Modules & VBA :: Loop Through All Text Boxes On Form?
Aug 23, 2013
I have about 25 text boxes that get populated based on a financial transaction; quite often about half of them are empty. i wanted to gray them out if they are emtpy (.enabled = false). I could put a series of IF statements in the vba for each one, but its bulky and time-consuming. I've done for each record in tables and recordsets. Is there a way to do a for each textbox on a form?
I some code that is reading the first 32 lines of a text file and paste the results into 1 text box on individual lines. I would like each line to go into an individual text box.
I have 32 text boxes named txt_1, txt_2, txt_3 I have a variable named ThisLine holding the line of the text file. I have a variable named textBoxName holding the name of the control.
Need to putting these together to write the line to a text box .
Code: Sub ReadFile() Me.txt_newData = "" Me.txt_OrigData = "" 'again, we need this strange thing to exist so that ... Dim fso As New FileSystemObject
i have a calender of which show's records on date box's i m having a issue when i double click on a datebox it opens a form call update which is filtered on open to show only records for this date but on date boxs on 1st to the 11th i have add the code to do this but when the form open's the form is blank and shows no records but the code works fine for 12th to 31st which i can't understand why? as im using the same code that does dateboxs 12th to 31st on datebox 1st to 11th but doesnt work i'm pulling my hair out on this one !!
I have around 30 text box on a form and trying to insert the value of those 30 text boxes in a table from vba.
Here is my code
Private Sub Submit_Click() Dim a, b, c, d, e, f, g, h, i, j, k, l, m, n, o, p, q, r, s, t, u, v, w, x, y, z, aa, bb, cc, dd As String Dim SQL As String a = Month b = Week c = Type_of_Contact d = Country
[Code] ....
From above code I am not able to get my working done
Can we use a variable in referring a field in insert query?
I am using variable because I am not able to write the whole code in a single line and when i am pressing enter it gives me a error.
I have a form where a textbox has shows the NameNo from the NameNo column in a db. At the moment I am using a dlookup to set the textbox = to the NameNo, but obviously this is only returning the 1st value in the column. How to get this form to automatically display each NameNo, creating a pdf of the form and then moving on tto the next nameno. I have the code to make the pdf working so far, all I need now is to figure out how to use the textbox to loop through all the NameNo's in the table.
I have an unbound mainform and an unbound subform(datasheet). The source of the subform is a query which is dynamic(I have many queries with diffrent columns). the subform source is change using a combo box selection. I have text boxes in my mainform..how do I get the data from subform to the text boxes of the mainform?
I'm trying to build an database for aircraft operators. I've got the basic tables structure and relationships but I'm stuck on building an search form to filter records by user input.I've got following controls on my form (unbound):
1. AircraftType (combo box) from tblAircrafts 2. CompanyName (combo box) from tblListOfAircraftsOperators 3. TeailNumber (text box) from tblAircraftOperators 4. AirportNameSearch (combo box) from tblAirports 5. PassengersNumber (text box) from tblAircraftOperators 6. ManufactureYear (text box) from tblAircraftOperators 7. SourceSearch (combo box) from tblInfoSource 8. CountrySearch (combo box) from tblCountry 9. CategorySearch (combo box) from tblAircraftCategory 10. EamilToOperator (text box) from tblAircraftOperators 11. InteriorPhoto (Bound object frame) from tblAircraftOperators 12. ExteriorPhot (bound object frame) from AircraftOperators
I need to enable users to search for aircrafts based on those criteria. As I mentioned I'm new to Access and I don't have any advanced coding skills. I have a query build to perform the search and this is the code I've managed to write so far:
I have a form on which there is a series of text box controls relating to different frequencies. At the moment I enter a value in to each of these manually.
However, I would like to have an unbound text box where I can paste in all the values (6 or 8 of them) from excel and then press a button and they would be copied in to the individual boxes.
So far I have my design:
I'm not sure where to start with regard to the code as I don't know how to handle delimited text - is it column delimited in excel?
I imagine some sort of loop, such as a do until will be required but again not sure.
I have a sample database (attached) where I have a form called frmVoteHeadsOne. The voteheads that I have are swimming (Swim) and transport (Trans), which both appear for data in a table. On the form, from the combo list, I would wish that if I select swimming, for example, only Mark Tyler's name is returned since he has paid 2000; if I select Transport from the same list, only John clement's name is returned.
My purpose for doing this is because in the actual database, I have 21 different voteheads which I would like to get different results from based on what the user selects from the combo list.
In my database, I have a continuous form with a Name, a Date and a Yes/No field.
When the form opens, I want to look at the date of every record on the form and show a message box if it is before the current day.
The code I have is this;
Private Sub Form_Load() With Me.RecordsetClone While Not .EOF If Me.Date1 < Date Then MsgBox "" & Me.Person & "" End If If Not .EOF Then .MoveNext Wend End With End Sub
However, it loops just the first record the amount of times there is of records (i.e., it will only show the first person's name in the message box, and will show 3 times if there are 3 records).
We have a survey form we are trying to get some information from, and I think I need a loop to get the information, but there isn't a ton of information that I have found for what I need to do.
I have a six question survey that has a range of answers and a comments section (I didn't write the survey):
I have a simple query that will separate out the overall Positive and Negative reviews. The overall "Positive" or "Negative" ranking is manually assigned via a combo box on a form from a value list. Poor comments in the comments field can equate to a negative survey, even if questions 1-6 are neutral or better (good, very good, etc.)
What we would like to do is to poll through the responses to the survey and see how many of question 1-6 are consistently receiving Neutral or lower marks.
In my head, it makes sense to count through all the surveys and get a number of those responses. The response table (tblResponses) is setup with a combo box from a look up table that has the above responses. Actually, there are two lookup tables for this...one for question one, and one for questions two - six.
I basically want to Loop through a query (or if not possible trough a table) and show the results in my form. For each record in the table I am doing additional checks when loading the form and showing that result accordingly. I do not want to do these checks in additional queries - I think it is more efficient doing it in the form directly. Here is the code I have:
Dim dbsSR As DAO.Database Dim rstValQry As DAO.Recordset Set dbsSR = CurrentDb Set rstValQry = dbsSR.OpenRecordset("qry_val_tbl_ind_rec-rev_import") With rstValQry While (Not .EOF)
[Code] ....
The Loop seems to work because in debug it is going through it 3 times (the number of records I have in the query), but the result is always the same - it seems the above code is not checking / refreshing based on the individual query records.
I am having a little problem with making an audit trail for a form with some unbound text controls on it.
Since .OldValue won't work on unbound text boxes, google suggested that I put the old value in the control's tag property. This is what I came up with:
Code: Dim ctl, tbox As Control Dim strName, strOLD, StrNew, NewTag As String Dim NextOne As Label For Each tbox In Me.Controls If TypeName(tbox) = "TextBox" Then Select Case tbox.Value
[Code] ....
The first loop is supposed to dynamically assign the tag value, with whatever the textbox value is, however it doesn't. I've asterisked out the line i think may be the issue.
I have a form with three text boxes and i am trying to figure out how to ensure atleast one of these boxes is required and would error if none of these are completed.
I have a listbox where the rowsource is a SQL statement. I didn't know if I should try that or just use a query for what I am doing. The listbox is based on our client table, which is a huge number of people, and is showing 3 out of 5 fields.
I have two text boxes, one for first name and one for last name.
I would like the listbox to filter as I search by either field OR by both. Right now, I have the on change event for each with a SQL statement with a Like '*" & Me.textboxname.text & "*' and then a Me.clientlist.rowsource= at the end. So I can get each text box to filter the listbox individually, but I can't get it to filter with both. I think it is a matter of the focus changing, but I could be wrong.
I have a form with 10 combo-boxes. Once user selects a value in CB1- CB2 becomes visible and active. I am trying to run a dynamic query- where the selection of the combo-box is used to select a column from my table called "dbo_animals"
To elaborate: CB1 contains the following values
Code : elephant, giraffe, bufffalo, tiger, lion
Once the user selects elephant in CB1, CB2 becomes active and I select tiger next. So the query becomes like. The process can go on and the user can select up to 10 animals
Code : **SELECT elephant, tiger FROM dbo_animals**
Problem: I am able to create the query with string manipulation- Unfortunately due to the way the loop through controls is set up- The query is unable to convert the text into a reference. If I hard code it as
tempquery = "SELECT [Form]![Animal Finder]![CB1] FROM dbo_animals" MsgBox(tempquery)
It looks like
Code : SELECT Elephant from dbo_animals
This is how I want. But, since i am looping through CB controls, I have it set up as
Code : tempquery = "SELECT" & " [Form]![Animal Finder]![CB" & i & "] FROM dbo_animals"
and this shows up as
Code : SELECT [Form]![Animal Finder]![CB1] FROM dbo_animals
Thereby giving me an error saying that the reference is not valid and asking me for a parameter value.
This makes sense, since it is unable to evaluate the text as a reference.
How do I correct the text into a reference? Or How do I build a query with adjusting columns based off selections from a combo-box and loop through the comboboxes in the form while auto-updating the query?
I have query that creates table with 2 records each with 2 columns (2x2) and they do not have indexed ID,and query is related to combo box in other form so results are not always same but it is always (2x2) and value types are always same,
So how to show those results in text box in form,lets say 4 text boxes ,every value in one text box, i assume that i need to use DLookup() but i was able only to show first record,did not know what criteria put to go to second record.
When i select that query and create report i get what i want but i cant copy those text boxes to form that i want.
I would like to be able to join 2 text boxes and then copy them to clipboard. My initial fumbling has had me to joing the 2 text boxes as a string and then set that string as the value of another hidden text box and then copy that text box.
This does work but I would like to format the output if possible to remove the element identifiers? The string copies out as below.
Title Information<div>Description Information</div>
Is it possible to remove the <div> and any other elements that may appear either using my method or another way. Not sure if they are appearing as the Title box is plain text and the description is Rich?
I have a form with three text boxes and one button. I want to use these three text boxes as parameters for specific query, thus i want a code that has the ability to pass these three value to query parameters or another code to solve this problem.
I'm developing a form to link a clause to one of a selection of internal documents from drop down boxes (of which there are a lot and hence looking for ways to make it more manageable to find).Now the setup of the internal documents is unfortunately beyond my control (separate SharePoint Libraries, inconsistent fields, you name it they've picked the worst way to do it :P).
I figure the best way to do this is to set up some unbound controls - two drop down (to narrow down location/department), two text boxes (doc code and name) with the idea that it will limit the selection to anything 'like' what is typed in.What I would like is either: How to set the RowSource criteria to only apply if the relevant control is not blank (i.e. if all the boxes are blank, all docs will show; if 'Sales' is selected in department and the user types 'Sales Order Entry' only the Sales Documents relating to order entry will appear)How to add criteria to the RowSource of a dropdown box via VBA (I've created the relevant 'If then ... else' statements but not sure how to add rowsource criteria in VBA)
We're looking at a way that we can easily display what stage our clients' email marketing campaigns are at - in one section of our CRM our Campaign Manager will enter information on whether the campaign has broadcast (ie: emailed out to the required circulation list(s)), if we're waiting for artwork from the client or if we're chasing for that information.
I have four text boxes (date format) hidden on a subform that I need to pull ONE max date from.
So, as an example:
Email1 (our first email to the client chasing for artwork) = 01/01/2015 Email2 (our second email to the client chasing artwork) = 08/01/2015 Email3 (our third chase email) = 15/01/2015 Broadcast (the date the email campaign was finally sent) = 29/01/2015
I would need some code to show in an unbound textbox "Broadcast: 29/01/2015"
But, on the other hand, if the dates looked like this:
I would need some code to show the following in an unbound textbox "Last Chased: 08/01/2015"
So we can easily see the status of our marketing campaigns at any stage in the process.
I've tried using IF THEN ELSE statements in the subform's On Current event, but that populates the information from the record you've selected across all the other records on the sub as well.
So I'm wondering if it's worth setting the Control Source of the unbound textbox I want to display the campaign status in as a bunch of nested IIF statements instead?
I want it to filter out any matches between the 7 fields. Here is my code:
Code: Private Sub Command19_Click() Dim strFilter As Variant, _ strSDate As String, _ strEDate As String 'check Text13 Text13.SetFocus 'set focus to Text13 to be checked
[code].....
It will only filter for Build Date 1 and not for any of the other fields.
I have two unbound text boxes and a search button adjacent each that allows me to search for a user via two methods:
1) Payroll ID 2) Surname
They have the following code:
txtPayrollIDSearch
Code: Private Sub txtPayrollIDSearch_AfterUpdate() Dim sWHERE As String sWHERE = "[PayrollID] = " & Me.txtPayrollIDSearch sWHERE = "[PayrollID] = '" & Me.txtPayrollIDSearch & "'"
[code]...
Then minor differences between the above and the Surname search.I have two questions:
1) How do I make the search more friendly by allowing it to find partial matches, i.e., a user has a surname of 'Smith' but I want to search for 'Smi'?
2) How can I display further error messages if there aren't any matches?
Table name: Items Field: ItemName Form name: Frmpayments
when I open the above form, it should create texts boxes on "frmpayments" based on how many data available in "Items" table under "Itemname" field. It'll be even better, if it can put those item's name in each text box it creates.
I have an access project that I am working on and need to be able to select multiple items from a listbox and have the exact selections appear in a textbox on the same form. I have looked around and have not been able to find any code that works.