Modules & VBA :: Loop Through A Recordset And Send Appointments
Aug 2, 2013
I have this code (below) that loops through a recordset and sends appointments. It executes the queries correctly and sends all appointments in the table, but sends them only to the contacts listed in the first record of the query. How do I get it to loop the contact details?
Code:
Private Sub SchedFollowUp()
Dim rsFollow As DAO.Recordset
Set rsFollow = CurrentDb.OpenRecordset("SELECT * FROM Follow_Up WHERE HR_Approved = True AND Added_to_Outlook = False AND Cancelled = False;", dbOpenDynaset)
Dim rsEmployee As DAO.Recordset
[Code] ....
View Replies
ADVERTISEMENT
Oct 18, 2013
I am setting up a database to track preventative maintenance required for testing equipment in our repair shop. Some of my associates would like to be able to send e-mail notifications via the database when maintenance is due. I set up a query to show the people who need to receive an e-mail and a query to show the maintenance each person needs to perform.
Each person will need to perform more than one maintenance step each time. I would like to get it so that the database will loop through the first query and generate one e-mail for each person. I would like the e-mail to list all the steps that person would need to do (as shown in the second query). I know this would require setting up loops and I'm afraid I'm not very good at writing loops.
I think this will need two loops. One to loop through the first query to see all the e-mails that will need generated and one to loop through the actions to be included in each e-mail. The person's name is included in both queries and can be used to set up a link between the two.
View 5 Replies
View Related
Jun 4, 2014
Is there a way of looping through a non update able continuous subform, and using information from each line.
Which creates a new record in another table? so if there are 3 records in the subform it creates 3 new records in the other table and so on?
View 3 Replies
View Related
Jun 16, 2014
Im trying to create a record set that compares a quantity value in the recordset to a Value in a temporary table that holds the most recent remaining quantity. I have the following code in the after update of a text box, but it does not trigger. I want it to run after a value is entered into the text box. Is the code wrong or the location im putting it incorrect?
Code:
Private Sub txtQty_AfterUpdate()
Dim rs As DAO.Recordset
DoCmd.OpenQuery "qryQuantitySoFar"
Set rs = Forms!frmReceive!sfrmReceiveDetailEntry.Form.RecordsetClone
[Code] ....
View 11 Replies
View Related
May 8, 2014
I am attempting to use 2 fields from a query to supply the Top and Left Properties of a Collection of Rectangle Controls on my form. The purpose of this is to display the locations on a map of "Spots" in a haunted house. The query that I am using shows the spots that have been pre-tagged with the location of where they belong on the map (currently the query has only 24 tagged spots). On the actual form I have rectangle controls (control type acRectangle) with their visible property set to False by default, named box1 through box25 (there will be more eventually, as I am just working with this test group).
I started with the following code, yet it stops after (correctly) placing the first spot on the map (please see the attached jpg):
Code:
Private Sub Form_Open(Cancel As Integer)
Dim ctl As Control
Dim db As DAO.Database
Dim rst As DAO.Recordset
[Code]....
I'm sure I need to have 'Loop' in there somewhere, but I am not sure exactly where to place it, or if another line is also needed.
View 10 Replies
View Related
Jun 9, 2014
Is there a way of looping through a form record set, while adding new records to a different form record set? using some data from the 1st record set in the new records?
View 8 Replies
View Related
Aug 27, 2014
So I have a table "zztblArticles." Some fields should go to "tblArticles" and values in Tag_ID should go to a lookup table "tblTag" and a junction table "tblArticles_Tags." I'll explain the code I've written below:
Code:
Private Sub cmdSubmit_Click()
Dim db As Database
Dim strINSERT As String
Dim strVALUES As String
Dim rszztblArticles As DAO.Recordset
[Code] ....
The first loop through works fine, I get the records uploaded to all tables. The second loop through fails at
Code:
intArticleID = DLookup("ID", "tblArticles", "Sourcing_Date = " & !Sourcing_Date)
Because it can't decide which ID value to use. This is because the value has been duplicated in tblArticles after the code acts on the same record again. It has completely failed to move to the next record in the recordset, despite the .MoveNext before the Loop!
View 12 Replies
View Related
Jul 22, 2014
In my database, I have a continuous form with a Name, a Date and a Yes/No field.
When the form opens, I want to look at the date of every record on the form and show a message box if it is before the current day.
The code I have is this;
Private Sub Form_Load()
With Me.RecordsetClone
While Not .EOF
If Me.Date1 < Date Then
MsgBox "" & Me.Person & ""
End If
If Not .EOF Then .MoveNext
Wend
End With
End Sub
However, it loops just the first record the amount of times there is of records (i.e., it will only show the first person's name in the message box, and will show 3 times if there are 3 records).
View 7 Replies
View Related
Jun 26, 2015
I have 2 identical tables of asset information. Table 1 has 251 records while table 2 has 84 records. All 84 records are in table 1 right now. My end goal is to be able to click a button, have vba script run, and table 2 updates table 1 with any changes from different fields. I know there are merging options with query and what not but the exact structure of my tables doesnt play well with it.
Right now, my code is able to loop through the values of each computername and display it. For some reason, when it gets to the 130th record of table one, the loop skips it and returns the 131st record, it stays one ahead for the rest of the loop and then prints the 130th record finally.
Since I am trying to compare field values, this sudden shift throws everything off. why it skips?
Code:
Option Compare Database
Private Sub UpdateAssetsBTN_Click()
On Error GoTo Err_Proc
Dim rs1 As DAO.Recordset
Dim rs2 As DAO.Recordset
[code]....
View 2 Replies
View Related
Aug 17, 2015
managed to get some code up and running but when trying to enhance it I have hit a rut.
I have a function that is looking up a query called Optimisation - Auto Optimise with operational data in it. I only need 2 key fields; consolcode and volume. There are 106 records with different consolcodes each with different volume. e.g consolcode: Chittagong to Rotterdam201452 (Chittagong to Rotterdam by year "2014" by week "52") and volume 161 (cbm)
I then run a code that allocates the volume into specific sea freight containers and returns the values into a different output table.
The allocation code works fine but when I run the loop function for the recordset rsttradelane it runs for the correct amount of records (106) but always returns the first record of Chittagong to Rotterdam201452 and 161 cbm and not the other 105 consolcodes with the different cbm. Giving me an output table with Chittagong to Rotterdam201452 and 161 cbm repeated 105 times!!
Code:
Set rsttradelane = dbsEPIC.OpenRecordset("Optimisation - Auto Optimise")
consollane = rsttradelane!consolcode
ConsolVol = rsttradelane!Volume
Do Until rsttradelane.EOF
'Optimisation code' then
Code:
rsttradelane.MoveNext
Loop
rsttradelane.Close
How do I ensure that each consolcode and its associated cbm is recognised individually and flushed through the optimisation code?
View 3 Replies
View Related
Mar 13, 2014
I found this code and have substituted parameters to suit my own needs however the loop is not working. Only the first record in my recordset (which is a test recordset of only 3 records) is being updated.
Also, for testing only, the edit or update being applied is trivial: Description = "WHITE RESIN". If i can get the loop to work I want to substitute higher functionality to the module.
Private Sub Update_Click()
Dim dbs As DAO.Database
Dim rsQuery As DAO.Recordset
Set dbs = CurrentDb
Set rsQuery = dbs.OpenRecordset("qryRmResin", dbOpenDynaset)
[Code] .....
View 14 Replies
View Related
Jul 8, 2015
I have some code that loops the clone recordset of my subform and generates a email with attachments. I have mainform and continuous subform within the subform I have field called address this holds paths to files and another field called send and this is a yes/no field
Now what I'm trying to do is loop through the subform if send field is true then attach file from the address path but if send field is false then do not attach file
Code:
Dim olApp As Outlook.Application
Dim olMail As Outlook.MailItem
Dim olAttach As Outlook.Attachment
Dim rstAttach As DAO.Recordset
Set olApp = New Outlook.Application
Set olMail = olApp.CreateItem(olMailItem)
[Code] ....
View 14 Replies
View Related
Dec 9, 2014
I have this code here that sends an email out with all the needed info. The problem i ran into was that for my field "item" it is in a table called "test" and there can be more than one record in there. I just can't get it to loop and show me all of the records. Right now it shows me only the first record. Also it is showing the name of the table before the result so i am not sure what is wrong there...
Code:
Private Sub Command4_Click()
On Error GoTo Err_SendInfo_Click
Dim varTo As Variant
Dim varCC As Variant
Dim stSubject As String
[Code] ....
View 4 Replies
View Related
Mar 17, 2014
I have some code that takes from a query, an email address and sends out an email.Due the security warning that happens for each individual email, i want to create ONE email for all email address in the query and populate them to the BCC section of the sendobject.Here is the code that I currently use
Code:
Private Sub cmdSendEmail_Click()
Dim MyDB As DAO.Database
Dim rsEmail As DAO.Recordset
Dim sToName As String
Dim sSubject As String
Dim sMessageBody As String
[code]...
I want to populate the BCC field with multiple emails addresses seperated by ":" and send just one email.
View 4 Replies
View Related
Jul 25, 2006
Hi folks,
I have created a recordset and what i want to do is check the field value "SiteRAG" to see if it matches some criteria and if so do some action where the field "SiteID" = the same as a label on a form.
Please see CAPS in middle of code:
Dim db As Object
Dim rs As Object
Dim intCount As Integer, intRecordCount As Integer, intID As Integer
Dim strSQL As String
Dim strRAG As Long
Dim fldItem As Field
strSQL = "SELECT tblSite.SiteID, tblSite.SiteRAG, tblSite.Active " _
& " FROM tblSite " _
& " WHERE (((tblSite.Active)=Yes));"
Set db = CurrentDb
Set rs = db.OpenRecordset(strSQL)
intRecordCount = 0
rs.MoveFirst
CHECK THE FIRST ROW FIELD SiteRAG & IF = TO CRITERIA THEN
DO SOMETHING BASED ON A LABEL MATCHING THE SiteID
ELSE
MOVE TO NEXT ROW
Loop
rs.Close
db.Close
Thanks for any help
Mark
View 2 Replies
View Related
Aug 15, 2013
In a form I have a button which creates (in preview) an outlook message with a pdf report. It opens and displays just as I want it to, but if I chose to save that message in outlook and either send or cancel (i.e. allowing user to save to drafts and send later) then MS Access crashes.To ensure this wasn't to do with any compile / corruption within my full application I mirrored the process in a very simple 1 table / 1 form / 1 report db and still the same - access crashes after saving the outlook message and either sending the message or cancelling out the message.
Form code is as follows;Private Sub Command0_Click()
On Error Resume Next
DoCmd.SendObject acSendReport, "Table1", acFormatPDF, "someemaddress", , , , "REQUEST FOR INFORMATION"
DoEvents
On Error GoTo 0
End Sub
In my main application this process is embedded within a loop to send various filters of the report to different recipients, which works fine if 'save' is not used within Outlook..
View 1 Replies
View Related
Oct 18, 2013
I have a following problem: I have a form in continuous mode. Users are supposed to filter data in it to their liking using inbuild filters in Access. After that there is a button that should calculate total weights in filtered records (at this point, I add more calculations once I have solved this issue). Code of button is as follows:
Code:
Private Sub btnCalculateWeight_Click()
Dim rst As Recordset
Dim weight As Long
Dim material As Long
Dim subtype As Long
Dim locus As Long
[Code] ....
Loop goes through recordset correct amount of times but for unknown reason takes value only from the first record and sums it N times where N is number of records in recordset. Recordset seems to be correctly assigned according to messageboxes I added to pinpoint problem. PotteryWeights is a custom function I made and it works properly.
View 2 Replies
View Related
Jun 27, 2014
My application crashes when trying to change the value of a text box in a continuous form. Here is the code:
Code:
Private Sub cboPoCurrency_AfterUpdate()
On Error GoTo ErrHandler
Dim rst As Recordset
[Code].....
If I replace .txtUnitCost by MsgBox .txtUnitCost, it loops correctly through each record and returns the value. But if I try to change the value as shown in above code, MS Access crashes! (This is a desktop application with tables linked to SP lists - not a web app)
[URL]
View 14 Replies
View Related
Oct 19, 2013
I have been putting together code from bits I have found online that will create an appointment in Outlook from a date field in my form.
My form has a number of dates and I need to create appointments for each one. Is there any way I can incorporate that into the existing code? Or will I need to add command buttons for each date?
The date fields are:
[Date Template Made]
[Date of Top Cut]
[Date of Bowl Cut]
Code:
Private Sub CreateAppt_Click()
If Me.Dirty Then
Me.Dirty = False
End If
If Me.chkAddedtoOutlook = True Then
MsgBox "This appointment has already been added to Microsoft Outlook", vbCritical
[Code] .....
View 14 Replies
View Related
Jan 3, 2014
I created a form for scheduling appointments on access 2013 using a youtube tutorial. I got most of it work apart from the combo box that functions in a way that once the time slot has booked with a client it should no longer be shown in the list.
E.g.:-2/2/2014 10:00AM is already booked with a client
The combo box should no longer display the 10:00 AM timeslot but can be shown on other days
Below is the VBA code that i typed out. How to create the code to make the combo box work in that manner.
Option Compare Database
Private Sub cboTime_Enter()
Dim i As Date, n As Integer, oRS As DAO.Recordset, sSQL As String
Dim dLowerbreak As Date, dUpperBreak As Date, dDuration As Date
Dim dLowerPrecision As Date, dUpperPrecision As Date
cboTime.RowSourceType = "Value List"
[Code] ....
I found out that the combo box does not work like it does in the video i.e the option does not dissaspear even though their has been a booking with that time slot with another client.
Coding that is required to make the combo box work like that or is their an error within the code that is preventing the combo box to work in such manner ...
View 14 Replies
View Related
Mar 4, 2015
I am making a calendar form in Access and want it to look like Google Calendar as much as possible. I am wondering if there is a good way to go about setting up the form to allow for multiple appointments scheduled for the same time. Designing the form to be in Week View with half hour blocks has me at 210 text boxes. As far as I can tell, there isn't a way to dynamically add in controls unless you are in design view. However, how many appointments might be scheduled at the same time. I could add in as many text boxes as possible I guess, but that doesn't seem to be very efficient (and the base form is already at 210). Is there anyway to add in controls (such as text box or label) if a new appointment is added at the same time as existing ones?
View 5 Replies
View Related
Aug 14, 2015
Special situation: The SQL Server Linked Server across the country is linked to a Read Only Oracle DB. This data pull works perfectly and populates the Subform.
The problem is that Oracle can take 3 to 6 seconds to retrieve the single record depending on the network traffic through a small pipe.
The code below shows the RecordSource for the SubForm. clicking on a list box supplies the value. Then 3 to 6 seconds later, the subform populates.
The actual Recordset for this Recordsource is needed to conduct Validation on each field. Normally this would be on SQL Server, I might just create a Recordset Oject and run this SQL statement again in 1 milisecond. In this case, it will probably take an additional 3 to 6 seconds. Avoiding another lengthy round-trip to Oracle would be prefered.
Goal: How does one grab, clone, or other wise reference the existing recordset for the SubForm?
Note: Immediate Window - One single field can be returned quickly
There are 48 fields that need validation - is there a way to reference the entire recordset?
Immediate Window during Break Mode:
? me.fsubsrNavSHLBHL("NavSH_QQ")
NESE ' this is the correct value for the current recordsource
Set a breakpoint right after the line:
fsubsrNavSHLBHL.Form.RecordSource = "Select * from vsrNavigatorSHLBHL where Well_ID =" & txtNavWellID.Value
Immediate Window:
? me.fsubsrNavSHLBHL.Form.RecordSource
Select * from vsrNavigatorSHLBHL where Well_ID =91229
View 4 Replies
View Related
Jul 7, 2013
I want to write a email where there are 2 or 3 different ordernumbers for same email, i want to include the email in the mail part as single column table. how to do it? also can i use result of one recordset for other recordset?
View 1 Replies
View Related
Mar 11, 2014
I have to loop thru 2 recordsets.I need to first determine the quarter , then retrieve a value from each of the 6 fields for that quarter and compare that value against a previous years value that is also stored in the table for each quarter.the following is the field names not the field value.
Tier 1 2 3 4 5 6 PrYr
Qtr1 Q1T1, Q1T2, Q1T3,Q1T4, Q1T5, Q1T6 .385
Qtr2 Q2T1, Q2T2, Q2T3.Q2T4, Q2T5, Q2T6 1.25
Qtr3 Q3T1, Q3T2, Q3T3,Q3T4, Q3T5, Q3T6 .774
Qtr4 Q4T1, Q4T2, Q4T3,Q4T4, Q4T5, Q4T6 .333
if Qtr1 = Q1T1 = 0.44 Q1T2 = .50, Q1T3 = 1.45, Q1T4 = 3.00, Q1T5 = .25, Q1T6 = 6.0
So I need to be able to set the value of PrYR = .385 and compare against the value of the 1st qtr for each tier for Qtr1.Then go to Qtr2 and repeat the process but grap the Q2 PRYR value = 1.25 and compare against all Tiers for Qtr2.As so forth for each quarter.then I need to compare the value of the PrYr and if it is the following then
If PctYrlyIncrease< Tier1 Pct (Q1T1) Payout = 0
elseIf PctYrlyIncrease> Tier1 Pct (Q1T1) and < Q1T2 then
Sum(TotalNetUSExp * T1E)
ElseIf PctYrlyIncrease> Tier2 Pct (Q1T2) and < Q1T3 then
Sum( TotalNetUSExp * T2E)
and repeat for each Tier per Each Qtr.Here is my code so far:
Code:
Public Function BkOvrCalc(ByVal gContractID As String) As Long
Dim curDB As DAO.Database
Dim strSQL As String, strSQL1 As String
[code]...
View 3 Replies
View Related
May 11, 2014
Here is the code:
Private Sub Form_Load()
Dim rs As Recordset
Set rs = CurrentDb.OpenRecordset("select * from tblpatient, dbOpenDynaset)
If Not (rs.BOF And rs.EOF) Then
rs.MoveFirst
Do While Not rs.EOF
' do stuff
rs.MoveNext
Loop
rs.Close
Set rs = Nothing
End If
End Sub
I have watched it step through on debug and it does everything right for the first record, but it seems to come back to the same record.
View 3 Replies
View Related
Feb 23, 2014
I have a form where a textbox has shows the NameNo from the NameNo column in a db. At the moment I am using a dlookup to set the textbox = to the NameNo, but obviously this is only returning the 1st value in the column. How to get this form to automatically display each NameNo, creating a pdf of the form and then moving on tto the next nameno. I have the code to make the pdf working so far, all I need now is to figure out how to use the textbox to loop through all the NameNo's in the table.
View 3 Replies
View Related
