Modules & VBA :: How To Open Table In A Single Form
Dec 15, 2014
I am using Access 2003. I would like to be able to open a versatile form that can open any selected table in data sheet form. Currently I am using Command Button with the names of the tables as the trigger. Looking for VBA that would change the form's Record Source to a selected table and add all the fields of that table to the form on open. I figured that I can use the OpenArgs to get the form Record Source to be assigned, but how do I assign all the fields of the table to be dropped into the form?
I Work for an NHS organization. A department here orders prescriptions and sends them out to Gp Surgeries. I have been tasked in designing a database to make this easier for them.
Prescriptions arrive on a Pallet. Each pallet has 100 Boxes of prescriptions on it. Each box Contains 2000 Individual prescriptions. I have a table which contains the following:
Box Number Serial Start Number Serial End Number
When the user enters the first box number and the serial start number, i need it to calculate the serial end number and insert another 99 rows into the table and also calculate the serial start and end numbers for these other 99 records.
I have a Project form, which holds StockArtProduction_Subform in datasheet view. I need for them to be able to click on the ID in the StockArtProduction_Subform datasheet and it open a single view form (StockArtProduction) with the correlating ID.
Ideally, it would also work for new entries in the StockArtProduction_Subform, but the StockArtProduction form would have to "auto populate" (did I use it right?) with the ID of the currently open Project form.
I am building a simplified re-order point system - if inventory position drops below a certain level (the yellow level is this case) one or more purchase order lines has to be created in another table.
I have one table with the following field and data:
ItemId Red Yellow Green Multiple Inventory position 0001 10 30 50 5 45 0002 5 40 47 5 23 0003 11 20 30 10 5
I would like to generate new records (in another table) based on the above fields and three records.Basically the end result should look as the following:
The logic is quite simple - if inventory position is less than the yellow value new order lines should be created in multiple qty (based on the multiple field) until the aggregated value (in table 2) is above the green value.The priotization value should be based on the start inv (in tbl 2) compared to the values in red, yellow and green in tbl 1.
I am trying to create a form with a button attached to each record that would allow the user to click the button and it would automatically open outlook and fill in the TO:, SUBJECT: and BODY: fields. Here is the code that I currently have:
Code: Private Sub Command33_Click() Dim strEmail As String Dim strMsg As String Dim oLook As Object Dim oMail As Object Set oLook = CreateObject("Outlook.Application") Set oMail = oLook.CreateItem(0)
[code]...
There are two issues I keep running into:
1. This code opens outlook and populates all of the fields but pastes the email incorrectly. Instead of pasting just the email (email@email.com) it pastes the html tags as well (email@email.com#mailto:email@email.com#) which means that the user would have to delete everything between the #'s in order to send the email every time.
2. I currently have the email BODY pulling from a table but this obviously limits what I can do. I would like to simply encode the BODY within the VBA code. The setup I am looking for is: one paragraph a blank line a hyperlink to a website a blank line another paragraph
Front end Access 2010, back-end SQL-server 2008 R2.
Normally I retrieve a certain value by Dlookup("myvalue", "mytable",...)
or
strSQL = "SELECT myvalue FROM mytable...;"
Set rs = CurrentDb.OpenRecordset(strSQL, 4)
But is there any faster way to retrieve a single value from an SQL-server table, beside doing doing the select by a stored procedure running through a pass through query, then open a recordset
Set rs = CurrentDb.OpenRecordset("mypassthroughquery")
just to retrieve ONE value?
I could not find something like DLookup("...) for an SQL-Server or in T-SQL.
I have a table with a field that contains IDs, e.g.
123 456 789
I would like to generate a single string from this table, seperated by commas, e.g. 123, 456, 789 and output to a field in an existing table. This will then be used in a SQL statement.I am new to VBA and don't reallly know where to start/
I am trying to return a single value from a table and assign it to a string to be used later but Dlookup isnt working at all. below is the code im using and the error message im recieving is "wrong number of arguements or invalid property assignment"
Code: Sub boo() Dim result As Integer result = dlookup("Definition", "Config", "Parameter = 'Mail Folder'") End Sub
I'm trying to print a Report specific to the record i'm viewing on my Form. I've created a Report linked to the Table - "SCJobsheet".I've created a button in my Form;
Name; cmdSCJobsheet Caption: Print Record OnClick: [Event Procudure]
[code]...
The Report is opening but shows Every record (Not just the one I'm viewing in the Form.
I have a data base that when first opened a login form I created pops up. I am trying to set it up so that when it opens you do not see the navigation pane. once logged in though I do want to have access to that again. I have found other VBA code online but nothing that lets me remove the navigation pane from that first form alone. I have it set so that the Ribbon is not shown when the form opens but does show once a user is logged in.
for the ribbon I used:
DoCmd.ShowToolbar "Ribbon", acToolbarNo
I thought I remembered a while ago reading a code like that for the navigation but not saving it because I did not think it would be needed (I am very new to Access) But now I cannot find it.
I need to save a single record (preferably the current record) as a PDF. I have created a form for my boss to calculate bids. He wants to save each record individually as a PDF to upload into our service software program to attach to client files. I can save a selected record as a PDF if I print the selected record first. We need to eliminate having to print it first as it is just a waste of paper and an unnecessary step. I am kind of thinking that VBA and attaching that to a control button on the form is the way to go, but I am new to writing code and I am completely confused!
I have 3 tables, and I want to enter the data into them using 1 big form. When I use wizard to create form, i manage to add fields from 2 tables, but once I get to 3 tables, the form ends up not displaying anything. I am just wondering if anyone can help me with the above problem, thanks in advance.
I'm building a simple access database to be used in a factory. It's pretty much there now, in the sense that it does all it needs to do, but some things feel a little "clunky". One of these things is the page where new products are created.
When a product is created the user has to specify what raw materials it's made up of and that works great, there is a continuous sub form that lets the user just add a row for every raw material. Having it as a continuous form makes sense as there can be lots of rows or just a few, so it's flexible.
Currently though the labour/time on that page works in the same way. But it feels a bit silly as there are only 3 sorts of labour (at least currently, they might add a couple more later). The labour types are..
- Build - Finishing - Handling
My question is, how would I go about turning the existing continuous row-by-row subform for labour into a single form that just listed those three types of labour (read from my labour type table)? So that it just shows a row that asks for quantity of each available labour type.
Not all products have all types of labour but it would be fine to write a 0 in the labour table for (for example) Finishing against a product that for example didn't need Finishing Labour. Obviously with the current continuous form approach no row would be written for Finishing if the user didn't select that.
I guess I could hardcode a single form to show the three current types, but ideally it would be flexible, coping with new labour types when the users find they need to add them.
I have a database that has all the employees in my company with basic information. I have a auto number set up for each person. I also have on my form a subform with information about the employee's history in the company. I have bin trying for the last couple weeks, to put a button on my form, that will open up the custom report I made for the one employee, in print preview mode. Everything I have tried gives me a error. The main error I get is The database engine could not lock the table "EmployeeT" because it is already in use by another person or process. If I open the report by itself, then I get all my employees. I am looking to just open a single report from the form I am currently looking at.
I have 2 tables. One Named EmployeeT with all the employees basic information. I have a auto number with the field name EmployeeID.
The 2nd table is called IncidentT, which has its own auto number, and records all the problem/incidents with the employee. For example, lates, if the did not show up, or cancelled out of that day, etc. I have the 2 tables sharing the EmployeeID, sharing the relationship. My main form, has a lot of my information and a subform, Like i said. But no matter what I try I can get rid of that error.
The only way I got it to work without the error, is when I go into properties and change the Record Set Type to Snapshot on both the form and subform. But then I can't edit the form or subform anymore.
I'VE objects in ACC2003 as per following : Form name : INVOICECreate Query Name : db_InvoiceSet Reports : 1st Report : Report_Inv1 2nd Report : Report_Inv2 3rd Report : Report_Inv3
All Reports based on Single db_InvoiceSet due to some cross and different manipulation of data for different office department
So, I need is:
Open All Reports in Print Preview Mode with Single Click of Button in Form INVOICECreate
Is it possible to use VBA or macros to open a table to a specific record?
I know how to open a table in database view using a command button. I'd like to have it open to or automatically scroll to and select a specific record, based on the content of the form. This way I don't have to spend time scrolling through the whole table to try and find the desired record.
I want a user to enter a number into an input box and then based on the number in this box a form will be opened with records associated only with that employee number. (All employee numbers are stored as text)The code below opens the form, but it is blank.
Private Sub cmdOpenAddKeys_Click() Dim EmployeeNumber As String EmployeeNumber = InputBox("Please Enter Employee Number:") DoCmd.OpenForm "frmAddKeys", acNormal, , "[Forms]![frmAddKeys]![empno]=" & EmployeeNumber End Sub
I have a list box that displays records. When i double click a record it opens the form needed.However I want it to open the form but default to a specific tab. But when it goes to the tab, the subform within it needs to match the ContractID of the record they double clicked on in the search form?I currently have this which opens the Client Form based on the ClientID of the listbox query search results and the client id of the main record.
Code: Private Sub SearchResults_DblClick(Cancel As Integer) If CurrentProject.AllForms("frm_Clients").IsLoaded Then DoCmd.Close acForm, "frm_Clients" End If DoCmd.OpenForm "frm_Clients", acNormal, , "[ClientID] = " & Me.SearchResults.Column(0)
So in theory If doubleClick then open Client Form on Tab3 where subform Contract field ContractID is matches the ContractID in on the search results?
I have a form that is opened as hidden when my startup form loads. Data gets entered into it from other forms so whenever I switch records the hidden form needs to be opened to the matching record.
To accomplish this, I have been using the DoCmd.OpenForm in the OnCurrent event with the WHERE clause matching the PK/FK. I have had no luck with the SearchFor method.
It seems silly to have to keep reopening a form to go to a specific record when the form is always open already. Plus, I am wondering if it is affecting the forms' load times.
I have searched for bits of code to copy other people better than I, and had some success but I am failing to complete, so it is now time for me to visit you all. I am trying to open a PDF from a button on a subform. The location of the PDF is specified in a field. I want to open the PDF and search for a Member ID criteria also listed in a field on the Form.This is my code:
Code:
Private Sub Text12_Click() Dim strPath As String Dim Searchmem As String strPath = [Notetxt] Searchmem = [MemID]
[code]....
Adobe Reader reports "There was an error opening this document. The file cannot be found." but then opens the file (that's something).So it's the "search" bit that is the problem, and I cannot for the life of me get my search parameter to be used.
