Address1,Address2, _City_State_Zip,LiveSite_URL,Devsite_URL,Contact_Na me,Contact_Phone,Contact_Email,Contact2_Name, _Contact2_Phone,Contact2_Email,HostingPeriod,Domain Period,Notes)dim sqlsql = "INSERT into tbl_clients (client_name,rep_id,active,client_since,standard_r ate,address1," & _"address2,city_state_zip,livesite_url,devsite_url,c ontact_name,contact_phone,contact_email,contact2_n ame," & _"contact2_phone,contact2_email,hostingperiod,domain period,notes) VALUES (" & _"'" & Client_Name & "'," & _Rep_id & "," & _Active & "," & _"" & DB_DATEDELIMITER & MediumDate(Client_Since) & DB_DATEDELIMITER & "," & _Standard_Rate & "," & _"'" & Address1 & "'," & _"'" & Address2 & "'," & _"'" & City_State_Zip & "'," & _"'" & LiveSite_URL & "'," & _"'" & DevSite_URL & "'," & _"'" & Contact_Name & "'," & _"'" & Contact_Phone & "'," & _"'" & Contact_Email & "'," & _"'" & Contact2_Name & "'," & _"'" & Contact2_Phone & "'," & _"'" & Contact2_Email & "'," & _"" & DB_DATEDELIMITER & MediumDate(HostingPeriod) & DB_DATEDELIMITER & "," & _"" & DB_DATEDELIMITER & MediumDate(DomainPeriod) & DB_DATEDELIMITER & "," & _"'" & Notes & "')"sql_InsertClient = sqlend Function
Thanks in advance for any pointers.
I don't understand why I'm getting this message.
I have a form that is based on a parameter query. The user inputs an item number and the form opens in edit mode. The user clicks the "duplicate" command button and then changes the item number. I've incorporated GHudson's "A Better Mouse Trap" logic and when clicking "save" I get the type mismatch error.
I don't understand why Access is not returning the 3022 duplicate entry error.
When I click "debug" Access highlights the line as shown below:
Err_bSave_Click:
If Err = 2046 Then 'The command or action Undo is not available now
Exit Sub
Else
MsgBox Err.Number, Err.Description
Resume Exit_bSave_Click
End If
End Sub
Any and all assistance is appreciated.
Randy
I am trying to do a basic query and I keep getting a "Type Mismatch" error and the query will not run. If I only do a query on one table, it works no problem so I know it must be related to my Join between tables.
For the two tables that are joined (it is one-to-many)- the first table is a clients table and I created a field called ClientNumber that is an AutoNumber. The second table is called TrainingRequests. This will store the training requests for each client and each client can have multiple training requests. I created a field called ClientNumber in it as well (this is what field I linked the tables by). But I set it to text instead of AutoNumber.
Is there a way to do a query with the two tables? Or will I have to change something in table design? I already have some data in the tables so I am not sure what direction to take.
Thanks for any help someone can provide. It would be greatly appreciated.
Could someone please help. I am in a serious time crunch and cannot figure out what I have done wrong. I have copied the module attached for the audit trail and have implemented it into my database. For some reason when I go to run the BeforeUpdate event I get a 13-Type Mismatch error. I have found a fix that will allow me to use the code without flagging an error, but I am not sure it is working properly now. Here is the fix.
1. Pass the form as an argument of the function
Function AuditTrail(frm as Form)
2. Comment out these lines in the code
'Dim frm as Form
'Set frm=Screen.ActiveForm
3. Call the function in the BeforeUpdate event of the form and or subform as follows:
Call AuditTrail(Me)
Many thanks,
CB
I've been trying to get a query to run but I keep the "type mismatch in expression" error message.It's the Invoice-Product Query in the attached file.I have tried changing the field types, the primary keys and messed around with the relationships but noting seems to work.
View 2 Replies View RelatedSo I have a macro in excel which imports data from the excel sheet to a table in access db. Now the excel file has 4 columns which have dates.
- I imported the excel file from access via access so that I can get the heading of the table and the table is created. Then I deleted all the data in the table.
- When the table was imported 2 of the date columns got set as Short/text data type. Dont know why.
- Now, if I leave the data type as it is in Access table, my macro button in EXCEL works fine and imports the data to Access. If I change the data type, in access design, of the two data columns to date type, I get the type mismatch error when I run the import macro button in EXCEL. I am going nuts over this error. I even created a blank table in access and defined data types to all columns which would be imported from excel. but still excel macro button shows the same error.
I checked the format of all the four date columns is date.
I did a lot of hit and try and could it be the case that if access table fields are defined properly, but any of the data columns cells in excel sheet is null/empty, it will show the type mismatch error.
is it possible and is there a way, that once the data is imported to access, I can convert the value in the column from short text to date type.