I am trying to extract information from a fillable PDF form that my company has created. Rightfully so, they have completely locked down all options, so I am not able to convert the file in Adobe Reader to a text file. I've seen options to extract information using VBA code with Adobe Acrobat; however, I do not have a license for the program. Is there any VBA code that uses Adobe Reader to extract information and put it in an Access database?
I have over 500 folders that contain XML files in each folder. I need to go through each folder and append the data from the XML files into my database.
You guys have been so helpful in the past. Perhaps you can help me with this as well. I believe it’s a bit out of my scope. I have a list that reads similar to this:
Field 1
DMA: ALBANY CAR 1 CAR 2 CAR 3 DMA: BOSTON CAR 1 CAR 3 CAR 4 CAR 5 CAR 6 DMA: HOUSTON CAR 1 CAR 3 CAR 4 CAR 5
I need it to read like this:
Field 1 Field 2
DMA: ALBANY CAR 1 DMA: ALBANY CAR 2 DMA: ALBANY CAR 3 DMA: BOSTON CAR 1 DMA: BOSTON CAR 3 DMA: BOSTON CAR 4 DMA: BOSTON CAR 5 DMA: BOSTON CAR 6 DMA: HOUSTON CAR 1 DMA: HOUSTON CAR 3 DMA: HOUSTON CAR 4 DMA: HOUSTON CAR 5
If my list was this short, I would do it all manually, but my record list is in the 10,000s. Basically I want field 1 to read: DMA:ALBANY and Field 2 to read:CAR 1, and so on. I’ve tried linking the table to itself in a query, however, that hasn’t proven to be helpful. I've also searched the FAQ's and newsgroups. Any insight would be appreciated.
I probably have an easy question for one of you out there, but I just cannot get it myself.
I need to extract the data between two characters in a string.
The data will be similar to this:
T4454: Text Text-Text: $296.07: Text Text
I need to get the dollar amount between the dollar sign and the colon on the right of it.
So far, I have this for my query:
Amount1: Mid$([subject],InStr([subject],"$"))
Which gets the amount to the left side, but also has the $ in it.
In the example above, I would like to just end up with 296.07 as the result from the query. I should also add that the dollar amount may vary from 1.00 to #,###.00
Hi, I have a combo box, which the first and last name of an employee is combined using trim. Does anybody know of a way to seperate both fields as these would be used an a query so I would need them seen as 2 fields otherwise there won't be any matches.
Is there a possibility to use a shorter code for extracting one field from one record, than opening a recordset, getting the field, closing it and setting the recset to "Nothing" again? I'm doing this multiple times in my code and it seems a bit too much for what it's supposed to do.
Code: sql = "SELECT tblAdFlgDaten.* FROM tblAdFlgDaten WHERE (((tblAdFlgDaten.AuftrID)=" & ABAuftrID & _ ") And ((tblAdFlgDaten.Schritt)=2))" Set RSnap = dbase.OpenRecordset(sql, dbOpenSnapshot) If IsNull(RSnap.Fields(2)) Then ... ... End If RSnap.Close Set RSnap = Nothing
I need to be able to extract individual fields from a table as strings in order to then send this data to my EPOS printer (which will accept only strings to print) I have created the table with a query so the question could equally be how can i output strings as query results. Im using Access97 HELP!! I have tried to set up a ADODB.Connection but either Access 97 wont accept it or i've got the coding wrong
I have a table called "tblEmployees" with the following fields: EmployeeNo (Primary key) Name Address DOB etc Letter1Dated Letter2Dated
I have another couple of tables:
"tblLetter1" with the following fields: EmployeeNo (Primary key) Name Letter1Dated Letter1RemainingFields...
"tblLetter2" with the following fields: EmployeeNo (Primary key) Name Letter2Dated Letter2RemainingFields...
I want to be able to put the data from 'Letter1Dated' field (from the "tblLetter1" table) into the 'Letter1Dated' Field in the "tblEmployees" table. Likewise, I want to be able to put the data from 'Letter2Dated' field (from the "tblLetter2" table) into the 'Letter2Dated' Field in the "tblEmployees" table.
All three tables have the same primary key (EmployeeNo), which makes it even more difficult to do this! I understand this may sound abit confusing so i apologise for this.
I would really appreciate it if anyone could point me in the right direction please.
when I have created my table I have created a field called name that stored both last and first name. Right now I need to extract the the last name from the the field name and store it in another field "lastName". Any ways to do that?
Hi, I need a little help. I will give you the background on what i am doing to hopefully make this easier to resolve. P.S I am open to other approaches.
2) The following Module concatenates the columns (my idea being the user can order all items in bulk.
Code:Public Function Conc(Fieldx, Identity, Value, Source) As Variant Dim cnn As ADODB.Connection Dim rs As ADODB.Recordset Dim SQL As String Dim vFld As Variant Set cnn = CurrentProject.Connection Set rs = New ADODB.Recordset vFld = Null SQL = "SELECT [" & Fieldx & "] as Fld" & _ " FROM [" & Source & "]" & _ " WHERE [" & Identity & "]='" & Value & "'" ' open recordset. rs.Open SQL, cnn, adOpenForwardOnly, adLockReadOnly ' concatenate the field. Do While Not rs.EOF If Not IsNull(rs!Fld) Then vFld = vFld & ", " & rs!Fld End If rs.MoveNext Loop ' remove leading comma and space. vFld = Mid(vFld, 3) Set cnn = Nothing Set rs = Nothing ' return concatenated string. Conc = vFldEnd Function
3) A query calls on this
Code:SELECT Conc("ID#","PartNumber",[PartNumber],"Qry_70_BOM_Awaiting_Order") AS [BOM ID#], Qry_70_BOM_Awaiting_Order.PartNumber, Sum(Qry_70_BOM_Awaiting_Order.[Qty Req]) AS [Total Qty Required], Conc("Work Order","PartNumber",[PartNumber],"Qry_70_BOM_Awaiting_Order") AS WOrdersFROM Qry_70_BOM_Awaiting_OrderGROUP BY Qry_70_BOM_Awaiting_Order.PartNumber;
I would like my users to purchase againts the new BOM ID# records as seen above. Once a order is placed against these i will, put something against each records to show there order status. (i'll take care of this part.)
Finally, sorry about the lenght of this, I need to be able to use the above BOM ID# to reference back to the the ID# table at the start of the thread. In this example Id's records 2 - 4 and 5 will show ordered.
In other words how do i extract 2, 4, 5 back out of the above and into there original state, but including the order status?
I have a flat file sent to me today that contains a number of fields with the same issue. As an example, I have a field named Coordinators from a table named Audit and the data within it is formatted as follows:
Mark Hollings;#14664;#Judy Thompson;#10169;#Tammy Wilson;#3608;#Tim Levy;#2785;#David Simpson;#1251
Is there any way to extract only the names while leaving in either the ";" or replacing it with a ","? My desired output would look like this:
Mark Hollings;Judy Thompson;Tammy Wilson;Tim Levy;David Simpson
This field can be populated with one or more names so that's a variable in all of this as well.
I am building a database for a coworker. For one table, he'd like to extract data from different companies' financial reports, specifically a Schedule RC-B (schedule of securities). The format it comes in is PDF, but there are options to download XBRL, SDF and Taxonomy. My computer doesn't recognize any of these other formats. Plus, I'm guessing each company will have a slightly different format, so I don't know if there'd be an efficient way to set up an automatic import. Any way for importing/extracting data from these files?
I am an access (2003) amateur, willing to generate an excel file or table from the data from many queries. Moreover, some fields in those queries having different names but same data type, should be filled in the same columns in the new excel/table. Should I use Macro/SQL?:(
I have a feedback database with 3 tables, one for complaints, compliments and other. They have the standard common fields such as name, address, date received, nature of enquiry, investigating officer etc etc.A person can have more than one record in the complaints table and that same person could also have 1 one more records in the compliments and others table. What I would like to do is to be able to display the data for that same person that appears in the complaints, compliments and others table in a report using a search facility by either name or address. This will therefore display the number of times that this person has made contact together with dates and the reasons.
I have a table in msaccess which i would like to use as a search term to search values in another table. What i wanted to do is search the table with attributes and save all found attributes to a new table with its primary id.
Search_Keyword_Table Id ---- Search_keyword 1 ----- Size - S 2 ----- Size - M 3 ----- Size - L 4 ----- Size - XL
I wish to extract data from my access database...namely all packages we are taking to the post office for dispatch that day. The post office form looks like this...
I need to extract the name the address & postal service used (this data is all contained in our access database. I envisage using a 'flag' to trap those orders that haven't been posted yet (in other words export only those database entries that have not been flagged as posted, then afterwards update the database to change the flag to 'posted')
My dilemma is that I've not really used reports much (I'm assuming that reports is the correct way to go here)...how do you format the output of a report, when you don't know how many lines are going result (some days might see 10 order, other days 20 ...and so on)...
I need some help. I created a database to capture information from an employee survey. Most of the answers required a check if they agree or no check if they do not agree. There was one "memo" field inwhich we allow the employee to VENT. I have provided the team with all sorts of reports with percentages and figures. Now they want to remove any comment that had money, pay raise, bonus etc. They also want to organize the comments in some type of flow. Like all the "pats on the back" in one area, Day offs in another, plaque on wall grouped together, etc.
I am totally new to access and i want to be able to extract information from my database using a form. Basically I am using the database to generate a bill of materials. I have a product that has many different options. SO I want ot select a checkbox on a form for a particular option and hten have that extract the correct data from the DB into a report or spreadsheet.
Hi, I am extracting data from linked db2 table using access make table query. First I create a select query and can view the linked db2 data, but when I change to a make table query I get an error message, "invalid argument", when I run the make table query. There is no selection critera specified. Has anyone had this happen? and Do you know a solution?
I want to use the same form in datasheet mode for data entry and retrieval. When retrieving, all controls are disabled and locked. I am trying to enable and unlock them for modifying but that isn't working.
Can I look up and verify data on a "second" form based on a selected record from first (still open) form.
I am trying to allow users to select a User Name from a combo box list and then open "Change Password" form when they select "Change Password" for that selected user name.
My problem is that I can't figure out how to associate and verify the data tied to the user name selected on the previous (Login) form ( I am trying to validate the old password tied to that selected record).
I have the first login form created, and it's working just fine. I also have the change password form created (and it's displaying the user name selected from the first form using:
Code: Private Sub Form_Load() With Forms![frmLogin]![cboUserName] Me.txtPwdChgUserID = .Column(2, .ListIndex) End With EndSub
I also have the code written to validate and confirm old password, new password and validate new password (when the save button is clicked). I have yet to update the password with the new password (still trying to figure that out).
Attached zip file has screen shots of the two forms.
What I'm trying to accomplish is some sort of 'Order Confirmation' (filled with the info i have entered in my order form and sub_form fields) that i can copy and paste as a reply to their email-order.
I have taken 2 failed approaches so far:
1) I used a report to display the info
Private Sub Command103_Click() DoCmd.OpenReport "Order Confirmed", acViewReport, , "OrderID = " & Me!OrderID End Sub
This worked fine until the information was copied and pasted into outlook which upon doing so changed the column titles and layout
2) I used another form with a text box to fill with the data entered on the Order form
