I am looping through a Lotus Notes view through mails which comes with standardized content from our homepage.Some of them have one or more attachments, some mails do not have attachments. I loop through the view, read the content, write the content in a table, extract all the attachments (if there are some) and remove the mail from view this into another view.
The loops runs through without error, but is skips the mails without attachments, so that after the "first loop" all mails without attachments remain in the view, whereas all with attachments have been processed accordingly.With another start of the function all the mails WITHOUT attachments are processed accordingly as well.This is not logic for me, as all code I found on the web looks like this:
Do While Not LNDoc Is Nothing
Set NxtDoc = LNView.GetNextDocument(LNDoc)
'check if Attachments are in the mail !!!!!!
If LNDoc.HasEmbedded Then <----
the user opens a certain mail and THIS mail should be either saved as PDF (for example by CutePDF - as it works with a word-doc) to disk or be imported to my Access datebase in a certain field (the Body of the mail).
But I could not find code to catch just the OPENED Mail, there are a lot of examples how to loop through a Folder or a view reading all mails in it, but no one for just the ONE.
There should be something like "uidoc", but I cannot manage it.
So in real, my problem will be to "detect" the opened (or at least the marked) mail in the Notes GUI. In Outlook I do this with ActiveInspector.CurrentItem, but in Notes?
I'm trying to create a lotus notes email through vba that contains data from one of my access tables. Since I'd like the data to be displayed in a tabular fashion, I'm trying to format the body of the email in html.
I have a function which generates a report as a RTF file, then sends it out to a list of users via Lotus Notes. The list of users is generated within the function using a query. The code worked fine while I was testing with just me in the recipients... but as soon as I add more people to the list, I get Runtime error 7294: Unable to send mail, no match found in name and address book(s) If I copy and paste the generated list into a new mail message in Lotus Notes, it accepts them all....
I THINK this is because when it's sending from Access, it's trying to use my personal address book, rather than the one that's held on the mail server... Does that sound plausible / feasible? If it does, how to change this?
I tried changing the recipients list to have the 'actual' email addresses in it rather than their names - when I did that I got no errors... but it didn't send the email, either!
I receive mails through LN and loop through a certain folder, reading DeliveredDate, Body, Subject and writing those items into an Access-table.This works fine, before I go for the loop I put the doc in another folder and remove the current doc from the folder.
Call LNDoc.PutInFolder("SMSBackup", False) Call LNDoc.RemoveFromFolder("SMSResponse") Set LNDoc = LNView.GetNextDocument(LNDoc) Loop
Without any error, without anything abnormal in the mails the code exits after a few loops, sometime after more or sometime after less read mails.The problem ist the RemoveFromFolder, not the PutInFolder function.
So to avoid this behavoir, I changed my code to finish the loop without Call LNDoc.PutInFolder("SMSBackup", False) Call LNDoc.RemoveFromFolder("SMSResponse")
and added after the loop a NotesCollection which should do ALL at once.But this part of the code does nothing at all (allthough found on the web).
With LNCollection .PutAllInFolder "SMSBackup", False .RemoveAllFromFolder "SMSResponse" End With
The complete code looks like this:
Set objNotes = GetObject("", "Notes.NotesSession") Set LNdb = objNotes.GetDatabase("myServer", "MyNSF") If Not LNdb.IsOpen Then LNdb.OpenDatabase If Not (LNdb Is Nothing) Then Set LNView = LNdb.GetView("SMSResponse")
I have been sending plain text emails for a while, but now I have a project where the formatting of the text needs to be specific and I need to send as rich text.
I can use the rich text from a table, excel, or word, but I am at a loss on how to get the data to Lotus Notes.
I've got a form which emails out a report when a new record is added to my database but I'm stuck when it comes to making it send it to more than one recipient.
I came across this on the web... which suggests I should be using an array but I don't know anything about arrays.
For multiple email addresses you just set MailDoc.sendto to an array of variants each of which will receive the message. So
Code:
Dim recip(25) as variant recip(0) = "emailaddress1" recip(1) = "emailaddress2" e.t.c
maildoc.sendto = recip
My problem is I'm not sure how to implement it? My 'recipients' are being pulled from a query... how do I get that into the array of variants?
I have a VBA code to import mail from Lotus Notes into Access. The database user is able to read his email inside Access, similar to any email program.
Unfortunately, when I use the GetItemValue (lotusscript) method to read the body of the email message, Notes will render the Rich Text information as Plain Text, and I end up with no formatting information (bold letters, underline, text color, etc.)
How to import messages from Notes to Access and keep the text formatting? I am storing the data in a Rich Text Memo field in a table. I have found code to write HTML (MIME) messages, but not to import them into Access.
I've worked with Access before but I've never had to setup mass mailing using Lotus Notes retrieving the data from Access.
I'm basically working with Access 2003 with a database containing all the clients information with email and personalised messages and it needs to be sent out through Lotus Notes R5 Release 5.0.11
I've done searches on this site and I've found many codes but I was wondering if there was a beginner's guide to this.
If anyone has links to where I can read up on it that would be great too.
Your help is much appreciated. Thanks in advance for your help.
I have a list box which has several columns. What i'm trying to do is have a button that when clicked takes the values of the selected list box item and put them into a new lotus notes email. It doesn't need the address or any other detail, just the info into a new mail. I have seen some post's here but not sure i understand them (bit of a noob to access/vba).
Is this possible to do and can someone please point me in the right direction?
I am sending emails when the user press a button, but the problem is:
1 - How to check is LNotes is open 2- How to know if the user needs to enter the password.
With the following code an email is sent ONLY if notes is open AND the psw is not required.
Public Sub Sendmailf(Task As String)
Dim nSession As Object Dim CurrentUser As String Dim DataBaseName As String Dim nDatabase As Object Dim nMailDoc As Object Dim nSendTo(60) As String 'array for 60 e-mail address Dim EmbeddedObj As Object
Set nSession = CreateObject("Notes.NotesSession") CurrentUser = nSession.username DataBaseName = Left$(CurrentUser, 1) & Right$(CurrentUser, _ (Len(CurrentUser) - InStr(1, CurrentUser, " "))) & ".nsf" Set nDatabase = nSession.GETDATABASE("", DataBaseName) Call nDatabase.OPENMAIL Set nMailDoc = nDatabase.CREATEDOCUMENT With nMailDoc
Does anybody know how I can change the default mail client from Outlook to Lotus notes? I'd like to use the sendObject utility to create a macro which sends data I enter into my form.
I used sendobject to send the object via Lotus Notes, but I want to skip to click the Send button from the Lotus Notes, everytime, when I sent, it goes to the Lotus Notes, then I need to click the send button again on the Lotus Notes for confirmation to send the mail. How can I skip it?
I want to send an email thru Lotus Notes by clicking on a command button and need some help.
I have a tabular form which displays info from a make-table query. I would like to have a command button next to each record, which when clicked will send an notice(email) to the corresponding email address.
I wish to attach to an email a specified "Shortcut" such that recipients will be able to simply click the "attachment and the Access application will open.
I have searched the forum quite extensively but the perspiration has overtaken the inspiration so any assistance would be appreciated.
Below is the complete code that I am using
Private Sub Combo206_Click()
Maint_Sup_Close = Now()' Update a field Dim Attachment As String Dim MailDoc As Object Dim AttachME As Object Dim EmbedObj As Object
Dim s As Object Dim db As Object Dim doc As Object Dim rtItem As Object Dim Server As String, Database As String Dim strError As String Dim PI As String Dim Description As String Dim Work As String
Dim Email As String Dim Docket As String
PI = Me.PI_No_1 Description = Me.Desc Email = Me.Created_Email Docket = Me.Docket_ID Work = Me.Work_Required
Set s = CreateObject("Notes.notesSession") Server = s.GETENVIRONMENTSTRING("MailServer", True) Database = s.GETENVIRONMENTSTRING("MailFile", True) Set db = s.GETDATABASE(Server, Database)
On Error GoTo ErrorLogon 'see if user is logged on Set doc = db.CREATEDOCUMENT On Error GoTo 0
Set doc = Nothing Set db = Nothing Set s = Nothing Set rtItem = Nothing
MsgBox "Message Sent"
ErrorLogon: If Err.Number = 7063 Then MsgBox " You must first logon to Lotus Notes" Set doc = Nothing Set db = Nothing Set s = Nothing Set rtItem = Nothing End If
End Sub
I am a bit out of my depth and would appreciate a guru correcting the error of my ways
Hello everyone, I am having some issues getting past primary keys. A little background on what I am doing:
I am a Lotus Notes Programmer by design. We have decided to move away from Lotus and Access seems to be the choice to replace some of our applications. I have created a DB in access 2003. I have my tables created. I have my forms created. I was able to export from notes about 70,000 documents. In notes I had one main form and from that one could create any number of children documents(the parent doc generates the key and its passed to all the children documents...so some records in a ccess in the same table will have the same key. I set to DUP's OK for those tables). The documents are link by their unique document ID's. Well I needed to maintain that relationship when importing the documents to access. Which is working without a hitch. BUT where I am stuck is on new records. I need the same field that is linking all of the imported documents to autogenerate a primary key for new records..and I need that key to be passed to all the other tables in which I am storing all of the other children documents(records). Not sure how to get this done...
I hope I explained enough if not please me know what other information you need to try and help me out.
I need to create an email with an Access report attached as a PDF. I am using Access 2007 and Lotus Notes.If I use SendObject with acSendReport and acFormatPDF, it opens an email just fine but the attachment is created with some random letters and numbers and .tmp as the file name.
If I use Adobe Reader to open the attachment it displays correctly as a PDF, but I need the attachment name to be .pdf so it will automatically open with Adobe for the users.Is there a way to accomplish this with Lotus Notes? I have searched this forum and found some options for Outlook users, but not for Lotus Notes.
I have a query which reads a table, calculates some values and updates some of the table's fields. The issue that I have is that sometime (and randomly) the update skips one record. The query uses an inner join and looks as follows:
Code: UPDATE TEMP4 AS t1 INNER JOIN TEMP4 AS t2 ON (t1.Month = DATEADD(""m"",1,t2.Month)) SET t1.index=(1+t1.ratio)* t2.index, t1.ratio = IIF( t2.index=0 ,t2.ratio, t2.index)
I can run the query multiple times without seeing any problem. When the issue occurs I do not receive any error.
I should also add that the query/update is run via VBA code. Not sure if this makes any difference.
Why this happen and how I can force the query to always update all records?
I have a report where I read the value of a field in my query (a boolean) field, and if the value is true, I display two lines on my report, hide the lines if the value is false. Here's the code:
Private Sub Report_Page() If Me.Flagged.Value = True Then Me.Line102.Visible = True Me.Line95.Visible = True Else Me.Line102.Visible = False Me.Line95.Visible = False End If End Sub
This code works great.... except on the first page of the report! If I run the report in break mode, I can see that it evaluates my condition as "False" on the first record, regardless of the actual value in the field.
My report is based on a query that has some conditions in it, but, everything works correctly - except page 1.
I have code which is attached to onclick of a checkbox,
What I want it to do is if the user clicks it and checks it then to add some note to a memo field, if the user clicks it and its already checked then it doesn't add a note to a memo field.
Code: Private Sub Check45_Click() If Check45 = 0 Then Check45 = 1 If Len([Forms]![Customer]!Notes.Value & "") = 0 Then
[Code] ....
But I can't seem to add any other lines which make sense to me that it doesnt add "letter sent" to a memo field if its already checked?
