Modules & VBA :: Double Click Listbox To Populate Form Textbox
Jul 27, 2015
In the past a Teacher would manually create a Form (Student Form) containing Student information, (Name, Gender, Birthdate, Homegroup) as well as additional issues on the student. This would all be saved into a table.
I would like to change this manual process of typing in individually to each text box, therefore, I have been able to run a report from a external program that obtains (Name, Gender, Birthdate, Homegroup). This saves as CSV and I am able to import into a separate table within the database.
This works no problem.
What I have set-up is a form that contains a listbox this contains the Student name and Homegroup from the imported table contents. Again this works fine.
What i would like to do is when a student is selected from the listbox and dbl clicked on, how can i make information (Name, Gender, Birthdate, Homegroup) populate the textboxes in the Student form that the teacher previously used? could this be an update query where the imported table information will then go into the Student form? If so, how can I tell the dbl click of highlighted name is the data i want to populate?
I have an access form which i have turned of menus, navigation and shift key. What I am looking for is to have buttons on my form to allow users to create and delete queries from my form. I already have a listbox that shows all the queries and runs them when a user double click on them.The codes needs to run in access 2007-2013 in both 32 & 64 bit versions.
I have a datasheet view where the 1st field has an event.
Private Sub WorkOrder_Click() DoCmd.OpenForm "Engineer Entry Update", WhereCondition:="[Workorder]=" & Me.WorkOrder End Sub
The form "Engineer Entry Update" opens but the require data in not there until I press the WorkOrder_Click() again.Then it is populated. Why do I have to double press?I would like a single click to open the form a populate.
Trying to pull information from a text box on double click to populate a combobox on another form...
keeps coming up "type mismatch"
I call lngAccount as recognised on mouseover... ("Business Account" is the value I want)
I can't get it to work!
For info, the form I'm calling from is a subform located FrmMainMenu/FrmAccountsMainMenu and the control source is [Account]
the form I wish to populate in on FrmTransactions (it is a main form only) and the combobox is cboaccountselect - **I've seen the obvious mistake with no reference to this whatsoever, corrected it, and still not working**
I'm in desperate need of a (simple I guess) code to allow me to send records from my listbox to a new form. Scenario goes as follows:
I use cascading combo boxes to narrow my available choices and finally end up with a listbox presenting the records filtered through cascading process. Now, I want to double-click on a record and load a new form with all this record's fields.
This is the code used to populate the listbox:
Private Sub FilterTypeList() Dim strRS As String ' Filter the list box appropriately based on the combo box selection(s) strRS = "SELECT qryTaxonomy.Type, qryTaxonomy.Article FROM qryTaxonomy"
[Code] ....
What is the code to open a form with the double-clicked record's fields, as described above?
I have a list of companies in a table which Is being accessed through a list box. I wanted the user to be able to double-click on the name of a company from that long list and then for that selection to show up on an adjacent shorter list box which in turn will be used for a search. How can I do this? Another option would be to drag and drop the name from on list to another.
This is probably failry simple if you know what you're doing, but I don't know what I'm doing....
I have a form (Purchase Orders) and on that form there is a search button to allow the user to search the customers table by customer name. When the user clicks the search button a search form opens and the search results (customer number, first name, last name) populate a list box named "lstCustInfo". How can I set the list box double click event to return the customer number, first name and last name to the Purchase Orders form? To make it even more complex I would like to return the data in two fields: customer number and LastName, FirstName. The problem with returning the results in two fields though is that I need to be able to break it into three to save it in the customers table because the table has a place for Customer Number, First Name and Last name.
Does anyone have any suggestions? Is there a better way to do this than returning 2 fields and having to break it back into 3 to store?
First, I want to say I would REALLY appreciate any help I could get with this problem. Let me lay out the details.
I DO NOT, DO NOT, DO NOT know the first thing about programming for ms access. I am an absolute novice, no exaggeration at all. I was a liberal arts major in school!!!!!
Here's the thing: being adventurous and all, about 2 years ago a co-worker and I were fiddling with databases to try and help out our employer keep track of dispatching his equipment for his business. With a little too much time on our hands, before we knew it, our database became fairly complicated, for such novices. A kind gentleman on this forum did us an enormous favor, and programmed a search form for our database. you could enter any or all of the id #'s for various equipment, and it would pop up in a list box. Double-clicking the listbox would open the particular record you were looking for.
Fast-forwarding to now, I'm trying to create another database to keep track of our inventory while while various equipment moves in and out of our yard. I have tried using the old search form as a foundation to create a similar search form for this db. I think I actually have it (kind-of) working! You type in a container number, and the record should pop up. which is a miracle all its own.
problem is, is that when you doubleclick the selection in the list box, I receive the following error:
I don't know what to do! I'm sure it must be something painfully simple or obvious, but I'm really stuck & would appreciate any help.
Also, I would really appreciate any advice on this: I'd like to also be able to search by chassis # in addition to container number, but i don't know how to do it. no big deal, though. THANKS SO MUCH!!
p.s., I've attached the db. please let me know if you can open it ok
i will show you my list box code. i would like to make it possible for my user to double click on an item in the list and it opens that record in my 'zEnquiry' form (which has the correct named fields to display the data already)
i had some double click code but i deleted it, and now ive forgotten which post i found it in.
here is the code for my listbox
Private Sub QuickSearch_AfterUpdate()
DoCmd.Requery Me.RecordsetClone.FindFirst "[Enq_Forname] = '" & Me![QuickSearch] & "'" If Not Me.RecordsetClone.NoMatch Then Me.Bookmark = Me.RecordsetClone.Bookmark Else MsgBox "Could not locate [" & Me![QuickSearch] & "]" End If
the user searches records and they are filtered..http://www.londonheathrowcars.com/searchform.jpghttp://www.londonheathrowcars.com/searchquery.jpgand when they double click i want the record to open in this form..http://www.londonheathrowcars.com/showform.jpghttp://www.londonheathrowcars.com/showquery.jpgtrying to put this code on my listbox but gettin the openform cancelled 2501 error on the bold line.. anyone see why?Private Sub QuickSearch_DblClick(Cancel As Integer)Forms("searchform").SetFocusForms("searchform").RecordSource = vbNullStringDoCmd.OpenForm "showform", , , "[jobref] = " & Me![QuickSearch].Column(0)End Subnote:on the search form.. the form has no record source.. the listbox has the record source of the searchquery..also on the show form.. the form has the record source of the showquery.
I currently have a listbox. (list32) that is populated with results of a query. I would like to doubleclick on an item and have it open a form that displays the listbox record i clicked on and a "notes" field. Its my understanding that the table fields are limited to 255 chars so i was curious if I could make the notes field reside somewhere else. I will need the notes able to be edited, specific to record entry, and then saved on exit. Is this doable?
Is it possible to load the data in input from by double clicking on data from list box ?
I have single form on which both input form and read-only form is present. as i used visible property to display or not accordingly.
User enters the data from input form. (It has been done)
User go onto read only form where combo box and list box. from drop down values load into list-box. (It has been done)
Now double click on any record then it should re-directed on input form with loading the data in editable mode for updation purpose. ???? (How this step will be done) ?
I would like to select a record on an already open form called "form_candidates" using a search facility but can't get it to work.
In "form_candidates" the data settings are set to "yes" (filters/edits/deletions/additions) and data entry is set to "no". On opening, the form is set to go to a new record.
In this form I have a button that opens a record search form so both forms are now open. I enter the first few letters of the surname into a text box, press a button and the listbox is populated.
In the doubleclick event of the list box I have the following code:
Dim CandID As Integer CandID = Me.List4.Column(0) DoCmd.OpenForm "form_candidates", acNormal, , "forms![form_candidates]![Cand_ID]=" & CandID
So I double click on the record, the candidate form is being filtered but the record isn't being shown.
hi, i have list box and the source coming form Query. i want when i click on one in list box want it will show [faults] field in textbox from query the field [faults] is a memo can someone help me __________________ David
Whenever I double-click a graph in a form that is being viewed it opens up MS Graph in edit form. This is confusing/ugly/etc and I don't want it to do that.
I tried adding some code to the double click event to make it do some other action (bringing up some graph modification tools I created), but as soon as those are closed MS Graph will then open up in edit form.
How to turn this off? It's incredibly unprofessional.
I am trying to populate a textbox from a field in a table based on clicking on a item in a listbox. User clicks a name from the Client table in the client field, and the date that is stored in the orderDate in the same row. I want the text11 textbox to show that date.
I have a few search forms that, when search parameters are entered, a continuous subform displays the results (summarised...not all fields show).
I want to be able to double click a field in any given record, and have it open in a form allowing editing of the record.
I know I need something in the OnDoubleClick event of the text box I want to double click, which would then open the form, but I don't know what code to use.
For the sake of argument, I want to double click on the txtSerialNumber text box to do it, as this is a unique field.
I all I have looked in the forum but can't find anything that matches I have a form containing a subform called eventswich shows some events in date order, as I have too many information on the table events I could not put them all in the subform if not only the essential information, what I need is if I double click on the field "DATE" it would open the "EVENT" form and show me all the information contained in the record.At the present time I have the filed SELECT RECORD set to NO on the form properties! Hope I have given a good explanation!!!! Thanks Marco
I have the following code that I have been trying to get to work:
Private Sub txtSocNumber_DblClick(Cancel As Integer) On Error GoTo Err_txtSocNumber_DblClick
Dim stDocName As String Dim stLinkCriteria As String
stDocName = "FrmApplicantFullDetails"
If IsNull(Me.txtSocNumber) Or Me.txtSocNumber = "" Then MsgBox "This record is empty", vbInformation, "No Data" Me.txtSocNumber.SetFocus Else stLinkCriteria = "[ApplicantID]=" & Me![InvestigatorID] DoCmd.OpenForm stDocName, , , stLinkCriteria End If
Exit_txtSocNumber_DblClick: Exit Sub
Err_txtSocNumber_DblClick: MsgBox Err.Description Resume Exit_txtSocNumber_DblClick End Sub
I have the following two tables:
Applicant and Investigator
Applicant: ApplicantID InvestigatorID etc
Investigator: InvestigatorID etc
The relationship is setup as 1 investigator to many applicants.
What I am trying do is this. I have form with a subform in it. In the subform there is applicant info IE SS# LName, FName and that is it. What I want to do is be able to double click on the SS# have the form "FrmApplicantFullDetails" open so you can view the work up on the applicant or edit info on the applicant.
Am I going about this the right way with the above code? Or is there something else I am missing in the code or is there code out that will do what I am looking for that is easier?
I need created a form frmFlight this form has two fields called DEP and ARR what I need is when the users types the 3 letter code in the DEP or ARR field if these do not match the any records in field AirportCode in the table tblAirport will highlite a error. Also I need to double click on the field DEP or ARR in the frmFlight and open the frmAirport with the specific record. Example if one of the records contain LCY by double clicking it will open the form frmAirport displaying the LCY record.
I want to add an event on Form Header when double click it will filter the values, which i did with macro, but could it happen on second time double clicking it it refreshes whole as original?
I have a mainform named EMA and a subform named Q_EMO. In the mainform there is one event related to a patient.In the subform Q_EMO there are all the events releted to the patient.I would like to get a record in the mainform EMA when I double click in the record of the subform.
I am trying to create a proposal log for my company to make things easier to track. I have made a multiple items form to list the proposals. I want to be able to double click the record to open up another form (that i have already created) that shows the information from the proposal table and the proposal details table. So.....
I want to double click the field named "Proposal Name" and have it open up to form i have called "proposals details form".