Modules & VBA :: Error Msg On Form With Form Closing?
Nov 13, 2014
I got an error msg on form with closing. I have a main form (SalesReturnOrDamaged) and subform (SalesReturnOrDamagedSubform).
i have used a VBA code on main form Close Command button as per shown in Code Tag. But that is not working and shown an error msg as per screenshot. how to change that VBA code for empty form close without save the record?
Code:
Private Sub Close_Click()
On Error GoTo Err_Close_Click
If Forms![SalesReturnOrDamaged]![SalesReturnOrDamagedSubform].Form![ItemCode].Value = "" Then
Forms![SalesReturnOrDamaged]![SalesReturnOrDamagedSubform].Form![Product].Value = ""
Forms![SalesReturnOrDamaged]![SalesReturnOrDamagedSubform].Form![MRP].Value = 0 Or ""
I have a form that has some fields with validation rules, which are Not Is Null. I have a private function to validate records (here is a snipet)
Code: Private Function ValidateRecord() As Boolean ValidateRecord = False Select Case Outcome Case "Interpretation" If IsNull(Me.[Date Provided]) Then MsgBox [Date Provided].ValidationText Exit Function End If
[code]...
The form has a save and close button. I was wondering if there was a way to keep the form from closing if those fields are null. Right now, you click the button, the validation text pops up (it pops up twice too), and then the form closes.
I thought about maybe having the (If...Then, Inputbox)code in the Form_BeforeUpdate instead. If I do that, is there a way to do that for date textboxes and comboboxes where you choose the value instead of typing it?
I currently have 3 forms open and when I call a specific function and it gets to this line below it goes to the on close of 1 of my open forms closes that form before it opens the selected form in code (below) in design mode. It doesn't close all my forms....why does it do this?
Private Sub Command79_Click() On Error GoTo Err_Command79_Click 'the following code is supposed to warn the user if there is no STOP filling time for each START filling time before the main form is closed
If [Text344] > #12:00:01 AM# Then If [Text365] >= [Text344] Then
I have a form to add a record to a table. How can I give the user a way to close this form without saving the just created record.
I tried
If me.dirty then DoCmd.RunCommand acCmdDeleteRecord endif
This works, but gives a messagebox in return to confirm the command, and I don't want that. And I try to avoid sendkeys. I also don't want to change the options of access.
I've got this form called mainmenu and inside this form I've got this code to prevent it from being closed.
Code: Private Sub Form_Unload(Cancel As Integer) Cancel = True End Sub
Now then, when I try to switch to design view in this form it doesn't let me because of this code. Is there anyway to tweak this code so that I can get into design view without having to keep disabling it?
I am using Access 2010 - Version 14.0.61.29.5000 (32-bit)
I am building a custom Export Wizard to export data to Excel using the Report Wizard for the basic ideas.
All I am trying to do is have a [Back] button on a form to open another form and close the current form.
Private Sub cmdBack_Click() DoCmd.OpenForm "frm_ExportWizardPage2", , , , , , Nz(Me.OpenArgs) DoCmd.Close acForm, "frm_ExportWizardPage3" End Sub
The new form is opening but then the current form is not closing. All forms are the same size, shape and positioned centrally although this should not make any difference.
Could this be anything to do with which form has the focus when I open the new form?
I have a bound form with a few fields. I would like to run a sub after some of these fields are modified, but not others. I would like it to run only once, after user finishes his work on the form.
When using the Unload event - the form on the form is not there anymore (or did I get something wrong?).
Is there a way to trap Data on form just before the form closes?
I've added a message box to what is basically a standard simple to use access control, "closeForm", I'm a newbie working on learning access vb. I'm guessing my code if fudged. Any help is greatly appreciated.
Private Sub Close_Click() On Error GoTo Err_Close_Click Dim Answer As Integer Answer = MsgBox("Press Ok to Close, Cancel to Continue.", vbOKCancel + vbQuestion, "Exit Data Entry?") If vbOK Then DoCmd.Close
this has to be simple but i can't get it to work...
i have a selection form (frmSelection) with a combo box...the user makes a selection from the combo box and based on that selection another form opens when they click next...i have a Select Case under cmdNext_Click()..here's a sample of what that looks like: Select Case cboVioCat.Value
Case 1 ' loads frm_vw_lab_all_facility frm_Name = "frm_vw_lab_all_facility" DoCmd.OpenForm frm_Name, acNormal Case 2 ' loads frm_vw_lab_all_other frm_Name = "frm_vw_lab_all_other" DoCmd.OpenForm frm_Name, acNormal Case Else strMsg = "Please make a selection from the list" MsgBox strMsg, vbInformation, "Oops!"
End Select now what i'd like to happen is say the user selects the first option "Case 1", the new form opens...this works perfectly...but what i'd also like to happen is frmSelection to close - it is no longer needed...i have added DoCmd.Close within each Case and after the End Select but none work...it appears as though it is closing the new form, frm_vw_lab_all_facility...what am i missing here?
This is related to some advice I received some time ago <a href="http://www.access-programmers.co.uk/forums/showthread.php?t=64818">here<a>
I am runnign some code, it performs some applications, then, if a Count Field is greater than 1, a form opens as a dialog, displaying some information:
Dim A As String A = "NewForm" If Me.[Count] > 0 Then DoCmd.OpenForm A, acNormal, , , , acDialog End If If Me.Continue = "No" Then Exit Sub
End If
The new form opens, and you can either view it, and click continue, which will run the rest of the code, or you can click quit, which updates Me.Continue to "No", and then it exits.
The problem is, when it exits the Sub, it doesn't really stop the code, it just leaves things kind of hanging. When I try to run the code again, I get:
3321 - The database engine could not lock the table 'NewTable' becuase it is already in use by another person or process.
Another symptom - The original form where I click to start running the code, has two date fields. Normally, when this form opens, they are blank, but when I exit the sub, as above, the previous dates I entered are still sitting there.
When a form is open you can also see on the task bar that the form is open If the user right clicks on the form(on the task bar ) they get the following options minimize , maximise , close.
Does any one know how I can stop the user selecting Close please ?
when i close the form all the fileds in the forms gets saved to the table. i want it should pop up before closing to save it or not. i have a button on the form to save the fields in the table. which has code
I have found that when closing a form and changes have been made to the fields, these changes will be saved.
I would like to know if there it is posible to only save the changes when a command button is pressed and not when if you close the form any other way.
Not sure what to call this "phenomenon" so haven't had any luck searching for an answer.
I have a form (form1) that has a close button with code behind it. When the button is clicked, it takes a few seconds for the code to run. When form1 closes, all is well up until: There is another form (form2) that is open behind form1. When form1 closes, part of it is still visible over form2.
I'm looking for a way to cancel the closing of a form/app. I added a button asking if the user is sure they wish to exit, and am having difficulty finding the correct code to cancel the close event.Here is my codeDim ians As Integer ians = MsgBox("Are you sure you wish to exit?", vbYesNo, "Exit App") If ians = vbNo Then DoCmd.CancelEvent DoCmd.OpenForm "orderlist", acNormal Exit Sub End IfCan help or send me down the right path?Thanks
When closing a form, I want my system to prompt: "Close without saving?". If yes, I want to continue the closing-proces, but when "no" is pressed, I want to just close the MsgBox-window and of course keep all the data-entries...
If MsgBox("Close without saving?", vbYesNo, "Close?") = vbNo Then XXXXXXX
I am getting an error msg when i get to the line "Set frm = Forms(vFormname).Form". Error 2450, cannot find the referenced form...
'Code:
Dim frm as form ' Check If saved dynamic field exists SqlStr = "Select ReportListID, DynFieldName, DynCalc, FormName, UserName From DynFields Where UserName = '" & GBL_Username & "' AND ReportListID = " & projectid Set rs = db.OpenRecordset(SqlStr, dbOpenDynaset, dbSeeChanges) If rs.EOF = True And rs.BOF = True Then GoTo Exit_DynamicFieldCreator
I'm creating a DB that includes a form that "Customers" will fill out. The form (CustomerForm) has text boxs that must be completed. I'm trying to figure out how to make sure all text boxes are filled out. I have already created a Input Mask and selected Required in the "Customer" Table. There is also a Username text box I would like to have validated that is is not already being used and two password text boxes I would like to have validate against one another to ensure it was created correctly. Once all text boxes are properly filled out I would like the Button to Save customer data, close CustomerForm and Open ShoppingCart. This is the code I have created:
Code: Option Compare Database Private Sub Log_In_Click() If IsNull(Me.CustomerFName) Then MsgBox "Please Enter First Name", vbInformation, "First Name Required" Me.CustomerLName.SetFocus
I have a form for inputting products into a table called "products". On this form is a combo box which lists the Suppliers. This list is generated by a Table called "suppliers".
If the supplier has not alredy been entered into the supplier table then it is not listed in the combo box list. I have added a button to open a supplier entry form to add the supplier to the supplier table. Once the new supplier is entered and the supplier entry form closed, the new entry does not show in the combo box list unless you close the product form and reopen it.
How do I refresh the combo box list without closing the form it is in and reopening it.
I have been surfing these forums for about 3 hours and I cannot find the answer to my question. So, if this is already answered in another post I apologize in advance...
Here is my problem. I need to have a "Login" form to start this db that I am working on. I have found a post that I referred to for the code with some editing to make it work for me.... The code is....
Private Sub Login_Click() On Error GoTo errorfix Set db = CurrentDb Set r = db.OpenRecordset("tblBouncers")
Do Until r.EOF If BName = r![Bouncer] And BPW = r![BPassword] And r![Active] = 1 Then DoCmd.OpenForm "frmMain", acNormal GoTo exit_sub Else r.MoveNext End If Loop
Most everything works fine. If my username and password get qualified, the main form opens, or if my username and password are wrong, I get the appropriate message and it clears the boxes like I want it to. However, my problem is that I cannot, no matter how hard I play with this, get it to close the Login form, without encountering an error.
Yes, I know that the code above doesn't have anything telling it to close the form, because no matter where I put the "DoCmd.Close acform, "frmBLogin" "I keep getting an error message "This action can't be carried out while processing a form or report event."
What am I missing, and where do I put it? I have tried various locations for setting db and r to nothing then closing the form (based on advice from other posts I have read), but keep getting the same error, or worse (worse being can't close the error and have to end the process through task manager).
Will someone please direct me in the right direction? You can even go so far as to tell me my code is completely wrong... This is my first attempt at loops so you won't hurt my feelings.
