Modules & VBA :: Goto Record Without Filtering Results
Dec 5, 2013
Is there a way to search for a term within a form and goto a record that matches that term assuming there was only one matching result (Unique ID, for example).
But NOT filter the results so that user can still navigate as usual after the search has been carried out.
View Replies
ADVERTISEMENT
Apr 21, 2014
I am using a form in which i am filtering the results in the list box based on the textbox value. I am dynamically switching 3 row sources for the list box.
My Need is that the results produced in the listbox should get filtered again when typing in the second text box i.e based o the country name.
View 1 Replies
View Related
Mar 22, 2006
Hi,
Hope this is a nice and simple one. I know I have seen various "last record" references in various threads but I couldn't find one in a search.
I have a command button on my form which navigates you to the next record. I use this rather than the navigation buttons as I can set the tab order to go to it after all the fields are filled. This works fine unless the form is on the last record, in which case it throws up an error. To get round this, I want to test that the current record is not the last record.
It is the test in the If statement I need help with. How do I check that the current record is not the last record in my form? I think it will use the dcount but I don't know how.
Private Sub cmd_Next_Record_Click()
On Error GoTo Err_cmd_Next_Record_Click
If (current record < dcount) then
DoCmd.GoToRecord , , acNext
Else
DoCmd.GoToRecord , , acFirst
End If
Exit_cmd_Next_Record_Click:
Exit Sub
Err_cmd_Next_Record_Click:
MsgBox Err.Description
Resume Exit_cmd_Next_Record_Click
End Sub
Thanks in advance.
Keith.
View 7 Replies
View Related
Jul 19, 2005
:confused: Have not worked with access for a long time am trying to update an oldie.
Main form has a sub form. With each new service to customer I select next on the sub forms navigation button. 1 customer might have 6 records on his sub form and another might only have 2.
Problem is that when viewing reports of these visits I need to work on the last service record whereas my sub form always opens to the first record and this is the date read in the reports.
I know it isn’t difficult but I have spent hours on it without success
How can I get the databases to open with all sub forms at last entered record?
Can anyone help ?
View 2 Replies
View Related
Feb 26, 2015
I have a form and subform where i have table data in the subform and 03 Combo box in the main form header. I need to do some filtering using combox box1 and out of that filtered records i need to do one more filtering using combobox2. then again another filtering by Combobox3. ( same way we are doing in Excel)
Subform is running on a query where i have following fields;
Vessel
Voyage,
POL
POD
MLO
by Combo box 1 i need to filter Voyage
by Combo box 2 i need to filter POL ( out of the data filtered by above )
by combo box 3 i need to filter POD ( out of the data filtered by both above )
View 3 Replies
View Related
Jan 30, 2006
I am trying to go to a specific record in a recordset (on a form).
In the past I as using the typical open the form and use the filter to go to the specific record:
strLinkCriteria = "Where ID = 5"
Docmd.openform "frmName", , strLinkCriteria
This takes me to the correct record, but filters the form down to that one specific record. The users instead would like to go to the specific record, but be able to see all the other records for the form correctly.
Is there anyway to do this?
Thank you,
T.J.
View 2 Replies
View Related
Apr 19, 2006
I'm requerying a form after an update.
I would like to have the form to be set to its current record when being requeried. How can I easily achieve this?
I've seen things about recordsets, I'm working with ADP (based on SQL Server) and don't know or all DAO events will help me.
View 3 Replies
View Related
Jun 5, 2006
OK, I have a couple problems.
One:
I've done this before but I lost the code (and I've been away from DB for a while so I'm very rusty)
I have a form with many records, and in the header of the form, I have a combo box based on the PrimaryKey of the form. I want to select the record from the Combo box and have the form jump to that record.
Two, while actively entering new records into the form, I need the combo box to update to include all entries.
(FYI I am working in Access 2000)
Thanks!
View 1 Replies
View Related
Aug 2, 2012
I have a tab control with 11 pages (departments). Each page have 3 subforms (country, channel, product). Each page can have multiple countries, channels and products.
Example:
Marketing: Country A, Country B and Country C
Country A: Channel A and Channel B
Channel A: Product A, Product B and Product C
So a combination can be:
Marketing in Country A in Channel A with Product A.
I enter several informations (sales, dates, comments etc) on each subform. The subforms are linked (master/child). I store the different primary keys in hidden textboxes.
When I navigate between the pages, the selection resets due to a necessary requery. How can I keep the selection?
View 2 Replies
View Related
Jan 15, 2014
I have created Command buttons on forms with VBA code. Records GoTo previous and GoTo Next Record so both of working is good. But Next Record command is force to a new record. If suppose when we clicking on last record. It is go to new record without any message. So No need to force a new record with Next Record Command. Only just move to next record if there is no records show a message. Below mentioned both VBA codes so there is any changes on GoTo Next Record Code?
VBA Code:
Go To Previous Record : DoCmd.GoToRecord , , acPrevious
Go To Next Record : DoCmd.GoToRecord , , acNext
View 4 Replies
View Related
Jun 20, 2013
I'm looking for a simple routine, preferably in the On Key Down or or On Key Press event of a form to quickly navigate to a record based on the key pressed.
I have a form with names in a table layout (continuous form).If the user is on the name field, I'd like it to navigate to the first record that contains first letter of the key pressed. So if a user presses "K", the form will go to the first record that starts with a K.Yes, the names in the form are alphabetical, but in a list with over 100 names, this could speed things up just a bit and save a lot of scrolling and looking.I was thinking of using KeyCode and I already have an event to navigate by the arrow keys so I'm considering building on that.
Code:
If KeyCode = 40 Then ' Down arrow
DoCmd.GoToRecord acForm, Me.Name, acNext
ElseIf KeyCode = 38 Then ' Up arrow
DoCmd.GoToRecord acForm, Me.Name, acPrevious
End If
I am thinking to use a Select Case and add the key codes for all the letters.
View 11 Replies
View Related
Sep 29, 2005
Hi All,
I have a continious form where each record can be edited. After editing a record the form does a me.save and a me.requery (is important). After this it jumps back to the first record (seems logical), but how can I write a code that he goes back to the 'previous edited record'.
Thanks.
View 4 Replies
View Related
Jul 12, 2014
I have a form and subform. The subform is connected to the form and display all BandID's associated with that record. What i want is the ability to click on a record in the subform so that it automatically set's that record in the form for editing.
View 14 Replies
View Related
Oct 5, 2014
I want substract from 9/20/2014 totreg40 - reg = ovt but when reg=0 the remainder subtract from 9/19/2014 (previous record) totreg40 - reg = ovt, etc. The sum of reg = 40.
IDFECHA REGOVTTOTREG40
2309/15/2014 5.5 0 46.75
2319/16/2014 8 0 46.75
2329/17/2014 8 0 46.75
2349/18/2014 7.75 0 46.75
2979/19/2014 8 0 46.75
2359/19/2014 8 0 46.75
2339/20/2014 1.5 0 46.75
I want the result like this:
IDFECHA REG OVT TOTREG40
2309/15/2014 5.5 0 46.75
2319/16/2014 8 0 46.75
2329/17/2014 8 0 46.75
2349/18/2014 7.75 0 46.75
2979/19/2014 8 0 46.75
2359/19/2014 2.75 5.25 46.75
2339/20/2014 0 1.5 46.75
View 1 Replies
View Related
Jun 17, 2015
After appending data in a table, I open a particular form. I want to display only the last record. I've added the code (DoCmd.GoToRecord , , acLast) to the On Load and On Open properties without success (opens first record).
View 14 Replies
View Related
Jul 3, 2013
Is there a way to pass a variable to the GOTO statement?
View 14 Replies
View Related
Jan 14, 2014
I have a combo box called Combo9 in form NavigationF, the combo box displays the results of FollowUpQ Query. What I would like to do is when the user selects a row from the combobox is closes NavigationF and opens ContactHistoryF and goes to the record selected in the combo box. I have made sure that the combobox contains CustomerID which is the primary key for my table.
View 4 Replies
View Related
Mar 6, 2007
I've created a database to keep track of all our Microsoft licences for the company.
Just to make sure we're fully licenced, to allocate where needed, and to help reallocate when we replace a pc.
I have 2 tables, 1 hardware (listing PC ID,location etc.) and 1 software (listing software type, software licences, and to which PC ID allocated).
What i'm trying to do is filter the pc's missing either an Office licence or a Windows licence or both, so i can base a report on the results.
I've tried but can't quite get it to work.
Any help would be greatly appreciated.
View 3 Replies
View Related
Apr 10, 2015
Someone fills in a new patient into the database, and the 'chipsoftnummer' which is the number in another database. That number is unique, so i want to have it where if someone fills in a number that already exists in the database the afterupdate event will open that record in the form.Here's the code i put in the input textbox update field:
private Sub chipsoftnummer_AfterUpdate()
Dim NewCHIP As Integer
Dim stLinkCriteria As Integer
Dim custNo As Integer
[code]...
It doesn't work, simple things like hello world do work so VBA is enabled.
I've attached the corresponding part of the database (took out all non-relevant fields and tabs) .
View 7 Replies
View Related
May 26, 2006
Whats the best way to filter search results?
I'll do my best to explain my problem:
I made a form that lets users search for records in a database and displays them in another form. In that form I've made 3 buttons to let users narrow down the results to show only certain items within the search results.
Now, 2 of the buttons show specific items and the third one toggles the form to display all the records. So lets say I'm filtering records by whether or not they contain the words "car" and "truck." If a record has "car" but not truck and I click the button to sort by "truck" then the search result goes blank, which is ok. But if I click "car" or "show all" to display everything again then the search result stays blank.
This doesn't happen with records that contain both "car" and "truck."
For every button I have something like this: DoCmd.OpenForm "AdminSearchResults", , "SOW", "VendName = '" & VendName & "'", , , "'VendName'"
I know my explanation may suck, but if anyone can help me, that would be great, lol
View 3 Replies
View Related
Oct 16, 2014
I am trying to create a query that filters results only outside of 1 standard deviation of the mean. Is there an option for this in the criteria spot? I'm fairly new to Access and I'm not sure if I can reference a particular cell in the criteria.
View 1 Replies
View Related
Dec 19, 2014
I have a crosstab query. There is a field for row headings that specifies QUARTER (Q1,Q2, Q3,Q4) and another field for row headings that specifies YEAR(2015,2016,...etc)
I want to be able to have the user input the criteria in to a box and filter the crosstab query to then display the filtered results.
Right now on my column headings I have MONTH.
When I try to reference the form in the criteria, I always get the error
"The Microsoft Database Engine does not recognize ..... as a valid field name or expression"
Does this mean that you can not filter crosstab queries?
View 5 Replies
View Related
May 30, 2013
I have these 3 combo boxes filtering results into a subform.
Code:
Private Sub Combo5_AfterUpdate()
If Len(Nz(Combo5, "")) > 0 Then
FindRFQsubform.Form.Filter = "[RFQ Title] = '" & Combo5 & "'"
FindRFQsubform.Form.FilterOn = True
[code]...
View 1 Replies
View Related
May 21, 2013
I'm taking my first database class and I'm working on a hospital project in which I need to determine which pair (one doctor and one nurse) has a decremental performance as weeks go on.
I have an "r" and "s" queries.
These are the fields:
r: [DOCID,NURSEID, WEEK, RESULT]
s: [WEEK, RESULT]
I would like to find what pair had a "Good" result in week 1, "Average" in week 2, and "Bad" in week 3. My problem is that the results need to be in this specific order.
The professor told us to use a formula and I got the solution after building 6 queries that involved union, difference, and cartesian.
View 4 Replies
View Related
Dec 9, 2005
Hi,
I have two combo boxes where the first lists values in one table. On selecting one I want a second combo populated with records in another table where foreign key = primary key.
Obviously the query is
select location from client,location
where client.client = location.client
However I can not get to the current record.
Alternatively, I could populate a list programmatically on the afterupdate event but I am not sure how to do this or if this is the best way. Any advice would be most appreciated.
Thanks John.
View 1 Replies
View Related
May 29, 2012
The filter output from a recordset in the following code is 1. But this is incorrect: How can this be corrected?
Private Sub Command43_Click()
Dim curDatabase As Database
Set curDatabase = CurrentDb
Dim rs3 As Recordset
Dim t As Recordset
Set rs3 = curDatabase.OpenRecordset("Select * from [Courses under Programs]")
rs3.Filter = "ProgramCode = 'ANS.CT'"
Set t = rs3.OpenRecordset
t.MoveLast
t.MoveFirst
MsgBox t.OpenRecordset.RecordCount
End Sub
View 2 Replies
View Related