Modules & VBA :: How To Show Query Result In Text Boxes
Jun 25, 2013
I have query that creates table with 2 records each with 2 columns (2x2) and they do not have indexed ID,and query is related to combo box in other form so results are not always same but it is always (2x2) and value types are always same,
So how to show those results in text box in form,lets say 4 text boxes ,every value in one text box, i assume that i need to use DLookup() but i was able only to show first record,did not know what criteria put to go to second record.
When i select that query and create report i get what i want but i cant copy those text boxes to form that i want.
I have a form with combo boxes, each combo box further limits the criteria of a query as selections are made. I have a Me.Requery code for each combo box. - This is working great.
Once all of the selections are complete, I need the result of that query to show in a text box. - There will always be only one result.
I have a form with ID, town and address on it. I want to beable to type in an ID, press enter then if the ID exists in a query then populate the town and address text boxes with the correct info..
If the ID doesn't exist, then open another form so the user can choose the site from the list..
At the moment I think I am going about it the wrong way :
I already success to run this dynamic query where the parameters taken from the main form.Now the problem is the query result doesn't show in the subform.But the status bar below tell me that it have 2 records in the subform, but there is no data in the subform, it just Blank.I already apllied the Requery or Refresh to the subform (in the Command Button), but it have no result too.This is the code:
I've created a form with two textboxes and a listbox. What I want to do is to show in the listbox the registers filtered by the 2 textboxes. But I would like that the listbox refreshes while typping in the textboxes.It was no problem to do filtering with only one textbox. The rowsource of the listbox is a query in which I set in the criteria Like [Forms]![Form1]![Textbox1].[Text] & "*"Then I write the code for the change event of the Textbox1:
Private Sub Textbox1_Change() Listbox1.Requery End Sub
With this I have no problem. The problem is when using the 2 textboxes. I write the same in the criteria, Like [Forms]![Form1]![Textbox2].[Text] & "*", on another field but it doesn't work. I also write the code for the second textbox:
Private Sub Textbox2_Change() Listbox1.Requery End Sub
The listbox doesn't filter with both textboxes. When you type in one of them, the listbox filters from it, but when you type in the other textbox, the listbox shows the whole table filtered with the characters of the second textbox.
I have a form with three text boxes and one button. I want to use these three text boxes as parameters for specific query, thus i want a code that has the ability to pass these three value to query parameters or another code to solve this problem.
Ok, nobody chew me out... I know there's over 500 posts regarding calendars on here because I've read just about every single one and haven't found any answers yet. All of the posts that vaguely resembled what I'm looking for had no replies.
Here's what I'm trying to do:
First I've got 4 tables, each has different data including a start date, start time, end date, end time and description. Each table pertains to a completely different subject. The tables are already populated (imported from excel).
I've got a form with a calendar control (Ms Cal 7) in it... and that's about has far as I have gotten.
I would like to be able to open the form and have the calendar show all events for the current date (i found how to make the calendar show the current date, it's just populating the text boxes that I'm having a problem with).
So, here's how I would like it to work...
When the form is opened, you can click on a specific date (or don't click anything and it shows the current date). Then the textboxes show the info for that date.
Example:
Calendar = 4/20/2005 (Calendar control here)
Textbox1 = select from table A where subject="codereds" and start date = calendar control date
Textbox2 = select from table B where subject ="codeblues" and start date = calendar control date
Textbox3 = select from table C where subject="codegreens" and start date = calendar control date
Ok, anybody got a clue on how I can do this because I've had no luck finding it anywhere.
We have a button running a SQL query via VBA, how can I make it so the results doesn't show up in a table/preview?Also, I know it's for the SQL forum but how can I make a text box to show the results of a query to display it on screen?
I have a form (employee info) that requires the user to do a search to find the employee before then editing anything that needs to be edited.
I have a search box that will find the relevant record without any problem, however what I am looking to do is hide text boxes on the form and have them appear only once the search has found the matching record.
If no matching record is found, I would then like a message box that states 'No matching employee, would you like to add an employee' and when the user clicks OK, it then reveals the same hidden text boxes and sets focus to the first one of the bunch.
Now, I have used the 'me.textboxname.visible = True (or False) elsewhere, however, I am not sure how to trigger that after a search.
I assume I am looking at an If statement, but I am not sure how to construct it, hence turning to the experts.
Code: Private Sub txtEmployeeSearch_AfterUpdate() If txtEmployee = DLookup("EmployeeNumber", "tblEmployeeInfo") Then Me.txtboxname.Visible = True Me.txtboxname2.Visible = True DoCmd.GoToControl "txtboxname" Else MsgBox "Employee Not Found", vbYesNo <<<<<<<<<<<<<<<<<<<<<< End If End Sub
I know that there is a massive gap where I have put <<<<<<<<<<<<<<<< - but I am stumped as to what to put in there?
Does anyone know if it's possible to show the results of a query on a form? I have 4 people entering various "outcomes" into a table. There are a possible 8 different outcomes and the one i'm interested in is the "completed" outcome. I would like to be able to show on the form used to enter the data, the total number of "completes" so far.
I have a query which works perfectly fine, it's the report that I'm having issues with displaying correctly.
My report is a daily personnel accountability report that shows where everyone is for the day. Instead of having a cumbersome query like I did before, I have opted to just use the results of the selected drop-down option to move the X to the appropriate box of where so-and-so is for the day.
Using
Code: If [marked_as] = 1 Then Me.Morning.Value = "X" ElseIf [marked_as] = 2 Then Me.Afternoon.Value = "X" ElseIf [marked_as] = 3 Then Me.Evenings.Value = "X" End If
I was unable to get it to work accurately outside of showing the three dummy names under the same column, even though the three dummy names were each placed in one of the three test categories.
I have this set as a private function called when the report loads, which is based on a query that filters down to the exact department or office (depending on the user's selection). Like I said, that part works fine, it's getting the code to accurately display in the correct column.
I am writing an Excel VBA code to connect to an Access db and execute an access query. After executing the query, I would like to display the result in the excel spreadsheet.
I was successfully able to make the connection to the access db using the following code:
Set db = OpenDatabase("file name", False, True, "MS Access;PWD=abcd")
However, I do not know what code to use to execute a query named "qrytest" on the Access db and show the result in this Excel file.
Can anyone teach me how to do this please?
P.S. I searched this forum for about 1/2 hour before posting this. Please excuse me if this was addressed anywhere before! Would appreciate a link, if it was.
i'm a begginer at access, so please excuse me if this question is very basic. i have a multiple table select query which shows me which user has which piece of a equipment at that given time. I also have a form that logs any problems the users have with the equipment, what i want that form to do is show the results of the query based on inputting the users name. ie put the serial number and model number into the relevent fileds on the form. I can get the form to run the query but that just shows it in the query window, i need it to show on the correct feilds on the form.
Hope that makes sense and that somebody can help me.
I have a form on which there is a series of text box controls relating to different frequencies. At the moment I enter a value in to each of these manually.
However, I would like to have an unbound text box where I can paste in all the values (6 or 8 of them) from excel and then press a button and they would be copied in to the individual boxes.
So far I have my design:
I'm not sure where to start with regard to the code as I don't know how to handle delimited text - is it column delimited in excel?
I imagine some sort of loop, such as a do until will be required but again not sure.
ID Up Time Down Time John 18:00 15:00 Kelvin 08:00 08:05 Melisa 23:00 02:00
This is the Table , i need the Query result show IF [Up Time]-[Down Time] is >=3 hrs
Like Below :
ID Up Time Down Time John 18:00 15:00 Melisa 23:00 02:00
IDUp TimeDown TimeJohn18:0015:00Melisa23:0002:00
I tried DateDiff("h",[Up Time],[Down Time]) in Field but POP out with error "Syntax error (comma) in query expression 'Table1.[DateDiff("h",[Up Time],[Down Time])]' " ...
I am building a Inventory Management Application for Tyre Shop. I have SaleMainTbl and SaleDetailTbl both used for preparing daily sale summary. I have Mainform based on SaleMainTbl with TxnDate and Total Amount (Sale) and the TxnDate is in one to many relation with SaleDetailTbl. FormSaleDetail is multiple row(continuous) form that makes billwise summary of each day having -TxnDate--BillNo--ItemSold--Company--Qunatity--Rate--Amount fields. I have inserted this form in FormSaleMainTbl.
So FormSaleMainTbl is Main form and FormSaleDetail is subform. TxnDate in FormSaleDetailTbl is automatically taken from SaleMainForm. I have further added text boxes in Main Form to show company wise sale for each day for which there is a query build one for each company that takes the currently loaded date from FormSaleDetail and calculates the Sale (Sum) of each brand (Company) of Tyres. All these objects are working very fine. However I have to close the MainForm and reopen it for result of query to appear in the appropriate text box in Main form.
Is there way to do this as soon as record is entered or at least at the end of completing the entry of each days sale transactions without closing the form. So the gist of the problem is realtime display of query result in text box on a form or updating the form screen immediately on updating any record or at the most after completing the updating of form but without having to close the form.
I am making a database for my work place where there is telephone counsellors and they need to complete a certain number of supervision hours and a few other categories of hours required for training and several other things. The manager wants to be able to see the total supervision hours and the other categories for a worker when the worker is selected and the date range for the queried time entered.
I have a form that has quite a few items on it. I have two text boxes that allow me to enter a start date and an end date, I have a combo box that allows me to select a worker and I have 3 text boxes that I want to populate with the sum of 3 separate columns in another table when the date is entered and the worker selected so the manager can see, at a glance, how many hours each worker has done on the separate items. Maybe I would need an update button at the bottom that, when clicked, would perform the required calculations.
I have 3 queries that return the required information but I need to get one of the columns from the query results put into each of the 3 text boxes. Basically, when I click on the buttons the right query appears, I just want column 3 (which is a sum column) to get put in the corresponding text box and I want all the boxes to display the sum of their corresponding queries when a date and person is selected.The form is called frmSearch, the 3 queries are called qry_sumisshours, qry_sumisshours and qry_sumtcshours. The 3 text boxes I need to get populated from the queries are called txt_ results_ sv_ hours, txt_results_TCS_hours and txt_results_iss_hours.
I have about 25 text boxes that get populated based on a financial transaction; quite often about half of them are empty. i wanted to gray them out if they are emtpy (.enabled = false). I could put a series of IF statements in the vba for each one, but its bulky and time-consuming. I've done for each record in tables and recordsets. Is there a way to do a for each textbox on a form?
I am having a little problem with making an audit trail for a form with some unbound text controls on it.
Since .OldValue won't work on unbound text boxes, google suggested that I put the old value in the control's tag property. This is what I came up with:
Code: Dim ctl, tbox As Control Dim strName, strOLD, StrNew, NewTag As String Dim NextOne As Label For Each tbox In Me.Controls If TypeName(tbox) = "TextBox" Then Select Case tbox.Value
[Code] ....
The first loop is supposed to dynamically assign the tag value, with whatever the textbox value is, however it doesn't. I've asterisked out the line i think may be the issue.
I have a form with three text boxes and i am trying to figure out how to ensure atleast one of these boxes is required and would error if none of these are completed.
I have a listbox where the rowsource is a SQL statement. I didn't know if I should try that or just use a query for what I am doing. The listbox is based on our client table, which is a huge number of people, and is showing 3 out of 5 fields.
I have two text boxes, one for first name and one for last name.
I would like the listbox to filter as I search by either field OR by both. Right now, I have the on change event for each with a SQL statement with a Like '*" & Me.textboxname.text & "*' and then a Me.clientlist.rowsource= at the end. So I can get each text box to filter the listbox individually, but I can't get it to filter with both. I think it is a matter of the focus changing, but I could be wrong.
The VEH and POS are just going to be Labels in a form....no prob. Each Soldier's Squad and Team (for mounted Vehicle and Position) are stored in the Personnel Table. The below query is for vehicle A7 (ACTUAL would be the same as TC above). The query works. I just need to know how to get the result to display in a text box. What I'm planning on doing is creating text boxes for each posistion with these small select queries, so when I update the SQD and Team in the Personnel Table it updates on this form. Or is there an easier way to do this?
Dim strSQL as string strSQL="SELECT [tblPERSONNEL]![RANK] & " " & [tblPERSONNEL]![LAST_NAME] AS NAME FROM tblPERSONNEL WHERE (((tblPERSONNEL.SQD)="A7") AND ((tblPERSONNEL.TEAM)="ACTUAL"))"
Whats the best way to show the text result of a combo box selection when displaying the information through a query? I notice the table is also reflecting only the numerical ID result of the selection so I'm not sure how to take this result and display it as a text result to the user.
