I have a field which contains various text including an email address which i need to extract.
My research says that I need to use a regex code but dont know how to get that into Access.
I have attached an example of the file i'm importing into Access.
I am trying to find a way to extract an email from a large text file that is an output from our email system. I would like to be able to extract the email address using a query or collection of queries. I have been able to extract all of the text that contains the @ symbol. From their I created a query expression:
Mid([field1],InStrRev([field1]," ")) that captures some but not everything I need.
I am currently using vb code to send an email in Access on the click of a button. I want the database user to be able to enter the recipient in a text box [ToEmail] which is on form [GroupStockProfiler]. However, I'm unsure how to put this into my code. I currently have the following which doesn't work (unless I put a specific email after 'To'):
Private Sub Command414_Click()
Const cdoSendUsingPickup = 1
Const cdoSendUsingPort = 2
Const cdoAnonymous = 0
[code]...
Is it possible to send an email after pressing a button to an email address which is within a field? If so where should I start?
View 6 Replies View RelatedI can already send emails out as PDF files when an email address exists, however, I'm trying to validate whether or not an email address does actually exist. My problem is, there are four possible locations where an email address could be: MainEmail or Contact1Email or Contact2Email or Email (the last one - Email - is in a separate table).
Four text boxes exist on the form that is being actioned (the form is based on a query to extract the relevant information) and are available to test for an email address being present. What I'm struggling with is ensuring that the 'To' box in Outlook always gets populated or Outlook chucks a hissy fit. I have been trying various IF Then Else and Do Loop plus a myriad of other ways but none are reliable, especially if no email address is present which can be the case.
My situation is that , I have a sub for sending an email to a single client on the current form. Using a record set works fine, I now wish to have
.Cc email address which is not part of the Record set ." its to the department head". strEmailAddress = rst![clientEmail] & " ;" & somebody@ntlworld.com
My question is can I type the somebody email address as indicated in red in the above line? to enable the email to go to both addressees .
set DoCmd.SendObject , , acFormatRTF, clientEmail, _ , , strSubject, strEMailMsg, False, False?
I would prefer to use the Do Cmd SendObject is this is achievable
I am trying to loop through a query results to extract email addresses from a query result.
I have the following code
NameCriteria = Forms![MainMenu]![tbl_Course_Details]![Course_Name].Value
DateCriteria = Forms![MainMenu]![tbl_Course_Details]![Course Date].Value
Dim db As DAO.Database
Dim rs As DAO.Recordset
Dim sqlStr As String
[Code] .....
If i run this in access as a query then it returns results but when i run in there then it says no current Record and i cant work out why?
Someone on another post said that sql uses US date format so i tried converting to us date and still no results?
I'm trying to see if can search outlook exchange from access vba to get email address (using windows user name) .
View 1 Replies View RelatedI have a table that holds company information for the user - eg farm name, company name, manager, phone number and email address etc. Its simply used to provide headers for reports, so that the same generic database can be used on several farms. There is only one record in this table tblfarmdetails.The second table tblorder is for orders and receipts - I currently have code that allows the user to send an order request by email to the manager, and to also send notice of receipt of goods through to the manager. I would like the code to get the email address from the unrelated table.Can I reference this field in the vba?
Private Sub cmdemailorder_Click()
Dim orderdate As String
Dim stafford As String
Dim item As String
Dim itemamnt As String
[code]....
I have vba code set up to automate a query output to email with outlook. I am having issues with the "TO" field. I have tried different types of code, such as the following:
1) MyMail.To = MailList.Fields("EmailAddress")
2) MyMail.To = MailList.Fields("EmailAddress") & ";"
Both of these work, but the issue I am having is the "TO" field in the outlook message looks like this:
admin@blahblah#mailto:admin@blahblah#
Why my code is adding the email address twice, I need to get rid of the #mailto:admin@blahblah# but I do not know how or why it keeps adding that end part.
One of my clients has asked me to look at building a way to check if the email addresses they are capturing in my CRM are valid. He want's to go beyond checking for no "@" etc.
From what I've seen, it looks like a reverse DNS check (might be totally wrong) is the way to go. IE: check if the email is valid. I've see a few tools online that can do it one by one (which I could parse to if I had to) - but ideally I'd like to be able to run this from a VBA script.
I have a form where the user puts in a email address, eg test @ myserver.net
So the link opens a new mail it has to be prefixed by mailto:
How can I automatically replace the address the user enters with the format mailto:test@myserver.net
I'm using an unbound text box and a command button to filter a list of contacts on a continuous form. The continuous form has a query for the record source and the list ends up showing only what is in the strWhere filter
Me.Filter = strWhere
Me.FilterOn = True
Is there a way to have Access 2003 take this filtered list and populate the To: field in Outlook or whatever the default mail client is? Each email needs to be deliminated by ";"
I have a form bound to a table which stores contact info for a person. I have two controls that are email_address and website_address. I set them both as hyperlinks.
So now when the user clicks on the email_address Outlook opens a new message with an email_address in the To field. (I had to use a function found on this forum to replace the "htttp" with "mailto" on AfterUpdate event in order for this to work properly.) However, now trying to add some other features to my DB I ran into problems listed below. I wonder if I should have rather left that control as Text instead of Hyperlink, and use the DoCmd.SendObject on doubleclick event instead of using the above solution.
How people usually store email addresses and enable emailing on click?
The problems I ran into:
1) My main form is in popup mode and therefore right click on the hyperlink does not give an option to edit the hyperlink
2) I copied a function from this forum which gathers a list of emails and sends one message to the emaillist. However, my email list instead of generating as:
email1@a.com; email2@b.com
it generates as:
email1@a.com#mailto:email1@a.com#; email2@b.com#email2@b.com#
I guess I could extract the email using vba (not sure how), but I still don't know how to solve issue number 1. So maybe it is better to siwtch the field to plain text and forget the hyperlinks?
Thanks,
Mariusz
PS. What procedure on double click would open a default browser, since I also have to deal with web addresses and thought of turning them into text controls?
I want to automate an email to include the senders email addres with some text in the body of the email.
Code:
Private Sub send_mail_Click()
Dim olApp As Object
Dim objMail As Object
On Error Resume Next 'Keep going if there is an error
Set olApp = GetObject(, "Outlook.Application") 'See if Outlook is open
[Code] ....
I have a column containing records of the timestamp of an event. I need to extract the date out of each of these records and put them in a separate table. The date and time of each record is contained within a bracket.
E.g.
ES~1~1412179200(Oct 02 00:00:00 2014)~1~ITM_W64MQMONITORLOG00~
0~0~ES~1~1412179203(Oct 02 00:00:03 2014)~1~ITM_Log_Entries~
0~0~ES~1~1412179204(Oct 02 00:00:04 2014)~1~ITM_Log_Entries~
As you can see, the number of characters of each record are different, so I am unable to do the Left$ count thingy.
Is there any other way to do it? I only need the date and time contained in the brackets.
I want to extract specific data from a text file and place it in my table.The following is an example of the data:
Display Author="All Saints" Title="On & On" Genre="Pop" Color="7693971" Tag="2"
I want to extract the following:
Where the word Author= appears to extract the data between the double quotes, so in the above case I want to extract "All Saints" excluding the double quotes.And then where Title= appears extract "On & On", again excluding the double quotes.So I would end up with data in my table looking something like this
strArtist [Author] strSong [Title] strGenre [Genre] strYear [Year]
All Saints On & On Pop
America Venture Highway Rock 1972
Amillionsons Misty Blue Pop 2002
my table is name tblMusicList, the fields are:
strArtist
strSong
strGenre
strYear
What is a email address (in a PM)
Jabez
Hi there,
I am a relative newcomer to Access, and am trying to work out if there is a way to isolate email addresses in a line of text, and delete all the text around them.
I have basically got a column which contains blocks of text and I want to extract the email addresses that are embedded within them. Does anyone know if this is possible by running queries?
Thank you in advance for any help! :confused:
Dan
Can't find anywhere else to post this so...
When I joined this forum last month, I attempted to enter my current email address and I got a message box that my email address had been banned. I tried several times to enter the correct (current) email address and each time was told that email address had been banned.
I attempted to contact 'jon@access-programmers.co.uk' on the 13th and 27th of April with no response.
As it is right now, this forum only recognizes my old email address instead of my real email address as that's the only way I could continue the join process.
Can anyone:
1. tell me why my current email address has been banned
2. help me get my correct information entered?
thanks.
The code below works for the one email address "Quality Assurance"...but I want to add more email values to SendObject command.
If I do this: stEmail = Me.Quality_Assurance_Authorizer.Column(1) And Me.Engineering_Authorizer.Column(1)..... I get a Runtime error '13' Type mismatch. Is there another way of including a series of email values into the SendObject code below? The reason I'm using the value of the column is that sometimes the value may be null if that department doesnt need to be emailed. Thanks for any help.
Private Sub cmdPCAuthSend_Click()
Dim stDocName As String
Dim stEmail As String
stDocName = "rptPCAuthReq"
stEmail = Me.Quality_Assurance_Authorizer.Column(1)
DoCmd.SendObject acSendReport, stDocName, "SnapshotFormat(*.snp)", stEmail, , , "PCA Authorization Request", "Please review this product change and authorize when appropriate."
Exit_cmdPCAuthSend_Click:
Exit Sub
End Sub
Hey all,
What is the easiest way to create a validation rule for entering email addresses i.e. making sure the @ symbol is between text.
e.g. texthere@texthere.com
Thanks in advance...
Can somebody give me the input mask for an email address?
Thanks!
I am using Access 2007. I have a text field that contains multiple e-mail addresses. The field is generated from a excel file that I download from a website the company uses. I would like to create a query or VBA code to change the e-mail address to just the employee name. The problem is the filed can have multiple e-mail address separated by a comma. I have been changing them manually using "Search - Replace", but that is getting tedious as the database is getting used more often.
View 4 Replies View RelatedI have been working on a database which is going to integrate a client database with any emails they send to me. The idea is that I will create a sub form as part of the contact information section which will show any emails that have been sent from that contact. I have a field which has the email address in the contact section and I want to link the contact to the sub form by the 'email address' and the 'from' field in the link outlook folder.
This all works great except that access links to the outlook folder and in the 'from' field, it shows the display name instead of the email address it was sent from. Is there anyway to tell it to extract the email address itself instead of the display name, or is there another way of achieving this same thing?
I'm using outlook and access 2010
I've spent about an hour searching this site for email issues but most I found we how to send. I want to take existing data and make an email address.
I have a FName field and an LName field. In my email field I want FName.LName@email.com. the @email.com will always be the ending. Also where (on gotfocus) is the best place to put this code so it autopopulates after the FName and LName are entered?
Thanks!
Rick