Modules & VBA :: EOF Is Not Being Recognized In Recordset?
Mar 18, 2014
I have a form with a query set up as the record source. If there are records in this query, the form will display. When the user clicks a button, if there is another record in this query, the form displays the next record. When it gets to the EOF, it should close this form, but EOF is not being recognized (I run debug and it says it's false when the button is clicked)? I get run-time error '3201' after I click the button twice.
I know for a fact that there are 2 records in this query. So once I click the button on the 2nd record, the form should close.
Code:
Private Sub SelectTblMyMedButton_Click()
Dim db As DAO.Database
Dim rs As DAO.Recordset
Set db = CurrentDb()
Set rs = db.OpenRecordset("qryMedDataSelect", dbOpenDynaset)
a) Open a word document from MS access / VBA, b) Connect to data from a query c) mailmerge it d) Save it as a new document containing mailemerged letters.
The code does open the required document as I can see it open.
I put a message box to recheck that filename/path is what I mean, and to to know till which line the code runs. Code runs till that point and that word doc is seen open. I get the error message before
Then I get error message.
I was fooling around and was getting message " This command is not available because no document is open" I tried to remove few lines thinking redundancy. Before getting the message, I was also getting the error trapping message "No documents opened."
Now I am getting different message.
I am getting message " The remote Server Machine does not Exist or is unavailable"
Following is the code I have written.
Dim xlApp As Object Set xlApp = CreateObject("word.Application")
Special situation: The SQL Server Linked Server across the country is linked to a Read Only Oracle DB. This data pull works perfectly and populates the Subform.
The problem is that Oracle can take 3 to 6 seconds to retrieve the single record depending on the network traffic through a small pipe.
The code below shows the RecordSource for the SubForm. clicking on a list box supplies the value. Then 3 to 6 seconds later, the subform populates.
The actual Recordset for this Recordsource is needed to conduct Validation on each field. Normally this would be on SQL Server, I might just create a Recordset Oject and run this SQL statement again in 1 milisecond. In this case, it will probably take an additional 3 to 6 seconds. Avoiding another lengthy round-trip to Oracle would be prefered.
Goal: How does one grab, clone, or other wise reference the existing recordset for the SubForm?
Note: Immediate Window - One single field can be returned quickly
There are 48 fields that need validation - is there a way to reference the entire recordset?
Immediate Window during Break Mode: ? me.fsubsrNavSHLBHL("NavSH_QQ") NESE ' this is the correct value for the current recordsource
Set a breakpoint right after the line: fsubsrNavSHLBHL.Form.RecordSource = "Select * from vsrNavigatorSHLBHL where Well_ID =" & txtNavWellID.Value
Immediate Window: ? me.fsubsrNavSHLBHL.Form.RecordSource Select * from vsrNavigatorSHLBHL where Well_ID =91229
I want to write a email where there are 2 or 3 different ordernumbers for same email, i want to include the email in the mail part as single column table. how to do it? also can i use result of one recordset for other recordset?
About three weeks ago, my work computer crash hardcore. Windows (2000 ver) had many corrupt files in the Windows Directory and in the Registry. Because of that, IT gave me an up to date computer running Widows XP. I am still running the same version of Office (2003 Pro).
I think because I have a new machine and a different platform, I am now have issues with trying to administer the permission rights. MS Access is not recognizing me as Admin and/or Creator of the db, therefore I am not able to modify permission rights....... :eek:
Does anyone know how make this db recognize that I am the Creator of it?
I changed a form in the design master that had nothing to do with the date or a date field. Everything appeared fine.
Now I updated the replicas, and an error is happening on all replicas as well as the design master. Any reference to Date() or Now() causes errors.
If it's a field on a form it has an #Name error. If Date() or Now() is on a report, a popup to enter parameters appear for the date. This database with these codes have been working for years.
Is it safe to say it's no longer recognizing Date() or Now() ?
I'm experiencing an interesting problem with a database I have been working on. For some reason, when I tried to enforce referential integrity between two fields, whose values should have matched perfectly, I got an error that I couldn't because they didn't match. When I ran an unmatched query, I found that the numbers DID match, but for some reason Access wasn't recognizing it. Even when I type the values into the field to "correct" it, it doesn't recognize it; I have to copy and paste from the master table into the child table in order for the values to be recognized as matching.
The same thing happens when I try to filter or query the table; if I type the value, it says no records are found, when I copy and paste, or select from the combo box, it works.
ANY IDEAS?? this is really weird and it's happening on multiple computers so it's not just one system. And, this has never happened before with this file or any other that I've worked on...
I use access 2000 (french) and runtime access 2000 (english) on XP. After upgrading workstations with last microsoft security patchs, the use of left, mid or right functions in queries doesn't work anymore. We know now that the patch acted on MDAC, is it the answer? I don't know how to make it work.
A6 = Year 01 = Month 03 = Day 0730 = Time (not worried about that part)
ApptDate: IIf([abap_030] Is Null,"",Format(DateSerial(Val(Mid(Left([abap_030],6),2,1)),Val(Mid(Left([abap_030],6),3,2)),Val(Right(Left([abap_030],6),2))),"dd-mmm-yy"))
I get the date to "Look" the way I want, but Access does not seem to recognize the formatting as it will not sort properly?
I have created a form and changed it's pop property to Yes and named the for to 'rtchange' however vba code editor is not recognizing this form in any code i try and reference it. it's giving an error variable not defined??
I have a query that I referenced it to a combo box in a form. In my form I created a combo box which has a list of VendorName and I want my query to opens a VendorName report based on whatever chooses in the combo box so that I use the combo box name in the criteria of the VendorName in my query. Somehow I get an error which says "The Microsoft Office Access database does not organize "[Forms]![Form1]![Vendor_Name]" as a valid field name or expression".
I have learned the basic looping technique for going through a record set from the following link. I need to know if my logic is on the right track. URL...
My question is a followup to a thread that was opened on this forum: URL....I want to do the following:
1) Use record set looping technique to fix a variety of incorrect naming conventions to a standard format 2) Update the table (or create a new table) from the updated record set values. (Is my logic going to update the table selected in the code I used to dimension the record set or will I need to do something else to make the changes available for other tasks after record set is closed ? After the naming conventions are fixed this data will be available for excel automation that I am working on and posting questions on another thread in this forum. HAHA I'm going code BANANAS) 3) rs.fields![fleetlocation] is used so many times, how can I make this a variable (what do I dimension the variable as?) 4) Use an AND statment with an if statment (how to do this with correct syntax)
Code: sub loopandfix() on error goto errorhandler: strSQL = "tblUnionQueryResults" 'table was created from a union query but has inconsistant naming conventions for the fleet location name
I'm using Access 2003 with a frontend/backend database on a network. Several of our forms have image controls with links to a folder of JPG images, and these have worked fine for months. I have followed the recommended linking method described here (http://www.access-programmers.co.uk/forums/showthread.php?t=92837&highlight=jpg+link) and as I mentioned everything has worked fine until recently. Foolish me decided to try out Office 2007 beta for a few days but uninstalled it after a few days. Now, on my computer only back on Access 2003, whenever I try to open one of the forms that previously worked I get an error message saying "Access does not support the format of the file '....jpg. Try converting the file to BMP or GIF format". Copies of the same frontend works fine on other work stations, and I can open jpgs in Word and Excel. Or, to be even more frustrating, an embedded jpg will show up fine in my copy of the program - it's only linked jpgs that are rejected. I first repaired Office 2003, then completed unintalled and reinstalled it - same error message. 2 hours with MS tech support has been likewise futile. I'm guessing it has to be some kind of registry error, but nothing I seem to do makes a difference. Any suggestions at all will be greatly appreciated, because my next step is a complete format and clean install of everything.
I'm Italian and I started playing (I don't work on it) with access to create an Airline Simulator for MS Flight Simulator. My "program" read data imported in an Access table by a secondary program, and work on it. :cool:
One or Two of my Beta testers found this problems:
1) function "date()" is not recognized in Access 2003 and 2007. in 2003 is read as "date"; in access 2007 is read "date(". The one with Access 2007 resolved the problem reinstalling the Office Suite 3 times. The third was working. nothing else changed. :mad:
2) Access request the OFFOWC.DLL, in an Access2003 version. But only one user... and that .dll is from Access 2007!! :confused:
I wrote the database in Access 2007 and in Access 2003, the file is obviosly Access 2003 format.
I attach it here, for someone that wanna try if he has the same problem. PS due to size of the file, it's a zip containing a .rar file, that contains the .mdb (zip only was 660 Kb)
I maintain a grade book application that uses many queries whose results are determined by "school year". Most of these are reports and I have a combo box on the Print form for that allows the user to select the school year. The criteria field of the several queries derived by school year is:
[Forms]![Main Navigation]![Print Form]![SchoolYear] SchoolYear being the combo box control.
They work fine.
I have now added a function to export data to Excel. This is done in a VBA module and I am using a query to select data for the record set I use to write to Excel:
Set objRst = Application.CurrentDb.OpenRecordset(strQueryName)
When I hard code the school year in the query criteria field (i.e. "2012-2013") the process works fine, but if I revert the query to point to the print form field as above, I get an empty recordset.
The Excel export is executed from a control on the Print Form, so the form is open and the combo has data showing, just as it is when a report is run whose data is derived from a query.
When I execute the query from the VBA module, the query is not getting the school year selected on the Print form passed to it properly.
I am trying to open a child recordset but keep getting Error 424 "Object required".
Dim rstEmails As DAO.Recordset2, DBS As DAO.Database, rstFile As DAO.Recordset2 Set DBS = CurrentDb Set rstEmails = DBS.OpenRecordset("Beldenemails") Set rstFile = rstEmails.Fields("email").Value 'Error 424 here End Sub
Is there a possibility to use a shorter code for extracting one field from one record, than opening a recordset, getting the field, closing it and setting the recset to "Nothing" again? I'm doing this multiple times in my code and it seems a bit too much for what it's supposed to do.
Code: sql = "SELECT tblAdFlgDaten.* FROM tblAdFlgDaten WHERE (((tblAdFlgDaten.AuftrID)=" & ABAuftrID & _ ") And ((tblAdFlgDaten.Schritt)=2))" Set RSnap = dbase.OpenRecordset(sql, dbOpenSnapshot) If IsNull(RSnap.Fields(2)) Then ... ... End If RSnap.Close Set RSnap = Nothing
How does one go about removing a recordset from a ListBox?
I have a list box that I want to toggle between using a query and an ADO RecordSet to populate the values.
Once I set the listbox .RecordSet property to the ADO.Recordset, I can't remove the values displayed in the listbox when I assign a query to the .RowSource property.
I suppose I can turn the .RowSource query to an ADO Query but I am being lazy and don't want to rewrite the query as a T-SQL query.
I previously thought the list box was pulling data from the .RowSource query but I realize I was wrong.
Is it possible to create a record set from a list box?
I have two list boxes list1 (customers) the can transfer records to list2. I want to take all records from list2 and use it to open a report, using customer id as where clause in my docmd.openreport statement.
As I am moving through my code, I'd like there to be a pop-up box which asks the user to choose from a list of dates. This list of dates only resides in a filtered recordset in the background.
Once the date is chosen, then my code continues onward..I know I could make some sort of pop-up form, but I'd rather not have to go in a design all that just for a list of dates...
1) Is there such a thing as a dropdown list on a Input box?
and even if there isn't...
2) Is there a way I can bind the column in a recordset to a dropdown list?
Im still struggling with working with recordsets.What i want to achieve is to loop through a continuous form recordset, Using the OrderDetailFK from the record set and the OrderDetailPK in the OrderDetail Table
Looking at the Status FK in the OrderDetail Table. IF the OrderDetail Status = 2 then i want to make the textbox enable property = False. I have made the bellow SQL string which is placing all the criteria i just need to link it into a recordset?
Code: mySQL = "SELECT [StatusFK] FROM [tblOrderDetail] WHERE [OrderDetailPK] = " & rst!OrderDetailFK & " AND [StatusFK] = 2 "";"""
I am in the middle of creating a function that populates two unbound text boxes on a form and then uses those unbound textboxes in a query (Total of 3 unbound text boxes - 2 are populated from this function). The saved query object is working fine when I manually execute it (after the unbound text boxes have been populated). However, when I go to set the same query to a recordset I am getting the "Too Few Parameters. Expected 3." error message.
In the saved query I used the build function to use the unbound text boxes as part of the where clause. Below is the code I am trying to execute:
PHP Code:
Public Function Test()Dim db As DAO.DatabaseSet db = CurrentDbDim rst As DAO.Recordset Dim DtBegin As String''FInd the Begin dtstBegin = DateAdd("q", -1, DateSerial(Year(Date), (DatePart("q", Date) - 1) * 3 + 1, 1)) Dim DtEnd As String''find the end dateDtEnd = DateAdd("Q", DateDiff("Q", 0, Date) - 1, 0)
[Code] ......
The unbound text boxes are populated before the query is set to the recordset.
I'm trying to assign the result of an SQL query to a variable using VBA in Access. The query returns a value but the variable which it is assigned to has a value of Nothing. Here is the code snippet:
Dim queryReturnID As String queryReturnID = "select dbo_tbl_SupplierReturn.ReturnID from dbo_tbl_SupplierReturn" & _ " where SupplierID = " & lstPOHdr.Column(1) Debug.Print queryReturnID Dim RecordSet1 As DAO.RecordSet Set RecordSet1 = CurrentDb.OpenRecordset(queryReturnID)
