Modules & VBA :: Exporting Data To Excel Truncates Long Text Form
Jun 13, 2014
I'm having an issue where when I attempt to export data from an Access database to an excel spreadsheet using VBA it truncates any field longer than 255 characters to the 255 limit. I'm using
Code:
DoCmd.TransferSpreadsheet acExport, acSpreadsheetTypeExcel12, "tableName", "FilePath", True, ""
to export it (obviously with the table name and filepath filled in) but for some reason I cannot get it to export the entirety of the field to excel. I've been doing some digging on various forums around the internet and it seems as though it may be possible to split it into various excel cells then use automation to concatenate the cells. But considering this field I am trying to get not truncated can be up to 40,000 characters theoretically, it doesn't make sense to do it that way.Do you need more information from me? I'm somewhat new to both Access and VBA.
View Replies
ADVERTISEMENT
Jan 10, 2005
When I export a report to Excel, a memmo field is truncated to 256 characters. If I export the query behind the report, the memmo field is exported correctly. Is there a way to export an Access 2003 report to Excel and maintain all of the data and report formating in memmo fields?
View 1 Replies
View Related
Nov 25, 2013
Two Solutions to address moving an Access Memo field into Excel when string has > 255 characters. All my 'reports' use Excel VBA (Access Reports are not used). The Excel reports can have 40,000 records. Speed to create the report can be an issue.
Describing 2 Solutions below to address moving Access memo fields with > 255 characters into Excel.After running this code
Code:
720 ObjXL.DisplayAlerts = False
ObjXL.Columns("X:X").Select
ObjXL.Selection.NumberFormat = "@" ' set column to Text
730 ObjXL.Worksheets(intWorksheetNum).Cells(intRowPos, 1).CopyFromRecordset rsNutsAndBolts
The Comments column are limited to 255 characters. So, the CopyFromRecordset (recordsetvariable) creates the 255 character limitation.
The reason? The 255 character limit is because CopyFromRecordset sutomatically uses the Characters property of the Range object. The 255 limit would not be there if the Cell Value property is used to assign the string to that cell.
Dim sRx as String ' String Prescription
sRx = "String with > 255 characters ... you fill in the rest ...."
Cells(1, 1).Value = sRx ' Cell's Value property assignment can be very large
Solution 1:
The record set is still in memory. By using a loop, a cursor can start with record 1 (memo column) and assign that value to the Excel row / column using the .value as shown above. Basically, this moves one memo field at a time, record by record. e.g. Read First recordset in Access, copy to variable, assign value to Excel row/column Then move next on each Access and Excel.
Solution 2:
An Access Memo filed [RxNotes] can have up to 750 characters. Cut it apart into three new fields that end up out in the very right Excel columns AA, AB, AC.
Note1=Mid([RxNotes],1,250)
Note2=Mid([RxNotes],251,250)
Note3=Mid([RxNotes],501,250)
Then using Excel Object - Concat the cells back cell by cell...
X2=CONCATENATE(AA2,AB2,AC2))
Then delete the columns AA, AB, AC to hide the evidence..Neither solution is all that elequent. Read about this and by golly, it made a difference
ConcatComments = "'" & CommentString
Before using the CopyFromRecordset be sure to add a single quote in front of the large string.
Turns out the interface between Access and Excel look for this to prepare Excel immediately for the string to be a string, not something else. Some of my strings had weird print characters that kind of looked like Japenese characters. It seemed random, it always happened if the string was 255 or more characters (ramdonly, not always). The single quote doesn't show up in Excel, but got rid of all the noise.
View 5 Replies
View Related
Sep 17, 2013
I a trying to search some product from a search button and two combo boxes text values ,and on serch the vba code is :
Code:
Private Sub Command4_Click()
Dim db As DAO.Database
Dim rs As DAO.Recordset
Dim varRecords As Variant
[code]...
I just dont know,the fuile is created on click of button but with headers only,dtaa is not coming but wheni debug ,in immediate window,data is oming but just not coming in excel file.
View 4 Replies
View Related
Apr 29, 2014
I am able to use DoCmd.TransferSpreadsheet to export data from Access to Excel, however, I want to be able transfer data into a specific sheet within an Excel template (e.g. Tasking.xls), that will then save under a different name (e.g. Tasking 20140429.xls). The other sheets within the Excel template contain pivots etc. so they will need updating during this process. The Excel template should just close down and remain in its original format.
This process will occur once a week so the dates will have to change accordingly.
View 7 Replies
View Related
Sep 22, 2013
In Access i can create different contracts with different running time.
I have contracts with a running time of 4 years, 6years, 8 years, 10 years and 12 years.
I have for each contract a different Excel file.
The users can choose via an Inputbox, which contract he wants to Export in Excel. In the Inputbox he enters the SuWID.
Now i want that the the Excel file with the Special running time get opened.
4 years ----> ("C:UsersGRIMBENDesktop4years.xlsm")
6 years ----> ("C:UsersGRIMBENDesktop6years.xlsm")
and so on.
Code:
Dim xlApp As Object 'Excel.Application
Dim xlBook As Object 'Excel.Workbook
Dim xlSheet As Object 'Excel.Worksheet
Dim rst As DAO.Recordset, SuWID As Long, tmpStr As String
[Code] ....
View 1 Replies
View Related
Sep 12, 2013
I Export data by ID from Access to Excel.
Is it possible that two mgsbox will Show up, where the user can put in the timeperiod.
The time period would be the starting day of the contract.
It's called inception_date
Code:
Private Sub Befehl1_Click()
Dim xlApp As Object 'Excel.Application
Dim xlBook As Object 'Excel.Workbook
Dim xlSheet As Object 'Excel.Worksheet
Dim rstID As DAO.Recordset, tmpStr As String
Dim rstGr As DAO.Recordset, strSQL As String
[Code] ....
View 2 Replies
View Related
Sep 18, 2012
When equipment is returned to our company the details are put into an access database, then the same details are filled into a excel sheet to be printed and handed around for other depments to fill in by hand then sign. I have been asked to see if it is possible to alter the database so that the appropriate parts of the excel sheet could be filled in automatically. You can see an example below, its only the sales section that comes from the database the rest is filled in by hand.
Is it possible to setup a query that would ask for say the RER number and serial number to find the correct record then export the data to fill in the right cells; or is it easier for me to try and recreate the excell sheet as an access report and have it filled in that way.
View 1 Replies
View Related
Mar 4, 2015
i have a form and i want to export it to excel file the form will be updated someties and the data will be changed here is my code, but there is a problem with it
Code:
Private Sub Command0_Click()
Dim xlApp As Object
Dim xlBook As Object
Dim rs As ADODB.Recordset
Dim sql As String
Dim i As Integer
Dim Conn1 As ADODB.Connection
Dim Cmd1 As ADODB.Command
[code]....
View 1 Replies
View Related
Nov 7, 2007
Hi folks.
I'm new member this site.I have a problem my access project and I have request help you.
My problem. My project has two table and two form .Order (Main Table&Main Form) and Order_Subform (Sub Table&Sub Form) When i click 'Send to Excel' button in Order form it's sending data to Excel file Order.xls but it's only sending one line in order_subform to Excel Order.xls. it is not sending other line. I hope, could I able to explain my concern
Kind Regards.
View 1 Replies
View Related
May 9, 2014
I am trying to export certain values which are in combo box of MS Access to excel sheet. But what's happening is its populating ID of the field instead of Field Name.
View 11 Replies
View Related
Mar 14, 2012
How to remove unwrap text after exporting report from Access to Excel?
View 11 Replies
View Related
Mar 10, 2014
I have encountered an issue when I was inserting a string (with newlines about 176 characters) into access table. This field in access has the data type TEXT and it was truncated after the insertion. It is strange because I have three other fields with the same format and no truncation at all. May I know what could be the reason and how/what is the recommend data type for storing long text?
View 3 Replies
View Related
Oct 9, 2013
exporting an Access query to Excel using VBA.When I run the code, the Excel workbook that is created defaults to the name of the query.I use naming conventions for my queries so the tab of the Excel spreadsheet is named "qryProviderAuditExport". I would like to name it "Provider Report". Is there a way to do this.It is one spreadsheet that is created when the code is run and there is only one tab to worry about. Here is my code so far:
Dim file_name As String
file_name = CirrentProject.Path & "Submitter_Audit_Report.xls"
DoCmd.OutputTo acOutputQuery, "qryProviderAuditExport", acFormatXLS, file_name, True
If possible, I would like to do this during the export without having the code open the Excel spreadsheet and doing it after the fact.
View 4 Replies
View Related
Feb 24, 2015
how i can calculate totals after i export some data from access to excel (using CopyFromRecordset). I'd like to put the total the row after the last row of data similar to how one use to AutoSum in excel.
View 4 Replies
View Related
Jul 13, 2005
Hi all,
I am using Access 97 & Excel 97 for this problem. I have a Access query which takes the contents of three tables and exports them to Excel. However, the query has now reach 69000+ records and increases by about 1000+ records ever month. So what I need to do is create as many WORKSHEETS within a single Excel WORKBOOK as necessary to accomodate all of my Access data. I have written a piece of code which will create seperate WORKBOOKS for each 65000+ of records but then what I want to do is code the almagamation of these WORKBOOKS into 1.
In short, after the first WORKBOOK is created I use code to make that the active WORKBOOK and then I want to import into that the other WORKSHEETS in the other WORKBOOKS.
I am using the folowing DIM's:
Dim X As New Excel.Application
Dim WkBook As Excel.WorkBook
Dim WkSheet As Integer
Dim ExcelSheet As Excel.Worksheet
ExcelSheet therefore is the current WORKSHEET within the Excel spreadsheet I want to import into.
Any advice on the command to perform a transfer of WORKSHEET data between Excel WORKBOOKS?
Regards,
DALIEN51
View 1 Replies
View Related
Sep 15, 2004
when i analyze my report in Excel, none of the data labels in my report header are copied across can i set this up so that they do.
Andy
View 1 Replies
View Related
Sep 6, 2012
I am trying to export my access table in excel.
I have the following code which gives an error when i try to implement it.
Private Sub Command22_Click()
Dim strExcelFile As String
Dim strWorksheet As String
Dim strDB As String
Dim strTable As String
Dim objDB As Database
[Code] .....
View 3 Replies
View Related
Sep 18, 2014
I am trying to export a query to an pre-existing spreadsheet. I am new to VBA and when I implement the following code nothing happened.
Option Compare Database
Public Function Sheet(strTQName As String, strSheetName As String)
Dim rst As DAO.Recordset
Dim ApXL As Object
Dim xlWBk As Object
[Code].....
View 5 Replies
View Related
Jan 13, 2014
I am exporting from access to excel using the code below, but I'd like to edit the code so that it exports to excel for each original value in column A. For example, if column A contains the values "Type A", "Type B" and "Type C" then I'd like to export/save three different excel files (one for "Type A", one for "Type B" and one for "Type C"). If "Type A" appears in column A seven times then I'd want to export all seven rows for columns A through E.
Code:
Private Sub ExportToExcel_Click()
'Declaration of variables for file path
Dim CurrentFolder As String
Dim FileName As String
Dim CurrentCycle As String
'Initializing
CurrentCycle = Format(Date, "yyyymm")
FileName = SVCnumber1 & "Output.xls"
[code]...
View 14 Replies
View Related
Nov 6, 2013
I have got the following code
On Error GoTo ErrorHandler
Dim exApp As Excel.Application
Dim exDoc As Excel.Workbook
Dim exSheet As Excel.Worksheet
Dim Dateiname As String
Dim SQL As String
[Code] ....
I'll get the following error:
error message 1004: can not give a sheet, the same name of the sheet
View 7 Replies
View Related
Jan 30, 2014
I am looking to export my listbox values to a single workbook BUT a new sheet is created per export. There are 6 listboxes in total and I already have the code to export a single listbox but if I try to use this code its going to overwrite the csv each time .
Code:
Dim i As Integer
Dim n As Integer
Dim strLine As String
Set fs = CreateObject("Scripting.FileSystemObject")
Set a = fs.CreateTextFile("D:DatabaseHomeExportCombinedHrs.csv", True)
[Code] ....
View 6 Replies
View Related
Dec 12, 2007
I created an access page and now I am being asked if the data from the page can be exported to Excel. Is there any way that this can done.
View 2 Replies
View Related
Mar 9, 2005
Hi guys, this might be a quickie, I did a quick search but couldn't find anything :/
Basically my database creates a table which some people would rather analyse within excel because they're not comfortable with access. I can get the table exporting to an xls file no problem, howeevr what I would like is for the database to export the file and open the file in excel at the same time so the user doesn't need to open up excel and find the file etc...
Any ideas??
View 2 Replies
View Related
Jun 25, 2014
Any definitive way of exporting a query to an Excel file and then saving it as a new file without saving over the original.
I've tried to remove any confidential info from the code below so it's not exactly the same.
Code:
Dim XLApp As Excel.Application
Dim XLSheet As Excel.Worksheet
Dim tmpRS As DAO.Recordset
Dim strFolder as String
strFolder = ("C:Profiles"& [Name] & "")
[Code] ....
The error seems to be with the SQL statement although that may just be the first error that it got to. I read that you can't refer to a Query if it has a criteria and that you have to write the SQL directly into the code.
View 13 Replies
View Related
Jul 12, 2005
Hello all,
I have always been wondering why this happens, and now I have a problem with it.
When I export a Table/Query from Access to Excel (be it with Right CLick -> Export...or TransferSpreadsheet) there is an apostrophe character (') appended to the front of some/each cell in Excel. You cannot see it immediately, but when you click on the cell, there is this character. WHY? Does anyone else have experience in this? :confused:
Thanks in advance.
View 3 Replies
View Related