I want to know if it's possible to make a dynamic select case. In my form I have 3 separate combo boxes. What I want to happen is depending on what was selected in one the options in the other two change and if you select something in the second the option in the third narrows down again. The user can select these in any order. They can use one by itself or all three independently. In my code I can do this with many select statements, e.g
Select Case Me.combobox1.Value
Case "choice1"
Forms!CurrentForm!combobox2.RowSourceType = "Table/Query"
Forms!CurrentForm!combobox2.RowSource = "SELECT fieldname FROM tablename WHERE fieldname = '" & Me.combobox1.Value & "'"
End Select
In the place I have "choice" is it possible to write something along the lines of,Me.combobox1.value = "SQL Code"..The idea that this code would still work if the user adds more data to the tables which these combobox choices come from.
When I run the below code I am getting the error "End Select without Select Case" I figured it might be because I have the "End Select" before the "End With" however when I move the "End Select" after the "End With" I get the error "Loop Without Do".
Code: Private Sub cmd_Update_Conditional_Codes_Click() Dim rs As DAO.Recordset Dim rs2 As DAO.Recordset
My problem now is about evaluating the result of that query in order to calculate quarterly and annual performances. The query returns correctly:
1) NULL - when I don't have values in the given month 2) 0 - when one of the components of the performance formula is 0 3) value (positive or negative) which can include any positive or negative value
In order to calculate the quarterly values I need the performance of the last month in the quarter and the first month in the quarter. My monthly values are stored in columns so say for Quarter 1, I would need something like this:
Code: [mar]/[jan]-1
As you might have thought, the problems come when I have NULL or 0 values. Let me give you a couple of examples.
[jan] is NULL [feb] is a value [mar] is a value
Than my formula would have been
Code: [mar]/[feb]-1
Second case:
[jan] is 0 [feb] is 0 [mar] is 0
In this case I would like the formula return '-' because I want to be able to spot the case in which the quarterly performance is 0 because the initial values were 0 from the case in which the performance was actually 0 (i.e., say [jan] = 101 and [mar] = 101 then performance is 0 which is different from having [jan] and [mar] = 0 thus performance '-').You can combine the three states (NULL, 0, value) with the three months and find many combinations (I have found 27 relevant ones).
I initially thought to use SWITCH in SQL to evaluate the 27 combinations but I found out that SWITCH would evaluate non more than 15 conditions. So I guess the solution should be use a function in VBA which does what I was about to do with SWITCH in SQL.
I have built a test function which evaluates the numerator of my formula using only two cases (CASE 1: all variables have a value <>0, and CASE 2: the first month is null, the second is 0 and the third a value). Here the code:
Code: Function evaluate_s(Var1, Var2, Var3) As Double Select Case Var1 Case Is <> 0
[code]....
My main question here is what is wrong in the syntax of my function. Why is not correctly evaluating at least the two cases in my function? I always get 0 for all records.
I have a boolean array, foundState(3), whose 4 elements correspond to 4 variables describing conditions that will dictate what action is taken upon closing a form.
There are only 6 possible outcomes for the array, and they can be divided into just 4 cases:
Case {T,T,T,T}
Case {T,T,T,F} OR {T,T,F,F} OR {T,T,F,T}
Case {T,F,F,F}
Case {F,F,F,F}
What the proper syntax would be for this if I'm trying to create a "Select Case" statement for these 4 cases.
I have an issue with this case select below. The DelayStart is time so lets say I put in the debug window
?DatePart("h", #04:00pm#)
The result would be 16 which is correct BUT the issue is my second shift starts at 04:01pm and the result is still 16 untill 5pm. How do I fix this so I get the correct shifts? Im guesing use something other than DatePart but what?
Code: Public Function getShiftForRecord(DelayStart As Variant) On Error Resume Next Select Case DatePart("h", DelayStart) Case 6 To 16 'Daylight 6:00am - 4:00pm
I am trying to add various values based on Select Case to the value of field. The problem I face is that each time when I get different Case in select statement, the value of the field rather changing adds the value on top.
Code: Private Sub ProductID_AfterUpdate() Dim qflPrice As Variant Dim db As DAO.Database Dim rs As DAO.Recordset Dim sqlQry As String Dim instID As Integer
I have this code in an event property on a report and it is working great. However, I now need to do a second case based on which modules are down. Is it possible to have a select case within a select case? I have the select case for the systems now with in each system I need a select case based on modules?
Dim dbs As DAO.Database Dim rst AS DAO.Recordset
Set dbs = CurrentDb Set rst = dbs.OpenRecordset("Select * From YourTable") While Not rst.EOF And Not rst.BOF Select Case rst![System Number] Case 42144 ' do this Case 88754 ' do this Case Else ' do this End Select rst.MoveNext Wend rst.Close Set rst = Nothing Set dbs = Nothing
I am trying to calculate a date in the future based on an entered date and the sample falling into one or more categories.
Fields: Start Date, manually entered Interval, combo box, choice of monthly or weekly Pull Interval, combo box, choice of Long term, Short Term, or Stressed Conditions, combo box, choice of 25°C, 40°C, or 60°C 1 Week, calculated field 3 Month, calculated field
What I would like to happen is that when the Interval box is the choice of monthly that the 3 Month field calculates the date 3 months from the start date. Also, if the Interval field is weekly the 3 Month field is to be left blank. I have managed the Dateadd function to calculate the 3 month date, but do not know how to incorporate the condition of the weekly statement to leave the 3 month field blank. Also where should I put this, right now I have this calculation in a subform. Would it be best to generate this in a query? and if so how do I set this up?
Also, I need to select that the Pull Interval is Long term that I can only choose the Conditions field, 25°C, Interval field as Monthly, and only calculate the 3 month time point. Same thing with the Short term and stressed Pull Intervals, I want when they are selected to only allow me to look at fields relative to those conditions.
Any help would be extremely appreciated. I have several books and they are not spelling out exactly what I need, and with my limited programming experience I am stuck.
Thanks ChrisB37 ChrisB37View Public ProfileSend a private message to ChrisB37Find all posts by ChrisB37Add ChrisB37 to Your Buddy List
Can someone put a newby straight please? Why do I get a 'NAME' error from this? Many thanks in advance Don
Select Case SortOrd Case "a": Me.SortOrd.DefaultValue = "B" Case "b": Me.SortOrd.DefaultValue = "C" Case "c": Me.SortOrd.DefaultValue = "D" Case "d": Me.SortOrd.DefaultValue = "E" Case "e": Me.SortOrd.DefaultValue = "F" Case "f": Me.SortOrd.DefaultValue = "G" Case "g": Me.SortOrd.DefaultValue = "H" Case "A": Me.SortOrd.DefaultValue = "B" Case "B": Me.SortOrd.DefaultValue = "C" Case "C": Me.SortOrd.DefaultValue = "D" Case "D": Me.SortOrd.DefaultValue = "E" Case "E": Me.SortOrd.DefaultValue = "F" Case "F": Me.SortOrd.DefaultValue = "G" Case "G": Me.SortOrd.DefaultValue = "H" 'Case Else 'Me.SortOrd.DefaultValue = "Oops" End Select
I have a query which contains many nested IIF-statements. Due to that, my database is running terribly slow. I want to use a 'SELECT CASE' statement because I think this would be faster.
In order to get used to the SELECT CASE-thing I created a new database and I implemented a query with the following SQL-code:
SELECT ColorID, 'Colorvalue' = CASE WHEN Color = 'Green' THEN 100 ELSE '0' END FROM Color.Colors
(Color is a fieldname, Colors is a tablename)
This code is not working, between CASE and WHEN is something wrong according to Access.
Probably I am overlooking the obvious, does anyone has a tip for me??
I wonder if any one can help with this one, shown below are 2 examples of strings in a field called PROCOM
Occurred: EnterMeterReadings; Reason: Reading greater than upper limit; Session: 0A52BE4293.worker1
MSPSubmitMeterReadings; Reason: CANNOT BILL LATER THAN 29/02/08, DATE AMENDED FROM 13/03/08
I ususally nest IIf statements to abbreviate these in another field (PROC), as PROC: IIf ([PROCOM] like Occurred: EnterMeterReadings; Reason: Reading greater than upper limitMRE-Upper limit",[PROCOM])
The problem I have is there now 30 permutations of the error and IIF can only nest 8 statements (and it looks very messy). I thought that Select Case would do the job but I cannot use
Select Case
Case Is Like "Occurred: EnterMeterReadings; Reason: Reading greater than upper limit*"
Hiya is there an easier way of grouping together 'Select Case' statements rather than this way I have done them. They work but I still have more to add and feel this way is a little long winded! Private Sub Form_Current()
Select Case DatePart("w", Tape_Date) Case 1, 3, 5 Me.Datapulse.Visible = True Me.Label86.Visible = True Me.Label87.Visible = True Case Else Me.Datapulse.Visible = False Me.Label86.Visible = False Me.Label87.Visible = False End Select
Select Case DatePart("w", Create_U607ST50) Case 6 Me.Create_U607ST50.Visible = True Me.Label88.Visible = True Me.Label89.Visible = True Me.Label129.Visible = True Case Else Me.Create_U607ST50.Visible = False Me.Label88.Visible = False Me.Label89.Visible = False Me.Label129.Visible = False End Select
Select Case DatePart("w", U607ST94) Case 6 Me.U607ST94.Visible = True Me.Label90.Visible = True Me.Label91.Visible = True Case Else Me.U607ST94.Visible = False Me.Label90.Visible = False Me.Label91.Visible = False End Select
I am trying to select a different query based on the selection in the [Product] Field. I have 4 different products and 3 different queries to run. Each product is specific to a particular query.
What I would like is: When Product 3 is chosen "Query 1" is ran. When Product 1 is chosen "Query 1" is ran. When Product 2 is chosen "Query 2" is ran. When Product 4 is chosen "Query 3" is ran.
As it is set up now it appears that when choosing Product 1 I open Query 2 and when choosing Product 2 I open Query 1, but it is the opposite of that. I get the correct query with this code by choosing Product 1 and the Query that opens is actually Query 1, I don't know what is going on here.
When I open Products 3 & 4 it always opens Query 2, no matter what Query I specify.
Please help me sort this out. I am not very familiar with case select. Thanks
Private Sub run_query_Click() On Error GoTo Err_run_query_Click
Dim stDocName As String stDocName = "Query 1" (Should be for Product 1 & 3) stDoc1Name = "Query 2"(Should be for Product 2) stDoc2Name = "Query 3" (Should be for Product 4)Select Case stProtocolName Case [Product] = "Product 1": DoCmd.OpenQuery stDoc1Name, acNormal, acEdit
Case [Product] = "Product 2": DoCmd.OpenQuery stDocName, acNormal, acEdit
Case [Product] = "Product 3": DoCmd.OpenQuery stDoc1Name, acNormal, acEdit
Case [Product] = "Product 4": DoCmd.OpenQuery stDoc2Name, acNormal, acEdit
Can someone simplify my feeble scratching at a Case Select statement, please?
I have two fields in a table (True/False): IsActive and IsDefault
I would like to convert some If...Else...Then statements to a Case Select statement which details what should be done when any of the possible states of the two fields exist.
Semi-Psuedo example in the (subform) Form_Current Event: With Me If !IsActive = True And !IsDefault = False Then Do Something on the Parent form ElseIf !IsActive = True And !IsDefault = False Then Do Something Else on the Parent form ElseIf !IsActive = True And !IsDefault = True Then Do Something Else Again on the Parent form Else Do Something Entirely Different End If End With
What blows my mind is the Select Case Expression bit. I can't figure out how to write this. Any help is greatly appreciated.
I re-arranged things in the code to try to make it clear as to whats going on. But I'm at a loss to why the qry will only run once. When I open the db and add a new record it works, when I try to add the next one, it doesnt....
Is this an issue with Access or is it me? I stripped it down in case someone could look at it....
The a mousehook module in the db to prevent scrolling..
If I write a select case statement for a field X i.e. 6 to 7 for example will this:1. Select any fields X where the number is greater than or equal to 6 but less than (and not including) 7B. Select any fields X where the number is greater than or equal to 6 but includes decimels of 7 i.e. 7.5 ORC. Select any fields X where the number is greater than or equal to 6 but includes but literally only includes cases where the the whole number 7 appears>I only ask because in an example in a book I am looking at says:Case 10000 to 20000......Case 20001 to 30000I would have through the word "to" means until but not including but in this case the field that equals 20000 would never be selected?
After reading some of what people already had in this forum, I was still left a little confused. Say I have a form with three combo boxes and I want the user to be able to select something from all 3 or just one at a time. Which kind of query should I be using. Right now I have a select query, but it doesn't work right due to the Where Clause, which will work 1 way or the other, but not both(that I know of). Any advice would be appreciated. Thanks.
I am using the selections made of the form to generate a query for the user.
I have a CITIES listbox that is populated with values from a stored query.
I would like to make it multi-select and populate a LOCATIONS list box and a NAMES list box based upon the CITIES that are selected.
I have the locations currently populated from a stored query that reads the City selection from the Form. It looks like this
Code:
SELECT DISTINCT (t_location.LOCATION) AS Expr1 FROM t_location INNER JOIN t_asset_master ON t_location.LOCATION_PHY_ID = t_asset_master.LOCATION WHERE (((t_location.CITY)=[Forms]![MasterQueryGenerator]![CityList]));
I also want multi-select so that is you can un-select all and get the results for all cities.
Here is my half thought approach.
Code:
Private Sub CityList_AfterUpdate() 'Dim LocQryStr As String 'Dim r As Integer 'Dim ctl9 As Control 'LocQryStr = "SELECT DISTINCT (t_location.LOCATION) " & _
[Code] ...
I intended to have the variable LocQryStr as the row source but I abandoned the idea of having multi-select when I saw that .Selected(I) never returned true. Its like the values aren't read in this subroutine.
i need some major direction! here's what I need to do.... i need to generate a report based on a table(no big deal). However, I need to generate a query that lists all users from the table(still no big deal). Here's where the fun comes in... I need to use that query to populate a listbox and allow multiselect on the listbox. The table data that is related to the values from the listbox that are selected are NOT to be showed on the report. So I imagine I need to create a query where the criteria is <>the value(s) in the listbox. So I basically have two problems... 1. getting the value(s) from the listbox (the only way i seem to be able to get a value from the listbox is if I do not allow multiple selections--i'm obviously overlooking something) 2. using the value(s) as criteria to limit my query results(not sure how i would do this, since it's more than one value--possibly an array??)
I guess i could also do it the opposite way, too(select users that you want)...but either way, i have no idea how to go about it. Please help~I'm going crazy!!
