Modules & VBA :: Form Not Updated After Adding A Record
Oct 31, 2013
In one form, I have to click on button that opens the other form. Each form is bound to its table and those two tables are linked by Primary [RaDAR_Id] and Foreign [radar_id] fields. I would like the code to:
* open the other form
* move to the first record that has [radar_id] = [RaDAR_Is] if exists
If there is no any record in the other form that contains [radar_id] = [RaDAR_Id] then I want to create such record. So I am using the code (below). The problem is that the other form is not being updated.
Code:
Private Sub cmd_edit_usage_Click()
' DoCmd.OpenForm "frm_edit_usage"
Dim lngRadarId As Long
Dim patientId As Long
Dim rsUsage As DAO.Recordset
Dim rsUsageWrite As DAO.Recordset
[code]....
View Replies
ADVERTISEMENT
Jan 26, 2015
i want to be able to create an On Click Event when pushing a command button that will run an Update query to update a record and after it has been updated that specific record will pop up on a Form and be displayed. i know a different way is to run the Update query and then have it displayed in a Select query but i want it to be displayed on a Form instead. is it possible?
View 4 Replies
View Related
Aug 31, 2013
I have a form based on a mysql table. There is a button in the footer to add a new record.
The pertinent vba code: DoCmd.GoToRecord , , acNewRec
It adds the new record and properly places the cursor in the first field. Immediately after the first letter is typed, the error message "Field cannot be updated" pops up. I can click ok and the message goes away and I am able to continue filling in the fields. The same thing happens if I add the record by use of the record selectors.
View 14 Replies
View Related
Nov 26, 2013
I have a form to add a record to a table. How can I give the user a way to close this form without saving the just created record.
I tried
If me.dirty then
DoCmd.RunCommand acCmdDeleteRecord
endif
This works, but gives a messagebox in return to confirm the command, and I don't want that. And I try to avoid sendkeys. I also don't want to change the options of access.
View 2 Replies
View Related
Dec 14, 2014
I have a form for entry and some fields are computed or result of a query from another table. I have a function that looks up a value from another table like so
************************************************** ********
Public Function GetTargetType() As Variant
GetTargetType = DLookup("type", "tblFormulations", "[tblFormulations!formulation]=Forms![frmNmsConsumptionEntry]![formulation]")
End Function
************************************************** ********
Which works fine when I test in the immediate window.Then I have this form event. This however does not insert this value when I am adding records using my continuous form.
************************************************** ********
Private Sub Form_BeforeInsert(Cancel As Integer)
Me!target_group = GetTargetType()
'Forms!frmNmsConsumptionEntry!target_group = GetTargetType()
'[tblNmsConsumption.target_group] = GetTargetType()
End Sub
************************************************** ********
making sure I can insert this value once retrieved.
View 7 Replies
View Related
Sep 9, 2013
In my Access 2010 database there is a form with a large number of checkboxes enabling me to select/deselect certain record details.
Each click on one of the checkboxes triggers a VBA routine setting true/false values in one of several tables linked to the main table.
A query over all records is filtered by the true/false values of the linked tables and the resulting set of records is displayed in the (continuous) form.
The header of the form contains a text field with the value "=GetRecCount()" displaying (correctly, but randomly fast) the number of records selected:
Code:
Function GetRecCount() As String
Dim NumRecs As Long
Dim rs As Object
On Error Resume Next
Set rs = Forms![Super Search].RecordsetClone
rs.MoveLast
NumRecs = rs.RecordCount
Set rs = Nothing
GetRecCount = Format(NumRecs, "##,###")
End Function
Now, the funny thing is that each click on one of the boxes results in 1 call of the VBA routine setting table values, but 21 calls (!) of the text field "=GetRecCount()" in the form. I have established this by incrementing a public variable at each pass.
Why a field in a form is updated 21 times when a filter is applied?
View 4 Replies
View Related
Oct 2, 2013
Is it possible to open a form to add a child record related to the highlighted record in the subform?
View 2 Replies
View Related
Mar 12, 2015
I have lots of combo boxes in my forms that are mostly limit to list as I want the people entering the data to actually add the full details of a client or supplier or whatever instead of just typing the information in over and over again. if the person/client/supplier is not in that list I have a button that will pop up a form so they can add a full new record but I need it so when they add the new record it will show up in the combo box in the intial form once it has been saved and closed without having to also close that initial form and reopen it or manually refreshing it.
right now I am using an if statement on the save button on my popup form that looks at what form is open and if that form is open then it refreshes that form after the save and closes which works fine but adding this to every form and combo box combination is very tedious, so I thought I would ask here, what is the best way to update combo boxes after and new record has been added via another popup form?
View 2 Replies
View Related
May 16, 2015
I want to enable a few fields when i click on the Add button on my form.I have change the onclick to Event Procedure to be able to add the following code
Code:
Category_Desc.Enabled = True
My Category_Desc field get enable as expected but the Add button no long work
Code:
Private Sub add_Click()
Category_Desc.Enabled = True
Me.Refresh
End Sub
View 1 Replies
View Related
Aug 25, 2013
I want to add a record with attachment to a table in an access (2013) database.
If I ignore the attachment error everything works as it should, but as soon as I add the code for the attachment I receive error code 3259.
Code:
Private Sub add_tune()
Dim dbtune As DAO.Database
Dim rst_tune As DAO.Recordset
Dim rst_tune_in As DAO.Recordset
Dim rs_child As DAO.Recordset
Set dbtune = CurrentDb
[code]....
Since I have a dutch office version the error text (ongeldig veld gegevenstype) is in dutch, translated it means something like a data type mismatch.
t_first_bars is a field in the table tbl_tune . The field type is attachment.
View 6 Replies
View Related
May 13, 2015
I am currently working on an Access Database that houses our security clearance information. Most of the system is up and running but the most recent form has got me spinning my wheels. I have a Word User Form that users will download and complete, once completed the macros will automatically send us the document to be added to our database. Most of this is working the problem is that this portion of the database has multiple related tables and at any given time a user may require multiple records in the related tables. I have created the code to copy most of the information but am getting stuck adding a new record on the sub-form when multiple items are required. Here is a breakdown of the scenario
Word Doc Table 1 = Basic Organization Info
Word Doc Table 2+ = Sites to Visit (There could be more than 1 table added here)
Word Doc Table 3+ = People to go on site (this might not be the third table based on user interaction for sites)
So far I can get Table 1 and Table 2 data but if there are more than 1 site I cant seem to get the system to create a new record on the related table it is creating a new record on the main form. Here are the lines I used to try to create the related record..
Me.RFV___Agencies1.SetFocus
DoCmd.GoToRecord , , acNewRec
When I put just the above code on a button it seems to have worked as the sub-form showed an additional record was created but when using this on my macro the sub-form is not taking the focus for some reason.
View 1 Replies
View Related
Mar 30, 2015
I have a parent form which has a class variable (class module instance) to store the form' status and more.... and when i add a new record to the subform it resets the class variable field' data. but this only happens on first transaction, but if i re-run the steps (re-set the variable field value) it's not happening again.
View 3 Replies
View Related
Jul 2, 2007
New member, so forgive me if this has been covered before:
Trying to build a Business database (more for the exercise than any desire to run a business) and have the following problem -
Have a Purchase Ordler Line table and an Item table - the item in the PO line is a lookup from the Item table - I want the PO line price to default in from the the item table.
Created the query and generated the form & subform - on screen, the substitution works, the PO line price does get picked up from the Item table, but the PO Line table does not update with this value.
Is there a soltion to this?
Any assistance gratefully accepted
View 14 Replies
View Related
May 17, 2006
Cant find what I am looking for on the forum so if anyone can help me or tell me what to search for that would be great...
I need one of my forms to display a running total of updated records, but only those records that the user clicks a command button on. i.e if i have a recordset of n records each time I move to the next one (by clicking a command button) I want the control on the form to display the count of those records that have been updated only.
I am assuming I would need to add some code to the after update event of the form or on click event of the command button but cant really figure out what code to write.
Any pointers?
View 3 Replies
View Related
Apr 27, 2006
New here, looks like a great resource.
I have a question about a form which has several fields on it. What I need to do is to capture the ALL the fields of the record I just entered(updated or inserted)
So, for example, if my form has fields for
RepID, RepName, Company
After I edit or insert a new record, when I click to the next line, is there a way I can use AfterUpdate event to capture ALL the fields that were just updated on the form, and do whatever it is I need to do with them? I hope I am amking myself clear. Thanks for taking the time to look.
View 6 Replies
View Related
Jul 12, 2015
I have created a form with two subforms within it.
The TOP subform enables the user to view a specific record (not change it)
The BOTTOM subform enables users to view a datasheet form of all the records and amend them where necessary.
I want the TOP subform to automatically go to the last updated record, meaning that if the user changes the data of a record in the BOTTOM subform it will automatically display the last record on TOP that was updated in the table.
I've looked at the macros available and it only allows me to 'GoToRecord' to either Last, Previous, New etc... Is there any way to go to 'Last modified in the table'??
View 7 Replies
View Related
Jun 16, 2014
I have a form and a subform based off a query, I am trying to run a SQL update statement from one of the fields in my subform. I know what fields in my table i want to update but the Where part of the statement is what i am having a issue with.
DoCmd.RunSQL "UPDATE [Daily Work] SET [Daily Work].QC_Start_Date = Date(),
[Daily Work].QC_Start_Time = Time() WHERE ((([Daily Work].CUS)=[Forms]![QC_Queue_Qry Subform]![CUS])
AND (([Daily Work].LN)=[Forms]![QC_Queue_Qry Subform]![LN]) AND (([Daily Work].Note_Date)=[Forms]!
[QC_Queue_Qry subform]![Note_Date])))"
What this is trying to do is once the the field is updated i want to set the date and time of that record in my table, basically I am trying to time stamp the record when the field in my subform in updated.
View 4 Replies
View Related
Oct 11, 2006
I have a form which allows an individual to add a cylinder record, i would like to validate the form in the sense that if the cylinder has already been added into the table it cannot be added again. So once the cylindernumber has been typed within the text field and the add button is clicked, the cylinder number typed is checked against the table if it has already been added a meesage should appear not allowing the user to enter a clyinder that is already added. I ahve tried this with the following code (the coding in red was already generated by adding a command button "add" to the form. The message i am recieving when the cylinder number in the textbox matches the cylinder number within the table is "you cant go to the specific record". I think my coding must be in the wrong order and IDEAS!!!!!
MyCode:
Private Sub Command39_Click()
On Error GoTo Err_Command39_Click
DoCmd.GoToRecord , , acNewRec
Exit_Command39_Click:
Exit Sub
Err_Command39_Click:
MsgBox Err.Description
Resume Exit_Command39_Click
Dim db As DAO.Database
Dim rs As DAO.Recordset
Dim StrSQl As String
Set db = CurrentDb
Set rs = db.OpenRecordset("SELECT * From tbl_CylinderMaster Where [Cylinder Serial Number] = '" & Me![Cylinder Serial Number] & "'")
If Me![Cylinder Serial Number] = [Cylinder Serial Number] Then
MsgBox ("This Cylinder Number has already been added please add another")
End If
End Sub
View 2 Replies
View Related
Aug 23, 2004
Is there code that will add a new record? I was told that the code that I am using does not actually add a new record to my form.
Here is my code:
Private Sub cmdNew_Click()
On Error GoTo Err_Ctl_New_RMA_Click
On Error GoTo Err_Ctl_New_RMA_Click
DoCmd.GoToRecord , , acNewRec
Exit_Ctl_New_RMA_Click:
Exit Sub
Err_Ctl_New_RMA_Click:
MsgBox Err.Description
Resume Exit_Ctl_New_RMA_Click
End Sub
DoCmd.GoToRecord , , acNewRec
Exit_Ctl_New_RMA_Click:
Exit Sub
Err_Ctl_New_RMA_Click:
MsgBox Err.Description
Resume Exit_Ctl_New_RMA_Click
End Sub
View 2 Replies
View Related
Jan 25, 2015
I am new to Access and I was trying to create database for chemical inventory handling.I have two tables. one of my tables (chemical info) has information on chemical properties. I used "Cas NO" as primary key. I have another fields such as "chemical name", 'product number" and etc.
In Second table (chemical inventory) i have "ID" field as primary key and I used lookup wizard in order to fill "Chemical Name" field. I thought it will be easy to pick up name rather than typing it because the names were complicated.After I created two forms. one form is chemicals info form based on chemical info table and other one is LAb_inventory based on chemical inventory table.
I set up Lab inventory form as main form and Chemicals info form as subform. Linking field is chemical name. So that when I chose chemical name from combo box i can see inventory data in main form and chemical properties information in subform. Now i have two problems..One of them is when I add new record to my subform I cant see this new record in main form. I suppose it is because chemicals names of each form is derived from different tables. furthermore in main form instead of chemicals name i see "my primary key CAS NO".
What i want to achieve is add new record to chemicals info form and fill up all chemical information save and in the main form to add new record choose new chemical name which i just added and fill up inventory information.
View 1 Replies
View Related
Jan 25, 2015
I am new to Access and I was trying to create database for chemical inventory handling...I have two tables. one of my tables (chemical info) has information on chemical properties. I used "Cas NO" as primary key. I have another fields such as "chemical name", 'product number" and etc.
In Second table (chemical inventory) i have "ID" field as primary key and I used lookup wizard in order to fill "Chemical Name" field. I thought it will be easy to pick up name rather than typing it because the names were complicated.After I created two forms. one form is chemicals info form based on chemical info table and other one is LAb_inventory based on chemical inventory table.
I set up Lab inventory form as main form and Chemicals info form as subform. Linking field is chemical name. So that when I chose chemical name from combo box i can see inventory data in main form and chemical properties information in subform. Now i have two problems
One of them is when I add new record to my subform I cant see this new record in main form. I suppose it is because chemicals names of each form is derived from different tables. furthermore in main form instead of chemicals name i see "my primary key CAS NO". What i want to achieve is add new record to chemicals info form and fill up all chemical information save and in the main form to add new record choose new chemical name which i just added and fill up inventory information.
View 6 Replies
View Related
Aug 2, 2006
I have a database with three tables
table 1 (form1)
reference (PK) auto number
table 2 (form2)
Reference (fK)
workbook reference (PK) auto number
Table 3 (sub form within in form2)
Reference (FK)
workbook reference (fK)
data Reference (pk) auto number
Each table is a form that is linked via the keys. On form 1 i have a button that is to open the form2, which it does but every time i open the form a new record is added. Why and how do i prevent this.
Then what i want to do is add a button for a new form on table 2 form but use the same reference as the record as presently displayed. How do i add new record using the same Reference but new workbook Reference?
Thanks is advance
View 1 Replies
View Related
Jul 22, 2007
I have a form in continuous forms mode...
Each entry is something the user is supposed to check on once and hour and update.
I have a "Last updated" field.
Now() goes into that field every time the record is updated.
I have a querry that will show the users records that are over an hour old.
How can I get Access to pop-up a window or something to alert the user they need to look at something? It would be really nice if Aspect would start blinking in the task bar or something.
Thanks!
View 5 Replies
View Related
Jul 20, 2012
I have taken the Access Tasks template and modified a bit. It now captures and saves the time and date a record is modified. The database is on a network folder and is shared among our team users.What I would like to do next is make it,
1- capture and record on my Tasks table the user name of who created the record by using the fOSUserName() function. I have the table fields "Created by" and the VB code in a module. This would happen only once when the record is created.
I would also like to do this with the machine name for which I have the module too. fOSMachineName()
and,
2- capture and record the user name of who modified a record. For this I also have a field in my task table "Last Modified By" and i hope i can use the same fOSUerNmae() function.
I got to the point where I put an unbounded text box with the =fOSUserName() in it and it does show the user name but how do i get to record to my task table?how the template removes the tasks that are completed from the task list as soon as it is updated to completed? how can I make this happen with a cancelled option after I add it to the drop down list?
View 3 Replies
View Related
Oct 27, 2005
Hey everyone, This seems like a great community for access - I'm glad I stumbled across here because I have some issues that need figured out.
I've searched the forum for answers and I have found a few posts with suggestions, but nothing has worked yet. (by the way, I'm fairly new to access, but not to databases in general).
So here's my problem, and I appreciate any help in advance.
- I have a main form and 2 subforms on the main form. The main form contains the information of thousands of Titles to different sections of land. The one subform then has multiple "requirements" per Title. So i have a many-1 relationship between the requirements and titles. On the main form, there is an edit button - so everything is locked until the user hits the edit button, and then the main form becomes editable. The requirements subform does not - it stays locked even though in my code I have "Me![Requirements Subform].Locked = False"
But this is not my main concern right now. What gets me is that I can not add a new record from the requirements subform. For example, Title 1 (T-0001) has 11 different requirements. I can use the navigation to browse through the requirements but I can not add a new requirement from the navigation buttons. This is a main concern.
Another main concern is that when I add a new Titles record from the navigation buttons, my requirements subform disappears from the form.
I hope I explained my situation clearly! if anyone needs any clearification, let me know.
Thanks again,
Brandon
View 5 Replies
View Related
Nov 6, 2013
I have limited experience in Access, but I have managed to create a user form, where items are selected from comboboxes (Test results; when, who, outcome, etc)
At the end I have built in a command button that should add a record to an existing table, but so far no luck. I have used the following VB code for this:
Private Sub Save_test_results_KeyPress(KeyAscii As Integer)
Dim dbsICT_Test_Management As DAO.Database
Dim rstActual_test_results As DAO.Recordset
Set dbsICT_Test_Management = CurrentDb
Set rstActual_test_results = dbsICT_Test_Management.OpenRecordset("Actual_test_ results")
rstActual_test_results.AddNew
rstActual_test_results.Update
End Sub
View 6 Replies
View Related
