I'm having an issue with the database being read only and a type mismatch due to OpenRecordset. I know this database use to work when it when it was just
CurrentSerNum = RecSet(0) +1 was doing the incrementing.
I need the database to increment in a different way now.
Q=manufacture location 1st number is new=0 or used=1 2nd and third number =82 4th is single digit year aka 2015 = 5 6 and 7th are work week aka 25 for this week 8,9,10 are incremental numbers for the units made that workweek, so 001,002,003. Then week 26 starts the increment starts back at 001.
Code: Private Sub MakeThoseProducts_Click() On Error GoTo Err_MakeThoseProducts_Click Dim NumericSerial As Double Dim WorkWeek As String Dim WorkYear As String Dim WorkWeekNumber As Integer Dim WorkYearNumber As Integer Dim Location As String
i have created a module under module section of my DB My Report Name : "PURCH VB Query"
the code is as follows : (what is want tell you later..)
Code:
Sub Erlick() DoCmd.SelectObject acReport, "PURCH VB Query", True '"PURCH VB Query", acViewPreview, "PURCH VB Query" For i = 1 To 3 DoCmd.PrintOut acPrintAll, , , , i Next i
'This is for creating Seperate Text Per Copy in RptHeader Preview End Sub
i've placed a TextBox in my report named Text25 to the value : =+1 properties-->data-->running sum--> Set to OVer all
i've also set a textbox in my report named CpyWord to the value : =IIf([Text25]=1,"Original Buyer Copy", IIf([Text25]=2,"Duplicate File copy",))
Now what is want is Three Copies of Report with Two copies marked seperately as per above IIF statement
As i want Three Copies with each Rpt-header as Different Text
Possible solutions (ba donna no a script) How do i refer to Report's control after Docmd.SelectObj.... if any facility then i can do easily thru the dazzling for next loop How do i increase Report's control Text25's value, if three copies r there I know there are many events in Report
I've stucked over this point. My all App in db is ready
I am just in the middle of writting a little bit of code that will go through each record in a query and export it into a word table. It's in the early stages but all was working yesterday. I've come to it this morning and ran it and now I get an error message;Run Time error 91: Object Variable or With Block Variable not set.
Code:
Private Sub Command15_Click() Dim MyDb As DAO.Database Dim rsLogin As DAO.Recordset Dim ObjHead As String Set MyDb = CurrentDb() Set rsLogin = MyDb.OpenRecordset("query here")
message "cannot find the object "." ". I have looked in the VBA for the Report I am working with and the form that has the underlying data and cannot find the rouge period! I am creating a label for payment envelopes that is gets its data from the form that indicates payments made
I am trying to use Access 2007 popup calendar to populate a combo box with a selected date. When I select the date on the calendar the above error appears.
Code:
Private Sub Calendar9_Click() 'Set Date to the selected date and hide the clalendar. MAssBDate.Value = Calendar9.Value MAssBDate.SetFocus Calendar9.Visible = False End Sub
When we use DoCmd.SendObject, the object name is always the same name of table, query or report.Can we customize object name to something else more descriptive? For example:
If I send the report "SalesPerSalesman" about John Smith, the object name now is "SalesPerSalesman.pdf" If i send the report "SalesPerSalesman" about Maryann Johns, the object name would be again "SalesPerSalesman.pdf"
However , the object name I would like "SPS_JohnSmith.pdf"and the report for Maryann Johns, I would like as object name "SPS_MaryannJohns.pdf"
Syntax DoCmd.SendObject ObjectType, ObjectName, OutputFormat, To, Cc, Bcc, Subject, MessageText, EditMessage, TemplateFile ObjectName � Name of table, query, Report etc.
Not sure whats going on here, nothing on the table that stops this from working. I just get Run-time error "2448 You can't assign a value to this object" When the code runs.
Code: Private Sub Form_Open(Cancel As Integer) Dim rst As DAO.Recordset MySQL = " Select max(ID) from TblUserQry" Set rst = CurrentDb.OpenRecordset(MySQL) Myid = rst.Fields(0) + Int(Rnd(1) * 10) Me.txtMyID.Value = Myid
I am in the middle of creating a function that populates two unbound text boxes on a form and then uses those unbound textboxes in a query (Total of 3 unbound text boxes - 2 are populated from this function). The saved query object is working fine when I manually execute it (after the unbound text boxes have been populated). However, when I go to set the same query to a recordset I am getting the "Too Few Parameters. Expected 3." error message.
In the saved query I used the build function to use the unbound text boxes as part of the where clause. Below is the code I am trying to execute:
PHP Code:
Public Function Test()Dim db As DAO.DatabaseSet db = CurrentDbDim rst As DAO.Recordset Dim DtBegin As String''FInd the Begin dtstBegin = DateAdd("q", -1, DateSerial(Year(Date), (DatePart("q", Date) - 1) * 3 + 1, 1)) Dim DtEnd As String''find the end dateDtEnd = DateAdd("Q", DateDiff("Q", 0, Date) - 1, 0)
[Code] ......
The unbound text boxes are populated before the query is set to the recordset.
I have been using this export function for the longest time and today it is giving me an error:Object invalid or no longer set.
Code: On Error GoTo Err_cmdTest_Click 'Must 1st set a Reference to the Microsoft Office XX.X Object Library Dim dlgOpen As FileDialog Dim strExportPath As String Const conOBJECT_TO_EXPORT As String = "EXPORT"
I'm trying to display an image which is saved in the table as an OLE Object in a message box. The field with the object is "PowerCurve". This is what I'm trying to do. It allows me to get as far as clicking yes to view the second message box but then it results in an error when it tries to display the image.
Code:
Dim strDetails As String strDetails = DLookup("Details", "ExistingDeviceDetailsQ") Dim strCurve As String strCurve = DLookup("PCurve", "DeviceT", "DeveloperProduct = '" & Forms!DeviceF!D_ExistingDeviceCmb & "'") If strCurve = "No" Then MsgBox strDetails, , "Device Details"
[code]....
I get the error "Object variable or With block variable not set" on the line
Access 2013...Code that has been working is suddenly causing the error "Object invalid or no longer set". Line causing the error is marked.
Code: Private Sub CreateTable() Dim dbsDb As dao.Database Dim tblTemp As dao.TableDef Dim fldTemp As dao.Field Dim rst As dao.Recordset Dim rstRsF As dao.Recordset
I have 2 databases (accdb). Both databases have a loading pop form. Also both databases include the following line of code when the loading form opens:
Code: docmd.runcommand acCmdAppMinimize
This code works great when I open the databases individually. but my problem is that I have a label on the pop form in accdb 1 with its hyperlink address set to accdb 2 and the subaddress set to the macro name.The hyperlink opens the database 2 just fine and it opens the loading form but it doesn't minimize the application window.
I have VBA code that makes use of the Microsoft Office 14.0 Object Library, but if I have this selected whenever I try to do anything in the Form Design view it is constantly freezing. It will literally say not responding" for a minute or so then I will have control again.
I am in the midst of migrating an Access 2003 database to Access 2007 and one of its most important module uses the filesearch object to transfer table data from word files into a table in the databse.
Code:
Option Compare Database Option Explicit Public Function ImportPathTableData() Dim objWord As Object Dim objDoc As Word.Document Dim db As Database Dim data As Recordset Dim bWord As Boolean Dim strFolderName, strNPID, strTemp As String Dim tablenb, table, row, column, i As Integer
I am trying to connect to MS Access from MS word using the following code but getting the above error message:
Code: Sub GetDataFromDataBase() 'allocate memory for the database object as a whole and for the active record Dim myDataBase As Database Dim myActiveRecord As Recordset
I have this below which some people cant run and some people can. All are using 2010 runtime version. Apart from the one guy who can run the macro who has full 2010 version. I have 2010 runtime installed and i can also run the macro fine.
Private Sub Option12_Click() On Error GoTo Option12_Click_err Dim CntlPay As String Dim Lable As String CntlPay = "D"
Basically I have a form where a user has selected a couple values from a dropdown element, and entered a few other text values into the form. I am then trying to grab the values and append them to a table.
Code: Private Sub btnSubmitInputVendorPerformanceForm_Click() 'Button Is part of frmInputVendorPerformance Dim ValueCheck As Integer 'Increments to make sure no errors in entry Dim ErrorShow As String Dim YesorNoAnswerToMessageBox As String Dim QuestionToMessageBox As String Dim DeliveryRate As String
I keep on getting this error. The weird part is that I have exactly the same stored procedure but insted of FinancialYear it has a calendar year. So instead of of having something like '2013', it has 'FY2012 - 2013'. The calendar year SP works perfectly, but this does not.
Option Compare Database Dim objConn As ADODB.Connection 'Use this code to run the SP and extract all the records Public Sub LoadVRData() Dim rsData As ADODB.Recordset
I'm sending out an e-mail (see below). I want to add a cc addressee. However, sometimes the cc addressee will be blank. The e-mail works if the cc addressee field has data. It doesn't work if there isn't data. I tried an IIF statement but that didn't work. How do I can the object to work if the field is blank (null) or has data?
DoCmd.SendObject acSendNoObject, , acFormatTXT, Me.POCEmail, , Me.Email, , "Decoration Issue - Resolution Assistance", "Sir/Ma'am," & vbCr & vbCr & _ "We need your assistance in resolving the following decoration issue:" & vbCr & vbCr & _ "Issue/Necessary Correction: " & Me.Issue & vbCr & vbCr & _ "Member Information " & vbCr & vbCr & _
I have wrote a database in access 2010 and the database works fine for me (I am the db admin with full control).I gave the database to a group in which most of them also have no issue with the file. They are able to use the database with no issues..One of those members gets an error message when completing the initial step in the database: (select a drop down item from a combo box)
Code: The expression After Update you entered as the event propoerty setting produced the following error: Object or class does not support the set of events
Something I cant seem to understand is why is this happoening on 5 machines but not on the 6th, they all have the same PC set up so there should be no error on one particular machine.
When I attempt to create a new DB - by performing Blank Database I immediately get a message 'Object Library not registered'.
If I 'OK' that box and try to create a table, I can do so - create Table in design view.
When I then try to Import external data - an excel file I get the message 'ActiveX component Can't create object'.
I have looked ob various sites for help and forum information regarding these errors but have found nothing conclusive, with specidfic regard to Access 2003.
The version has been loaded on my machine about 1 year as part pf Office Professional but this is the first time I have attempted to run Access itself.
Does any forum member have any ideas as to how this problem could be resolved.
I am currently building a database for the company I work for that is fairly similar to the Northwind Database; however it is made from scratch so hopefully some of the common problems with that database won't find their way into mine.My problem is that when I go to my Orders form, I pick a customer from the main form, which creates a record on the Orders table. When I then go to the subform to choose a product/line item, I get the error in my title ("The LinkMasterFields property setting has produced this error: 'The object doesn't contain the Automation object 'OrdersT.") as soon as a product is chosen from the drop down list.
