I am using an input box to find a Street name in a record using the following:
Dim rs As Object
Dim strCriteria As String
DoCmd.OpenForm "frmStreets"
strCriteria = InputBox("Please enter Street Name")
DoCmd.OpenForm "frmStreets"
[Code] .....
I know that if the search criteria is a number, then the .findfirst will work OK, as I am also using that, but I am not seeing where the " or ' or * should go so the correc
I want a user to enter a number into an input box and then based on the number in this box a form will be opened with records associated only with that employee number. (All employee numbers are stored as text)The code below opens the form, but it is blank.
Private Sub cmdOpenAddKeys_Click() Dim EmployeeNumber As String EmployeeNumber = InputBox("Please Enter Employee Number:") DoCmd.OpenForm "frmAddKeys", acNormal, , "[Forms]![frmAddKeys]![empno]=" & EmployeeNumber End Sub
Instead of using an update query, so my Audit Trail will continue to update correctly, I'd like to use an input box and run a function that performs much like an update query.
My problem is, only one out of 4 records updates correctly.
I have a form that has a subform on it. The main form shows a category of furniture and has custom navigation buttons and a search text box for asset numbers and command button that runs the search. The subform shows the asset numbers associated with that furniture category, sometimes there is only one asset number, in other cases there could be 60. There is a scroll bar to scroll through the asset numbers when there are too many to see in the initial window.
The buttons all work as they should except when I search for an asset number that is part of a category that has too many asset numbers to show in the main window. When this happens the "previous" and "next" navigation buttons do not take you to the previous or next record. All of the other buttons on the form work though - you can go to the first, or the last record, and you can search for a new asset.This is the code for the search:
Code:
Private Sub cmdAssetSearch_Click() Dim rs As Object If IsNull(Me.TextAsset) Or Me.TextAsset = "" Then MsgBox "Please type in an asset number to search for.", vbOKOnly Me.TextAsset.SetFocus
[code]....
I've also attached a picture of what I mean when I say there are more asset numbers than what the window shows.
Well I got a little problem and well... is simply but just I didnt know How.
When I pop op a inputbox and then i enter value I want this value got parse under a field
The code is the follow:
Private Sub SetPSW_Click() Dim Boite As String Dim PSWNew As String
PSWNew = PSW.Value ' The current password is sotre under this field PSW Boite = InputBox("Entrez le nouveau mot de passe", "Nouveau Mot De Passe") PSWNew = Boite ' Here I want then the value of Boite is putting on PSWNew End Sub
Thx for help cuz i can't figure out how to do with a inputbox
Hi all, I have an Input box that appears on certain criteria, using the folllowing code Code:inputbox: myqty = inputbox("Please Enter Quantity!")If Nz(myqty, "") = "" ThenMsgBox "You must insert a value" GoTo inputboxElse![Issued] = myqty End If
Does anyone know how i can set the size of the Inputbox as at present it appears to big for what i want.
Okay, I've been working on this database for weeks now, I'm almost done, there is a light at the end of the tunnel and my boss is anxious to implement the db as I'm only here for 3 more weeks and it MUST be completed, tested, error checked before I leave. So I'm running out of time FAST!
Okay, the problem is simple. I'm using a Data Access Page in Access to build a nice little front-end for my database for my co-workers to use. On this DAP (Data access page) I have an Input box that allows the users to browse their directory and select a file. I need to take the path/file name that pops up in the input box and just save it to the table. I can take care of all the other elements.
So, through DAP, how do I save the value in the inputbox into my table. Please, any help would be great! :eek:
I have an input box in which the user types in a password to enable the shift bypass, when the user types in the password it show it letter for letter, is there a way to mask the input so that it shows the characters as the traditional *
[CODE]strMsg = "Do you want to enable the Bypass Key?" & vbCrLf & vbLf & _ "Please key the programmer's password to enable the Bypass Key." strInput = InputBox(Prompt:=strMsg, title:="Disable Bypass Key Password")CODE]
I have created the following function in my datebase so that i could specify the date a query works from.
Option Compare Database
Function GetParmValue() As Date
GetParmValue = InputBox("Please enter the date you wish to update!?")
End Function
I have a button on a form that runs the query in question, there is also an identical query that needs to be ran using the same result from the input box but rather than it display the input box twice i wondered if there was a way i could use the result from one of the boxes with both queries!?
Here is the code for the button;
Private Sub bImport5_Click()
DoCmd.SetWarnings False DoCmd.OpenQuery "Update" DoCmd.OpenQuery "UpdateFuture" DoCmd.OpenQuery "MoveFuture" DoCmd.SetWarnings True MsgBox "Files have now been updated to the specified date and moved to the Future Dated table!", vbOKOnly, "Update Complete"
I am trying to get a record from tbl_new_accounts to tbl_closed_accounts, based on the number entered in a input box.
Code: Dim StoreNumber As String StoreNumber = InputBox("Please Enter The Store Number", "") CurrentDb.Execute ("INSERT INTO Tbl_Closed_Accounts SELECT Tbl_New_Accounts.* From Tbl_New_Accounts WHERE (((Tbl_New_Accounts.Fld_Store_Number)=" & StoreNumber & "));")
Using vba code I want to populate the search box found in the navigation bar. I don't want to filter the form as it's important the user can scroll up and down to see other records in the continuous form. At the moment the user has to manually enter search to find the record.
I managed to create a form that is able to search keywords on Access 2007. However, the keyword search must be exact to what is contained in the table.
For example, I stored "red blue yellow" into the database, and I can only search "red blue yellow", "red blue" or "blue yellow" in order to call that data.
How do I make it such that I am able to search "blue red yellow", "yellow blue red" or "red yellow blue"?
These are my current codes:
Code: Private Sub txtSearch_AfterUpdate() Dim strWhere As String Dim strWord As String Dim varKeywords As Variant Dim i As Integer Dim IngLen As Long
creating a query using vba. I have a form with FROM and TO textboxes(Formatted as Short Date)....What I'm hoping is:
1. When I put a date in FROM textbox...the query should show records from the date selected onward. 2. When I put a date in TO textbox...the query should show records from the date selected backwards. 3. When I put a date in FROM textbox and TO textbox the query should show data between this two dates?
In my developing application I am making use of searchboxes to narrow down the amount of records. On a form I have a textbox and a subform with a table connected. In the textbox I can type a character that will be used in an 'Instr' SQL query. I am using the code to query one field. (see code below) In what direction do I have to look to make this code usefull to search through two fields. In my case that will be Tag and Function.
Code:
Private Sub mnu3_txt_UnitbookSearch_Change() Dim SQLstring As String SQLstring = "Instr(Tag, " & "'" & Me.mnu3_txt_UnitbookSearch.Text & "'" & ")" ReReadDescriptions SQLstring
what I would like to do if possible is for this to look at the first line in the table but I want to use this part of the code for 4 or 5 different paths Is it possible to modify the code so when I use it 5 times each code looks at different lines in the table
I need to find out where the field called "R_SHIFT" is being referenced in all our MS Access queries. I just need the query name so I can go into the query and change the name from "R_SHIFT" to "SHIFT"
I was thinking there was a function for Modules to Find Field? I have never done any Modules before..
I have a main form "Furniture_CatCodeAssets" which shows detail specifics about certain furniture item codes (width, height, colour etc.). I have a subform "Furniture_AssetsSubform" which shows all of the asset numbers associated with that furniture item code.I have a combo box that allows you to filter by furniture category, that then updates a list box that shows only the item codes associated with that category. When an item code is selected in the list box the main form and the subform update to show what was selected. (I mention this only in case it is causing an interruption - they work perfectly.)
What I am trying to do now is add a text box and button that will allow you to search in the subform to find a specific asset number and go to that item code on the main form.
I have the following code on the command button: Set rst = Forms!furniture_CatCodeAsset.Furniture_AssetsSubfo rm.Form.RecordsetClone rst.FindFirst "[Asset Number]=" & Me.textSearch If Not rst.NoMatch Then Forms!furniture_CatCodeAsset!Furniture_AssetsSubfo rm.Form.Bookmark = rst.Bookmark Else MsgBox "No match found, please check your asset number and try again." End If Me.textSearch = Null rst.Close Set rst = Nothing
Which returns the message box that nothing was found even though I know I that asset number exists.
I am using the following code to filter my form with a search box:
Code: Me.RecordSource = "qryCompanies" Me.Filter = "CompanyName Like '*" & Me.SearchTxt & "*' Or webpage Like '*" & Me.SearchTxt & "*' Or PriorName Like '*" & Me.SearchTxt & "*'" Me.FilterOn = True
[Code] ....
It works great with one minor issue: if I try to search for a name containing an apostrophe, I get a syntax error. So, it won't find Children's Hospital for example.
i have got the bellow code that filters a listbox which is based on a query, from a textbox. The code works fine and it Filters, but if i put in too many characters that do not exsit in the data( so it cant display any results) i get an error saying Run time error 2105 - You cant go to the Specified record? how i can catch this error so it does nothing apart from display a blank listbox with no error?
code:
Private Sub txtSearch_Change() Me.lstShowSupplier.Requery DoCmd.Requery Me.txtSearch.SetFocus If Not IsNull(Len(Me.txtSearch)) Then Me.txtSearch.SelStart = Len(Me.txtSearch) End If End Sub
I have recently built a database to keep track of all the inventory counts for our technicians. This process was originally in Excel and they wanted to move it to Access in order to automate it. They have also decided that they still want to maintain the original Excel schedule by adding dates each time a step is completed. I currently have code that will go to an existing spreadsheet and add data from the database URL... I was wondering if there is a way to modify this code so that it will look for a specific name in the spreadsheet, go to the end of that row and enter today's date.If so, what modifications would need to be made to the code to get it to work?
Ok I'm building a Text Search box that "Live Filters" the results in a ListBox control on the same form.
After typing in a value (Say, for Customer First Name like "Steven") I want the code to do the following:
1. If there is no value in the listbox that matches when the user presses the enter key....open the New Customer form - THIS WORKS
2. If there is a single value in the list, then open this record in the customer form when the user presses the Enter key Receiving a Syntax Missing Operator error on this line:
However, I use this exact code on a button elsewhere in my project (NOT within an IF Function) and it works perfectly fine!
Code: Private Sub txtSearch_KeyDown(KeyCode As Integer, Shift As Integer) If KeyCode = vbKeyReturn Then If Me.ListCustomers.ListCount = 0 Then CmdNewCustomer_Click
I have a simple bit of code that searches for a [User Name] field the basic idea is I place a field called "search" on a form and set its on change to
Private Sub Search_Change() Search.SetFocus strtarget = Search.Text If strtarget < "a" Then strtarget = "a" [User Name].SetFocus DoCmd.FindRecord strtarget, acStart, False, acSearchAll, False, acCurrent, True Search.SetFocus Search.SelStart = 100 End Sub
it takes the text entered in the search field and calls it Strtarget then resets focus on the field I want eg [user name] once the search has done it resets the focus on the search field so you can carry on typing this works very well unless the search string starts with a letter I.