I have managed to export the data that I want into a spreadsheet using a command button.
Once my colleagues have completed the spreadsheet, I need a command button on a form with a file search dialogue box which will allow them to transfer the spreadsheet back into the database - updating the relevant records rather that over writing them.
Is there a VB code/Macro I can use which will allow me to do this?
I'm trying to design a command button on a Form so the user can import the contents of an Excel spreadsheet to an existing Table in Access with the click of a button. But, i'd like the imported data to overwrite the existing data in the Table and not append to it. I've considered using linked tables but apparently you can't set Primary Keys when you do it this way.
View 4 Replies View RelatedI'm looking for someone to help me with a solution to my problem of importing data into a data table.
What I'd like to do is have a command button on a form. When this button is clicked the records in a table are cleared out. Then I'd like for a browse window to come up to locate an Excel file. The user would select this file and the data would be imported into the data table that was just cleared.
Can this be done without too much trouble?
Thanks, Paul
Someone please help!!!
The "file of type" does not display the excel type. . . only type database and ODBC. I'm using MSAccess 2000. Does it not support this type of import? Is there an add-in I need?
Thanks
Cathy
I am creating a database. I have all my forms, queries, tables, reports just as I need them. However, I would like to have a command button on my switchboard that will pull from a query to feed to a Word document (that's actually a letter on my company letterhead). I know a Macro has to be involved with this, but again, I have little to no knowledge of Macros. Also, I would like to be prompted to enter a client ID number when I click on this command button (because I only want to print a letter for a new client, not all of them).
View 4 Replies View Relatedi am trying to add an import command button to a form so that personnel not familiar with Access can simply push the button and then select the file to import. I want it to import information to a specific table by replacing all records in the current table with the import. I am not the best at coding, but I can understand enough to figure out what I may need to do.
I will be exporting a table to excel from the database. Multiple people will have this database and often times will not be able to access a shared database, so I need to export the table and then set up a way for them to import the excel document into their database by deleting the information in the old one and then updating to the new one.
Is there anyway to import my excel spreadsheet which contains command buttons with vba code into access?
View 2 Replies View RelatedIs it possible to have a command button on a form to run the Text File Import Into a Table Wizard?
View 13 Replies View RelatedI am trying to open a workbook with a command button on a form however the path to the file is giving me a fit. The path for the file location contains spaces and I am going blind trying to figure out how to rectify the path. Heres the line. I am sure someone here will see this problem quick! Thanks.
Private Sub Command0_Click()
On Error GoTo Err_Command0_Click
Dim stAppName As String
stAppName = "Excel.exe N:OPSCOMMONOpsResearchContact CenterDI CCL Reporting dBApps by Agent.xls"
Call Shell(stAppName, 1)
Exit_Command0_Click:
Exit Sub
Err_Command0_Click:
MsgBox Err.Description
Resume Exit_Command0_Click
End Sub
Heres the mess I made out of it:
stAppName = "Excel.exe N:OPSCOMMONOpsResearchContact" & Chr(32) & "CenterDI" & Chr(32) & "CCL" & Chr(32) & "Reporting" & Chr(32) & "dBApps" & Chr(32) & "by" & Chr(32) & "Agent.xls"""
:confused:
Is this possible? A command button when click will open an excel file... :rolleyes:
Cheers!
Sheila
I have a button on a form, to open Excel, I need to open the relevant file at the same time...
Dim oApp As Object
Set oApp = CreateObject("Excel.Application")
oApp.Visible = True
My file is located...C:ship info imeline.xls
any ideas please...
I am trying to open MX Excel using a command button. I have tried using a hyperlink a various codes that i have found online with no luck. The Excel file is being used by the Access as it bring data from the spreadsheet a displays it within a subform. (I think this is where the problem occurs) The subform displaying some data from Excel is working fine but when i click my hyperlinked button i am met with errors and the file will not open.
View 6 Replies View RelatedI am trying to open MX Excel using a command button. I have tried using a hyperlink and various codes that i have found online with no luck. The Excel file is being used by Access as it bring data from the spreadsheet and displays it within a subform. (I think this is where the problem occurs) The subform displaying some data from Excel is working fine but when i click my hyperlinked button (To open the excel file) i am met with errors and the file will not open.
View 1 Replies View RelatedWhat would the VBA command line look like to export a report to Excel using a command button ?
View 3 Replies View RelatedI want to use command buttons to open two separate .csv files in the same excel workbook on different tabs. Is this possible?
View 4 Replies View RelatedIn Access, it is possible to create a query from a command button and export to excel?
View 1 Replies View RelatedI have a Word 2010 document linked to an Access 2010 data source. When a user clicks a button in Access, the Word document loads and performs a email merge using the below VBA code:
Private Sub Document_Open()
With ActiveDocument.MailMerge
.Destination = wdSendToEmail
.SuppressBlankLines = True
[Code] ....
However, as the .mailsubject part is not in the loop it is only retrieving the first Return Code. I have tried to integrate in the loop to no avail. Also, how do I add static text to the Subject, I need something like "Your Return Code" + "Return Code"..
Hi All,
I have three excel files (ActualHires.xls, ActualPromotions.xls and
ActualSeparation.xls). These are password protected files (with the
same password). They are linked to an access database and whenever the
files are opened, one must supply the password and click the 'Enable
automatic refresh button.' What I was wondering was if this could be
done in access with a command button. I have pasted some code below
that I found but now I'm getting an error.
This is the code:
Dim BookNames As Variant
Dim B As Long
BookNames = Array("O:ExcelFilesActualHires.xls",
"O:ExcelFilesActualPromotions.xls",
"O:ExcelFilesActualSeparations.xls")
For B = LBound(BookNames) To UBound(BookNames)
WorkBooks.Open FileName:=BookNames(B), _
UpdateLinks:=3, Password:="*******"
WorkBooks(B).Close SaveChanges:=False
Next B
But when I click the button, I get this error:
Run-time error '9' Subscript out of range.
and this line is highlighted:
WorkBooks(B).Close SaveChanges:=False
Any help would be greatly appreciated.
Thanks.
I have created a database for a church cemetery. It contains the usual names, birthrates deaths, etc.... I have also created a map of the cemetery in PDF format with the lot number highlighted which is assigned to a particular record. I did the same in excel with a layout of the lot and a JPEG picture of the grave marker. In my table I created Three columns - Site Plan, Lot Plan, and Grave marker. I insert the specific site plan, lot plan, and jpeg picture using the "insert object" in the table. On my form after a search, I have created three buttons.. Site Plan, Lot Plan & Grave Marker.
I have looked and experimented trying to assign these command buttons to open these files on the form. I don't have any experience with macros or VB code.
I'm trying to import an excel file that includes a column of Part Numbers that I am interested in. I am trying to import that excel file into an access table called 'TableForImport'. That table has a column called 'PartNumber'. Thing is it's not just one Excel file that I am uploading...although I am uploading one file at a time. So the column name for each excel file table is different but they all have one column for the Part Numbers that I am interested in.
My code won't allow me to import the excel file into table 'TableForImport' unless they have the same column name! They never will! How do I accomplish my task without editing the excel file information? Here is my code:
Code:
CurrentDb.Execute "CREATE TABLE TableForImport " _
& "(PartNumber CHAR);"
DoCmd.TransferSpreadsheet acImport, acSpreadsheetTypeExcel12Xml, "TableForImport", Me.ExcelInput, True
I've adapted some code I found which works and allows me to import data from my access table "Device Text" to a specific range in an existing excel worksheet by copying a field "TextEdit" in the recordset. the code is placed in a module behind a command button on an excel worksheet. I have used import to excel because this seems to be less complicated for my needs than exporting from access.
Everything works fine if a single range is set , however I would like to set the range(rng) criteria in the code below to start at a certain cell depending on the value in another field in my access table called "LoopID" this is a number field which is not unique and can be 1,2,3 or 4. I know it wont be evaluated but I've entered the gist in red in my code.
I don't need to import it but I suspect I have to bring LoopID into the recordset somehow to use it,
Code:
'DIM STATEMENTS
Dim strMyPath As String, strDBName As String, strDB As String, strSQL As String
Dim i As Long, n As Long, lFieldCount As Long
Dim rng As Range
'instantiate an ADO object using Dim with the New keyword:
[Code] .....
I am new to MS Access and have been trying to use VBA to import a specific worksheet called "Access" in an Excel file (from about 400 users) into a single table. I want the code to search through one folder and import the "Access" worksheet in each Excel workbook within that folder. Each user has the same worksheet name. Here's my problem. I got this VBA code from: AccessMVP where KDSnell gave examples of how to import Excel worksheets into MS Access Tables.
Sub ImportExcel()
Dim strPathFile As String, strFile As String, strPath As String
Dim blnHasFieldNames As Boolean
Dim intWorksheets As Integer
' Replace 3 with the number of worksheets to be imported
' from each EXCEL file
[Code] ....
When I execute the code. Nothing happens. I go to the table and find nothing....or I get Runtime error 3011, where MS Access can not find the object "Access". Also, is it possible to update the table without duplicating records?
I'm using Excel 2010 and Access 2010.
I'm stuck on a step where I want to import an excel worksheet into the msaccess like we do normally. I do not have any data inside, it's just the header I will be importing. The data will be feeded by other forms based on some selections. My requirement is the "Default value" of each field should be set to 1 as we see in the property of a table in design mode.
The data would be updated later for some fields via macro or commands, but the fields were nor touched should be set to 1 (Value).
I am trying to import data from an Excel file to MS Access (2013).
The Excel sheet consists of 700 columns. A group of 7 columns (always same header) are to be implement in Access one among the other.
That means:
At first columns A-G, than columns H-N, than columns O-U
I am trying to solve this with a loop (as you can see in the code)
But, if I start the modul I get this error:
"Runtime error 1004. The method Worksheets for _Global object failed"
But the module works, of I start it a second time. The error message appears only at the first start.
Apart from that, the code works. Sometimes, the module imported empty rows into the Access table.
Code:
Sub ExcelImport()
Dim xlApp As Excel.Application
Set xlApp = New Excel.Application
xlApp.Workbooks.Open FileName:="C:Users...DesktopBeispiel.xlsx"
[Code] ......
I have been searching all over on how to create an import button on a form in access 2010 where I can set which table it should copy the data into but the user could locate the import file.
NOTE: the reason being I have locked all the ribbons...
If necessary I could make a specific import template file which would have all the headings locked...
- I have emails with excel attachments coming in multiple times a day to outlook.
- I want to click a button in Access and automatically import the last excel attachment in my email in box based on the timestamp of when it came in (thus getting the last one).