I inherited this quote and trying to enhance it but having problem.
The filter in navigation form is not working but it is on its own form, the filter is working without problem.
I have a navigation form which has two subforms on it (ie 2 tabs linking to different forms). I have got aq filter working for one of the forms but not on the other. This is using
If IsNull(Me.txtoperationscontract) Then
MsgBox "Please type a contract number into the textbox!", vbInformation + vbOKOnly, "Incorrect Details"
Else
Me.OperationsSubform.Form.Filter = "[Contract]='" & Me.txtoperationscontract.Value & "' "
Me.OperationsSubform.Form.FilterOn = True
End If
The problem is that it does not work on subform B because the Contract field does not exist.
I have a form with a bottom that has a macro that uses applyfilter to filter the current form based on what is within a textbox located on the form.
I used the macobuilder and have my where condition as
[num] Like "*" & [Forms]![frm_Main]![Text181] & "*" Or [name] Like "*" & [Forms]![frm_Main]![Text181] & "*"
This works when I open the form by itself but when I try adding the form to a navigation form I get prompted to put in "num" and "[Forms]![frm_Main]![Text181] " etc. when I click the bottom.
I have a form that uses a listbox. I can select multiple items and then update a subform. When I press a button with VBA and use the filter property on the subform for the first time, nothing happens. When I press the button a second time, it does - and it works thereafter with different selections. It only happens that first time, after loading the form and pressing the button for the first time.
I have tested that the list items are accessible via the vba variables and stepping through my code and the problem starts with the filter properties.
the statement:
Me.sbfrmCluster.Form.FilterOn = True
Me.sbfrmCluster.Form.Filter = strFilter
is not switched on first time (I have tried a requery and refresh statement after this). When I step through the code the first time, the FilterOn property remains false. A second button press and it is fine.
I am using the Navigation form and I have a tab that has all the sales quotes for a particular salesperson. Because my salespeople like to work with paper I have created sub tabs which contain a report with the same information but filtered based as follows: this Month, this year, and Last year. This report needs to be printable based on the filtered information so I created a print button within the report however when clicked it prints the entire report not the filtered report.
The filter criteria is located in the navigation button, navigation where under the data properties. I have the on click event of the button set to open the report in print preview but I need to know how I filter the where in the macro to read the criteria from the active navigation button property?
I want to create a navigation form, or any form for that matter that has an embedded report. The report has data arranged by ClientID. I would like to create buttons down the left side of my form (why I thought a navigation form could work) where I can put the client name on the buttons and when I click them the report will filter to only show that clients data. I have client tables and the report data linked in queries, but just need to know how to get started with these buttons acting as ID sorters.
For example:
ClientID: 1 = Client: ABC Corp
In my report ClientID 1's data is grouped along with all other client ID's.
In my form I'd like buttons down the left side with ABC Corp written on it (followed by buttons for the other clients) and then when I click the ABC Corp button only ABC Corp's data shows on the page from the embedded report...
Hi,
I'm working in Access 97 and I've got a form that I want to use to create filters with.
There are a couple of things that I'm not clear about and I'd appreciate any suggestions that you can make:
1. The form seems to remember the last filter, so when I click on the Filter by form button it shows the last filter by default. I've included the following in the click event:
RunCommand (acCmdRemoveFilterSort)
Me.FilterOn = False
RunCommand (acCmdFilterByForm)
Surely either of the first two statements should remove the filter, shouldn't they? and if not then what are they for?
2. I can't get the 'OR' tabs to show at the bottom of the filter by form screen unless I apply the filter once and then click on the filter by form button again. Is there any way of forcing these tabs to appear?
Thanks for any help/advice you can offer.
Regards,
Bernard D
platform : access (adp) / sql server
Problem : form filter not executing in subforms
When I goto one of my subforms I can activate the form filter.
When executing the form filter no records show up, it just keeps showing my criteria. When disactivating the form filter I receive an error message telling that my view must be misspelled (it's about spaces). My view is called Vw_people , as a record source it works fine so it can't be misspelled.
Is the problem the adp connection or the subform? I don't know
I have a report "Work Order Details" that that is based on a query and opens along with a form that is used to set filters. Based on samples I have looked at and reading, I cannot figure out what is missing. When I select my item form one of 5 unbound combo box 's and click the "Set filter" button, it brings up a paramter box?? If I cancel out the box, I still don't get a result. Just for the heck of it, I filled in a name in the paramter box, still no luck. The report property has "Filter On" as YES. The close button, clear button, and drops downs operate perfectly.
Here is the On Click Event info from my "set filter" button:
Private Sub Command28_Click()
Dim strSQL As String, intCounter As Integer
'Build SQL String
For intCounter = 1 To 5
If Me("Filter" & intCounter) <> "" Then
strSQL = strSQL & "[" & Me("Filter" & intCounter).Tag & "] " & " = " & Chr(34) & Me("Filter" & intCounter) & Chr(34) & " And "
End If
Next
If strSQL <> "" Then
'Strip Last " And "
strSQL = left(strSQL, (Len(strSQL) - 5))
'Set the Filter property
Reports![Work Order Details].Filter = strSQL
Reports![Work Order Details].FilterOn = True
End If
End Sub
I recently made a new version of our database complete with forms, querys etc.. using Access 2010. It looked good and nice, but we encountered an unexpected problem. In all forms that contains memo-type fields quick filter is not working (there is no lists, checkboxes etc..). My users really like quick filters and are understandably irritated. I would understand if this disappearance would affect only memo-type fields, but it affects ALL the fields.
I also know that there are problems with memos in Access 2010. I have tried to make new forms, but every time I add memo fields quick filter stops functioning. I have also tried to change properties, options and what not, but to no use. In older versions of our forms this feature works just fine, but they were made in older version of Access (don't know which since oldest ones are from year 2003).
Television
I am using Access 2010.
In my database forms, i try to use Ctrl + F and its working fine. But when i link that form to a Navigation form and tried ctrl + F , i got the following error message, how to fix it.
Error msg.
You Can't use find or replace now.
I also attached the error msg.
I have used one of the members' code which was posted in a tread before to create a search box in a form. This code works perfectly when the form itself is open. Otherwise, when I put this searching form along with other forms in one navigation form, I get the following error: "Enter Parameter Value: Forms!FRM_SearchMulti!SrchText"...The code that was used for the Search box is as following:
Private Sub SearchFor_Change()
'Create a string (text) variable
Dim vSearchString As String
'Populate the string variable with the text entered in the Text Box SearchFor
vSearchString = SearchFor.Text
[code]....
I have a data base that when first opened a login form I created pops up. I am trying to set it up so that when it opens you do not see the navigation pane. once logged in though I do want to have access to that again. I have found other VBA code online but nothing that lets me remove the navigation pane from that first form alone. I have it set so that the Ribbon is not shown when the form opens but does show once a user is logged in.
for the ribbon I used:
DoCmd.ShowToolbar "Ribbon", acToolbarNo
I thought I remembered a while ago reading a code like that for the navigation but not saving it because I did not think it would be needed (I am very new to Access) But now I cannot find it.
I am not able to disable NavigationButton when i login navigation form using login form. I am using MS access 2007 - 2010.i am using below code but getting error.
Forms![Navigation Form]!NavigationButton13.enable = False
Error
Run-time error '438'
Object doesn't support this property or method.
Any other method to disable NavigationButton.
I have inherited maintenance of an Access DB that I did not design and I'm having trouble with their Navigation Form setup. I created a form with a list box and two date fields, and figured out how to build a filter for the form that would open a specified report on a button click. It worked great as a stand-alone form, but when I added it to a navigation control in a navigation form I can't seem to find the right path to tell the VBA where to look for the filter criteria.
In the screen shot, the report to be displayed is in the detail of the "Report Center" tab on the far right of the navigation form "Main." the form "FilterSelection" is inserted in the "NavigationControl0" section under the navigation tabs. Criteria is selected/entered in "FilterSelection" and needs to be passed to the filter of the report that is opened when the "Project Tasks" navigation button is pressed. As I mentioned, when I created the form I put a button on it to open the form with the filter (built via SQL in VBA) it worked beautifully. But now that it's on the "NavigationControl0" object Access errors and can't find the fields where the data has been selected/entered.
I think my issue is that when the user opens my form a record gets created. Thus default value will not work. what happens is; the user fills out form 1 goes to form 2 and on form 2 i want a check box default value to be true...but its always false.
the checkbox in question is adequite staff. the user gets the question, "was there adequate staff" if there was the "adequate staff box" would be true. what i have tried is i created a "dummy" checkbox (checkbox299) entitle no. and labled adequite staff checkbox as yes. on the form2 open insert the following
Code:
If Me.ADEQUATE_STAFF = False And Me.Check299 = False Then
Me.ADEQUATE_STAFF = True
Else
End If
I have a form with two subforms. One subform is a datasheet that pulls data from a temp table. During the other subforms Form_Current, the temp table is emptied (DoCmd.RunSQL "Delete from tblAddRefs"), reloaded with data relevent to the current record, and requeried (Forms("frmEDFP").Controls("tblAddRefs subform").Requery). This works like I want it to...
With the exception of the initial load of the main form. The subform based on a table shows (#Deleted) instead of data. if I step through the code, I can see that the temp table is emptied and repopulated by the time I try to requery the subform. This is still happening during the Form_Current of the other subform, which is successfully running on main form load.
If I requery (Forms("frmEDFP").Controls("tblAddRefs subform").Requery) using a button on the main form once it is loaded, the #deleted data is correctly is replaced by regular data, so it's like the requery in the Form_Current event isn't doing anything during load.
I have a query that filters two tables. 1) Status 2) Name
The status is 1,2,3,4,5 from an option group on my form.
In the query I have <>3 for the status, whereby I only want records that are status 1,2,3,& 5.
When I run the query with all names it works perfectly, however I am trying to run the query for only a select few names versus all of them.
The problem is I do not know how to select only a few names versus all of the names and make it work. When I try to add names i.e "Doe, John" my Status pulls all records including option 3.
Can anyone help? I do not even know where to start seaching.
Thanks.
Fen How
I have an Access 2010 database with two tables and two forms. The tables are Organizations and People. Similarly, the forms are Organizations Entry Form and PeopleEntryForm. The People are linked to the Organizations table. Several people can be linked to the same organization.On my Organizations EntryForm, I created a command button to duplicate a record using the wizard. It works fine.
I did exactly the same thing on the PeopleEntryForm, but instead of copying the record, it creates a new blank record. I don't get any error messages. Is my problem due to the fact that the People table is linked to the Organizations table?
I have a table like this
Cultureworkload
ReasonfortestingIRLNumberDiagnostic sputum specimens processedFollow up specimens processedReception
Follow up7/20130102-Jan-13
Diagnosis8/20131002-Jan-13
Follow up9/20131002-Jan-13
Diagnosis10/20131002-feb-13
Follow up11/20131003-feb-13
Diagnosis14/20131003-Mar-13
Diagnosis15/20131003-Apr-13
I built a query with the wizard to group by Reason for testing
The SQl was
TRANSFORM Count(Cultureworkload.IRLNumber) AS CountOfIRLNumber
SELECT Cultureworkload.Reasonfortesting, Count(Cultureworkload.IRLNumber) AS [Total Of IRLNumber]
FROM Cultureworkload
GROUP BY Cultureworkload.Reasonfortesting
PIVOT Format([Reception],"mmm") In ("Jan","Feb","Mar","Apr","May","Jun","Jul","Aug"," Sep","Oct","Nov","Dec");
Although I filtered reception field by month to 1st quarter it shows empty months like Apr,May Jun etc.
vba code for filtering the records of the form made out of a table. The form contains combos that contain the lists of unique records in several colomns of the source tale. So i need to filter the records of the form using the combination of the values of that combos. But can't even apply a single filter using this code:
Me.Filter = "Business = " & list59.Value
Me.FilterOn = True
"Business" is the name of the column in the source table, and the "list59" is the name of the combo which contains the unique records of the "Business"
the code takes place as a button "apply" is pressed
I want to be able to show all records from tblRecords where, The [tblUser][PositionID] = The Value selected on the list box.The problem being I don't know how to do this with them all being on seperate tables and linked via relationships. I.e. [tblRecords] only holds the UserID, [tblUser] has the PositionID.
I also need this value to keep building towards my filter string, i.e. I can select this position ID and records from within the past 4 days.I've attached pics of the form and relationships.
Here is my current code:
Code:
Option Compare Database
Option Explicit
Private Sub cmdReset_Click()
'Purpose: Clear all the search boxes in the Form Header, and show all records again.
Dim ctl As Control
[code]....
I seem to be having a problem with access 2007
When I use the filter by form, filter by selection, and toggle filter buttons located on the ribbon, they work normally on my form, in the usual way.
However when I use the button wizard to add the various available filter buttons to my form, it adds the buttons with the correct graphics on - but in form view clicking on the buttons does not actually do anything.
I've tried running compact and repair but still the same.
I have the following code which builds a filter on my form which i can then generate a report from.
However id like to add a check box to exclude rather than include a certain [Error_Type] which is "Wrong Batch" and im not sure how id do it..
the vba i have so far is as follows
Code:
Private Sub cmdFilterConvErrors_Click()
Dim strWhere As String
Dim lngLen As Long
Const conJetDate = "#mm/dd/yy#"
If Not IsNull(Me.txtqccheckby) Then
strWhere = strWhere & "([Error_QC_By] = """ & Me.txtqccheckby & """) AND "
[code].....
I am fairly new to VBA and am trying to apply a filter within a form so that agent records can be filtered based on an agent's name (so that they can only see information that refers to them).
I also want a record to be removed when it has been completed (when this habbens a date completed field will populated) however I do want to see those completed records that refer to the agent that have been completed today.
Here is my code. The 2 filters work on their own howver when I put them together I get a mismatch error.
If Me.txtRole = "Agent" Then
DateCompletedFilter = "(DATECOMPLETED Is Null) Or (DATECOMPLETED = Date())"
AgentFilter = "CASEOWNER ='" & Me.txtName & "'"
DoCmd.ApplyFilter , AgentFilter And DateCompletedFilter
Exit Sub
End If
I am using combo box to filter records from a form. The data source for the form is from a query.
I use the combo box within the query to filter the data, I would like the form to refresh/ run the query again every time a new selection is made from the combo box.