Modules & VBA :: Getting Error 2450 When Click Access Close Button To Exit
Dec 17, 2014
Getting error '2450' when click Access close button to exit.
Run-time error '2450': ECN cannot find the referenced form 'frmLogin'.
Note: After login my login form is visible to, cause to get login user id into "frmECN" Form. But When I'm in "frmECN" Form and enter data then close to exit Access main close button I'm getting 2450 error.
View Replies
ADVERTISEMENT
Apr 1, 2014
I'd like to create 'Exit Microsoft Access' Button.
In Command Button Wizard which action I should use to get it right? and finally in the properties should go to 'on click'?
View 4 Replies
View Related
May 19, 2015
I am getting an error msg when i get to the line "Set frm = Forms(vFormname).Form". Error 2450, cannot find the referenced form...
'Code:
Dim frm as form
' Check If saved dynamic field exists
SqlStr = "Select ReportListID, DynFieldName, DynCalc, FormName, UserName From DynFields Where UserName = '" & GBL_Username & "' AND ReportListID = " & projectid
Set rs = db.OpenRecordset(SqlStr, dbOpenDynaset, dbSeeChanges)
If rs.EOF = True And rs.BOF = True Then
GoTo Exit_DynamicFieldCreator
[Code] .....
View 1 Replies
View Related
Apr 3, 2014
In short, here is what I am trying to accomplish:
1. I have a two-tier, tabbed Navigation form (Menu-Main).
2. One of the second-tier tabs opens a form (VendorMain) which displays a Datasheet based on [Query.Vendor_Query]
3. VendorMain contains a Command Button (EditButton), which calls a subform (VendorForm) used for editing.
4. Upon saving the edits, VendorForm's OnClose event is supposed to Requery the datasheet on VendorMain, so the edits are reflected when the user returns.
I have tried over a dozen different permutations of the following, but nothing seems to work:
Me!Parent.Requery
Forms!VendorMain.Requery
Forms![Vendor_Query].Requery
Forms!Main-Menu!VendorMain.Requery
Etc...
VendorForm opens, edits, saves and closes perfectly. However, I consistently get the following error and the parent form is not requeried:
Runtime Error 2450 - Cannot find the referenced form VendorMain
Code available upon request.
View 4 Replies
View Related
Sep 22, 2014
I have a button which runs a list of queries that take roughly 10 seconds to run, when another user clicks the button while the other one is running it gives and error message 3405, File already in use.
View 1 Replies
View Related
Apr 27, 2014
I have a access program and recently I began getting this Error out of the blue . I really need to fix this error because it shuts down my entire program . When I go to save a pic like i always do and it will not recognize the "quote Main ".
Code:
Forms![frm_Quote_Main]![HousePicture] = Me.PicSave
Forms![frm_Quote_Main]![ZoomValue] = Me.ZoomValue
Forms![frm_Quote_Main]![GoogleZoom] = Me.GoogleZoom
Error I receive
Runtime access error 2450 ............. ? Capture2.PNG
Capture.PNG
View 4 Replies
View Related
Aug 3, 2013
In the main form I have a list box, when I right click on each item on list box another form "frmshortcut" (pop up) will be open in the position of mouse that shows a list box for selecting items according to below code, now I would like when select another place (except "frmshortcut"), this form automatically will be close, like what we have in shortcut list of windows. Now when right click it is opened in the location of mouse click, but problem is, it is not closed automatically when click in other places of main form.
Option Explicit Private Type POINTAPI
x As Long y As Long End Type
Private Declare Function GetCursorPos Lib "user32" (lpPoint As POINTAPI) As Long
Private mp As [*clsMousePosition]
[Code] ....
View 1 Replies
View Related
Jun 23, 2015
I have a database that had some code that enabled the user to click a button and it would take information from one Access query or table and paste it into specific locations in Excel. This is important because the last worksheet has specific formatting in place.
If it didn't, I'd just use the transfer spreadsheet option and not even bother opening Excel at all with code.
I've got it working well except for the last part. The last query being copied has eight records and only one is being sent to Excel. Same code as the other queries where all of their data is going to the right spot in Excel with the right number of records.
Private Sub AM_Top_25_Click()
DoCmd.SetWarnings False
DoCmd.OpenQuery "delete_ShortPartItems", acNormal, acEdit
DoCmd.OpenQuery "append_to_Short_Part_Items", acNormal, acEdit
[Code] .....
View 3 Replies
View Related
Mar 8, 2013
Access 2010. I've created a database on my thumbdrive and I'm now wishing to place it on our network for multi-users. In copying/pasting the database the the network drive I'm getting the following error message when either trying to Compact and Repair and/or just simply close the darn thing.
Error message:You can't exit the Microsoft Access now.If you're running a Visual Basic module that is using OLE or DDE, you may need to interrupt the moduel.
View 7 Replies
View Related
Jan 6, 2006
I have a continuous form, with data entry fields in both the form header and the detail section.
I've attached an "On Exit" event to the ProdQty field in the detail section. The prime function of the event code is to run an update query on the table (which is the data source for the form).
The code executes properly (update query runs successfully and form refreshes) when I Tab out of that field. It also executes properly when I use the mouse to click on another field in the detail section.
However, when I use the mouse to click on a field in the form header or form footer sections, the On Exit code does not execute properly.
Here's the On Exit Sub:
Private Sub ProdQty_Exit(Cancel As Integer)
On Error GoTo ProdQty_Error
If (Int(Me!ProdQty) <> Me!ProdQty) Or ((Me!ProdQty / Me!LDU) < 1) Or (Int(Me!ProdQty / Me!LDU) <> (Me!ProdQty / Me!LDU)) Then
Me.ProdQty.BackColor = 255
Me.ProdQty.ForeColor = 16777215
Beep
MsgBox "The quantity you entered is invalid for this product." & vbCrLf & vbCrLf & "Please check the LDU (least divisible unit) and enter a new quantity.", vbExclamation, "Quantity Error"
DoCmd.GoToRecord acActiveDataObject, "Order Form", acPrevious
DoCmd.GoToRecord acActiveDataObject, "Order Form", acNext
DoCmd.GoToControl "ProdQty"
Exit Sub
Else
Me.ProdQty.BackColor = 255
Me.ProdQty.BackColor = 16777215
Me.ProdQty.ForeColor = 0
DoCmd.SetWarnings False
DoCmd.OpenQuery "Update Product Qty in Current Order", acViewNormal, acEdit
Me.Requery
Me.Refresh
Me.Repaint
DoCmd.GoToControl "ProductCombo"
End If
ProdQty_Error:
Exit Sub
End Sub
Here's the Update Query:
UPDATE [Current Order] INNER JOIN Products ON [Current Order].[Product #] = Products.[Product #] SET [Current Order].Quantity = Forms![Order Form]!ProdQty, [Current Order].Price = IIf([Forms]![Order Form]![PriceCodeCombo]="CS",[Products]![Contract Net]*([Forms]![Order Form]![ProdQty]/[Forms]![Order Form]![ProdLDU1]),IIf([Forms]![Order Form]![PriceCodeCombo]="EDW",[Products]![Ed Wholesale]*([Forms]![Order Form]![ProdQty]/[Forms]![Order Form]![ProdLDU1]),IIf([Forms]![Order Form]![PriceCodeCombo]="R2",[Products]![R2 Net]*([Forms]![Order Form]![ProdQty]/[Forms]![Order Form]![ProdLDU1]),IIf([Forms]![Order Form]![PriceCodeCombo]="R3",[Products]![R3 Net]*([Forms]![Order Form]![ProdQty]/[Forms]![Order Form]![ProdLDU1]),IIf([Forms]![Order Form]![PriceCodeCombo]="R4",[Products]![R4 Net]*([Forms]![Order Form]![ProdQty]/[Forms]![Order Form]![ProdLDU1]),IIf([Forms]![Order Form]![PriceCodeCombo]="R5",[Products]![R5 Net]*([Forms]![Order Form]![ProdQty]/[Forms]![Order Form]![ProdLDU1]),IIf([Forms]![Order Form]![PriceCodeCombo]="R6",[Products]![R6 Net]*([Forms]![Order Form]![ProdQty]/[Forms]![Order Form]![ProdLDU1]),IIf([Forms]![Order Form]![PriceCodeCombo]="W",[Products]![Wholesale Net]))))))))
WHERE ((([Current Order].[Product #])=[Forms]![Order Form]![Product1]));
I tried copying that code to "After Update", "On Change", and "On Lost Focus" events but the results were the same.
Any suggestions would be greatly appreciated. Thanks!
View 5 Replies
View Related
Jul 10, 2014
I built a form—frmDataEntry—whose Record Source is a query called qryEvent, which contains various fields from tblEvent. The primary key field is called EventID.
I also build a subform—sfmDataEntry—whose Record Source is a query called qryEventImages, which contains various fields from tblItem. One of those fields is ItemEventLink, which links records from tblItem to the EventID field in tblEvent. There is also an image box in this subform: filling in the field ImageFile with an image name (example: Logo.jpg) causes that image to display in the image box.
I’ve inserted the subform into the form using the Subform Wizard. Now I’m getting an error message that says "2450: Microsoft Access cannot find the reference form ‘sfmDataEntry’." Why this is popping up. The Link Master Fields and Link Child Fields sections of the property sheet are filled in correctly. Moreover, the subform records are still appearing, but the images linked to each record aren’t loading.
View 8 Replies
View Related
May 19, 2015
I have to write a code in a form so that if nobody is doing any activity for 5 minutes then after 5 minutes automatically press Close button named BtnClose in that form.
View 5 Replies
View Related
Apr 24, 2013
Trying to get a total on main form from records from two subforms.
I'm coming up with Run-Time error 2450 Microsoft Access cannot find the referenced form 'tblitemlist subform'.
View 3 Replies
View Related
Sep 24, 2013
I try to run a function off of a button click.
The code is
Private Sub Command_Click()
Run fuctionname()
End Sub
The code is ran, but then I get a msg box : Run-time error '2517':
Microsoft Office Access can't find the procedure '.'
View 5 Replies
View Related
Jul 18, 2013
how to disable the main close button so the user is forced to click the Quit Application button on my main switchboard?
View 8 Replies
View Related
Dec 9, 2014
I am required to write a code that will allow me to generate a table at the click of a button. Is there such a thing?
The table name should be Table1, and it contains 7 columns.
First column: Auto number (PK)
Field1: Memo
Field2: Memo
Field3: Memo
Field4: Memo
Field5: Memo
Field6: Memo
View 2 Replies
View Related
Sep 17, 2014
the login is working perfectly, once It logs in there is a button to expand all that is based in JS. I can't seem to work out how to get it to click the button to expand the whole menu, latest code is below:
Code:
Option Explicit
Function Checkpage()
Dim IE As Object
Dim lform As Object
Dim Document As Object
Dim item As Object
[code]...
View 3 Replies
View Related
Jul 25, 2013
I want to run multiple SQL commands on click of a button. I have these three command,
CurrentDb.Execute "INSERT INTO UserMadeDeviceT(Product, ORESector) " & _
" VALUES ('" & Me.D_NewDeviceTxt & "', '" & Me.D_ORECmb & "')"
CurrentDb.Execute "INSERT INTO UserMadeDeviceT (RatedKilowattPower, KilogramWeight)" & _
" SELECT RatedKilowattPower, Weight FROM UserSelectedComponentT " & _
" WHERE [TotalComponent] = '" & D_ComponentNameCmb & "'"
CurrentDb.Execute "INSERT INTO UserMadeDeviceT (Cost) SELECT SUM (EuroCost) FROM UserSelectedComponentT"
all of these work indevidually and return the correct value but the add three rows to the table. How can I combine these three commands into one so that it will only add one entry?
View 8 Replies
View Related
Feb 3, 2014
I have created a button that works fine however it will only work one click per form load and i cant seem to figure out why.
Code:
Private Sub BntExpired_Click()
Dim QryAllCourses As recordset
Do Until ExpiryDate > Date Or ExpiryDate = ""
MsgBox ([FirstName].Value + " " + [SecondName].Value + "'s course in " + [CourseName].Value + " has expired")
recordset.MoveNext
Loop
Exit_BntExpired_Click:
Exit Sub
Err_BntExpired_Click:
MsgBox Err.Description
Resume Exit_BntExpired_Click
End Sub
View 8 Replies
View Related
Oct 14, 2014
Everytime i want to make some changes to my "Testing" Database , always got somebody using it / opening it...
I am trying to create a button , the function of the button is close "Testing" access database who using it or opening it , Example : 5 users included me in a company , when I click a button , 4 of them will received a notification with close "Testing" database message , can do that ?
View 1 Replies
View Related
Dec 9, 2013
I have a textbox with about 400 characters, I also have 5 textboxes next to it. I want to click a button and I want to transfer the characters to the other textboxes 208 characters at a time.
View 3 Replies
View Related
Oct 18, 2013
I would like to make an append query to piece together multiple tables into a holding table, once the command button is clicked.
a) how to make an append query in vba,
b) How to call an append query on click of a command button?
View 1 Replies
View Related
Dec 22, 2014
Is it possible in access, to create a button that will copy a file to a new directory? Specifically, the data field in question is an access hyperlink that we can click on to open a PDF drawing of a part. I just want to copy the file the hyperlink points to, into a new directory.
EX:
X:database/drawings/somefile.pdf
X:erp/drawings/somefile.pdf
I don't think a macro can do this, but perhaps vbscript can.
View 2 Replies
View Related
Jun 20, 2013
From formA I click on button cmdFormB and I open FormB. From formB I click on button cmdFormC to open formC.
Is there a way to open forms formB and formC by clicking on a button on formA?
View 5 Replies
View Related
Dec 8, 2014
I have a table EmployeeInfo containing three fields
EmployeeId
Name
FatherName
I have created form for this table.
I do not want to use autonumber for employeeid for some reasons. I want to place a button along employeeid test box on form.
User will click on the button it will get max employee id from employeeinfo table and add 1 and copy it into employee id text box.
What will be the code for button click event.
View 2 Replies
View Related
Jul 1, 2015
Code:
ExportWindow = FindWindow(vbNullString, "Output To")
OkButtonTest = FindWindowEx(ExportWindow, ByVal 0&, "DUIViewWndClassName", vbNullString)
ButtonOKTest = FindWindowEx(ExportWindow, ByVal 0&, "Button", "OK")
mouse_event MOUSEEVENTF_LEFTDOWN, 0, 0, 0, 0
mouse_event MOUSEEVENTF_LEFTUP, 0, 0, 0, 0
The above code works and my issue is how can I move the mouse to the OK button and click on it to. The reason why is when I SETTEXT to the address bar it does not refresh so I SETTEXT to the file name box to navigate to the prescribe address which will refresh the navigation bar once the OK button is clicked. How to refreshing the navigation bar.
View 2 Replies
View Related