Modules & VBA :: How To Remove ADO RecordSet From ListBox
Aug 6, 2013
How does one go about removing a recordset from a ListBox?
I have a list box that I want to toggle between using a query and an ADO RecordSet to populate the values.
Once I set the listbox .RecordSet property to the ADO.Recordset, I can't remove the values displayed in the listbox when I assign a query to the .RowSource property.
I suppose I can turn the .RowSource query to an ADO Query but I am being lazy and don't want to rewrite the query as a T-SQL query.
I previously thought the list box was pulling data from the .RowSource query but I realize I was wrong.
I'm trying to setup a listbox so that multiple items may be selected and removed at once. The Listbox Multi Select property is currently set to "Extended" and I have the following code on the onclick event of a command button:
Code:
Private Sub Command12_Click() Dim i As Integer For i = List10.ListCount - 1 To 0 Step -1
[Code]....
I have tested selecting 4 or so records on the list box and then pushing the remove button but it seems that the only record that is removed is the selected record that is furthest down on the listbox. The other selected records become unselected and must be reselected in order to continue removing records.
I'm trying to populate a listbox from a recordset. I will explain what I'm trying to achieve.
I have a (continuous) form with some data from a table. On the form header I have a listbox, showing all (distinct) customers from that form.
The user is able to do some filtering. That all works great. But I want to populate the listbox with ONLY the customers on the form AFTER filtering.
One way I thought might me the solution was using RecordClone. But I'm stuck there. It must be something simple for an expert. I'm not entirely a newbie, at least not to VBA. Is there an easy way to refer the listbox' recordset to the actual recordset on the form?
Special situation: The SQL Server Linked Server across the country is linked to a Read Only Oracle DB. This data pull works perfectly and populates the Subform.
The problem is that Oracle can take 3 to 6 seconds to retrieve the single record depending on the network traffic through a small pipe.
The code below shows the RecordSource for the SubForm. clicking on a list box supplies the value. Then 3 to 6 seconds later, the subform populates.
The actual Recordset for this Recordsource is needed to conduct Validation on each field. Normally this would be on SQL Server, I might just create a Recordset Oject and run this SQL statement again in 1 milisecond. In this case, it will probably take an additional 3 to 6 seconds. Avoiding another lengthy round-trip to Oracle would be prefered.
Goal: How does one grab, clone, or other wise reference the existing recordset for the SubForm?
Note: Immediate Window - One single field can be returned quickly
There are 48 fields that need validation - is there a way to reference the entire recordset?
Immediate Window during Break Mode: ? me.fsubsrNavSHLBHL("NavSH_QQ") NESE ' this is the correct value for the current recordsource
Set a breakpoint right after the line: fsubsrNavSHLBHL.Form.RecordSource = "Select * from vsrNavigatorSHLBHL where Well_ID =" & txtNavWellID.Value
Immediate Window: ? me.fsubsrNavSHLBHL.Form.RecordSource Select * from vsrNavigatorSHLBHL where Well_ID =91229
I have a DAO recordset(rcdSearch) which contains a number of fields(eg UNIQUE_NUMBER, AREA and SITE_NAME). Assuming the recordset is populated(in this case I know it is), how can I populate a listbox with the data? I have tried the following with no joy
me.listBox.RowSource = "rcdSearch" 'puts string "rcdSearch" in column header me.listBox.RowSource = rcdSearch ' returns type mismatch me.listBox.RowSource = rcdSearch!UNIQUE_NUMBER ''puts unique number in column header row me.listBox.Column(0) = rcdSearch!UNIQUE_NUMBER ' object required error msg
I have even tried using the SQL string that generates the Recordset, this does not return any results. :confused:
I would be grateful for any help on this issue, as it has been doing my head in for days!
I'm using Access 2010 and have a form that is basically the last step in generating a report (which will be a printable invoice).
I am facing major problems when it comes to removing line items that the user may have accidentally clicked. I have a checkbox field embedded in the table (tblLineItems) which is set up as binary. I have created a form from tblLineItems, and have in turn embedded that as a subform on the invoice generating form.
When I select line items, I have them populating a two column listbox that shows the user what they have selected before actually opening the report. The code I am using is on the checkbox click event in the subform:
Code: Private Sub InvoiceY_N Click() Dim InvLineTotal As Currency If InvoiceY_N.Value = True Then
I'm working on and Access 2003 front end with a SQL Server Back End. I would like to take advantage of the speed of Stored Procs to populate a list box on a form. Here's the code I'm trying to use.
Set cmd = MakeStoredProc("StoredProcName") Set prm1 = cmd.CreateParameter("ParamName", adInteger, adParamInput, , Me![ID]) cmd.Parameters.Append prm1 rstSource.CursorLocation = adUseClient rstSource.CursorType = adOpenKeyset rstSource.LockType = adLockOptimistic Set rstSource = cmd.Execute
Me![ListBox].Recordset = rstSource
Access doesn't like this. What is wrong. I get the message "Object doesn't support the property or method"
I want to write a email where there are 2 or 3 different ordernumbers for same email, i want to include the email in the mail part as single column table. how to do it? also can i use result of one recordset for other recordset?
I have changed numerous features in "Current Database" under "Options", but I am unable to achieve what I need. I just need a popped form to show up when the program is initiated (no other background), meaning, I want to hide all the Runtime menu. I am able to get to the point of just the form showing up, but the form is maximized, which is not what I desire.
I have a multiple record form that displays fine. However, on the left hand side there is a column that when a record is selected, an arrow appears there. I don't know what this is called in order to suppress it.
I have a Memo field that is used to be a description of a document. I don't know what the user will put in (could be anything), but it is eventually passed in a string to a query, etc.I discovered during testing that if an apostrophe is entered (Ex: This document explains how to deal with Joe's pleasant disposition.), it breaks my code. I then realized that all reserved words and characters would cause this problem.
I can get around this one just by using Replace(str, "'", "''"). However, I know there are others that will cause problems, and I don't want to end up with a string of replace statements just to fix them.
I posted this within the Reports as well, but since this has a little bit of VBA decided to ask this here as well.
I have a report that is created from the following query (qryTotalProjectHours). What I am trying to do is get the total hours spent on Tasks within a given time period. A given Task can we worked on by multiple individuals and hence I need to find a way to aggregate the hours spent.
Code: SELECT TasksEntries.Project, TasksEntries.Task, Sum(TimeTracker.WorkHours) AS TotalHours FROM TasksEntries INNER JOIN TimeTracker ON (TasksEntries.EmployeeId = TimeTracker.EmployeeId) AND (TasksEntries.TaskID = TimeTracker.TaskId) GROUP BY TasksEntries.Project, TasksEntries.Task
I accept the start and end dates in a form and pass it like shown below. WorkDate is a column in the TimeTracker table and is not present in any other table.
When the report is invoked, I get a box where it says "Enter parameter value" for Workdate..
Is there anyway I can get rid of the prompt? I never thought you needed the column name in the SELECT statement to be able to run this.
I should add the I tried the query with the WorkDate hardcoded in there and it worked fine and returned the correct results
I have attached the cut down version of the database that I am working on.Open up the frmManagerReport Form Leave the Employee drop down empty Enter the start and end dates ( I have used 4/1/2015 and 4/30/2015) Select the 3rd option "Generate Tasks by Total Hours" click on Run When you do that you will see the prompt come up. Enter any date and you will see the report. The report generated uses the results from the query and does not filter on the date selected in the form. This is what I have been struggling to fix since yesterday but have reached nowhere..
I have a table which has duplicate records so I want to write down the code so that when the user click on a button then it should remove the duplicate records from the table.
I'm trying to improve the dialer that i place on microsoft access forms. basically there's a command button that dials the number that is in a text box, but we have a new job that's just come in that requires numbers to be copied and pasted into the text box. these numbers have a space between the dialing code and the telephone number and i need to make the dialer check for a space and remove it before dialing.
Here's the code for the dialing buttons:-
Private Sub cmd_Dial_Click() On Error GoTo Err_cmd_dial_Click CT.MakeCall "8" & txt_telephone.Value & "#", "", False, "", "", False
I would like to put a message on the screen for informing the user - mostly during some procedures that might take time or when, after a warning, I want to go on with the program but without action from the user.
Msgbox is obviously not the one I'm looking for as it needs customer acknowledge. Is there a solution for this task?
How do I remove items from a right click menu in access 2003? For example I need to remove the form view / design view button from a right click menu but i want to keep the hide/show columns button on the same menu.
I have a form with a query set up as the record source. If there are records in this query, the form will display. When the user clicks a button, if there is another record in this query, the form displays the next record. When it gets to the EOF, it should close this form, but EOF is not being recognized (I run debug and it says it's false when the button is clicked)? I get run-time error '3201' after I click the button twice.
I know for a fact that there are 2 records in this query. So once I click the button on the 2nd record, the form should close.
Code: Private Sub SelectTblMyMedButton_Click() Dim db As DAO.Database Dim rs As DAO.Recordset Set db = CurrentDb() Set rs = db.OpenRecordset("qryMedDataSelect", dbOpenDynaset)
I have learned the basic looping technique for going through a record set from the following link. I need to know if my logic is on the right track. URL...
My question is a followup to a thread that was opened on this forum: URL....I want to do the following:
1) Use record set looping technique to fix a variety of incorrect naming conventions to a standard format 2) Update the table (or create a new table) from the updated record set values. (Is my logic going to update the table selected in the code I used to dimension the record set or will I need to do something else to make the changes available for other tasks after record set is closed ? After the naming conventions are fixed this data will be available for excel automation that I am working on and posting questions on another thread in this forum. HAHA I'm going code BANANAS) 3) rs.fields![fleetlocation] is used so many times, how can I make this a variable (what do I dimension the variable as?) 4) Use an AND statment with an if statment (how to do this with correct syntax)
Code: sub loopandfix() on error goto errorhandler: strSQL = "tblUnionQueryResults" 'table was created from a union query but has inconsistant naming conventions for the fleet location name
Ref# Rev 97 b 98 c 99 c 99 e 100 c 100 b 101 a 102 b
I need to create a simple report but remove the duplicates (ex. Ref# 99,100). I need to delete the older Rev's (Ex Ref# 99 Rev C, Ref# 100 Rev B).Is this done throughRecordsets? will an SQL query do the trick?
So I have been developing a database tool that needs to have multiple ways of filtering data. I wanted to be able to display the data nicely so I'm using a split form.
As usual, there is an easy to read form on the top half and a datasheet on the bottom half. On one side of the form half I have some comboboxes that are associated with fields in the datasheet. The comboboxes apply multiple filters, narrowing the search results down. It all works fine.
However, I've been trying to figure out a way to remove just one filter at a time. There is a button to the right of each combobox that is intended to clear just one filter.
So far this is what I have. This code clears all filters.
Code: Function removeFilter(source As String, combo As ComboBox)
'source is the field being filtered and combo is the current 'value of the combobox
With Forms("PART_QUERY") .Filter = "[" & source & "] = " & Chr(34) & combo & Chr(34) .FilterOn = False End With
End Function
I had some success using another method with select statements. Every time I cleared a filter, I would also check every other combobox to see if they were not null, then reapply each one of there filters. That seems way over complicated. I'm sure I'm missing something.
How do I remove one, specific filter from a split form, after I have applied many different filters?
I have created a form that allows the user to create an Outlook email message using a saved HTML template in VBA but the users default Outlook signature is added every time the message is sent.
how to remove the default signature from the message body?