I have succeeded with retrieving subTable data from a One to many relationship, however, I'm stuck in an infinite loop processing the first record of the subtable and not moving to the next one.
Dim db As DAO.Database
Dim rstLandData As DAO.Recordset
Set db = CurrentDb
Set rstLandData = db.OpenRecordset("qryLandData", dbOpenDynaset)
Dim strLandType As String
[Code] ....
Is it possible to run a loop through each record in query, but refresh the query in between loops?
The query I am looping needs to be updated before moving to the next record.
t can't figure out how to get the query to refresh before looping.
I am attempting to use 2 fields from a query to supply the Top and Left Properties of a Collection of Rectangle Controls on my form. The purpose of this is to display the locations on a map of "Spots" in a haunted house. The query that I am using shows the spots that have been pre-tagged with the location of where they belong on the map (currently the query has only 24 tagged spots). On the actual form I have rectangle controls (control type acRectangle) with their visible property set to False by default, named box1 through box25 (there will be more eventually, as I am just working with this test group).
I started with the following code, yet it stops after (correctly) placing the first spot on the map (please see the attached jpg):
Code:
Private Sub Form_Open(Cancel As Integer)
Dim ctl As Control
Dim db As DAO.Database
Dim rst As DAO.Recordset
[Code]....
I'm sure I need to have 'Loop' in there somewhere, but I am not sure exactly where to place it, or if another line is also needed.
If there a way i can remove duplicates from an email list? I pull these emails from a recordset. But i email may appear more than once and it doesn't look good e.g
johndoe@mail.com;johndoe@mail.com;jo...hndoe@mail.com.
I'd like to remove the duplicated email, if its possible. Code below.
Code:
Set rs = CurrentDb.OpenRecordset("select * from query")
With objMailItem
If rs.RecordCount > 0 Then
rs.MoveFirst
Do
If Not IsNull(rs![email]) Then
vRecipientList = vRecipientList & rs![email] & ";"
rs.MoveNext
Else
rs.MoveNext
End If
Loop Until rs.EOF
.To = vRecipientList
I found this code and have substituted parameters to suit my own needs however the loop is not working. Only the first record in my recordset (which is a test recordset of only 3 records) is being updated.
Also, for testing only, the edit or update being applied is trivial: Description = "WHITE RESIN". If i can get the loop to work I want to substitute higher functionality to the module.
Private Sub Update_Click()
Dim dbs As DAO.Database
Dim rsQuery As DAO.Recordset
Set dbs = CurrentDb
Set rsQuery = dbs.OpenRecordset("qryRmResin", dbOpenDynaset)
[Code] .....
I have a table with a multi-select listbox as one of the fields. I want to loop through the recordset (table) and changes the listbox selections for each record.
To go into a little more detail, the table (tblEmail) has a field (Label) that is a multi-select listbox. The listbox pulls from another table (tblLabel). I want to loop through records in tblEmail and edit/change the Label(s) for each email though VBA.
I've tried doing something like this:
Code:
With rst
.MoveFirst
Do Until rst.EOF
.Edit
!Label.Selected(0) = True
.Update
Loop
End With
However I get an error that says "Run-Time Error '438' Object doesn't support this property or method" ...
I have a part table summary with various quantities 1-1000 and want to create a new table where part number repeats with quantity of 1 corresponding back to the sum. If part 123456=20 then this would repeat 20 x and each record Qty=1
Start with summary
--================
Part Qty
111000 2
222000 3
End result all Qty=1
--================
Part Qty
111000 1
111000 1
222000 1
222000 1
222000 1
--================
I stared with a loop and was able to get an append query to work referring to the quantity value (3) for one record from tbl_temp to tbl_main, but not really sure how to advance through many records.
For n = 1 To [Forms]![MainScreen]![Text7]
DoCmd.OpenQuery "qry_Update_Qty"
'DoCmd.GoToRecord , , acNewRec
Next n
maybe a do while or some other approach?
I would like to do a loop but never done one before, basically i want to copy the current record by the number of times specified in a quantity field
So if the quantity field in the record says 5 then copy that record 5 times (I have managed to create the copy and paste code but dont know how to make it do it 5 times
Code:
DoCmd.RunCommand acCmdSelectRecord
DoCmd.RunCommand acCmdCopy
DoCmd.GoToRecord , , acNewRec
DoCmd.RunCommand acCmdPaste
I have a table that has a min & max number however, some entries do not have a maximum its unlimited. is there any solution to show this other than having 9999999999999999999999999999999.
View 3 Replies View RelatedI have a following problem: I have a form in continuous mode. Users are supposed to filter data in it to their liking using inbuild filters in Access. After that there is a button that should calculate total weights in filtered records (at this point, I add more calculations once I have solved this issue). Code of button is as follows:
Code:
Private Sub btnCalculateWeight_Click()
Dim rst As Recordset
Dim weight As Long
Dim material As Long
Dim subtype As Long
Dim locus As Long
[Code] ....
Loop goes through recordset correct amount of times but for unknown reason takes value only from the first record and sums it N times where N is number of records in recordset. Recordset seems to be correctly assigned according to messageboxes I added to pinpoint problem. PotteryWeights is a custom function I made and it works properly.
I have to loop thru 2 recordsets.I need to first determine the quarter , then retrieve a value from each of the 6 fields for that quarter and compare that value against a previous years value that is also stored in the table for each quarter.the following is the field names not the field value.
Tier 1 2 3 4 5 6 PrYr
Qtr1 Q1T1, Q1T2, Q1T3,Q1T4, Q1T5, Q1T6 .385
Qtr2 Q2T1, Q2T2, Q2T3.Q2T4, Q2T5, Q2T6 1.25
Qtr3 Q3T1, Q3T2, Q3T3,Q3T4, Q3T5, Q3T6 .774
Qtr4 Q4T1, Q4T2, Q4T3,Q4T4, Q4T5, Q4T6 .333
if Qtr1 = Q1T1 = 0.44 Q1T2 = .50, Q1T3 = 1.45, Q1T4 = 3.00, Q1T5 = .25, Q1T6 = 6.0
So I need to be able to set the value of PrYR = .385 and compare against the value of the 1st qtr for each tier for Qtr1.Then go to Qtr2 and repeat the process but grap the Q2 PRYR value = 1.25 and compare against all Tiers for Qtr2.As so forth for each quarter.then I need to compare the value of the PrYr and if it is the following then
If PctYrlyIncrease< Tier1 Pct (Q1T1) Payout = 0
elseIf PctYrlyIncrease> Tier1 Pct (Q1T1) and < Q1T2 then
Sum(TotalNetUSExp * T1E)
ElseIf PctYrlyIncrease> Tier2 Pct (Q1T2) and < Q1T3 then
Sum( TotalNetUSExp * T2E)
and repeat for each Tier per Each Qtr.Here is my code so far:
Code:
Public Function BkOvrCalc(ByVal gContractID As String) As Long
Dim curDB As DAO.Database
Dim strSQL As String, strSQL1 As String
[code]...
Here is the code:
Private Sub Form_Load()
Dim rs As Recordset
Set rs = CurrentDb.OpenRecordset("select * from tblpatient, dbOpenDynaset)
If Not (rs.BOF And rs.EOF) Then
rs.MoveFirst
Do While Not rs.EOF
' do stuff
rs.MoveNext
Loop
rs.Close
Set rs = Nothing
End If
End Sub
I have watched it step through on debug and it does everything right for the first record, but it seems to come back to the same record.
I have a form where a textbox has shows the NameNo from the NameNo column in a db. At the moment I am using a dlookup to set the textbox = to the NameNo, but obviously this is only returning the 1st value in the column. How to get this form to automatically display each NameNo, creating a pdf of the form and then moving on tto the next nameno. I have the code to make the pdf working so far, all I need now is to figure out how to use the textbox to loop through all the NameNo's in the table.
View 3 Replies View Relatedi have the following code to get file list from specified directory:
Code:
Dim db As DAO.Database
Dim TB1 As DAO.Recordset
Dim p As String, x As Variant
[Code].....
the field "File_Name " is not set to accept duplicate the above code work fine , but when it find the file name exist on the TB1 it return an error i need the code if find any error continue to retrive other files on the folder not exit loop and also i don't want to make check if file exist it will lower the speed of code
Is there a way of looping through a non update able continuous subform, and using information from each line.
Which creates a new record in another table? so if there are 3 records in the subform it creates 3 new records in the other table and so on?
why my access always go over the loop that I am declaring..Here is a sample of my code:
Code:
Dim rs As New ADODB.Recordset
rs.ActiveConnection = conn
rs.Open mySQL, conn, adOpenDynamic, adLockOptimistic
For lngProd = 1 To 5
[code]...
I get the error of access cannot find the tbl_data6. Where in the declaration I wrote 6??
I believe this is most recurring scenario for all. Any simple way like:
Code:
For each file in folder.files
Msgbox File.Name
Next File
For your information the above code doesn't work
Basically what I am trying to accomplish is uploading multiples file automatically into server. The code I am trying to use works great if the user wants to upload a single file manually because the code prompts you to choose the file and I am wondering if there is a way to tweak the code. here is the code I am using
Code:
Private Sub Form_Load()
Dim objFTP As FTP
Dim strfile As String
[Code].....
this is a progress bar, what i need is, while execute loop (progress bar) but also execute next command = "LedgerExe:
On Error GoTo Proc_Err
Dim inti As Integer
Dim dblPct As Double
[Code]....
I work for an insurance company where various (and multiple) discounts or loads can be applied to a quoted premium for one reason or another.
These discounts/loads are stored in a table with a corresponding customer ID, where each row represents an individual discount/load (labelled and ordered-by a 'Step').
Unfortunately, the resulting premium from these discounts/loads is not stored in the database and are calculated on the fly by the front-end.
I have a requirement however, to store the 'new' premiums based on the stored discounts/loads for a report.
My problem is that the calculations must occur incrementally one after another, where the discount/load at each 'Step' applies to the resulting premium from the previous calculation.
The attached spreadsheet is demonstrative of the existing table where two additional columns have been added to show you what I need to calculate. 'Price_Amount' represents the discount/load in monetry terms relative to the calculation and 'New_Prem' is the premium resulting from the calculation step.
Notice that each discount/load applies to the previously calculated premium rather than the original one (Original_Prem = the starting point from which all further calculations should apply).
The full table would include many more rows for different customer ID's, where the number of 'steps' could be as few as 1 or as many as 7 per customer ID (ordered by 'Step').
Having toiled for many hours in Access to achieve the above, I am now resigned to the fact that only some kind of VBA function will achieve my requirements.
This function should take the Original Premium for each CustomerID and loop through each 'Step' applying the relative discount/load based on the value in 'Pricing' and the number type in 'Price_Type'. Once the function has calculated each step per CustomerID and has reached the maximum 'Step', it should move on to the next CustomerID.
such can only articulate the requirements without being able to convert this into actual coded logic. Nonetheless, I am in a bit of a pickle with this one and am under some pressure to create the report.
I am using to select and append data to an output table. Everything is working fine until the last step. The last step appends all the data to an output table from the initial table. The intermediate steps select the data to output.
"AddExpenseToOutput()" is stopping about halfway through the list of criteria. Initially I thought there might be a null in the list, but it doesn't look like there is after dropping everything into Excel to manipulate.
Code:
Option Explicit
Dim rstAccount As DAO.Recordset
Dim rstAccounts As DAO.Recordset
Dim CAccounts As String
Dim Item As String
Dim AccountKey As String
[Code] ....
I have a sample database (attached) where I have a form called frmVoteHeadsOne. The voteheads that I have are swimming (Swim) and transport (Trans), which both appear for data in a table. On the form, from the combo list, I would wish that if I select swimming, for example, only Mark Tyler's name is returned since he has paid 2000; if I select Transport from the same list, only John clement's name is returned.
My purpose for doing this is because in the actual database, I have 21 different voteheads which I would like to get different results from based on what the user selects from the combo list.
I've got a problem with a loop for producing worksheets (reports). When everything works there's no problem but when one of the reports namely rptChemoOralWorksheet doesn't have data available to produce the report the loop finishes and then all remaining worksheets don't print.I've put in a standard error handler with MsgBox, but it's never triggered. I've also tried
Code:
On Error Resume Next
but again rather than skip the DoCmd.OpenReport "rptChemoOralWorksheet" (when the error is present) and move to the next one to continue printing through the list the loop stops and the subsequent code starts to run.
Code:
Dim mydatabase As DAO.Database
Dim rst As DAO.Recordset
Set mydatabase = CurrentDb
Set rst = mydatabase.OpenRecordset("atblChemoWSLoop", dbOpenDynaset)
Dim rsBN As String
Dim rsDose As Double
[code]....
Im trying to create a record set that compares a quantity value in the recordset to a Value in a temporary table that holds the most recent remaining quantity. I have the following code in the after update of a text box, but it does not trigger. I want it to run after a value is entered into the text box. Is the code wrong or the location im putting it incorrect?
Code:
Private Sub txtQty_AfterUpdate()
Dim rs As DAO.Recordset
DoCmd.OpenQuery "qryQuantitySoFar"
Set rs = Forms!frmReceive!sfrmReceiveDetailEntry.Form.RecordsetClone
[Code] ....
I am relatively new to VBA and have this loop (see below) was wondering if it was possible to build it into a variable, so I could call upon it within an IF statement.
Set ctl = Me.listSeeAllAssets
For Each varItem In ctl.ItemsSelected
rs1.AddNew
rs1!AssetNo = ctl.ItemData(varItem)
rs1!DateOfService = Me.DateOfService
[Code] .....
creating a small loop to run code.For each record from AREA with PLANTPROGRAMID = VARIABLE Then...In this example, my table is called Area, my field is called plantprogramid, and my variable is defined earlier in code.
View 5 Replies View Related