DoCmd.TransferSpreadsheet Range parameter.
I want to import from an xls-File just the second page, titled "Harte". How do tell this the compiler?
Code is:
DoCmd.TransferSpreadsheet acLink, acSpreadsheetTypeExcel8, "Harte", file, True, "Harte"
I just want to run a series of DoCmd.TransferSpreadsheet commands to export several queries to one Excel Workbook with seperate sheet names for each query.
However my problem is I want this to be a new instance of Excel that the user will then SaveAs after it is complete. I don't want to save it to a specific path first because the Db is on a shared drive and My Documents will have a different path for each user based on their user name. (corporate environment)
There must be some way to just have it open a new workbook without saving isn't there??
From Here I want it to open the ".csv" that I chose (for some reason it doesn't now), Import to a table (I can do this part). Then export to the same location on the server with a different file name of my choosing and covert to .xlsx.
Dim fdlg As FileDialog: Set fdlg = Application.FileDialog(msoFileDialogFilePicker)
Do
With fdlg
.AllowMultiSelect = False
.Title = "Select File to Import"
.Filters.Clear
.Filters.Add "All Files", "*.*", 1
[Code] ....
I am extremely new to writing code, but was able to successfully write code that transfers the data in my form to and excel spreadsheet template and saves it with a different name. The code works perfect and without issue as long as Excel is not running. However if Excel is already open the template remains blank and a warning message appears saying that the form is locked for editing. Below is the code I used.
Private Sub ExcelClear_Click()
Dim xlApp As Excel.Application
Dim xlwrkBk As Excel.Workbook
Dim xlSheet As Excel.Worksheet
Set xlApp = New Excel.Application
[Code] .....
I am trying to use transferspreadsheet to import access worksheet and then I want to append additional fields. I am able to import the excel sheet into access, but need appending the other fields.
Code:
Dim fd2 As FileDialog
Dim xlapp As New Excel.Application
Dim xlsht As Excel.Worksheet
Dim xlWrkBk As Excel.Workbook
Dim db As DAO.Database
Dim tb2 As TableDef
Dim fdx, fld As DAO.Field
[code]...
I know its not possible. But Just wanted to confirm. Not at all possible?
Code:
Function PreImport(BookToImport As Workbook)
For Each cell In BookToImport.Sheets(1).Rows(1).Cells
cell.Value = Trim(cell.Value)
Next cell
BookToImport.Sheets(1).UsedRange.Rows(1).Replace ".", "_"
End Function
I have a database scheduled to run nightly. In this database I have a macro that runs a macro. I want one of the arguments to export "T_Update_Log" from the database to an excel file as part of it's nightly macro. When I use "Transfer Spreadsheet" in my macro, it creates a new worksheet in my excel file each night (for example: T_Update_Log1, T_Update_Log2, etc) Instead, I want it to overwrite existing one.
I have also tried "Export" command, but that throws a prompt asking if I want to overwrite the existing excel file. I cannot have any message prompts during my nightly task or else it will stop the whole process. Setting the Warnings to No does not stop this particular message prompt.
Thoughts? Thanks in advance!
This problem seems crazy to me.......
If I create a macro with a single entry consisting of Transferspreadsheet from a single Access table to Excel it exports perfectly. When I call Transferspreadsheet from VBA code it moves some of the data and puts them into seemingly random Excel spreadsheet columns why is this?
This issue first came about when we had to export a table with more than 65,000 records in and so I export using a table name "Sheet1" , "Sheet2" as needed but surely the table name that it comes from makes no odds?
Any help appreciated!
Regards,
Neil
I am using
DoCmd.TransferSpreadsheet acExport, , qName, wFilepath, True
to export a query to a spreadsheet. I am using this method as it seems to solve the problem of memo fields being truncated.
It seems however that using this method if the spreadsheet file already exists (and is of a differant structure) nothing happens and no error is thrown.
Is this correct? - Thanks Paul
Hi.
I developed a db on a local verison of Access 2003 (saved in Access 2000 format). It works great thanks to much help from this forum.
I recently moved the db to a server and tested how it worked when using Access 2000 on a citrix platform. This is important since the users of the db will be using this accursed platform. A few things (vba functions) broke but I deleted the affected code. However, one thing 'broke' that I can't eliminate.
When I click a button on one form I have a transfer spreadsheet command run to export the output of a query to a particular xls file/location. However, in the citrix environment I get an error message "Formats that enable export as html, xls, or rtf are missing from the windows registry".
I'm guessing this has something to do with the citrix server setup. Is there anything I can do on my end to avoid this problem or, as I fear, am I stuffed?
Cheers,
Craig
I'm working with Access 2010 and am trying to use the transferspreadsheet command to output data in a query to an Excel 2010 format file. Here is the line of code:
DoCmd.TransferSpreadsheet acExport, acSpreadsheetTypeExcel12, "q_calldetails_tmp", "c: emp estoutput.xlsx"
It works fine and produces the output file but when I try and open it with Excel I get an error saying the format is incorrect. If I change the extension to .xls it opens with no problem but I need it to be an Excel 2010 format with correct extension.
I need to export multiple queries into a single spreadsheet in different range of cells. Means one query need to be exported from B2:E2 and second query need to be exported from B10:E10. In this way need to export 18 queries' result into one sheet only on different name range.
I am using Access 2007 and need to export data into Excel 2003 format.
I created an MDE file for my application it's a split db when I hit the exit command button on the MDB version it quits the application correctly but when I do the same thing on the MDE version, it leaves the database window open on the taskbar.
View 1 Replies View RelatedWe use our CRM for entering client orders, which is done through our 'OrderEntry' form. On that form we have a subform that we use to enter order lines - as we have a range of products on offer, an order can be made up of one product or anything up to 100.We have an 'amount' textbox on the subform, that the users enter the cost of each line, and as they add more lines the total cost of the order is calculated using a textbox in the subform Footer, with the ControlSource set to =Sum([amount]).
On the main form, we have a Net textbox, that the user will add in the total cost of the order once they've added all the order lines, and providing the =Sum([amount]) textbox on the subform matches the figure in the Net textbox, a button to Proceed the order and go on to the next step appears.
The intermittent problem I have, is that the OnCurrent event I use to show the Proceed button does not seem to fire on its own - but when I stop the code and step through it, it will show the Proceed button without any problems.Here's the code:
(the Proceed button is referred to a 'Command80')
Code:
Dim OS As String
Dim UT As String
OS = OrderStatus
UT = fGetUserType
[code]....
I've made the part that refers to the Proceed button bold, but thought I'd add in the whole OnCurrent event in case there was anything in there that was blocking it.
I added in the MsgBox code at the bottom to make sure the OnCurrent was firing, and that works fine.I've searched through the rest of the code, and there's nothing else in there that references the Visible property of the button.I've been through the decompile process detailed here, and also been through this similar thread with a fine toothcomb and this still won't work.
I've saved the form out as a textfile and then imported it back in, both through the immediate window, and short of importing everything in to a new DB and starting again
so i have MainForm and PopUp (which is also a form). on the MainForm there is a command button that brings up the PopUp form. on this PopUp form, some data will be entered then the PopUp form will be closed via a command button.
whats the code i would need to take a value from a control on PopUp and place it in a control on MainForm, ideally when the command button closes the PopUp form.so i know it has to go on the command button's on click event, probably before the close form code lol... but i cant figure out how to get the value to transfer over..
I would like to display a text entered in form1 (text box) to another combo box which is appearing in form2.
View 14 Replies View RelatedI have a simple query and I want to export it in excel, Comma Separated Value., .CSV
I tried to run DoCmd.TransferText but all of my attempts were futile.
I found it, I must export it as TXT and file suffix insert .csv instead of .txt and it works
Now can I execute this "Saved Exports" through a macro or docmd ?
I insert a picture just to make it more clear.
[URL]] ......
I have a textbox with about 400 characters, I also have 5 textboxes next to it. I want to click a button and I want to transfer the characters to the other textboxes 208 characters at a time.
View 3 Replies View RelatedEveryday I have to generate a report in excel format and I need it to be added to ms access database. I was hoping to do this on a click of a button. Basically, since i have a new data everyday it should be added to the table.
View 1 Replies View Relatedi'm running a module from an access db. how do i import a table from oracle into a closed access db, not the one where the code is running from?
View 1 Replies View RelatedI am trying to export a query to an pre-existing spreadsheet. I am new to VBA and when I implement the following code nothing happened.
Option Compare Database
Public Function Sheet(strTQName As String, strSheetName As String)
Dim rst As DAO.Recordset
Dim ApXL As Object
Dim xlWBk As Object
[Code].....
I am using Access 2010 . I need to format cells inside the Excel spreadsheet
Here is my code:
Dim ApXL As Object
Dim xlWBk As Object
Dim xlWSh As Object
Dim intColumn As Long
Set ApXL = CreateObject("Excel.Application")
[Code] .....
The code "With xlWSh.Selection" returns a run-time error 438 - Object does not support this property or method
When coding, when entering a "bang" ("."), Access normally returns the next piece of code. The code above does not! How to I correct this?
I do have a reference to Microsoft Excel 14.0 Object library....
I'm looking at importing data into a table from a spreadsheet. The spreadsheet will only contain a single column of data, while the table in Access will have a few more, some of which will would be will provided from the form the user is using to import the data, and some at a later date.
Is there a way to do this? I've found the "DoCmd.TransferSpreadsheet acImport" command, but not sure this fulfills what I need, as I can't see a way to set variable data.
Here is a brief idea of what my Table would look like, where where the data to import would be obtained from
Fields:
PromoID, DiscountID, PromoCode, AddedBy, DateAdded, UsedBy, DateUsed
Spreadsheet
PromoCode
Form:
DiscountID, AddedBy (environ("username") query), Date ( DATE() )
Note, the PromoID is a autonumber.
I've got a table with data about a contract. Each contract has his own ID. For each contract i have Information from SAP, Information from a System called geris and a System called pauschale. No I would like to Export that to Excel. With VBA, I would like to transfer the data for each ID to each spreadsheet.
View 6 Replies View RelatedI am trying to format a spreadsheet to import into a Table. To do this I need to delete the top 8 rows and then the 4 rows below the data I need, both areas contain header data. The 4 rows below the data I need are blank but formatted oddly and it is causing issues during import.
Code:
Sub ExcelFormat()
Dim excelApp As Object
Set excelApp = CreateObject("Excel.Application")
excelApp.worbooks.Open ("Z:DataTest.xlsx")
End Sub
The below code exports a table (via a function) to a spreadsheet and saves it in a defined location. the code then opens the file does some work with it then moves it(left the move bit out as it works fine)
so when i run the code it works absolutle fine, table is exported, work is done and file is moved. however if i run the code again it fails, i get the error message out of range. i was originally getting this error when using the .usedrange.copy so i commented this out and now i get it on the next line that tries to work with the file so obviously something is wrong in my logic.
Code:
Private Sub Export2JDE_Click()
Application.Run ("JDE_Export") 'Exports to an xlsx file in the location described in the function.
Dim xlApp As excel.Application
Set xlApp = CreateObject("Excel.Application")
xlApp.Visible = True
[Code] .....