I have a small problem with dlookup multiple criteria. Vba code looks like this:
Code:
Label34.Caption = DLookup("[Spent_Hours]", "249_1_CHours", "[Date_Added]= " & Me.Text27 & " And [Shift] = '" & Me.Text29 & "'")
This gives following error:
Syntax error in number in query expression '[Date_Added]=4.02.2015 And [Shift] = '2'.
[Shift] column is a numeric field.
I have this payroll system:JJAEPAYROLL.accdb
In the "qryEmployeeWTax" i need to Lookup the [InitialTax] from the "qryreftbl_WTAX" based from the [ETPES] and [SalaryAfterStatutoryDeductions], so i am using this function:
Code:
InitialTax: DLookUp("[InitialTax]","qryreftbl_WTAX","[ETPES]=" & [ETPES] & "AND [ValueRangeStart]<=" & [SalaryAfterStatutoryDeductions] & "AND [ValueRangeEnd]<" & [SalaryAfterStatutoryDeductions])
But it doesn't work
I am able to use DLookup successfully using 2 criteria s in my "qryEmployeesStatutoryInfo"
I want to result as dlookup function in access 2007, when I use dlookup like this
=DLookUp("GPFDed","[SalaryAll]","[EMPID]='" & ![Cmb_EMPID] & "' And [SalMonth]='" & "Jan" & "' And [Salyear]='" & [me]![Label17].[Caption] & "'")
it gives #Name?
What is the problem and how can i change the label caption to Combo box column 2 value...
I have been trying to find a solution to why I can't get a Dlookup with multiple criteria to return the value I need.
Essentially I am trying to use an Order Number to find the item number which is contained within another table. However the order number has multiple lines (suffixes) which alter the item number. Therefore I am trying to have the item number be populated by the correct 'combination' of Order Number and line ("suffix").
I have managed to use the Dlookup in the after update of each box of the form separately and they retrieve values in the table correctly:
Afterupdate of main order number:
Code:
Private Sub OrderNumbertxt_AfterUpdate()
ItemNumbertxt = DLookup("item", "dbo_job", "[job] = '" & Forms![**INPUT]![OrderNumbertxt] & "'")
End Sub
Afterupdate of suffix:
Code:
Private Sub SuffixTxt_AfterUpdate()
ItemNumbertxt = DLookup("item", "dbo_job", "[suffix] = Forms![**INPUT]![SuffixTxt]")
End Sub
However when I combine them as follows in the afterupdate of the Suffix box I receive a "Run-time error '13': Type mismatch"
Code:
Private Sub SuffixTxt_AfterUpdate()
ItemNumbertxt = DLookup("item", "dbo_job", ("[suffix] = Forms![**INPUT]![SuffixTxt]") And ("[job] = '" & Forms![**INPUT]![OrderNumbertxt] & "'"))
End Sub
I think the reason is something to do with some being numbers and some being a combination of text and numbers (based on the replies of other topics), but have been trying to modify these slightly and can't get it to work still.
Also the Order Number is a combination of letters and numbers (normally in the form of AB12345678), the suffix is just a number between 0-9 and the Item number it finds is a combination of numbers and letters.
I have this
Code:
If Not IsNull(strCount = DLookup("[Number_Of_Records]", "All_Booked_Callbacks ", "[CallBack_Date] =#" & Me.CB_DAte.Value & "#" _
& " And [CallBack_Time] = #" & Me.CB_Time.Value & "#")) Then strCount = DLookup("[Number_Of_Records]", "All_Booked_Callbacks ", "[CallBack_Date] =#" & Me.CB_DAte.Value & "#" _
& " And [CallBack_Time] = #" & Me.CB_Time.Value & "#") Else strCount = "0"
All_Booked_Callbacks is a query which has a date and time columns and count of callbacks for that day and time, this always returns 0
I'm working with a table of bird survival data I am trying to summarize in a query. I've got a bit of a roundabout way to achieve my goal, but I'm curious if there is a simpler approach.
Background : In my table, each row represents a day I check a given nest and includes a [Nest ID] (not unique, multiple visits to each nest), a [visit ID] (auto numbered, so it's a unique value for each visit at each nest), the calendar day I visited a nest [Date], and [Survive] (1 or 0) depending on whether a nest survived or failed.
I'm trying to convert this detailed table into one that is more concise. Instead of each visit to a nest being a row, each nest becomes a row with 4 fields: The Nest ID, the minimum date (the day I found a nest), the last day a nest was checked (Max[Date]), and the last day a nest was checked alive (essentially max date where survival=1).
My current solution is to run 3 separate queries. The first queries the max date where survival=1, the second queries the max and min dates regardless of any other criteria, and the third brings both queries together.
I am curious if there is a way to create the same final product in a single query rather than doing multiple ones as I have done?
I try to put an expression for the property "bound column" so that my lookup values will be directly dependent on one of attribute's choice
I have got four options for my attribute. Each option will use a slightly different set of lookup values. I save all four sets in another table.
Then in my properties definition I refer directly to this table as lookup base. When I put bound column number equal to an expression so as to choose the right column of lookup values it refuses. It seems that it does notl ike anything other than a numeric value.
If that's a no-go, I am not sure how to achieve what I try to do then?
Essentially I have a table that 4 attributes: QID,itemID,CatType,Catchoice
CatType can have only 4 values. Each value will make Catchoice take on a different set of combo values
The problem I am having is that I am stuck at the Catchoice lookup definition because it is dependent on what kind of CatType the user picks.
I am using MS Access 2010 and have an issue with one of my forms. First off, I have a table called coefficient which contains a column MIN, a column MAX, and a column COEFF.In my form, called CALC, I want to grab a number that it is in textbox [Text12] and place the related coefficient number in textbox [Text15].I placed a control source in [Text15] using =DLookup("[COEFF]","coefficient","[Text12]>[MIN] And [Text12]<[MAX]").
View 2 Replies View Relatedcreating a DLookup expression for an unbound control on a report. This report displays data collected from the users from a table called tblaudit completed. This table contains (among others) three fields labeled below
Brand
Form
Area Changed
I also have another reference table labeled refevalareas. The fields in this table are as follows
BrandName
FormName
AreaName
PointValue
I would like to create an unbound control on my report that "prints" the point value depending on the Brand, Form, and Area displayed for each record. Though the field names are different the data collected and displayed in each table is consistent. I haven't worked much with Lookups and the logic is challenging for me to grasp but I think I have the basic idea which is shown below..
DLookup( refevalareas.[PointValue], refevalareas, ("[BrandName] = '" & Reports!rptqryauditcompleted![Brand] = "'") & ("[FormName] = '" & Reports!rptqryauditcompleted![Form] = "'") & ("[AreaName] = '" & Reports!rptqryauditcompleted![Area] = "'")
I have a database which I have been using for over a year now which includes a Dlookup formula in a report.The dlookup references the query QRYDwgCount and looks up the number of drawings issued by a particular architect. I have been using the following formula which was previously working
="Total drawing count for " & [IssuedBy] & " = " & DLookUp("CountOfDrawingNo","QRYDwgCount","IssuedBy = '" & [IssuedBy] & "'").
The problem I have now encountered is a new job with an architect that worked on another job already in the database. Instead of bringing forward the number of drawings issued by the architect for this current job, the formula is showing the number of drawings issued for the earlier job. I therefore need to add "ContractName" = [ContractName] but I am getting either Error or an incorrect answer as the result.This is what I have written:
="Total drawing count for " & [IssuedBy] & " = " & DLookUp("CountOfDrawingNo","QRYDwgCount","IssuedBy = '" & [IssuedBy] & "'" And "ContractName='" & [ContractName] & "'")
I can't seem to get past this expression/criteria problem.
[Actual] is my field I want to grab data from
[L3-4-5] is my main table
[CDATE] is a form control where the user enters a date
[Quarter] is a number field and want it to equal 1
[Partname] is a text field and string it to equal 1
My current expression is:
=DLookUp("ACTUAL","L3-4-5","ID=" & [CDATE] And "[QUARTER]=1" And "[PARTNAME]='1'")
Although my other expression on another form works.In my if code statement I have
Me.DAYS_TRAINED.Value = DLookup("Days", "TRAINED LH A-PILLAR", "ID=" & FTM_NAME)
So I think I don't understand the multiple criteria part.
I have a form with multiple combo boxes. Once the combo boxes are populated, I need the text box to look up the value in the query based on two combo box selections.I am attempting to do a DLOOKUP, but I am obviously not doing it correctly because the result is #NAME?.
Here is what I have done: In Default Value section of the txtONE property sheet: =DLookUp([fieldTHREE],[qryMAIN],[cmbONE].[AfterUpdate] And [cmbTWO].[AfterUpdate])
I have a form with combo box named "TEXT17" i have an another text box named(Basic Pay). How can I use dlookup creteria with two condition
EMPID= text17 value and
month in lbl9 value="mar"
I also paste my code here but show error
Me.Text43 = DLookup("Basicpay", "Salaryall", "[EMPID]='" & Me.Text17 & "'" And "[Month]='" & "Mar")
I've been asked to get involved in some access development but don't seem to be get my dlookup syntax correct.I essentially want to lookup what salary band different employees are in.I have two tables:
Employee Table) has the fields: Name, Type, Salary
Salary Band Table) has the fields Employee Type, Salary Band, Lower range, Upper range..my query syntax is:
Code:
Band: DLookUp("[Salary Band]","Salary Band Table", [Salary] & " BETWEEN [Lower range] and [Upper range]" & "AND " & [Type] & " = [Employee Type]")
I can get the first criteria to work but can't get the second part to work - currently it produces an error.
I have a table named z_ResltsSampleCountMonthly. In that table I have fields SampleSize, Month and LOB.
I have a report that I need to use a Dlookup in order to pull the SampleSize by LOB into my report. However, my report has three columns that change based on the start and end dates for the report. It shows current month plus the two prior months to show a trend.
So I have each column heading update automatically based on the dates the user enters into the start and end date on the main menu form.
If they select 12/1/14 to 12/31/14 the three columns heading would update to October 2014, November 2014, and December 2014. In the table I have the data for all three months so when I use this formula it works but it's putting September 2014 data under October 2014 so I need to have multiple criteria; one being the LOB and the other being the column heading which is equal to the field Month in the table.
Code:
=DLookUp("[SampleSize]","z_ResultsSampleCountMonthly","[LOB] = ""CMES""")
This is what I tried to do to add the second criteria to pull based on text59 being equal to the Month field in the table but it's not working:
Code:
=DLookUp("[SampleSize]","z_ResultsSampleCountMonthly","[LOB] ="CMES" And [Month] = ' " & [Text59] & " ' ")
I am new to Access (using Access 2012) and All I am trying to achieve is to autofill the field [Frequency] from Table FullList based on the value of [Frequency] from Table Courses using a DLookup code used to update the FullList form. The code is not updating anything! It is frustrating! Frequency is a number (integer) and while Course is a text. The figures of my Access database are below.
View 2 Replies View RelatedI am trying to return a single value from a table and assign it to a string to be used later but Dlookup isnt working at all. below is the code im using and the error message im recieving is "wrong number of arguements or invalid property assignment"
Code:
Sub boo()
Dim result As Integer
result = dlookup("Definition", "Config", "Parameter = 'Mail Folder'")
End Sub
I am trying to create a Dlookup in Access 2010 within a query using query wizard. I want to lookup the tax rate for an employee based on a salary range and their 'tax category' (string). Through troubleshooting I can get the criteria to work separately.
These are: DLookUp("Base","TABWT","[TABWT].[Taxclass] = '" & [FirstOfTaxGroup] & "'")
DLookUp("Base","TABWT",[grosspay] & " Between [TABWT]![Minimum] And [TABWT]![MaxBracket]")
These work and return the correct values for each column/row when I run the query.
However, when I combine the criteria (using the build wizard) as follows:
Expr1: DLookUp("Base","TABWT","[TABWT].[Taxclass] = '" & [FirstOfTaxGroup] & "'" and [grosspay] & " Between [TABWT]![Minimum] And [TABWT]![MaxBracket]")
The Dlookup will returns 0 values but will not give an error message.
I've tried quite a few variations on syntax and quotes and so on. However, it's just not working for me.
I have a form that has a field that needs to get its data from a query based on two fields in the form. The following is my DLookUp statement:
DLookup("[COMEX]", "OptionMetalsListQ", "[Metals] = '" & [cboMetals].[Column](1) & "'" And "[DateOfPrice] = " & Me.txtDateOfPrice)
Comex is a metal market. the bound column in cboMetals is text and The date is a date.I am getting the error "Run-time error '13': Type Mismatch.
Why does this work when the text box is used and not when the variable is used directly?
Code:
Private Sub Command61_Click()
Dim strDBName As String
strDBName = getDBName()
Me.Text59 = strDBName
Me.Text62 = DLookup("[ModuleName]", "tblModule", "[DatabaseName] = text59")
'Me.Text64 = DLookup("[ModuleName]", "tblModule", "[DatabaseName] = " & strDBName)
'Me.Text64 = DLookup("[ModuleName]", "tblModule", "[DatabaseName] = strDBName")
'Me.Text64 = DLookup("[ModuleName]", "tblModule", "[DatabaseName]" = strDBName)
End Sub
Text62 returns the correct value
Text64 failes on everyone of the examples
How to prevent duplicates on the combination of two fields - text & numeric?
I'm currently using the code below that warns users when the combination of two fields have already been used. (Combination of the TWO fields has to always be unique so if used again will warn the user)
Works well when both fields are numeric but fails when the JobDetails field is changed to text in the main table (tblPPMPLanner)
Code:
Option Compare Database
Option Explicit
Private Function IsDuplicateRecord() As Boolean
On Error Resume Next
Dim PreviousRecordID As Long
IsDuplicateRecord = False
[Code] ....
The field that should be a text field is called "JobDetails"
I would like to make a DLookup that check 2 criteria in two different columns in the same table. The reason to use a DLookup is that I would like to check if two parts already have been linked together. The user therefore selects two values in to different comboboxes (lstLinkPart and lstLinkToPart). In this case the value of the first combobox is column: ComponentPN in tblProductLinkComponent. For the second (lstLinkToPart) column ProductPN, in the same table, has to be checked.
If both values from the comboboxes match the values in both (and only) columns I don't want to continue and made a code to be executed.
I found multiple examples on the internet for using multiple criteria but something similar to what I require.
I am trying to make a DLookup function to return the ID number of an entry that matches 2 or 3 criteria but I am struggling to get the syntax correct for the second and third criteria.
Here is what I have so far:
1 criteria, works fine =DLookUp("[timedata]![id]","timedata", "[processdone] =" & Forms![Mainform]![p11] )
2 criteria, works fine =DLookUp("[timedata]![id]","timedata", "[processdone] = " & Forms![Mainform]![p11] & " And [timedata]![BGSnum] = 1001" )
BGSnum is a numerical value but it changes for each form I load, so what I want to do is use the form location value as the criteria.
E.g.
=DLookUp("[timedata]![id]","timedata", "[processdone] = " & Forms![Mainform]![p11] & " AND [BGSnum] = ' " & Forms![Mainform]![BGS] & "' ')
and possibly a third criteria too. This is where I am having problems and the syntax is wrong so MS Access wont let me save the macro.
i have tblDates that has two number long integer fields named FiscalYear and FiscalMonth. then there is my field PerSeq is number long integer.
in my Query1, i have 2 fields that use a question in the field part of the qry like:
Desired FiscalYear: [Enter Fiscal Year] EG 2007
Desired FiscalMonth: [Enter Fiscal Month] EG 2
And now the Qry question. The field in the qry "Desired BaseSeq". i want this dlookup to get PerSeq out of tblDates based on my response to the Desired FiscalYear and Desired FiscalMonth.
I start it out here but it is wrong i know.
Desired BaseSeq: DLookUp("PerSeq","tblDates","[Desired FiscalYear] And [Desired FiscalMonth]=" & [tblDates].[FiscalYear] And [tblDates].[FiscalMonth])
Thanks you.
I Have one main form in access 2003 i want to use Dlookup function to 1 text box with 2 criteria is it possible?
My Formula:
Text67. Value = DLookup("Balance", "dbo_WbookEdit", "[Lotno] = '" & Forms![Edit]![LotNo] & "'" And " & [Description] = '" & Forms![Edit]![Description] & "'")
I have two numeric fields: num_council and num_council_districts
num_council is entered first
num_council_districts has this edit:
>0 And <="[num_council]"
however it stops everything
clearly I'm not understanding something basic