Modules & VBA :: Generate Report For A Test And Answer Sheet - Setting Title?
Oct 15, 2013
I'm using VBA code to open a query, generate a report for a test and an answersheet. I'm using the same report, and don't want to make many reports. I have the below code which runs my query, and generates the reports.
Private Sub Command2_Click()
DoCmd.SetWarnings False
DoCmd.OpenQuery "1", acViewNormal, acEdit
DoCmd.OpenReport "WrittenExam", acViewPreview, "", "", acNormal
DoCmd.OpenReport "WrittenExamAnswerSheet", acViewPreview, "", "", acNormal
End Sub
I have a need to be able to set the report title for both reports when running my code.
my issue is i have multilble text box in my form & based on change in one of this text box i need the code to compare between data in the form & table & returm Msg if it is not matching. attached screen FYI.
i look in the internet but i could not figuer out the VBA code since i do not know VBA. what comes to my mind to to use select case.
I am running an Access 2003 report that outputs to an Excel Spreadsheet The parameter query has two paramerters First Date and Last Date. The report runs from an Button OnClick event. I need to include the two dates in the 'name' of the spreadsheet as below
Private Sub btn_report_between_dates_Click() DoCmd.OutputTo acOutputQuery, "qry_all_calls_between_dates", acFormatXLS, "Calls By Between Dates " First Date" and " Last Date" - Date Report Run " & Format(Date, "dd-mm-yyyy") & ".xls", True End Sub
(btw I know it is preferable to use the TransferSpreadsheet method, but I've not got around to that way yet)
Is it possible to generate a report from 2 listboxes?
I have attached a pic of what I am trying to accomplish. I am wanting to have a report open with only the criteria that a user selects from the listboxes.
listbox 1: User selects a case number(s)
listbox 2: User selects the fields they would like in the report
So, if the user selects:
Case number: 13-001
Then selects fields:
Allegation Incident date Focus_Last name
This report would be:
Code: Case Number Allegation Incident Date Focus_Last Name 13-001 DUI 06/01/2013 Doe
I'm populating a report with a query which pulls criteria from a form. When the 'run' button is pressed it opens the report, running the query, to filter the data. What i'm attempting (and it works if there is data present).
The data is text, which is a filename, which populates an image control. Most of my records have an image present but for the ones that don't I think I need to turn the image control's picture property to 'blank'.
I'm just now encountering problems with the records with no pictures so when i came up with this it worked with my tests which at that time only had images present....
I have two problems.
1) When I run the code as below i get Run-Time Error 2185; you can't reference a property or method for a control unless the control has the focus.
2) when i try to set the focus on the picture control in the report to see if there is text/value present i get runtime error 2478; database doesn't allow you to use this method in the current view.
I assume this is talking about me opening the report in acViewPreview mode but i thought i needed to do this so the images are displayed in the image control.
Code: Private Sub Detail_Format(Cancel As Integer, FormatCount As Integer) Dim strDBPath As String Dim strRelativePath As String Dim strPath As String 'rptOriginalOwnerCategoryItem!Picture.Text.SetFocus [B]Me!Picture.SetFocus[B] 'Test to see if the record has a relative path stored
I have a report, on a control tab, on a main form.
On the form are two buttons: one to show all items, and one to filter them based on a boolean field called showitem.
The buttons work with the code below.
What I want to do but cannot seem to figure out is to have the report default to no filter.
The bound query has no criteria.
I'm trying to set the filter property via the on open or on load event and even if I isolate the report, cannot seem to reach it.
Code: Private Sub b_hide_items_Click() Me.Profile_Timeline_wNotes_subreport.Report.Filter = "timeline.showItem <> 1" Me.Profile_Timeline_wNotes_subreport.Report.FilterOn = True Me.Profile_Timeline_wNotes_subreport.Requery End Sub
Private Sub b_show_all_Click() Me.Profile_Timeline_wNotes_subreport.Report.Filter = "timeline.showItem = 0" Me.Profile_Timeline_wNotes_subreport.Report.FilterOn = False Me.Profile_Timeline_wNotes_subreport.Requery End Sub
I need to import a .csv file into a table. The problem is the top title information is on the file, like below. I do not want to import report name, report date, include rows, number of rows, and the blank space. I need to start the import on the header row. This looks fine in excel of course, but when i need to import it into access, there is no need for it. How do i either strip that out during the import or skip it.
sample csv file:
---------------------------------------------------- Report name: xxxxxx Report date: xxx Include rows where..... Number of row: xxxx
date,firstname,lastname,dollar,address,text 10/4,john,smith,888,12 w st,, 10/4,jane,smith,7575,34 w st,,
I am using the built in Access macro editor to run a number of reports which are called for arguments sake ClientPartA, ClientPartB etc..My macro so far simply opens on a button click each of these reports and populates a number of text fields (all this is working fine)
Where my problem lies is I then want to export each of these reports to a central network location "L:Operations DatabaseProjects1042Outputfile. I have been using the command 'ExportWithFormatting' and have filled out the macro element with;
Object Type: Report Object Name ClientPartA Output Format: PDF Format (*.Pdf) Output File: L:Operations DatabaseProjects1042Outputfile Auto Start: No Template File (no info) Encoding (no info) Output Quality Print
Now all my data is pulling from a form called 'Client' and the field 'RecipientsAccountNumber'..I thought I would be able to export the file(s) as PDF with the output file being written as;
saving the form to the named directory as '300300300 - ClientPartA'..What in reality is happening is it's saving the file to the named directory not as a PDF and with the file name of 'Forms![Client]![RecipientsAccountNumber]
I have a form with command button, when clicked it displays My report in Preview. I want to change the report title whenever i click a button from the form. I believe it is to do with VBA and am new in that.
First post in this forum. I am using office 2003 pro. I have an Access database that I would like to change the title of. I would ilke this change to be applied to forms, reports and tables. I have done this in the past but can't recall how to do it.
I would like to display the value of my parameter query into the title of the report.How could I do this on Access 2007?So far I have made another field in the query and called it ParaDate: [JobDate]
I have been trying unsuccessfully to transfer about 20 details describing the name, up to 14 different colours, prices etc and one image of beads from the details displayed on a form to a report. I have no problem displaying the details of one bead using a combo box but then I want to send these details to a report. After that I select another bead and then want to send these details to the report.
The report is divided into 12 rectangulars to represent 12 sections of a display box. This tells the shop owners which beads to put in which section as display is important for sales. as there wooden beads, glass beads, plastic beads animal beads, letter beads etc, etc.
I have gone into this details so you will understand what I am trying to do. I would be very grateful for help but I am sure will realise that I am technically inept and please when you try to explain things to me to remember you are dealing with an idiot.
I have an access report that there is One column among 9 of them, refuse to give answer.. Its suppose to Sum all the total of each line in the column. See Attachment. This report is group by ID and sort by Shift. The formula is: Sum([Rates]), and the Rate is list in Details Report where the Sum ([Rates]) is located in Id Footer section.
FYI, when I ran this report, it does not know what the Rate is. However, the rate is the formula which listed accordingly in the report details.
I have been trying to create a report to count equipment tested between two dates:
I am using Access 2000 (old I know) and I have 21 different tables with the fields laid out the same. For the moment, I will list five of the tables: Servers, Laptops, Printers, Workstations, and Monitors. The criteria I draw from each table are the fields Model#, Part#, Serial#, Test Date, Retest Date, and Technician.
I can create a report from a query (say laptops). The criteria I is BETWEEN[Enter Start Date]AND[Enter End Date] under the TEST DATE field. Works great! In my report I use =Count(*)&" "&"Unit(s) tested" & "Between "&[Enter Start Date] & " and" & [Enter End Date].
That works great too.
I am trying to create ONE REPORT using ONE Date range and display how many units were tested:
Example:
Units Tested between March 1, 2014 and March 31, 2014
If I can get these five tables, hopefully I can add additional tables to the same report as I need them. I am not savy with VB code, but will give it a go with some direction as to where to put it and how to add to it.
I can change the application title using the following only if the Application Title is blank. If it is not blank then it does not change.
Code: Dim db As Database Set db = CurrentDb() Dim newtitle newtitle = "qwerty" Set newtitle = db.CreateProperty("AppTitle", dbText, strNewTitle) db.Properties.Append newtitle Application.RefreshTitleBar
Hope someone can give me some pointers. I have a report for a delivery ticket this prints customers address + delivery ticket number. Below this heading it list all the items associated with that delivery number.
What I would like to have it do is print one copy of the report on the top half of an A4 sheet of paper and then Print the same copy on the bottom of the A4 sheet.
This would give me top half copy as delivery copy and bottom half copy as customers copy. The sheet would be perforated across the middle to allow the driver to tear the sheet in half and leave the customer with their copy.
I'm having problems creating a second subfolder in the main folder.
The main folder is used to keep inside the reviews of clients inside.
The code I have now, will only create a main folder if it does not exist and then a subfolder with the BIN nr, type review and date. If the client would have a diferent ones and in diferent years. So if it has first "Prototype Model", the next one could be "Prototype Review". The part of the code that checks if the main folder exist works, but how to let the code create in the main folder the second review subfolder? Please see below code I managed so far:
Code: Private Sub btn_Create_Folder_Click() 'XXXXXXXXXX working onXXXXXXXXXXXXXX Dim path1 As String Dim path2 As String path1 = "C:Test_FolderMedium" & Me.BIN & "_" & RTrim(Me.LE_Name) & "" path2 = "C:Test_FolderHigh" & Me.BIN & "_" & RTrim(Me.LE_Name) & ""
I have an Access form that gathers students test scores on Reading & Writing exams. Depending on those scores, there are five possible classes for them to be assigned.
I have the intervals worked out, and have created a table that contains the min reading, max reading, min writing, max writing, and class they belong in.
The scores are entered into a form as scoreReading & scoreWriting (integer)
I'm trying to figure out the best way to pull and compare the values and return the proper englishPlacement text. Its set up this way because there are multiple tables to pull from, depending on the date of the exam. Each table has different ranges for each Eng1,...,Eng5.
I'm thinking perhaps to iterate through each column and evaluate T/F, then return the englishPlacement value of the correct row. I'd like to keep this stuff in the VBA so that the code to select a table based upon date doesn't break when the intervals inevitably change requiring an additional table.
I want generate and load the report using vba when a command button is clicked . (automating the report generation) For example i have table in access that has name, address and email fields and onced command button is clicked the report is generated and loaded.I be happy if some one show me wprking example.Thanks
I have the following very general question, but I hope you can give me a few hints so I can start and find things out on my way.
I just created a database which via VBA procedures runs all kinds of queries and puts the results in tables, for instance I have about 20 tables now with 10 fields each and for every table I want to run the same type of report. I already made one report for one table via the report wizard, I would like to use the layout of this table for all other tables using a VBA code, so when I run this code it will create all these reports for me. What is the best way to start?
I'm having trouble with my VBA module.I have a random test generator which pulls records based on a category from my table into a temp table using a make table query. I use the following code:
Private Sub Command2_Click() DoCmd.SetWarnings False DoCmd.OpenQuery "1", acViewNormal, acEdit DoCmd.OpenReport "WrittenExam", acViewPreview, "", "", acNormal Reports!WrittenExam.lblTitle.Caption = "Exam Name" DoCmd.OpenReport "WrittenExamAnswerSheet", acViewPreview, "", "", acNormal Reports!WrittenExamAnswerSheets.lblTitle.Caption = "Exam Name - Answer Sheet" End Sub
My querry makes the table, and then generates two reports (my exam, and the answer sheet). I'm getting an error 3211, saying the temp table is already in use by another process when trying to generate both reports. I used a Macro before, but I have a need for custom report headings, so I'm using VBA.
i have two combo box, one is cboMonth and one is cboYear. i am trying to get the values from these 2 combo box, and used the value to generate report. however, when i click the btnPrintSummary button, system keep prompting me to enter parameter value.
Code: Private Sub btnPrintSummary_Click() Dim stDocName As String Dim stWhere As String Dim blnTrim As Boolean
Fields will include: TransactionDate ProductID ProductName UnitPrice Quantity SubTotal Total AmoundPaid Balance
The subtotal= unitPrice*Quantity Total = Addition of all subtotal AmountPaid = How much each customer paid Balance = AmountPaid - Total
fields the TABLE should contain? (Remember customers will purchase more than one product & there will be more than one reciept)..How I can generate a REPORT using a FORM ? The REPORT should contain the calculations. How do I make access do the caluclations?
