Modules & VBA :: How To Check If A Table Contains Blank Fields / Values
Feb 28, 2014How can I check if a table contains blank fields/values.
If there are blank fields I want to replace them with 0.
How can I check if a table contains blank fields/values.
If there are blank fields I want to replace them with 0.
I got one months table containing a reporting_month ,timeperiod and an Index column ID with data type Autonumber.Basically I want to search through the table whenever the User types in a new reporting month or timeperiod over the dialogue.Now I want to realize the following options:
1. The user types in a new reporting month, when a record in the months table exists with a timeperiod and a blank reporting month field, it should be assigned there. For example the User types in reporting month = 032014 it should be assigned to the Time_Period Value = 042014-032015
2. Vice versa, the user types in a time period. This value shuold be assigned to the blank field beneath the existing reporting month.
I'm trying to write some Code with the target to take a value from a textbox (out of a form) and a pregiven value (in this case = 2) and enter them in a new record in a table. But only if there is not already a record with the exact same combination of these to values. When done, the same button should proceed you to the next form (but this code is not already implemented in the fragment below) even if no values are added because they already exist in this combination.
Code:
Public Function GetID_PatientStudiesGroup&()
GetID_PatientStudiesGroup = [Forms]![frm_PatientStudiesGroupTZP]![ID_PatientStudiesGroup]
End Function
Private Sub BPRS_T1_Button_Click()
Call GetID_PatientStudiesGroup&
Dim strSQL As String
[Code] ....
As you can see, I tried to use a function to refer to the value out of the form, because I didn't find out how to refer to a form in an SQL Code.
Just to give you a better overview: The table where the information should be added is named "tbl_PatientStudiesGroupTZP". The form where you find the Textbox "ID_PatientStudiesGroup" (with the value I need to transport) is named "frm_PatientStudiesGroupTZP". Every part (except the WHERE NOT EXISTS part) worked perfectly for itself, but not when thrown together.
I have run into an issue with a basic DLookup. The database has grown in size and now we could have multiple entries, but I want it to return a certain one. So the information could be in it three times. Of course DLookup stops after the first one. How do I get it to loop to check the entire table? Someone mentioned to me to use a recordset, but how to write that as I have never used it before. Below is what I was using until this new request came up.
<code>
Private Sub txtloan1_AfterUpdate()
If IsNull(DLookup("[loan1]", _
"settlement", _
"[loan1]=""" & Me.txtloan1.Text & """ AND [status] = 'Open'")) = False Then
Cancel = True
MsgBox "Test", vbOKOnly, "Warning"
End If
End Sub
</code>
This was also executing after the user entered the information within a text field. I did not want them to enter all the data and then have it come back as a duplicate.
In sheet 1, In column A all the Batch numbers are present. So I want to check if each of these is present in Access table named "tblmain". If its present then display its corresponding Policy number in Column B of attached workbook.
View 1 Replies View RelatedThe DolphinBatchNo has number data type but the following sql statement doesn't capture the ight records. it doesn't check id dolphinBatchNo is blank.
Code:
strsql="select * from `MasterTBL` where PolicyNumber>=" & TxtFPolNo & " and PolicyNumber<=" & TxtLPolNo & " and PolicyStatus='Live' and DolphinBatchNo is null order by PolicyNumber"
I have a query which returns, among other things, a number of boolean fields. In some cases, there will be a genuine True or False value in each of these fields; in others, it can and should be Null (e.g. as a result of a 'failed' LEFT JOIN of some description, where there is no associated record in the joined table which fulfills the criteria)
So something like this :
Code:
SELECT [tblTable2].[fldBooleanField]....
FROM [tblTable1]
LEFT JOIN [tblTable2]
ON [tblTable1].[SomeID] = [tblTable2].[SomeID]
However, I will be writing the result of the query to a text file and here's the problem. I want to show a numeric value for a genuine True / False (i.e. -1 and 0 respectively using the standard boolean conversions in Access) and a blank for any Null values.
So I tried this :
Code:
SELECT CInt([tblTable2].[fldBooleanField]) AS fldBooleanField....
FROM [tblTable1]
LEFT JOIN [tblTable2]
ON [tblTable1].[SomeID] = [tblTable2].[SomeID]
However, currently when I look at the exported recordset in Notepad, I am getting 0's for both False and Null values (and -1 for True)
How I can adapt my query to keep Nulls...null? And convert the genuinely present boolean values to integer form?
Only thing I can think of is to use (untested) :
Code:
IIf([tblTable2].[fldBooleanField] Is Null, Null, CInt([tblTable2].[fldBooleanField]))
But there's a number of boolean fields in there, all requiring the same treatment.
I have two tables (Table 1, Table 2). Table 1 is blank and has the fields "Field1, Field2, and Field3." Table 2 has data and 10 different fields ("Field1, Field2", etc). I want to copy all data from the matching fields in Table 2 to the corresponding Table 1. I've tried an Update Query in design view. Did not join any records, and just a simple:
Field: Field 1
Table: Table 1
Update To: [Table2]![Field5]
This returns 0 records to update. I thought about a Make Table to override the entire Table, but that isn't working either.
I am a bit of a novice when it comes to Access, but have managed to create a form with a subform embedded and various filters to show different data within the subform, including a date range filter. The code I have used for these filters is as follows:
Private Sub Command40_Click()
Dim strCriteria As String
strCriteria = createCriteria("[Introductions].Town", "List78")
strCriteria = strCriteria & " and " & createCriteria("[Introductions].Ownership", "List52")
strCriteria = strCriteria & " and " & createCriteria("[Introductions].Company", "List54")
[Code] ....
This all works fine, but I'm wondering what I need to add to this code to make it so that if the date boxes are left blank, records from all dates are displayed. At the moment I have to enter dates in order for it to work properly.
I have a bit of code that uses controls on a form to batch add records to the tables. Before the code executes, it needs to do a check to make sure that all of the needed data has been supplied.
Code:
If IsNull(txtDateAdded) Then
MsgBox "Please supply the date that the Label record was created"
Exit Sub
Else
If IsNull(cboRecordCreator) Then
[Code] ....
I have got like subform which I think is the tech term I use it to filter dates on field "date raised" and open's a report depend on date's entered in txtstartdate and txtenddate it works perfectly but I need to add some check boxes to check other field's are true/false ...
Code:
Private Sub cmdPreview_Click()
Dim strReport As String
Dim strDateField As String
Dim strWhere As String
Dim lngView As Long
[Code] ....
I need to add code to the text in red well I'm guessing
here goes with what I would like to add
job cancelled1 check box name field name= job cancelled
job on hold1 check box name field name = job on hold
void property1 check box name field name = void property
E.g. if I put date range in my date boxes and tick job cancelled show all record in that date range cancelled same with job on hold and void property
here some code I did but wont work as it not in the same strwhere above
Code:
if me[job cancelled1] = true then
strwhere = [job cancelled] = 1 'field name
else
strwhere [job cancelled] is null
end if
Some how need to add the strwhere to the code above ...
I am making an asset table which amongst other fields have fields for "serialNo" and "Manufacturer"
I am trying to write some code that after update of manufacturer in the form, will check to see if that serialNo and Manufacturer exist.
ive managed to do it for one value, using
If Not IsNull(DLookup("[serialno]", "Assets", "[serialno] = '" & Me!serialno & "'")) Then
msgbox "blah blah"
which works great, but am struggling when i'm asking it to lookup two values.
I try to go throgh all columns and replace all blank fields with 0.Somehow this doesn't work:
Code:
Sub TEST()
Dim str As String
Dim rs As DAO.Recordset
Dim fld As DAO.Field
[code]...
I am making a database which has its output in PowerPoint. I have set it up so that each field value is shown on a different slide with the code for each slide like this:
Code:
With .Slides.Add(rs.AbsolutePosition + 1, ppLayoutLargeObject)
.FollowMasterBackground = False
.Background.Fill.Solid
.Background.Fill.ForeColor.RGB = RGB(0, 0, 0)
[code]....
This works fine until a filed is blank (which they sometimes are) where it then crashes with error 94 invalid use of null. What I was thinking was putting the whole thing above in an If-then-else statement so that a blank field does not produce a slide, something like:
Code:
If IsNull(CStr(rs.Fields("Song 1 chosen_Verse 2").Value)) Then
Else
With .Slides.Add(rs.AbsolutePosition + 1, ppLayoutLargeObject)
.FollowMasterBackground = False
.Background.Fill.Solid
.Background.Fill.ForeColor.RGB = RGB(0, 0, 0)
[Code] .....
This doesn't work though - at least not like I have written it!
I have the following VBA code that auto populates a word template:
Private Sub Command24_Click()
On Error GoTo ErrorHandler:
ErrorHandler:
[Code].....
The code executes flawlessy but there are three values that are based off check boxes set as YES/NO (EMPLOYEDATREGISTRATION, EMPLOYED and FRINGEBENEFITS). These values show up as -1 for YES and 0 for NO.
Is there anyway to add code to mine that would allow me to change these values before they are sent to the Word template?
I'm creating a search form to filter out data based on certain inputs. My VBA code looks like:
Code:
Private Sub Command18_Click()
On Error GoTo errorcatch
Me.Filter = "([Experiments.Log] Like ""*" & Me.Text21 & "*"") AND ([Expdate] Like ""*" & Me.Text22 & "*"") AND ([BaseSolution] Like ""*" & Me.Text24 & "*"") AND([AddCom] Like ""*" & Me.Text25 & "*"") AND ([Test] Like ""*" & Me.Text26 & "*"") AND ([Plan] Like ""*" & Me.Text23 & "*"")"
Me.FilterOn = True
Exit Sub
errorcatch:
MsgBox "Error #: " & Err.Number & vbCrLf & vbCrLf & Err.Description
End Sub
However, the output does not include records where other fields are blank. I have read that I may need to use Is Null but am not sure how to.
I have a form with various text, date and combo controls. There is a button at the button that runs a macro (Close NB) at the bottom. What I'm trying to do is bring up a msgbox if certain fields are blank and not run the macro. I only want the macro to run if all the fields specified have data in them.
The fields are :
cmb_cliname
cmb_disease
cmb_projectType
cmb_ProposalStatus
The on click code is:
If (Me.cmb_cliname Is Null) Then
MsgBox "Please fill in the relevant details",
ElseIf (Me.cmb_Disease Is Null) Then
MsgBox "Please fill in the relevant details"
[Code] .....
I'm certain this question has probably been asked before, but I can't seem to find it!
I have a form field called fldTitle, and want to ensure users write something that is meaningful by evaluating words within the title to a table of keywords (tblKeywords). I know how to write the IF/ENDIF and the other stuff required, but am struggling to find the right commands to do the comparision. Could someone help me out?
Many thanks.
Basically, what's the best practice or how do we store a query's value into an array then checking what the max or min value is and how to check if let's say "4" is in the array?
View 1 Replies View RelatedI have 3 fields on a form PU_POINTS, SU_POINTS & 2_MILE_RUN_POINTS. The user enters a number 1-100 in each of these fields. If the user enters a number in any of the 3 fields of anything less than 60 then I want it to check a fail box. If the user enters all numbers 60 or more then i want it to check a pass box.
View 2 Replies View RelatedAllen Browne has an page explaining how to set up a database relationship of many to many using a connection table at the following link
[URL] .....
I can set up what he has done easily, but I want to be able to show the information much like the matrix he shows at the top of the page and also include in the query or form "sports" that no one has checked.
I have created a forum that all fields are unbound. On completing it is written to the table using a RunSQL command. This writes to the table with no problem but when it does so it is creating another entry with zero content. This is the save steps with open new form
Code:
Private Sub SaveRecordAddNew_Click()
Call PreSaveCheck
If Me.saveCheck = False Then
Exit Sub
Else
Call WriteToTable
[Code] .....
I have a form with a drop down that links to a table where a user can select or type a record, If they type a record that isn't in the table, the form goes completely blank.
Is there a afterupdate event I can do so that if the record doesn't exist, then a msg prompts and the form isn't completely blank?
I am trying to achieve the following - I want to query a table to see if a record exists with a particular field blank. If so, I would like to prompt the user for data.
In real world terms, when assigning an item to a user I would like to first make sure that the item is not already assigned to somebody else. I have 4 fields, UserName, Item, IssueFrom, IssueTo. So when an item is assigned to a user, the first 3 fields are populated and the IssueTo remains blank, until that item is assigned to somebody else.
At the minute I have nothing in place to prevent a user from assigning the same item to multiple users and having multiple records for the same item in the table.
I have a lookup which selects a 'Recipient'.
I need to add a check to see if this 'Recipient' (user selected) already exists within another table.
If so, I need a pop-up to appear.
If not, I want the user to continue unimpeded.
I have a lot of fields that I want to make required entry only if one of the check boxes I have is blank. If the check box is blank then I don't want any entries to be required.
For example, I have a form that needs to be filled out only if a machine is running, if the machine is not running then only certain fields need to be filled out and the user will select the check box labeled "Machine not running".
BTW, I'm very new to Access and have no experience with implementing code, other than with excel.