I have a table and a form called patient demo. It displays last name first name and address city state zip. I created another table and form called insurance as radio buttons i have the following self, spouse, child, other. It also displays last name first name address, city, state and zip as text boxes. what i want the radio button to do is when i click self it will copy all information from patient demo to insurance form. I tried to do this several ways but every time i change the information in the insurance form it also changes the patient demo which i dont want it to do because i want to edit that box without changing patient demo. any ideas.
I'm somewhat new to access and I'm having a small problem. I have create a web based form via Frontpage 2003 using the access database wizard. In one part of my form I have 6 different options (radio buttons) for a user to select. I want the user to be able to select "multiple options" that apply not just one which is all it is doing right now. How do I change this to allow multiple selection? I opened up my results table and went into the design mode and I can't figure out where to allow multiple selections. Thank you for any help you can provide.
When a control like a check box or radio button is on a form, how can you make the size of the actual control bigger? When changing the size in Properties, it only increases the size of the black border.
I have a database with 1 main form. This form has a bunch of lookup tables that are being displayed in comboboxes on the form.
What I want to do is create another form that has a series of radio buttons that when selected show the specific lookup table which can then be updated/modifyed.
I am unsure where to start. When they select one button I need the table to open "sub form?", "List Box?", and then when they choose another table the first should close and the next open etc. I want all of this to be done within 1 Form.....
I'm trying to build a database of car dealers while using Access 2010. They only sell three types of cars. Once the user select which car dealer they want to look at, I hoping to populate three radio buttons based on values from the database. From what I've read, it seems that the radio button, while using the option group wizard, that the radio buttons are meant to populate a database field, rather than having the database record populate the radio button.
how to do this, so that I am able to show three radio buttons in my form to show which three types of cars this specific car dealer sells?
I have been writing a database for a medical facility. Currently, I have a box to check if a patient in the database is admitted. What I would like to do is create two radio buttons: one to admit and one to discharge.
When the patient is discharged, I want the data in some of the fields on the form(s) to clear, but not all the fields.
I realize the I will need some scripting here.
As an example: the fields for Unit and Room number will clear upon discharge. As well as fields for diagnosis and informed consent signature located on another form within the same table.
I am using an Access database for a foreign language dictionary project.
One of the forms I use is populated by a query (qryLemmaTable) to retrieve information from tblLEMMA.
This form works precisely as I intend it to work, but there is a glitch on it that is driving me mad.
The form in question has an option group with 11 radio buttons that correspond to the parts of speech associated with each word in tblLEMMA.
When I click on the button optAdjective I apply a filter and the only records that are displayed are adjectives. (The same applies for Nouns, Verbs, Prepositions etc.)
Here is the glitch: even though the radio buttons apply the filter correctly, no “black spot” appears in the button. Other signals on the screen let me know what word type is selected, so I can accomplish what I want, but I want the “black spots” too!
Perhaps this will be a clue: For each radio button I use the following code in the GotFocus event. Me.FilterOn = False Me.Filter = "wordtype = 'A'" ‘(or N, etc) Me.FilterOn = True
And this for the Lost Focus event Me.FilterOn = False
I have a form called frmBillingExport. On that form i have a button called cmdExcel that when clicked exports all the records to excel.
On the form i have a sub-form called subfrmBillingExport and in that form there are lots of fields and one of them is a tick box called blnInvoiced. The subform is also in datasheet view.
Its also worth mentioning that the subform runs off a query that displays the values based on criteria provided on a previous form.
What i want to do is when you click cmdExcel I want a window to pop up to say "Are you sure you want to invoice all of these bookings?" with buttons for Yes and No. On the Yes click i want it to tick the blnInvoiced for all those records and then only export it so i assume take whatever code is suggested and place it before that export happens.
Populating the table in db3 with a subset of records from db2.
I've gotten as far as opening the db2 and copying the table structure. Can't figure out how to run the query using execute rather than docmd.openquery.
Code: Dim appAccess As Access.Application Set appAccess = New Access.Application appAccess .OpenCurrentDatabase "DbPathString" 'copy the table structure to dbQn, overwrites any previous with same name
I'm trying to add a value from access into a combo box on a web page. I can get the combo box to refresh, but not add in a value..The HTML for the combo box is
I get the message "The expression On Click you entered as the event property setting produced the following error: Class does not support Automation or does not support expected interface"
I receive the message on a PC running Windows 7 Professional using the Access 2013 Runtime. This pc does not have Access 2013 installed.On my pc, I do not get the error. I have Access 2013 installed and run Windows 7 Professional SP1. The "code" which gives the error is as follows and is invoked by clicking a button on a form
Code: MsgBox "1" Dim rst As ADODB.Recordset MsgBox "2" Set rst = New ADODB.Recordset MsgBox "3"
[code]....
The error takes place after Msgbox "2" and before Msgbox "3".The strange thing is that I can run without a problem a sophisticated software package on the pc which gives the error, using Access 2013 Runtime. This package I converted from Access 2003.
I have just started to develop a database that will export data directly into a word template. I have used Word automation quite a lot but I'm new to trying to automate Word from Access.
It's going OK at the moment, I have got the db to open up the template, write data and then close. My objective is to add the data to multiple tables within word. So I have created several tables in my word template and then tried to select these tables and write to the them. Everything is thing for the first table but for any other table I get an error message saying that the member of the collection doesn't exit i.e. the table isn't there. I select the table using:
Code: objWord.selection.tables (2).select
I then used:
Code: objWord.selection.tables.count
To show how many tables were in the document and it doesn't matter how many there are, it always says there is 1 table.
why it can only see 1 table and what I can do to get around it?
I have programmed a letter using automation to Word VBA. The letter works like a mail merge so it might cycle thru several records when it runs. I've separated each letter in the document with a section break. I'm having a problem with the header. I've successfully added a header, but when it moves to the next record, it replaces the header in the entire document with the current record. I want each section to insert data from that record. How can I fix this? Below is a sample of my code (note: the linktoprevious doesn't seem to work either).
x = 1 'Create Header With ActiveDocument.Sections(x) .Headers(wdHeaderFooterPrimary).LinkToPrevious = False .PageSetup.DifferentFirstPageHeaderFooter = True
I am running Office 2010 but at one time also had Office 2013 installed on my Windows 7 64 bit OS PC. The first attachment (AccessProblem) shows the error message that I get when it hits the
Set olApp = CreateObject("Outlook.Application")
line. I get the automation error - library not registered error. The second attachment (Access2Problem) shows the references that I have.
I developed a finance tracker database for tracking project revenues and costs (forecast and actual amounts). I have a form where we enter a new Work Order in the DB. This Work Order form has a continous subform where we create all the billing periods needed for the life of the Work Order. Once the billing periods are created (opened) we can then add our revenue and cost forecasts for each period. We have a Billing Period lookup table that has our billing periods with their respective start and end dates (which usually begin around the last week of a month and end about 3 weeks into the next month).
For the purpose of this question, lets say we only enter the required WO_Number and WBS_Code (Composite key) and the Work Order Start_Date and End_Date. I want to click a button to runs some code to automatically create all the billing periods for which their start and end dates fall into the Work Order start and end dates.
For example, say a Work Order starts on 5/1/2013 and ends on 7/31/2013
The billing period dates in the Billing Periods lookup table are as follows: May-13 ---> 4/22/2013 - 5/19/2013 Jun-13 ---> 5/20/2013 - 6/23/2013 Jul-13 ---> 6/24/2013 - 7/21/2013 Aug-13 ---> 7/22/2013 - 8/18/2013
Then we would need the following billing periods created in the Work Order subform: May-13 Jun-13 Jul-13 Aug-13
I don't even know where to start on this. Is it possible to automate this process with the setup I have? If so, how would I structure the VBA code/logic to use the billing period lookup table and create entries in the subform for all the billing periods that fall into the duration of the Work Order.
The attached DB is a stripped down version with only the tables and forms needed for this problem.
I would like to have 3 buttons on a form. When clicking Button1, Button2 and Button3 should be shown and Button1 hidden. When clicking Button3, Button2 and Button3 should be hidden and Button1 shown.
How can I do this when it is not possible to manage the object being clicked? I tried the following which did not work because of managing an object clicked is not allowed.
I have a form I use to search for clients when I hit a command button, using surname etc. I'd like a yes no button to pop up rather than the clunky ok button route I currently have. I'm a beginner with VBA and most this I've gleaned from internet.
If there are matching results, everything is fine. If there are no matching results, I've managed to get my desired messagebox come up by using the code below in the onload event of the resulting search results form, however the yes no buttons do nothing and the results form loads blank as though no records were found.
I'd like Yes to send users to the client input form, and No to return them to the search form.
Private Sub Form_Open(Cancel As Integer) If Me.Recordset.RecordCount = 0 Then MsgBox "Do you want to add a new Client?", vbQuestion + vbYesNo, "No clients found" Select Case intanswer Case vbYes
I have a form called departments . one that form i have 5 buttons. I want this form only to open when some logs onto the database . The buttons represent each department ...
1. sales 2 purchasing etc etc
Is it possible to assign a password to those buttons so each department has security to their own form ...
I did a search and found this thread, and the only problem i encounter is the min max buttons are gone though it was set up as both enable, how to show those buttons.
To briefly explain my database; it is a bespoke referral management system within a hospital. Each record on the database contains patient demographic information, as well as information on their referral (i.e. date of referral, date of assessment, date of commencing treatment, discharge date etc.) Therefore, the same patient will appear multiple times in the database, with each separate record corresponding to a unique referral pathway.
The database forms are split to show patient information at the top, with referral information shown in a subform. I am trying to add navigation buttons to the subform that will allow the user to scroll through the referrals corresponding to the patient currently displayed on the main form.
Each patient has a uniquely identifiable number associated with them, and so it seems straightforward enough in my mind to have a button that will search for the record in the database where the patient's number matches the patient number of the current record, and where the referral date is minimum (for "First Referral"), maximum but less than current (for "Previous Referral"), minimum but greater than current (for "Next Referral"), and maximum (for "Last Referral").