Modules & VBA :: Get XML From A Site And Import Data To Access
Dec 4, 2014
I get XML's from a site and want to import the data to Access. If I use the native import then I get multiple tables and the data is a little jumbled. For instance: I get 1 table with track names and a different table for track numbers with no way to relate the to accurately. I would like to be able to parse out the XML and have it update my table as it goes so I have less "junk" in my DB. I just can't figure out how to call out the XML tag and tell it to copy that info to the correct field.
View Replies
ADVERTISEMENT
Nov 6, 2014
I have a text file that details every single incident that happened in the system. This means that it is extremely messy and non-comprehensible to a normal person due to the use of codewords and all.
Is it possible to scan through the document and insert the data into access, such that the different keywords are put as seperate events?
Ps, the number of characters between each event and data may not always be the same, so seperating them by that is not the way to do it. However, when I open the file in notepad++, I can confirm that each event is 6 lines.
E.g. Line 1 = Event timestamp, Line 2 = Event Name, Line 3 = Acknowledged or not, Line 4 = Acknowledged by who, Line 5 = Event Details, Line 6 = Application Owner.
Basically, the 6 lines are the 6 columns that I would need in my table. So, is it possible to separate out and read every 6 lines of data in the text file?
View 14 Replies
View Related
Dec 18, 2013
I 'm downloading the excel data from the site and connecting it to access.
In excel the particular column (Time Taken) is in the format of "00:12:26".
After connecting it to access and appending it to the table, the format changed to "12:12:26", the first two digits changed to "12" and the remaining are as it is how it looks like in the excel. I need to change it to format what it looks like in the excel.
View 7 Replies
View Related
Aug 20, 2004
I want to build a web site that people can access over the internet. I want the user to have the ability to run one of my Microsoft Access databases just as they would if the database was loaded on there PC. Is Microsoft Frontpage the answer or do you have any other recommendations of a web building software package?
THANK YOU IN ADVANCE - jOHN
View 1 Replies
View Related
Aug 23, 2014
I want to import data from a webpage using VBA and then store the HTML contents in a table (well, actually just part of the contents in fact).
View 7 Replies
View Related
Dec 29, 2006
Hello All
I am doing an assignment, which is fantasy football database and instead of entering the data i thought could i import the data from say another site which is updated regularly. Can it be done with VBA Access also wanted to link the database to a apache server. Any pointers on how to do this would be appreciated or if it is feasable. Have to have assignment in before Aprial.
John
View 1 Replies
View Related
Nov 26, 2013
I am using the follow code to import data from a Word form into my MS Access 2010 DB:
Code:
Set dbs = CurrentDb
Set rst = dbs.OpenRecordset("tmpSIRs", dbOpenDynaset)
With rst
.AddNew
[code]...
On the Word Form, these two fields are drop-downs with three options: blank, No, and Yes. If the users leaves them blank, then Access ignores them--which is what I want. However, if the user says yes or no, Access puts a "-1" in the database. Both the Word form and Access field are text.
View 2 Replies
View Related
Jul 11, 2013
I have a fill-in pdf form, with fields that match database table fields. My database is in SQL, but I use Access for the forms and reports.
The users will go on-site (and be offline), fill out the pdf forms a bunch of times and come back with a folder of them.
I am looking for a way to have a form where a user can choose a folder (maybe on an access form) and say "import PDFs" and then have all the data in the PDF forms import to the table. A lot of other stuff has to happen in that process (checking the project number on the form, assigning an ID tag for that item, etc).
View 3 Replies
View Related
Sep 1, 2014
I have excel, which i want to import in Access, but i need data type to get changed as text when imported, how can i do that?
View 2 Replies
View Related
Apr 8, 2014
Looking for (semi) generic piece of code that knows how to handle (semi) random XML files and structures, preferably creating tables and columns on the fly...
Or some code that will read an XML tree and genericaly will add the data to the tables it can find?
View 2 Replies
View Related
Aug 20, 2014
I am trying to automate the function that imports Infopath (.xml) data into access tables. I can have a button run the MenuCommand, but then the users have to go through all of the prompts and I just don't trust them enough to do it properly.
All I want is the user to click a button, then it lets them browse for the desired file and then imports it.
View 1 Replies
View Related
Apr 24, 2014
I have a requirement to create a piece of vba that will open all xlsx files in a folder one at a time then import the data in a range (sheet1!A1:G14) into a table named Weekly Input.
View 4 Replies
View Related
May 24, 2006
Dear all,
Does anyone know if ti is possible to link an access table to one stored on an intranet site? This is used for logging help desk calls and various locations need to look at it at the same time.
I have tried it and seems to work but I get a "Not a valid file name" message
thanks for looking
View 1 Replies
View Related
Jul 18, 2013
I'm trying to import an excel file that includes a column of Part Numbers that I am interested in. I am trying to import that excel file into an access table called 'TableForImport'. That table has a column called 'PartNumber'. Thing is it's not just one Excel file that I am uploading...although I am uploading one file at a time. So the column name for each excel file table is different but they all have one column for the Part Numbers that I am interested in.
My code won't allow me to import the excel file into table 'TableForImport' unless they have the same column name! They never will! How do I accomplish my task without editing the excel file information? Here is my code:
Code:
CurrentDb.Execute "CREATE TABLE TableForImport " _
& "(PartNumber CHAR);"
DoCmd.TransferSpreadsheet acImport, acSpreadsheetTypeExcel12Xml, "TableForImport", Me.ExcelInput, True
View 8 Replies
View Related
Nov 5, 2004
I want to import data from access to excel my excel file has columns say
a b c d e f g h i j k
my access table has columns
b d e f g i k
now when i run transferspreadsheet, since some columns are not there in the access table, it gives a error. how can i import this data?
View 14 Replies
View Related
May 5, 2015
I have 4 csv files, that need to be imported into Access.
1. I'm building 4 linked tables so users can update the table as needed. Then run queries based on these tables to produce report. But maybe there's a better way? the file name and location might be dymatic, so anything like 'getopenfilename' would be easier instead of linked tables?
2. These data need to be clean up first to become a 'database table'. (Delete first 2 rows, delete some columns, remove duplicates etc.) I know how to do them in VBA Excel, but never used Macro in Access before.
View 2 Replies
View Related
Dec 18, 2013
I have some data in an array that I need to normalize, remove duplicates, and import.
Original Table
Every record in the array has a person, all but a few have an address, most have a phone, and some have an email.
Person----- Address ----- Phone ----- Email
Tom ----- 10 A Ln ----- 789... ----- e@a
Sue ----- 20 B Ln ----- 256... ----- _____
Sam ----- 30 C Ln ----- _____ ----- _____
Dan ----- 40 D Ln ----- 478... ----- _____
Jan ----- 40 D Ln ----- 567... ----- e@d
Stu ----- 50 E Ln ----- _____ ----- _____
Syd ----- ______ ------ 224... ----- _____
New Data Structure
I want to group the data by HouseHold; which Address will serve to define for this import.
tblHouseHold
hhID
tblAddress
adrID, hhID, Address
tblPerson
prsID, hhID, Person
tblPhone
phnID, hhID, Phone
tblEmail
emlID, hhID, Email
I've been working on a procedure to step through the recordset and add the data one record at a time so I can get rid of the duplicates.
I've tried a few approaches, but this is where I'm at now.
Code:
Dim rs As DAO.Recordset
Dim rsHH As DAO.Recordset
Dim rsPhone As DAO.Recordset
Dim rsEmail As DAO.Recordset
Dim rsAddress As DAO.Recordset
Dim rsPerson As DAO.Recordset
Dim db As DAO.Database
Set db = CurrentDb
[Code] .....
View 2 Replies
View Related
Mar 27, 2014
I'm trying to design a command button on a Form so the user can import the contents of an Excel spreadsheet to an existing Table in Access with the click of a button. But, i'd like the imported data to overwrite the existing data in the Table and not append to it. I've considered using linked tables but apparently you can't set Primary Keys when you do it this way.
View 4 Replies
View Related
Jul 16, 2014
I am creating a ImportExportData macro that will link to my tables in the BE
However the BE has a password. I was told this would require coding.
I have even tried to 'convert macro to VB' and i get this:
Code:
DoCmd.TransferDatabase acLink, "Microsoft Access", "c: est.accdb", acTable, "Table1", "Table1", False
I then tried to enter the password in the last segment (StoreLogin) ie:
Code:
DoCmd.TransferDatabase acLink, "Microsoft Access", "c: est.accdb", acTable, "Table1", "Table1", False, "PASSWORD"
but that didn't work either, i got a "An expresiions you entered is the wrong data type for one of the arguments"...
View 2 Replies
View Related
May 12, 2015
I am attempting to split my Access Database and will upload the back-end portion to a SharePoint site. No matter what I do, I continue to get a "Not a valid file name" error.
View 1 Replies
View Related
Jan 16, 2015
I'm simply trying to import a csv file into Access regularly using this code
Code:
Sub Command0_Click()
'import from text file
DoCmd.TransferText acImportDelim, , "test", "M: estR.csv", "-1"
End Sub
The error I'm getting is attached in the word doc. What that weird symbol references..
View 1 Replies
View Related
Jun 6, 2014
I'm stuck on a step where I want to import an excel worksheet into the msaccess like we do normally. I do not have any data inside, it's just the header I will be importing. The data will be feeded by other forms based on some selections. My requirement is the "Default value" of each field should be set to 1 as we see in the property of a table in design mode.
The data would be updated later for some fields via macro or commands, but the fields were nor touched should be set to 1 (Value).
View 4 Replies
View Related
Apr 12, 2014
I've written a vba macro that takes data from Excel, processes it into an XML file & then imports into Access.All fields were fine apart from the date field, which appeared in the Access table as "00:00:00"...The date in the XML was appearing as 01/01/2014.
Code:
dateTemp = [date here]
xmlFieldElement.Text = Year(dateTemp) & "-" & Format(Month(dateTemp), "00") & "-" & Format(Day(dateTemp), "00") & "T00:00:00"
This produces 2014-01-01T00:00:00...Note, putting the date into reverse order without the formatting also causes the import to result in 00:00:00
View 1 Replies
View Related
Jan 15, 2007
When I try to import from a spreadsheet, Access crashes. No errors, no error log entry. At first I thought it was because my file was password protected, so I tried a new file with no password, but it still crashes Access.:confused:
View 2 Replies
View Related
Aug 8, 2007
Hi all
I've searched everywhere for a solution to this problem....and every site I come to has numerous examples of how to save Outlook Contact data into a database, but nothing on how to automatically store info from forms into Access table.
So, I assume the code will be in Access. When you run the macro it will look in a certain email folder, return all of the data within the forms in that folder and store it into an Access table.
Does ANYBODY know how to do this? I thought it'd be a much more common problem than it appears to be??
Or am I just being stupid :confused:
Thanks for your help! :)
View 3 Replies
View Related
Apr 27, 2008
Hello guyz,
With the help of 'Import External Data' wizard, my import did not happen. My datatypes and Col. Headers in excel are matching for what I have in access table. Alternatively, I selected to import the data into new table and all of the data got imported. My question, since I already have some data in table I want data to be imported, how can I do about bringing all the data from new table I created during import to the existing table. Please suggest. Thanks in advance.
View 3 Replies
View Related