Modules & VBA :: How To Import Data From Text Files Into Access
Nov 6, 2014
I have a text file that details every single incident that happened in the system. This means that it is extremely messy and non-comprehensible to a normal person due to the use of codewords and all.
Is it possible to scan through the document and insert the data into access, such that the different keywords are put as seperate events?
Ps, the number of characters between each event and data may not always be the same, so seperating them by that is not the way to do it. However, when I open the file in notepad++, I can confirm that each event is 6 lines.
E.g. Line 1 = Event timestamp, Line 2 = Event Name, Line 3 = Acknowledged or not, Line 4 = Acknowledged by who, Line 5 = Event Details, Line 6 = Application Owner.
Basically, the 6 lines are the 6 columns that I would need in my table. So, is it possible to separate out and read every 6 lines of data in the text file?
View Replies
ADVERTISEMENT
Apr 24, 2014
I have a requirement to create a piece of vba that will open all xlsx files in a folder one at a time then import the data in a range (sheet1!A1:G14) into a table named Weekly Input.
View 4 Replies
View Related
Aug 7, 2015
I have files that have extension of TSV which are text files but viewable in exel. I figured out a way for the user to click on a button in Access which does the following
1. Run Macro in Excel: The macro prompts the user to select the TSV file. After selection, macro opens the employee.tsv file in the excel (with excel being invisible) and saves it as employee.xls
Code:
Sub SaveTSVtoXLS()
Dim myPath As String
Dim myString As Variant
Application.DisplayAlerts = False
With Application.FileDialog(msoFileDialogOpen)
[Code] .....
2. Imports the Excel file (employee.xls) into two tables: tblEmployee and tblDepartment using the following codes.
Code:
DoCmd.TransferSpreadsheet acImport, acSpreadsheetTypeExcel12Xml, "qryDepartment", selectFile, True - 1, "A1:C2"
DoCmd.TransferSpreadsheet acImport, acSpreadsheetTypeExcel12Xml, "qryEmployee", selectFile, True - 1, "A1:AE2"
Everything is working flawless except that the user has to select the file three times:
1 time for the tsv
2 times for the xls file
Is there a way that the user can select the file only once (tsv file) or at least only twice one of the tsv file and the other for the xls file?
View 8 Replies
View Related
Aug 1, 2013
I am trying to build a newer database 2010, based on an older one,2000, that has been locked tight and I cannot see the modules to kinda get a reference of where to start. I am trying to find a VBA code that will allow me to import a several text files to one table. The text files are all in the same format but I cannot remove the page headers and footers to get the table to look right. I have attached an example of the text file i am trying to import but it is a stripped down version for information protection.
Also, it appears in the old Database Table once imported as:
J.Smith 1234 01 ABCD ABCD HGJV 2345 ABCDE ABC6 Qual Date Date
J.Smith 1234 01 ABCD ABCD HGJV 2345 ABCDE ABC6 Qual Date Date
J.Smith 1234 01 ABCD ABCD HGJV 2345 ABCDE ABC6 Qual Date Date
J.Adam 1234 01 ABCD ABCD HGJV 2345 ABCDE ABC6 Qual Date Date
J.Adam 1234 01 ABCD ABCD HGJV 2345 ABCDE ABC6 Qual Date Date
J.Adam 1234 01 ABCD ABCD HGJV 2345 ABCDE ABC6 Qual Date Date
If I could import the text files and end up with a table like this, it would be all i need as i could run all the queries i need from this.
View 3 Replies
View Related
Jul 17, 2015
I have the following piece of code for importing the .csv files from a selected folder and then renaming them into 'imported & filename' if succesful and 'failed & filename' if import failes for whatever reason (bad formating, etc.).
The problem is that the first time it encounters a 'bad' file after another, instead of going again to the Error handler, the command
Code:
DoCmd.TransferText acImportDelim, , "Activitate", filename, True
gives me the default MS Access error, namely 2391. I would like it to go the the Error_handler again ang follow the course of actions and rename the files into 'failed' and 'imported'.
Here's the code:
Sub ImportActivitate()
Dim strFile As String 'Filename's
Dim strFileList() As String ' File Array
Dim intFile As Integer 'Number of files
Dim filename As String, sFullName As String, sFilename As String
DoCmd.SetWarnings False
[code]....
Also, how can I make the routine stop cycling through the files after I renamed them all?
View 3 Replies
View Related
Jan 23, 2007
hi
i am importing the text format data files to MSAccess 2003 by using import option. but the problem is text data will change daily so i have to update the files daily. can we do this programatically.
Solution without useing DSN is prefered one if we don't hvae other option then i will go with that
Thank you
View 3 Replies
View Related
Mar 17, 2014
I want a string of code that allows me to import a series of delimited text files into access using VBA. I have the first bit of code down:
Code:
DoCmd.TransferText acImportDelim, deltxtimptbl, "Delivery(local)", "msfs3109data1shareeveryoneprorep ranhistDelivery" & currentdate & ".txt"
The text files hold data for a specific days work. Each day has its own text file. I would like to be able to import the text files within a specific date range, specified by the user. Below is the total code i have for my form button:
rivate Sub Command0_Click()
Dim startdate As String
Dim enddate As String
Dim currentdatex
Dim count As Integer
count = 0
[Code] .....
View 12 Replies
View Related
Dec 18, 2004
Hello everyone!
Here is my problem:
I have an Access database that contains a table with three columns (A & B & C). Field A is for code values and field B is for the value for that particular code. Field C holds the case number. I have a folder that contains the information for over 5000 case numbers. Each case number needs to be placed inside of the table. Considering there are 5000 case numbers, I dont want to use the import wizard 5000 times.
Furthermore, the text file only has two columns (for A and B).
I am trying to create a VBA that will append rows to the table by going into each file and placing the information into the table. The first row for each file contains the case number. So when the VBA runs, it should open the text file get the case number from the first row (field B on the text file) and place that in the case number field of the table for the entire file; and then repeat this action for all of the files in the entire folder.
Any help that can be provided will be greatly appreciated.
Thanks.
View 13 Replies
View Related
Jan 18, 2013
I'm having a number of tables in Access which I want to populate with data from excel/txt. In my import files I have some columns which contain alphanumeric data, like 0001 or XYZ0.
I've defined these columns as text in the definition of my table, however whenever I'm importing the text file, it converts those rows that can be read as a number to a number prior to storing it in my table. Hence values like 0001 becomes 1. Which is absolutely not what I need.
How I can prevent Access from doing this conversion? Why does it do the conversion anyway? I wouldn't expect any conversion since I defined the column as text...
When I import the same txt file into a new table (created during import, where I also define those columns as text) everything goes fine, 0001 stays 0001, but I don't want to remove my table and redefine it during the import everytime I need to import new data.
View 9 Replies
View Related
Jul 19, 2014
They are receiving e-mail with some data that they want to transfer to access database to track. The one think they can do is copy past, copy paste. That is a lot of data to copy and paste. The date looks like this format
Field1
Text1
Field2
Text2 (text2 can be more than 255 char)
Field3
Text3 (text3 can be more than 255 char)
Field4
Text4
Field1
Text1
Field2
Text2 (text2 can be more than 255 char)
Field3
Text3 (text3 can be more than 255 char)
Field4
Text4
and so on.. It can be 50 records
I am thinking they can copy this to the text file. Then the code form Access grabs the text file and imports to access table with format below.
Field1 Fied2 Field3 Field4
Text1 Text2 Text3 Text4
View 14 Replies
View Related
Nov 24, 2014
I have an excel spreadsheet, that has a long list of names and unique numbers (of medical lab results)
I have another folder which has many text files (the actual lab reports), each of which has a file name that corresponds to one unique number in the excel spreadsheet.
How can I import the content of the text files into a single memo field (e.g. "LabResultContent") in the original datasheet?
View 4 Replies
View Related
Sep 10, 2013
I have a VBA code to import mail from Lotus Notes into Access. The database user is able to read his email inside Access, similar to any email program.
Unfortunately, when I use the GetItemValue (lotusscript) method to read the body of the email message, Notes will render the Rich Text information as Plain Text, and I end up with no formatting information (bold letters, underline, text color, etc.)
How to import messages from Notes to Access and keep the text formatting? I am storing the data in a Rich Text Memo field in a table. I have found code to write HTML (MIME) messages, but not to import them into Access.
View 2 Replies
View Related
Jul 20, 2015
I have a folder that gets updated with a few new xml files every day. I need to import the data in these files into a table. The names of the files to import is in a field (FName) in a table (tblFiles).
The code that loads up the files is this:
Application.ImportXML DataSource:="C:ImportXML FILES" & FileName & ".xml", _
ImportOptions:=acAppendData
Up until now I specify the name of the file in an inputbox, so I have to enter a bunch of names to get it done.
I am looking for a way to get the filename from the table and then load up the file automatically.
View 1 Replies
View Related
Aug 2, 2013
I'm trying to import a text file with 273 fields into two tables. I've been able to do this with the code I found on an old thread and I'm now trying to accomplish everything with one step. The file I'm importing is tab delimited text file. With this current code I'm only able to populate the first record in the table and then I get error message. (Run-time error '3265') (Item cannot be found in the collection corresponding to the reqested name or ordinal).
Code:
Public Sub ImportTextFile()
' to use the ADODB.Recordset, be sure you have a reference set to ADO
Dim rst As ADODb.Recordset
Dim rst2 As ADODb.Recordset
Dim strFile As String
Dim strInput As String
Dim varSplit As Variant
Dim intCount As Integer
[code]...
View 4 Replies
View Related
Aug 14, 2015
I need to import 300+ individual .txt files into a MS Access DB table (named "tbl_input"). Each of the the .txt files have a naming convention similar to this:
Pink_Floyd_YYYYMMDD.txt
Because this initial import is so large and I would like to avoid doing it manually, I need to be able to:
import each of these files into a single table
delimit the text in each based on the "|" symbol
add the filename into an empty field
View 1 Replies
View Related
Dec 4, 2014
I get XML's from a site and want to import the data to Access. If I use the native import then I get multiple tables and the data is a little jumbled. For instance: I get 1 table with track names and a different table for track numbers with no way to relate the to accurately. I would like to be able to parse out the XML and have it update my table as it goes so I have less "junk" in my DB. I just can't figure out how to call out the XML tag and tell it to copy that info to the correct field.
View 1 Replies
View Related
Aug 22, 2014
I have a form which i use for a user to select an excel file they want to import and then click a cmd button to import the file into a table which works fine, however i want to append a date into a date field from an unbound txtbx before the file is imported so it will look something like;
id;date;excel info;excel info;excel info.
View 7 Replies
View Related
Aug 23, 2005
Every time I try to import a CSV file into my Access database it crashes. I've tried repairing it but the repaired database crashes as well. Any ideas on what could cause this?
Thanks.
View 8 Replies
View Related
Mar 3, 2006
Hi I have a few .csv files that i would like to upload into an access db. I saw an example for DTS, but since i dont have sql server i can't go that route.
Since i have some .csv Files where the file name changes on a daily basis, is it possible to upload them all with some wild card function. there is already a table with the fields already predetermined, and all i basically have to do is just load them all up at once.
please let me know if you have a solution.
View 2 Replies
View Related
Apr 1, 2015
I have a form on access which allows users to upload csv files.
The files can be in any layout, so the field names and the number fields will always be different each time.
This can cause issues on data types, as access assumes a certain data type for a field, but the data may not always reflect that.
For example telephone numbers, access assumes this is a numeric field, however sometimes there will be symbols in this field such as +44. Which then causes import errors.
Is there any way to import these files without getting these sort of errors?
Currently the import process uses a simple TransferText method
DoCmd.TransferText acImportDelim, , "Original Data", Me.filelist.RowSource, True
This imports the data into a new table called 'Original Data'.
I had the idea of saving the table structure of the csv being imported (Importing the data with errors, then deleting all the records to just leave the structure) However I can't find a code to change the data types of that table to TEXT format, when I can't tell what the field names will be.
This whole thing is an automated process, which why there are loads barriers btw.
View 14 Replies
View Related
Jul 22, 2015
I am trying to write a VBA Module that will look in a directory for Excel files with a specific file prefix, and then import specified cells into a temp table. Once it processes the first file, it copies the file to another folder, and then kills the file. However, when I run my current code, it goes through the loop the first time, but fails on the second attempt, because it is still looking for the first file it came across even though it has been moved. The code is pasted below:
Sub Count()
Dim xlwrksht As Excel.Worksheet
Dim xlWrkBk As Excel.Workbook
Dim nIndex As Integer
Dim strMvPath As String
Dim mvPath As String
Dim strFile As String
[Code] ....
View 6 Replies
View Related
Jun 27, 2012
Im familiar with Ms Access, but have never used VBA or Scripts. I have 37 Excel files with the same data and would like to import into one file. Data will be received on a monthly basis into the same directory and I would like to automatically upload the data into the same file in Access.
View 1 Replies
View Related
Jul 12, 2015
some code I've come up to in order to import multiple excel files each of them with a different number of worksheets into an access table. The procedure is called from an Access database. The problem I have with the code is that when it encounters a workbook with only one worksheets (e.g. Sheet 1) it gives the error that "Sheet 2$" is not a valid name. When geting to a workbook with 2 sheets it says that "Sheet 3$" is not a valid name and so on and so forth. Is there a way to "check" the number of sheets in the workbooks and when it has only one sheet to transfer it and go to the next file?
Below is the code:
Code:
Sub ImportExcelFiles()
Dim strFile As String 'Filename's
Dim strFileList() As String ' File Array
Dim intFile As Integer 'Number of files
Dim filename As String
Dim path As String
DoCmd.SetWarnings False
path = "D:Tranzactii"
[Code]...
View 3 Replies
View Related
Jul 1, 2013
how i can import database files from ms access to visual studio?
View 3 Replies
View Related
Mar 25, 2014
I have a lot of Excel files and each of them has 3 sheets that I would like to import in Access 2010. How can I import them without having to do one by one?
I always get error on
Code : Application.FileSearch
View 1 Replies
View Related
Jan 23, 2008
Hello,
I have some data in excel which I am importing it into MS Access 2002. Each excel file (one worksheet per file) is imported into separate tables.
I want to combine all my imported tables into one table. Is that possible, if yes then how and if no then what can be done to get single table after impoting data from various excel files.
Cheers,
Mandeep
View 14 Replies
View Related