Modules & VBA :: Data Type Mismatch Error When Running Sql Query
Jan 16, 2014
I have vba code that creates the following SQL:
SELECT SubscheduleID, EventID, WeekOrder, DayID, StartTime, EndTime, Priority, CanJoin, PatientTitle, PatientNickname, IncludesPatient, IncludesAftercare, Letter1
FROM [qryScheduleCombinedDetails]
WHERE (SubscheduleID = 1 AND IncludesPatient = -1 AND DuringAftercare <> "AC only" AND (WeekOrder = "All" OR WeekOrder = 3 OR (WeekOrder = 1 AND Letter1 = "XYZ")) AND DayID = 2 AND StartTime <= #8:00:00 AM# AND EndTime >= #8:30:00 AM#);
When I try to run it, I get a "data type mismatch" error. When I put the same code into a query, I get the same error. However, it will run if I delete either condition from within the (WeekOrder = 1 AND Letter1 = "XYZ") pairing. I can't figure why it can run with either of those, but not both together.
WeekOrder is defined as String. Letter1 is calculated as Cstr(Nz(IIf(Letter,"XYZ","ABC"))) within [qryScheduleCombinedDetails], because I wanted to make sure that it would be recognized as a string.
View Replies
ADVERTISEMENT
May 26, 2015
I am trying to get my VBA module to find the ID of a Member Number from a table using a dlookup but I keep getting a data type mismatch error,
Code:
Dim Answer As String
Dim varX As Variant
Dim rst As Recordset
Dim strSQL As Integer
Dim stWhereStr As String
Set db = CurrentDb()
[Code] .....
In the table the ID field is an automatic number and the Member Number is a short text field.
View 3 Replies
View Related
Mar 15, 2014
I have built in code a long sql statement as follows:
SELECT Age, BirdType, Flock, House, [Lab#], Organ, Origin, SampleDate, SampleType, Site, Source, SourceGroup,
[VT#], ProfileID, APIName1, APIAmts1, APILevels1, FullVals1, Match1, APIName2, APIAmts2, APILevels2,
FullVals2, Match2, APIName3, APIAmts3, APILevels3, FullVals3, Match3, APIName4, APIAmts4, APILevels4,
FullVals4, Match4, APIName5, APIAmts5, APILevels5, FullVals5, Match5, APIName6, APIAmts6, APILevels6,
FullVals6, Match6, APIName7, APIAmts7, APILevels7, FullVals7, Match7, APIName8, APIAmts8, APILevels8,
[Code] ......
When I try to open a recordset based on this sql, it gives me the runtime error - which is odd since I don't have any criteria in the statement.
I think the problem may be that vba is somehow adding a line break between "fullvals" and "18", but I don't know why it would do so and it doesn't always (only if the string is long).
View 9 Replies
View Related
Aug 11, 2014
I am getting Run-time error '3464': Data type mismatch in criteria expression when i execute the code:
Option Compare Database
Dim rst As DAO.Recordset
Dim rst1 As DAO.Recordset
Public verificacoes As Boolean
[code]....
View 5 Replies
View Related
Jul 15, 2015
I am getting a "type mismatch 13" error on this line
Code:
PrinterSel = Nz(DLookup("Device", "tblPrinterSelection", "Doc='" & DocumentType & "'" And "Computer='" & sHostName & "'"), "No Printer")
All vba variables are defined as strings. All fields in the table are text.
mafhobb
View 2 Replies
View Related
Jan 26, 2006
Hi
I am getting the following error when I try to present some information from a database:
Microsoft JET Database Engine error '80040e07'
Data type mismatch in criteria expression.
/tribute2.asp, line 168
The code relating to this is:
The error line it is talking about is:
Code:rsGuestbook.Open SQLstr, adocon
Code: <%Dim adoCon 'Holds the Database Connection ObjectDim rsGuestbook'Holds the recordset for the records in the databaseDim SQLstr'Holds the SQL query for the databaseSet adoCon = Server.CreateObject("ADODB.Connection")adoCon.Open = "PROVIDER=Microsoft.Jet.OLEDB.4.0;DATA SOURCE=c:inetpubftprootlocalusericlay
emember ing.co.nzdb
emembering.mdb;"strcustomerID = Request.QueryString("remID")Set rsGuestbook = Server.CreateObject("ADODB.Recordset") sqlstr = "select * from guestbook where guestbook.mid =" & strcustomeridrsGuestbook.Open SQLstr, adoconDo While not rsGuestbook.EOF'Write the HTML to display the current record in the recordsetResponse.Write ("<font face='Arial' size='2' color='#000080'><i>A tribute provided by ")Response.Write (rsGuestbook("confirstname"))Response.Write (" ")Response.Write (rsGuestbook("conlastname"))Response.Write ("</i></font><font face='Arial' size='1' color='#000080'><i> ")Response.Write (rsGuestbook("conrelationship"))Response.Write ("</i></font><br><br>")Response.Write (rsGuestbook("conmessage"))Response.Write ("<br>")'Move to the next record in the recordsetrsGuestbook.MoveNextLoop'Reset server objectsrsGuestbook.CloseSet rsGuestbook = NothingSet adoCon = Nothing%>
Can anyone see where I have gone wrong ... could it be something to do with the fact that 'remid' relates to another table in the database. Though when I did a reponse write on the sqlstr it is presenting the remid.
Hope this doesn't sound to confusing.
View 8 Replies
View Related
Mar 17, 2014
common error in VBA imports. It has happened with spreadsheets and text files I have users importing. An error message pops up "Type Mismatch." But the import appears to work correctly. So I added code that On Error, if error Like "*Type mismatch*" continue to next step. Now the user gets a longer error message: "The expression On Click entered as the event property setting produced the following error: Type mismatch." Again, the import still works, but this message is annoying! The even stranger thing is that I do not get this error message on my machine. Just the other users.
View 4 Replies
View Related
Dec 18, 2014
I'm trying to set email address for "Cc" using "Like" but showing error 13 Type mismatch. Problem only red mark code either all are working fine.
Code:
Private Sub cmdSendMail_Click()
On Error GoTo ErrorHandler
Dim strTo As String
Dim strSubject As String
Dim strMessageText As String
[code]....
View 14 Replies
View Related
Dec 3, 2013
I ahve declared custCount as an integer and id as a string that comes from the user form (id = me.CustID) and trying to count the number of matching records in the recordset (rst) using the following:
custCount = DCount("[customerId]", rst, "[customerId] like '" & id & "'")
I'm getting a type mismatch error on the DCount statement?
View 3 Replies
View Related
May 5, 2005
hi
I'm writing a pretty simple application to search an Access db. The query is:
Me.cmdSelectEvents.CommandText = "SELECT eventDetails.id, eventDetails.subject, " & _
"eventDetails.title, eventDetails.trainers, eventDetails.type, eventDetails.summary, " & _
"eventDetails.url, eventDates.date " & _
"FROM eventDates INNER JOIN eventDetails ON eventDates.id = eventDetails.id " & _
"WHERE (((eventDetails.subject)=@subject) AND ((eventDetails.type)=@type) AND ((eventDates.date)<@date));"
The parameters @subject and @type are simply strings selected from dropdown values.
The @date parameter is set by using a dropdown to select a timeframe to search in, specifically "Within 1 month", "Within 3 months", "Within 6 months". These options have the values "1", "3" and "6".
When the form is submitted the value of the selected option is passed into the following routine:
Dim valSelectedDate AsInteger
Dim dateParameter AsDate
valSelectedDate = ddlDate.SelectedValue
dateParameter = DateAdd("m", valSelectedDate, (Date.Now))
cmdSelectEvents.Parameters("@date").Value = dateParameter
When I run the debugger the right date value seems to be being passed to the sql query (i.e. if the user selects "within 6 months" and today's date is 5th May 2005, then #05/11/2005# is passed as the parameter) but I get the error data type mismatch. The column eventDates.date is a Date/Time column.
Can anyone help?
View 3 Replies
View Related
Aug 8, 2013
I am getting this error in a query. The field generating the error is a calculated field using a custom function.The function is:
Code:
Public Function DecimalTime(dblEvalTime As Double) As Double
DecimalTime = Hour(dblEvalTime)
DecimalTime = DecimalTime + (Minute(dblEvalTime) / 60)
DecimalTime = DecimalTime + ((Second(dblEvalTime) / 60) / 60)
DecimalTime = Round(DecimalTime, 2)
End Function
The dbalEvalTime parameter is passed in to the function as (DateIn+TimeIn)-(DateOut+TimeOut).
So the data type passed in is Double and the Function result is Double. The criteria i am applying in the query is simply <0.01. I have formatted the query field as #.00, 0.00 and General Number but it makes no difference.
I have also tried creating a second query using the first as its data source and applying the criteria in that query but still get the same error. Without the criteria the query runs fine.
View 12 Replies
View Related
Nov 22, 2011
I am creating a simple query in a farm audit database.
In criteria of the customers field, i have entered "Farmer One" as this is the customers data which I want to retrieve and in the Totals section I have changed the setting to Where instead of group by, but I am still getting "Data type mismatch in criteria expression" popping up.why this is?
View 2 Replies
View Related
Jul 13, 2015
I am trying to pass a recordset to a sub procedure as follows
Code:
Private Sub AddNewSProdStatus(rsTemp As DAO.Recordset)
rsSProdStatus.AddNew
rsSProdStatus![ProdID] = Me.Recordset![ProdStatusID]
rsSProdStatus![TitleID] = Me.Recordset![Title]
rsSProdStatus![ProdDealType] = 1
[Code] ....
However, whenever I call the procedure as below
Code:
AddNewSProdStatus (rsCSales)
I get a type mismatch error.
All Recordsets are declared as DAO and contain data...
View 1 Replies
View Related
Oct 17, 2013
Anyway I've got a type mismatch that I can't figure out.
Code:
dMaxLstReq = DMax("reqNumb", "FlightLog", "Month([txtDate])='" & frmMonth & "'" And "Year([txtDate])='" & frmYear & "'")
In plain english: Select the highest value in the field named reqNumb from FlightLog where the Month of txtDate is equal to the variable frmMonth and the year of txtDate is equal to the variable frmYear.
txtDate is a Date/Time field in the table FlightLog
frmMonth and frmYear are both integer variables that take the system time (sysTime) and determine the month and year: I.E.
Code:
frmMonth = Month(sysTime) & frmYear = Year(sysTime)
Am I correct in thinking that the fact that my variables are integers and not times, that this is the cause of the mismatch?
View 2 Replies
View Related
Jun 15, 2006
I am trying to do a basic query and I keep getting a "Type Mismatch" error and the query will not run. If I only do a query on one table, it works no problem so I know it must be related to my Join between tables.
For the two tables that are joined (it is one-to-many)- the first table is a clients table and I created a field called ClientNumber that is an AutoNumber. The second table is called TrainingRequests. This will store the training requests for each client and each client can have multiple training requests. I created a field called ClientNumber in it as well (this is what field I linked the tables by). But I set it to text instead of AutoNumber.
Is there a way to do a query with the two tables? Or will I have to change something in table design? I already have some data in the tables so I am not sure what direction to take.
Thanks for any help someone can provide. It would be greatly appreciated.
View 1 Replies
View Related
Jun 15, 2015
I'm having an issue with the database being read only and a type mismatch due to OpenRecordset. I know this database use to work when it when it was just
CurrentSerNum = RecSet(0) +1 was doing the incrementing.
I need the database to increment in a different way now.
Q=manufacture location
1st number is new=0 or used=1
2nd and third number =82
4th is single digit year aka 2015 = 5
6 and 7th are work week aka 25 for this week
8,9,10 are incremental numbers for the units made that workweek, so 001,002,003.
Then week 26 starts the increment starts back at 001.
Code:
Private Sub MakeThoseProducts_Click()
On Error GoTo Err_MakeThoseProducts_Click
Dim NumericSerial As Double
Dim WorkWeek As String
Dim WorkYear As String
Dim WorkWeekNumber As Integer
Dim WorkYearNumber As Integer
Dim Location As String
[Code] ....
View 14 Replies
View Related
Jul 31, 2005
Hi,
I have a query with a field defined in the query as follows:
Next Bill Date:
IIf(IsNull([dtmLastBillDate]),
DateSerial(Year([dtmDateRecd]),Month([dtmDateRecd])+1,15),
DateSerial(Year([dtmLastBillDate]),Month([dtmLastBillDate])+[lngNumMonths],15))
I can't seem to set any criteria for this field without getting an error:
'Data Type Mismatch in Criteria Expression'
Examples of criteria that I've tried:
=#1/1/2005#
>#1/1/2005#
=Date()
Year([Next Bill Date]) = Year(Now())
All of the above generate that same error.
{I've seen many pages/posts regarding 'data type mismatch' but none seem to relate directly to this situation.}
I could use some help, fast!
Thanks in advance,
David
View 1 Replies
View Related
Jun 23, 2012
"Data type mismatch in criteria expression" Error 3464
I get this on the <DoCmd.OpenForm "frmWrittenStatements"> in my code.
How on earth are any criteria attached to this?
View 2 Replies
View Related
Oct 17, 2006
I am trying to pass parameters to my qury thru my combo selection. I keep getting this error "Data type mismatch criteria expression", does anyone have an idea why?
WHERE (((fShiftWorked([tblTimeLog].[timeStart])=[Forms]![frmOperatorWorkDone]![cboShift] Or IsNull([Forms]![frmOperatorWorkDone]![cboShift]))=True));
I have spent so much time onthis already and i am sick of it :mad:
Attached is my db. Please help me out here.
View 2 Replies
View Related
Nov 8, 2014
The error I'm getting is "data type mismatch in criteria expression".
Private Sub BtnAddBooking_Click()
Dim CustomerID As String
Dim StaffID As String
Dim intPos As Integer
Dim strSQL As String
Dim strSQL2 As String
Dim BathValue As Integer
Dim rst As DAO.Recordset
Dim RemainingBookingExists As String
Dim RemainingBaths As Integer
Dim RemainingBathsExists As String
[code]....
View 2 Replies
View Related
Nov 4, 2006
Query1:
Src: Table1 joined Table2
ID (Type Text)
Title (Type Text)
Remarks(Type Text)
Formatted: FormatTitle([title],[Remarks])
Expr1: InStrRev([Formatted], "~")
public functionFormatTitle(ByVal sTitle as String, ByVal sRemarks as String) as String
'do process code here very complicated an long, but works find in the end
'creates a Multi-String delimited by | (pipe)
end function
The above works, and Expr1 does give an accurate value for the position of a "~" (tilde) in the string Created by the FormatTitle() function.
However, If I put a Criteria >0 on Expr1 it asks for the value of the [Formatted] field as if it was a parameter. If I put a criteria for Formatted: Like "*~*" I get a Data Type Mismatch in Query Criteria
Query2:
Src: Query1
Title (Type Text)
Remarks (Type Text)
Formatted(Type Text)
Exr1 (Type Number) criteria >0
This Query Also produces the Data Type Mismatch in Query Criteria
pardon me, but WTF? If it isn't a STring, than InStrRev() should produce an error, not an accurate response, and if InStrRev() produces a number why can't i compare it to 0 (zero)? This is indubitably messed up that I'm getting this error. There is no data type mismatch, on either of these tests, one is a string and I criteria-limit it by a string operation, the other is a number and I criteria limit it by a number, WHAT IS GOING ON!!!
Thanks
Jaeden "Sifo Dyas" al'Raec Ruiner - The Frustratedly Confused
View 2 Replies
View Related
Jun 11, 2013
Here's my Goal: To open a saved query that has a parameter, setting that parameter via a VBA sub.
Here's my Problem: I was getting various errors, but after debugging my program a bit, it comes down to a "Data Type Conversion Error"
Here's my Code:
Set db = CurrentDb
Set qd = db.QueryDefs("qryMY_DATA")
qd.Parameters(0) = Me.txt_ReferenceID
Set rs = qd.OpenRecordset("qryMY_DATA", dbDynaset)
Code:
'*** Database Variables
Dim db As DAO.Database, rs As DAO.Recordset, gq As DAO.QueryDef, prm As DAO.Recordset
I've been all over the forums and tried several different approaches, all to no avail. The Query runs fine in the QDT, but kicks back an error when I try to run it from my sub.
View 10 Replies
View Related
Dec 8, 2014
I'm receiving an error indicating there is a data type mismatch when running a query named qappInventoryTakeOn.
Data is entered into the Inventory Transaction Form. If the transaction type is "Take On", when the update button is clicked the record will be saved to tblInventoryMovements and then qappInventoryTakeOn should run to update tblInventory, but I keep running into the aforementioned error.
View 2 Replies
View Related
Jul 25, 2013
I have an update query for tGLCashAccount where it adds a value from another table with the BeginningBalance to arrive at CurrentBalance.
Here's what it looks like in design view:
Field: CurrentBalance
Table: tGLCashAcct
Update to: [tMakeNewCashBal].[TotalPrice]+[tGLCashAcct].[BeginningBalance]
Here is SQL code:
UPDATE tGLCashAcct, tMakeNewCashBal SET tGLCashAcct.CurrentBalance = [tMakeNewCashBal].[TotalPrice]+[tGLCashAcct].[BeginningBalance]
WHERE (((tGLCashAcct.GLCashAcctID)="102"));
I get the error: data type mismatch in criteria expression when I run it.
View 3 Replies
View Related
Feb 25, 2005
Hi I'm doing some work on an open source intranet for a friend and I've come unstuck with data types I guess.
Microsoft VBScript runtime error '800a000d'
Type mismatch: 'str'
D:SITESEXTRANETCLIENTS../includes/connection_open.asp, line 104
I added a date field and now get this error.
The process is as follows:
add user - client-add.asp
client-add-processor.asp (& siteSQL.asp include)
the error occours on submiting the original form page
new feilds:
Code:<form method="post" action="client-add-processor.asp" name="strForm" id="strForm">..............edited...............<tr><td><b class="bolddark"><%=dictLanguage("HostingPeriod")%>:</b></td><td><input name="HostingPeriod" size="20" value="<%=Session("HostingPeriod")%>" class="formStyleShort" onkeypress="txtDate_onKeypress();" maxlength="10"><a href="javascript:doNothing()" onclick="openCalendar('<%=server.urlencode(date())%>','Date_Change','HostingPeriod',150,300)"><img border="0" src="<%=gsSiteRoot%>images/calendaricon.jpg" onmouseover="this.style.cursor='hand'" WIDTH="16" HEIGHT="15"></a></td></tr><tr><td><b class="bolddark"><%=dictLanguage("DomainPeriod")%>:</b></td><td><input name="DomainPeriod" size="20" value="<%=Session("DomainPeriod")%>" class="formStyleShort" onkeypress="txtDate_onKeypress();" maxlength="10"><a href="javascript:doNothing()" onclick="openCalendar('<%=server.urlencode(date())%>','Date_Change','DomainPeriod',150,300)"><img border="0" src="<%=gsSiteRoot%>images/calendaricon.jpg" onmouseover="this.style.cursor='hand'" WIDTH="16" HEIGHT="15"></a></td></tr>
To client-add-processor.asp
Code:sql = sql_UpdateClient( _session("Name"), _session("Rep"), _session("Client_Since"), _session("Standard_Rate"), _session("Address1"), _session("Address2"), _session("City_State_Zip"), _session("LiveSite_URL"), _session("DevSite_URL"), _session("Contact_Name"), _session("Contact_Phone"), _session("Contact_Email"), _session("Contact2_Name"), _session("Contact2_Phone"), _session("Contact2_Email"), _Active, _session("client_id"), _session("ClientFolder"), _session("HostingPeriod"), _session("DomainPeriod"), _session("Notes"), _session("WebFolder"))'response.write(sql)Call DoSQL(sql)%><!--#include file="../includes/main_page_open.asp"-->
includes/main_page_open.asp
Code:Function MediumDate(str) Dim aDay Dim aMonth Dim aYear aDay = Day(str) -line 104 'aMonth = Monthname(Month(str),TRUE) aMonth = Month(str) Select Case aMonthCase 1aMonth = "Jan"Case 2aMonth = "Feb"Case 3aMonth = "Mar"Case 4aMonth = "Apr"
SQL
Code:Function sql_InsertClient(Client_Name,Rep_ID,Active,Client_ Since,Standard_Rate,Address1,Address2, _City_State_Zip,LiveSite_URL,Devsite_URL,Contact_Na me,Contact_Phone,Contact_Email,Contact2_Name, _Contact2_Phone,Contact2_Email,HostingPeriod,Domain Period,Notes)dim sqlsql = "INSERT into tbl_clients (client_name,rep_id,active,client_since,standard_r ate,address1," & _"address2,city_state_zip,livesite_url,devsite_url,c ontact_name,contact_phone,contact_email,contact2_n ame," & _"contact2_phone,contact2_email,hostingperiod,domain period,notes) VALUES (" & _"'" & Client_Name & "'," & _Rep_id & "," & _Active & "," & _"" & DB_DATEDELIMITER & MediumDate(Client_Since) & DB_DATEDELIMITER & "," & _Standard_Rate & "," & _"'" & Address1 & "'," & _"'" & Address2 & "'," & _"'" & City_State_Zip & "'," & _"'" & LiveSite_URL & "'," & _"'" & DevSite_URL & "'," & _"'" & Contact_Name & "'," & _"'" & Contact_Phone & "'," & _"'" & Contact_Email & "'," & _"'" & Contact2_Name & "'," & _"'" & Contact2_Phone & "'," & _"'" & Contact2_Email & "'," & _"" & DB_DATEDELIMITER & MediumDate(HostingPeriod) & DB_DATEDELIMITER & "," & _"" & DB_DATEDELIMITER & MediumDate(DomainPeriod) & DB_DATEDELIMITER & "," & _"'" & Notes & "')"sql_InsertClient = sqlend Function
Thanks in advance for any pointers.
View 3 Replies
View Related
Jun 3, 2014
I am trying to construct a crosstab that averages a calculated field from a previous query. It is returning a "Data Type Mismatch" message.
The field I am trying to average is a subtraction of dates to find total days. I assume my field is not a number so I have tried to wrap it in CDbl() to change the type.
The formula is
Code:
CASE_DAYS: CDbl(IIf([Actual Close Date]-[Creation Date]>=0,[Actual Close Date]-[Creation Date],""))
View 5 Replies
View Related
