Modules & VBA :: Including Parameter Fields In Report Title?
Aug 28, 2013
I am running an Access 2003 report that outputs to an Excel Spreadsheet The parameter query has two paramerters First Date and Last Date. The report runs from an Button OnClick event. I need to include the two dates in the 'name' of the spreadsheet as below
Private Sub btn_report_between_dates_Click()
DoCmd.OutputTo acOutputQuery, "qry_all_calls_between_dates", acFormatXLS, "Calls By Between Dates " First Date" and " Last Date" - Date Report Run " & Format(Date, "dd-mm-yyyy") & ".xls", True
End Sub
(btw I know it is preferable to use the TransferSpreadsheet method, but I've not got around to that way yet)
View Replies
ADVERTISEMENT
Nov 21, 2011
I would like to display the value of my parameter query into the title of the report.How could I do this on Access 2007?So far I have made another field in the query and called it ParaDate: [JobDate]
Then in the report title I wrote:
=Limousines booked for&" "&[JobDate]
But it's not working.
View 1 Replies
View Related
Oct 15, 2013
I'm using VBA code to open a query, generate a report for a test and an answersheet. I'm using the same report, and don't want to make many reports. I have the below code which runs my query, and generates the reports.
Private Sub Command2_Click()
DoCmd.SetWarnings False
DoCmd.OpenQuery "1", acViewNormal, acEdit
DoCmd.OpenReport "WrittenExam", acViewPreview, "", "", acNormal
DoCmd.OpenReport "WrittenExamAnswerSheet", acViewPreview, "", "", acNormal
End Sub
I have a need to be able to set the report title for both reports when running my code.
View 3 Replies
View Related
Apr 18, 2013
I have a report that is based on a query.
The query has two fields. Start and End Dates.
When I run the query the Parameter box asks for the dates by using <[Date1] and >[Date2]
What I want is to have 2 fields at the top of the report, that display the values I enter in these boxes?
View 1 Replies
View Related
Dec 5, 2013
I am trying to add another parameter to a report to only get those specific records. I did not write the code and am very confused on how it works. Right now it is getting records in the Access database between the 2 dates entered. But NOW I need to add a parameter to select only records between those dates AND with the AccountNumber LIKE acctltr (this is the field from the form). They can either put in an "X" or an "P X". The AccountNumber needs to end in which ever one they enter.
Here is the code that is currently existing and supposedly works. At least it gets all the records between the dates even tho it still prints records with a ZERO balance.
Code:
Private Sub cmdprint_Click()
On Error GoTo exit_cmdprint
'mysql = "SELECT * from InvoiceTable " & _
' " WHERE ((not InvoiceTable.InvoicePrintDate1 Is Null) AND (not InvoiceTable.InvoicePrintDate2 Is Null) AND (InvoiceTable.InvoicePrintDate3 Is Null) AND (InvoiceTable.InvoiceDate Between #" & dtefrom & "# And #" & dteto & "#))"
'Me.RecordSource = mysql
[code]...
View 5 Replies
View Related
Aug 31, 2006
Hi there,
I am trying to save my form that i have created as a report by right clicking on the form and choosing save as report. However, my form includes a subform but the subform does not show up in the report. Any ideas as to why this and how it can be shown????
Thanks in advance
Lucy
View 2 Replies
View Related
Aug 5, 2013
I have one form which have two multiselect listboxes. They work, but every time when I choose id_organizacija from listbox popup enter parameter value comes up.
I am already tried to put id_organizacija in [ ] but that didnt solve problem.
Code:
Set ctl = Me.lstEmployees
For Each varItem In ctl.ItemsSelected
strWhere = strWhere & ctl.ItemData(varItem) & ","
Next varItem
Set ctl = Me.lstOrganizacija
[Code] ....
View 12 Replies
View Related
Sep 22, 2014
I'm trying to export a report based on a query which has a parameter.
this parameter has to come from the recordset.
now if i run the procedure it asks me for the parameter.
How do i get it to take the parameter from the recordset?
it should take the column 'Company#' from the recordset
here is what i have now:
Public Function mOutstandingInvoices2()
On Error GoTo mOutstandingInvoices2_Err
Dim rst As Recordset
DoCmd.SetWarnings False
'On Error GoTo BREAKOUT
[code]....
View 10 Replies
View Related
Nov 14, 2006
I need to import a .csv file into a table. The problem is the top title information is on the file, like below. I do not want to import report name, report date, include rows, number of rows, and the blank space. I need to start the import on the header row. This looks fine in excel of course, but when i need to import it into access, there is no need for it. How do i either strip that out during the import or skip it.
sample csv file:
----------------------------------------------------
Report name: xxxxxx
Report date: xxx
Include rows where.....
Number of row: xxxx
date,firstname,lastname,dollar,address,text
10/4,john,smith,888,12 w st,,
10/4,jane,smith,7575,34 w st,,
----------------------------------------------------
Any help would be great! Thanks!
View 2 Replies
View Related
Oct 15, 2013
I am using the built in Access macro editor to run a number of reports which are called for arguments sake ClientPartA, ClientPartB etc..My macro so far simply opens on a button click each of these reports and populates a number of text fields (all this is working fine)
Where my problem lies is I then want to export each of these reports to a central network location "L:Operations DatabaseProjects1042Outputfile. I have been using the command 'ExportWithFormatting' and have filled out the macro element with;
Object Type: Report
Object Name ClientPartA
Output Format: PDF Format (*.Pdf)
Output File: L:Operations DatabaseProjects1042Outputfile
Auto Start: No
Template File (no info)
Encoding (no info)
Output Quality Print
Now all my data is pulling from a form called 'Client' and the field 'RecipientsAccountNumber'..I thought I would be able to export the file(s) as PDF with the output file being written as;
Output File: L:Operations DatabaseProjects1042Outputfile Forms![Client]![RecipientsAccountNumber] & " - ClientPartA"
saving the form to the named directory as '300300300 - ClientPartA'..What in reality is happening is it's saving the file to the named directory not as a PDF and with the file name of 'Forms![Client]![RecipientsAccountNumber]
View 7 Replies
View Related
Mar 8, 2013
I have a form with command button, when clicked it displays My report in Preview. I want to change the report title whenever i click a button from the form. I believe it is to do with VBA and am new in that.
View 8 Replies
View Related
Oct 21, 2014
I need to know if exist the system in Access 2007 to output a report in word document including images. Normally the output is "*.rtf", with a quite good quality but due to the file type it doesn't include the pictures.
View 1 Replies
View Related
Aug 4, 2006
Hi,
First post in this forum. I am using office 2003 pro. I have an Access database that I would like to change the title of. I would ilke this change to be applied to forms, reports and tables. I have done this in the past but can't recall how to do it.
I would be grateful for any assistance.
Martin
View 6 Replies
View Related
Nov 25, 2014
I have a database of film events, for which i have to do posters.
With the click of a button on a form, access opens word and puts all the fields in, including a field called [photo], which is the name of the image stored outside of the database.
Is there a way of getting that image into the word Document with all the other fields? Or have I just wasted an afternoon....
View 2 Replies
View Related
Jul 27, 2015
I can change the application title using the following only if the Application Title is blank. If it is not blank then it does not change.
Code:
Dim db As Database
Set db = CurrentDb()
Dim newtitle
newtitle = "qwerty"
Set newtitle = db.CreateProperty("AppTitle", dbText, strNewTitle)
db.Properties.Append newtitle
Application.RefreshTitleBar
View 2 Replies
View Related
Sep 4, 2014
I have a Form with multiple comboboxes and listboxes whose selections are assembled into a query. The combo-box selection goes into an IF-ELSE statement for a selection check (IsNull) and if there is no selection made, it is supposed give me all values (Blanks & Non Blanks)
Here is a sample of my code:
Code:
If IsNull(Me.cbReg.Value) Then
RegStrng = " Like '*'"
Else
RegStrng = Me.cbReg.Value
RegStrng = "= " & RegStrng
End If
I have several If-Else statements here and a final query assembly at the bottom of the code page which is as follows
Code:
MasterSql = "SELECT DISTINCT blah-blah-blah" & _
" INTO some more blah-blah" & _
" FROM even more blah-blah-blah" & _
" WHERE dbo_mytable.[Reg#]" & RegStrng & _
" AND the results from other If-Else statements similar to above"
Here is where the problem comes in:
I see the mistake in my If-Else statement
Code:
If IsNull(Me.cbReg.Value) Then
RegStrng = " Like '*'"
Like * means it will show me all rows where there are NON-Blanks. However, it skips all Blank Data.
What should the If IsNull() statement look like if I want to show all the values?
If there was only one combo-box and there was no selection made, then the resultant query should show me all results rather than only the results where there is some sort of data within the column filtered by the combobox.
View 2 Replies
View Related
Jul 3, 2013
I have a routine that outputs an MS Access report as a pdf file which works OK. It does not open the file which is what I want.
DoCmd.OutputTo acReport, "rptTransactionInvoiceExcVAT", acFormatPDF, "C:UsersJEFF1Documents
ptTransactionInvoiceExc VAT.pdf", False
What I would like to do is output the pdf file with a Customer name and number from the field Me.txtAmazonBuyer. I have tried:
DoCmd.OutputTo acReport, "rptTransactionInvoiceExcVAT", acFormatPDF, "C:UsersJEFF1Documents" + ([Me.txtAmazonBuyer]) + ".pdf", False
But no joy.
View 7 Replies
View Related
Jun 2, 2015
I want to create a Macro saves the report in a specific location, and uses two fields within the report to generate the name of the file. For example, "[Sales Rep Name] + [PayPeriod].pdf" and it should be saved in a predetermined folder.
View 1 Replies
View Related
Jun 16, 2006
Access 2000
Hi All.
I am running a select query on a date field.
I populate the table "date" field from a Microsoft Date and Time Picker Control 6.0(SP6).
I havent been able to figure out how to ONLY populate the date portion of the control so my field value containes Date & Time.
When I run the query, I have to select the day after my request to include the records I need. I think this is because of the time in the field
Example, If I want all records thru 6/17/2006 I must select "thru" 6/18/2006. This mucks things up if I have records dated 6/18/2006
Both of these statements give the same bad results:
Between [forms]![freports]![from] And [forms]![freports]![thru]
>=[forms]![freports]![from] And <=[forms]![freports]![thru]
Any ideas?
TIA
Detrie
View 1 Replies
View Related
Aug 4, 2006
Hello ... by problem:
Explanation:
Table has a single field (AllocAmt) that is repeated for each detail transaction. Therefore I can't put the sum of the single field on the report because it adds that sum times the count of the detail.
The solution I attempted was to create a subreport using a summarized query then divided the summarized AllocAmt by the count of the same field and got what I wanted. It worked beautifully. I named the calculated field and then created a sum of the new field (SumAllocAmt) in the subreport report footer. I ran the subreport and my totals came out fine.
Then I added the subreport to the original report and the information for each grouping came out fine.
Now my problem ... when I call the field ('=srptAllocAmt.Report!TotalSumAllocAmt") I created in the subreport report footer it does not give me the total for all groups in the original report. In fact it gives me the last record amount instead of a total. When I enter the expression "=Sum([sprtAllocAmt].[Report]![TotalSumAllocAmt])" and try to run the report a box pops up requesting a "Parameter Value" for the field sprtAllocAmt.Report!TotalSumAllocAmt. Why doesn't it recognize that I want a sum of the field contained in the subreport? I've gone to the properties box in all the subreport fields and made the data available "overall". I don't know what else to try. Any suggestions?
View 2 Replies
View Related
Aug 16, 2007
Is there a way I can display my parameter in my report? I have a report that's generated from a parameter query. In a control I want to show what the parameter values are: Between [start date] and [end date]
View 2 Replies
View Related
Mar 29, 2007
Is there any way to avoid the error code when using the date parameters in Report header when there is no data for the specified range.
The following are the parameters being used to get the date range. They work fine as long as there are records in the date range entered.
=Reports![Toys and Adapted Equipment Centre Signed Out By Date Range]![Enter Start Date]
=[Reports]![Toys and Adapted Equipment Centre Signed Out By Date Range]![Enter Final Date]
View 2 Replies
View Related
Jun 5, 2013
I have a report based on a query with a between two dates parameter (Begin date and end date). This parameter is fed from a form. All works well - query, form and report. My question is can the date parameter appear on the report header so users know the report was based on a start date of 1/1/2008 and an end date of 1//2009 for example?
View 4 Replies
View Related
Jan 12, 2008
Hi, I need help in creating a parameterized query.
I need to show only certain fields depending on the value of the parameters.
For example, I have a table with fields: ID, Name, Phone Number, Address, DOB.
The parameter can only be value of A, B or C.
If the user input A as the parameter in the query, only field ID, and Name will be shown
If the user input B as the parameter in the query, field ID, Name and Phone Number will be shown.
etc.
Is there any way to do this, rather than to separate the query into 3 queries for each of the parameters? Thank you.
View 1 Replies
View Related
May 20, 2013
Is there a way to have one parameter in a query effect multiple fields?I have a table that details service calls on our equipment. There are columns in that table for each part of the equipment that get marked, depending on what needed serviced (i.e. software, printer, keypad, monitor, etc). I would like to be able to run a query that will show all the service calls where one part of the equipment was serviced multiple times without have to enter multiple parameters or write a union query (there would need to be 11 unions or 11 parameters for each part to be captured). For example, I would want to know how many pieces of equipment had 3 or more service calls on their software. I want to run the query without having to say that I don't care how many service calls were performed on the printer, monitor, or keypad. I would like to be able to say "Software >3" and have the query run on that information.
View 1 Replies
View Related
Jul 8, 2015
I have used the Data tab on a property sheet for a field in a report to build this expression (using expression builder) as the control source "=IIf([AllSchoolContacts].[Email]>" ",[AllSchoolContacts]![Email],[EmailAddress])" When I view the report I get the Enter Parameter Value dialog labelled AllSchoolContacts
I have added the fields to the expression using the expression builder the sources for the report are a table and a query in the REPORT.
The tables are AllSchoolContacts and Non Metro Query.
What I am trying to do is to have the record line show the email address for the organisation if the email address field in the AllSchoolContacts is blank.
View 1 Replies
View Related
