Modules & VBA :: Extract Variable Count Of Columns And Transpose It To Another Table

Mar 14, 2014

I wanna extract a variable count of columns and transpose it to another table.

My source table is called FC containing columns like 1 FC, 2 FC .., 12 FC

My target table is called Forecast_Quantities

Tried the following:

Code:
Public Sub TRANSPOSE()
Dim rs As DAO.Recordset
Dim rsNew As DAO.Recordset
Dim varItm As Variant
Dim I As Integer
Set rs = CurrentDb.OpenRecordset("FC")

[Code] ....

Somehow it doesn't recognize the I FC column in the table FC.

View Replies


ADVERTISEMENT

Queries :: Transpose Table Columns Into Rows

Jun 18, 2013

Is there a way to create a query that will transpose table columns into rows:

Genes Cytoband
xxxx yyyyyy
xxx yyyyyy
xxx yyyyyy
xxxxxx yyyyyy
xxxx yyyyyy
xxxxxxx yyyyyyy
xxxxxxx yyyyy
xxx yyyyyy
xxxx yyyyy
xxxxxxx yyyyyyy
xxxx yyyy
xxxxxx yyyyyy
xxxx yyyyyy
xxxxxxx yyyyyy

Is there a way to display the table in a single row separated by commas:

xxxx yyyyy, xxxx yyyyyyy, xxxxxxx yyyyyyyy, xxxxx yyyyyyy

View 11 Replies View Related

Modules & VBA :: Union All Query - Transposing Columns To Rows With Variable Columns?

Aug 8, 2013

I was able to use the UNION ALL qry. But, when I have another file (like original2) that does NOT have all the columns listed in the UNION ALL qry, I get a Parameter value box asking for the missing columns when I run the qry.

Example:

original1IDDateGroupChristianJohnnySteve 18/5/2013A1528/5/2013B338/5/2013C2348/5/2013D2358/5/2013E5

original 2IDDateGroupChristianJohnny18/6/2013A212528/6/2013B2338/6/2013C2248/6/2013D22

The UNION ALL qry includes all the possible resources ( includes all the possible column fields Christan, Johnny, and Steve).

When I run the UNION ALL qry with the original2 file, An "Enter Parameter Value" box is displayed with the mssing column name "Steve".

Is there a way to Map the original2 table into a working table with all the columns, or use VBA code to construct the UNION ALL qry to only include the existing columns? My data has variable columns and I'm trying to avoid the parameter popups.

View 2 Replies View Related

Transpose Weekday Columns To Rows

Dec 18, 2007

I have a table with 8 columns titled - Destination, Mon, Tues, Wed …to.. Sun. This is shown as "OriginalTable" worksheet in the attached example workbook. I want to create a new table from this original table that looks like "NewlTable" worksheet in the attached example. So I will have a new table that has 3 columns titled - Destination, Day, Weight. Weekdays will become rows so each destination will have 7 rows, one for each day of the week. The measure will be listed against each day of the week. Can someone please look at the attached example for me and help me with this.

Many thanks in advance.

View 2 Replies View Related

Modules & VBA :: Count Of A Variable Range

Jul 30, 2015

1. I have a sample database table in excel where depending on column 2 value >1 is checked and logical results by IF check placed in Column D. The values having "Y" in column D are placed in Columns E:F.

2. Now I want to place count of values meeting the condition on last cell of the filled E:F range.

3. VBA code written by me proceeds fine and places values meeting condition in column E:F

4. I am beginner to VBA and finding difficulty in proper code for placing sum of counts of acceptable values in range F2:F7 in cell F8 ie last value in the array. Presently I have placed the value by In-built Count function in Excel.

File Count on Macro from another table is attached.

View 1 Replies View Related

Queries :: Count Multiple Columns From The Table?

Aug 26, 2014

I want to count data from my table ( Table ) and to display result like a dashboard (Desired result ). To count this do i need to write query for every column and then link to final column? i have totally 300 columns to count I am attaching Table & desired result images;

View 5 Replies View Related

Modules & VBA :: Extract PDF Data To Table

Nov 21, 2013

Through searching, I have seen a lot of post regarding 3rd party downloads to extract pdf data to a table, any coding or a sample database that doesnt require 3rd software?

In the end, I want to import the pdf data to the table, then attach the pdf file automatically. URL....I have a pdf form that was developed in Adobe Live Cycle. For sake of example, lets say my form object names are:

TextField1
TextField2
DateField1
CheckBox1
CheckBox1[3]

View 13 Replies View Related

Extract Value Only For Few Columns Dynamically From Result Set

Aug 4, 2012

I have table with following Columns:

Banker
Status
Week1

Week2
Week3
Week4
......
Week48
Week49
Week50
Budget
YearMonth

I need to extract the value only for few columns dynamically from result set. I have written following code for the same:

Code:
i = 0
strColumnsSQL = "Week" & CStr(gsReportingWeekNo)
Do While i < 4
i = i + 1
strColumnsSQL = strColumnsSQL & ",Week" & CStr(gsReportingWeekNo) - i
Loop

[code]....

View 1 Replies View Related

Modules & VBA :: Extract Strings From A Field In Table (Separated By Colon)

Oct 21, 2013

I have a field in a table that I'd like to extra the texts from. The are stored in below format (separated by colons). They don't always the same amount of characters and not all of them have the same amount of texts.

Some may only have Text1:Text2::, while some may have Text1:::Text4.

Text1:Text2:Text3:Text4

View 8 Replies View Related

Extract / Count And Report From Multiple Queries?

May 20, 2013

I have set up a table for statistical information of students from our 8 campuses (campus, student first name last name, dob, parent info, grade, etc.). I have a query set-up for each campus.

I also have an excel spreadsheet when a student enrolls I change the number of students from each campus that are in grades 1-3, 4-6, 7-8 and 9-12.

Since I have already entered this information into my Access DB, I am wondering why do double-duty (thereby risking my forgetfulness) when I should be able to extract that information from these queries? Not sure how to do this in this grouping, per campus, giving a total count for each campus.

View 1 Replies View Related

Modules & VBA :: SQL Statement DELETE With Variable As Table

Aug 14, 2014

I'm trying to run this very very simple code but I get a Run-time error '3450' Syntax error in query. Incomplete query clause. For sure the problem is the variable I used as Table parameter but I cannot understand where my error is :

Private Sub cmdRunCheck_Click()
Dim strSQL As String
Dim strTempTbl As String
strTempTbl = "tblCheckDoubles"
strSQL = "DELETE * FROM " & "'" & strTempTbl & "'"
CurrentDb.Execute strSQL, dbFailOnError
End Sub

What is clear is that if I use this line the Sub is working smoothly

strSQL = "DELETE * FROM tblCheckDoubles"

Please do not tell me that it is not possible to use a variable as Table parameter....

View 8 Replies View Related

Modules & VBA :: Searching For A Variable With Date Criteria In Table

Jun 14, 2013

I'm trying to search for a variable (varCod) in a table(SerialNumberCustomer) but I want to only store the returned variable in an array if its shipDate is between 9/30/2001 and 10/1/2012

this is what my code looks like so far:

Set rst = CurrentDb.OpenRecordset( _
"Select * from SerialNumberCustomer WHERE SerialCardId = " & varCod & " AND (ShipDate BETWEEN #09/30/2001# AND #10/01/2012#) ")

The line of code works and it returns all of the values in SerialCardId where it's = to varCode but it doesn't go through with the shipDate requirement. It's instead returning all of the dates with the found value.

View 13 Replies View Related

Modules & VBA :: Error 91 - Object Variable Or With Block Variable Not Set

Jul 8, 2013

Error 91 - Object variable or With block variable not set

I am getting this error telling me that an object variable is not set.

I know which variable it is but when I step through the debugger it sets the variable and all is fine? Issue is that public variable of a class is not getting set when the VBA Editor is not open?

View 14 Replies View Related

Modules & VBA :: Sorting / Object Variable Or With Block Variable Not Set

Oct 3, 2014

This code runs fine the FIRST time, however trows up a message the SECOND time it is run.

The error is on the line ".Range"

I am trying to sort records which have been exported to Excel.

Dim LR As Integer
LR = 5
Set xlApp = CreateObject("Excel.Application")
xlApp.Visible = True
Set wbRef = xlApp.Workbooks.Add
With wbRef

wbRef.Activate
.Worksheets("Sheet1").Activate
With ActiveSheet
.Range("A2", .Cells(LR, "O").End(xlUp)).Sort Key1:=.Range("C2"), Order1:=xlAscending, Header:=xlYes
End With
end With

View 3 Replies View Related

Modules & VBA :: Button In Form -Selection Variable Table To Import

Nov 19, 2014

I wanna create a button in form which can allow me to import my data base file with some tables , i would select just the variable that i need in the table not all of them .

View 2 Replies View Related

Modules & VBA :: Update Contents Of Variable But Not The Variable Itself?

Aug 20, 2014

I look at a lot of files to see when they were last updated. I wanted to write a generic procedure to manage that so ..

Code:
Public fDate As Variant
Public vField As String
Public vFile As String

'GTSdata
vField = "txt_gts_data"

[Code] ....

What I hoped Me.vField would do is update the date field [txt_gts_data] on my form with the date the file was last saved.

i.e. me. txt_gts_data = fDate

What actually happens is the variable vfield gets updated from "txt_gts_data" to 19/08/2014 then later code falls over because the fieldname is lost .

Me.[vField] corrects itself to me.vField (and does not work)
Me!vfield falls over (cannot find the field vField, not surprising J)

How do I say update the contents of the variable, not the variable itself?

View 7 Replies View Related

Modules & VBA :: Using Temp Variable To Append Specific Number Of Records To Table

May 29, 2014

I need to extract a specific number of records into a table using a MakeTable or Append command using a temp variable, e.g. TempK&SA. Previously on the forum I was shown how code could be added to the OnOpen function to use a temp variable to select a specific number of records to report. ACCESS does not have the OnOpen function in the design view of a query like in the report. It does allow a SELECT TOP but only with fixed variables or percents (e.g. 25 in the code below).

The beginning code for the make table query (where 25 is the number of records added) is:

INSERT INTO [Output] ( RndNo, PointBiserial, BloomsTax, DateRevised, Exam1, Status, Exam2, Exam3, Exam4, [NCCPAKnowledge&Skills] )
SELECT TOP 25 TestBank.RndNo, TestBank.PointBiserial, TestBank.BloomsTax, TestBank.DateRevised, TestBank.Exam1, TestBank.Status, TestBank.Exam2, TestBank.Exam3, TestBank.Exam4, TestBank.[NCCPAKnowledge&Skills], *
FROM TestBank
WHERE (((TestBank.PointBiserial) Is Null Or (TestBank.PointBiserial) Between [TempVars]![TempPointBiserialLow] And .....

how to modify the code to allow a temp variable to determine the number of records to append to another table would be gratefully received. (This process then is repeated for a total of 7 append tables with different temp variables.)

View 7 Replies View Related

Modules & VBA :: Reads List Of Files Sequentially - Check For Variable In A Table

Aug 2, 2013

I have a process that reads a list of files sequentially and then processes them .... As each file is processed, its name (strfile) gets written to a Table (Vault.[Processed_file])

I want to verify if the file exists in the table prior to processing it - if it exists, I won't process it again ...

View 5 Replies View Related

Modules & VBA :: Add Rows To Table Based On Record Count Of Another Table

Mar 10, 2015

I am trying to assign teams to players. I have an import table with all of the players information listed. What I want to do is determine the count of players in a given city. For every 9 players I want to add a new record to the Team table and assign the team number (auto incremented for each team created). Then I want to add the players to the Players table with the Team Number that was created.

View 8 Replies View Related

Modules & VBA :: Expanding Treeview Automatically When Node Matches A String Variable From A Table

Jul 14, 2014

I'd like to expand me tree view automatically when a node matches a string variable from a table. In other words, when a node in a tree matches the given name (variable), the tree will expand all the way down to that name. I guess I need to use "For each node" and when the node and variable match, the tree structure will show up.

I have come up with something like this:

Code:
For Each nd In Me.tree.Nodes
If nd = level1 Then
nd.Child.EnsureVisible
Exit For
End If
Next nd
Me.tree.SetFocus

But this only shows the first level of my tree ( btw. I have a 3 level tree). I get lost inside the FOR when I want to make use of another two variables - level2 and level 3

View 1 Replies View Related

Modules & VBA :: DLookup - Check 2 Criteria In Two Different Columns In Same Table

Dec 2, 2013

I would like to make a DLookup that check 2 criteria in two different columns in the same table. The reason to use a DLookup is that I would like to check if two parts already have been linked together. The user therefore selects two values in to different comboboxes (lstLinkPart and lstLinkToPart). In this case the value of the first combobox is column: ComponentPN in tblProductLinkComponent. For the second (lstLinkToPart) column ProductPN, in the same table, has to be checked.

If both values from the comboboxes match the values in both (and only) columns I don't want to continue and made a code to be executed.

I found multiple examples on the internet for using multiple criteria but something similar to what I require.

View 6 Replies View Related

Trying To Update Rows Based On A Count Variable

Sep 1, 2006

Apologies if this is a basic question. Here's my situation:

I'm trying to update rows in a table based on a count of items in the same table. The table in question contains order line items. On each line item, I'd like to store the total number of items attached to that order (because it affects how the individual line items are processed).

I have a query that seems like it should do the trick, but Access doesn't like it:

UPDATE sales AS S1 SET S1.EXPC = (select count(*) from sales S2 where S2.order_id = S1.order_id AND S2.product_code = "EXPC");

Here's the error I get:

Operation must use an updateable query.

Thoughts?

View 5 Replies View Related

Modules & VBA :: Count Number Of Rows In A Table?

Nov 10, 2014

I need to write a code that checks if every 6 lines in a table contains a string. If it contains the string, then carry on looping, but if it does not, it will delete the current line and the previous 6 lines before it. The program should then continue looping through the entire table.

For example,

Code:
Apple
a
b
c
d
e
Apple
f
g
h
i
j
Apple
l
m
n
o
p
q
Apple
.
.
.

I need to find the string "apple" in every 6 lines. So, that means that the first 2 Apples are fine, but for the third one needs to be deleted as it contains 7 lines instead of 6.

View 14 Replies View Related

Modules & VBA :: Loop Through A Table Count Duplicates Only Once

May 13, 2015

I am trying to loop through a table and count the duplicate records only once. Please see the attached file.

1) In the test table, I want to loop through all pt_accts.

2) In the countable column, if an acct repeats, I essentially just want to put "1" in one of the records. For the non-repeating accts, putting in a 1 is sufficient. Basically, I just don't want to count the duplicate ones multiple times.

In the example, acct "aaa" repeats, but there is just one "1" in the countable column. "eee" repeats as well, but there is just one "1" and the rest is 0.

Is this possible via VBA?

View 14 Replies View Related

General :: Parse Substring From Barcode With Variable Digit Count

Aug 23, 2012

I need to identify and parse (substring) a number of digits from a barcode. The barcode digit count will vary, based on the number of details included in the barcode.

For example: the barcode for GS1 DataBar begins with a 4 digit code of 8110 identifying the code as GS1. The 5th digit then identifies the number of digits directly following which constitute the manufacturers code, which can range anywhere from 6 digits to 12 digits. I need to pull the number of digits out of the barcode based on the value of the 5th digit placeholder and pull only that many digits from the string and replace them into another field. There are potentially 70 total digits in the barcode. I have only provided the first section, which I am asking the question on.

Simply put: I need to tell the substring to identify the number to parse from digit 5, (which will have a min of 6 digits and a max of 12)

How do I pull the information out of a string to create a substring in another field by first defining the number of digits to pull out (Digits 6 to 17 min of 6 digits and a max of 12 digits) based on a value within the string (digit 5= value)

So if Digit 5 is 6 the returned value would be: Digits: 6 7 8 9 10 11 (6 6 6 6 6 6 )

If Digit 6 is 9 the returned value would be: Digits: 6 7 8 9 10 11 12 13 14 (9 9 9 9 9 9 9 9 9)

The first portion of the barcode is below: There are other pieces necessary to be pulled the same way, but from other sections, and based on yet another X desinator field (the next with a min of 1 and max of 5) I assume the pull would be similarly completed.

I don't know how to write code, I have used formulas but not this detailed or specific.

Ex: I know = Min (barcode, 5, 6) would pull the 6 digits after the 5 spot, but how do I vary the 6 (count) number in the formula?

Example below: No additional spaces, dashes, letters etc. (A's = 1-4, X = 5, M's = 6-17)

A A A A X M M M M M M M M M M M M

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

View 2 Replies View Related

Modules & VBA :: Count Number Of Records With Date From A Table

Sep 24, 2014

I have a table which specifies the delivery date

I have a from that allows you to choose a year and a month.

I have an unbound textbox which I wan to display the count

I want to be able to count all the records from a table with the year and month specified in the comboboxes and display this in the texbox.

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved