Modules & VBA :: Make Multiple Tables Using Parameters From List
Jun 11, 2013
I've got a table of associate directors "t_ADnames" and want to build separate tables for each AD name that pulls a pass through query from our data warehouse. I'm thinking it's got to be done with a macro somehow? So it would run pass_query where AD name = "John" and insert into t_john, then it would check the next name in t_ADnames and run the same query for say "Mark" and insert all his data into t_mark and so on until the list (of about 12 people) has been completed.
I have got an unbound multiple list box called List44 (Row Source: query based on table tblAircraftCategory, Multi Select - Extended) that needs to be passing parameters to my main query called AircraftSearch2. The multiple choice list box have the following fields:
1. Piston 2. Turbo Prop 3. Entry Level Jet 4. Light Jet 5. Super Light Jet 6. Midsize Jet 7. Super Midsize Jet 8. Heavy Jet 9. Ultra Long Range 10. Helicopter 11. Air Ambulance 12. Cargo 13. Vip Airliner 14. Airliner
The user will use the form for selecting search criteria (the form is called SearchForm2 and has 5 combo boxes, 3 text boxes and one multiple choice list box).
I'm very new to access and need to modify (or coding a separate module) my query to include my multiple choice list box in my query?
Is there a way of doing the above? I have several distribution lists (some >100 recipients) defined in Outlook, and would like to use the Docmd. Send Object command to send messages to one or several of them. I cannot find a way of defining a distribution list as any of the To, Cc or Bcc parameters.
I created a query in Query Builder which contains a DCount with multiple parameters and it runs as it should. I am trying to convert it to VBA, but my inability to put in the quotations marks correctly is frustrating me terribly.
Here is the SQL version from Query Builder:
UPDATE [Daily Status Update Table] SET [Daily Status Update Table].NumberOfChases = DCount("[ChaseOtherID5]","[Chases_View_ALL - TX_Mbr 9 Digit]","[ChaseOtherID5] = 'U - Initial Contact' AND [ChaseStatus] = 'A'"), [Daily Status Update Table].ChaseStatus = "A", [Daily Status Update Table].NewStatus = "A", [Daily Status Update Table].ChaseAssignment2 = "Unscheduled" WHERE ((([Daily Status Update Table].ChaseOtherID5)="U - Initial Contact"));
Runtime Error 3075? I have attached a copy of my database. I am trying to make a calendar form with the list boxes having two columns. It works fine with the strFieldID and strFieldName but when I try adding the strDone I run into the error.
I have two tables with compatible data. Table 1 has 23 records and table 2 has 5 records. I am trying to make a "make Table". But instead of a table with a combined 28 results, I get 115.
I have a table with 3 fields. The fields are down1, down2 and down3. . I would like to use this table to create a new table (downtime). What I need too do is loop through each record in the table and place the three fields independently in my new table. For example, I would like to go to the first record in my original table, than place down1 as my first record in my new table, down2 as my second record and down3 as my third. Than I will go to the second record in my original table and place down1 as my fourth record, down2 as my fifth record, down3 and my sixth record and so on.
I have a form called frmNotInvoicedSearch and on that form i have an list box called listCompanyClient populated with our client's names.I then have a command button called cmdOK that brings up a search results form called frmNotInvoicedSearchResults.
Currently i can select one of the records and when i click ok it brings up the search results for that selected record.Is there a way that i can hold in the ctrl and select multiple options and the search results report as such?
I made a database that in one of the forms, I like by clicking on a button the user be able to select 5 excel files with different file names (in the same directory) and then based on the imported file's names, it be stored in 5 different tables.
At the moment by using the bellow code, I can import multiple files (with the same formats) only into one table . My vba code comes as follow:
Function GetAllFiles() Dim fd As Object Dim strFilter As String Dim lngItems As Long
Const msoFileDialogOpen As Long = 3 Const msoFileDialogViewDetails As Long = 2
A small issue I was wondering of for a few day . Is it possible in SQL query to SELECT multiple fields from multiple tables ? Example for the question is
Code:
dim my_var as String my_var = "SELECT Emp_FName , Emp_LName , Emp_Adress " _ & " FROM Table1 " _ & " AND Emp_Date_Of_Payment , Emp_Sum_Of_Payment " _ & "FROM Table2 " _ & " WHERE Emp_ID = 3 "
Is this code actually valid in SQL gramatics , and is it usable if passed to a Recordset variable ( rs = CurrentDB.OpenRecordset(my_var) ) ? Just FYI - The two tables are not related and I want to keep them that way (If possible relate their records just via SQL/Vba )
I have a list box populated with record ID's all of which need a date field updated. I have been succesful at using the list box to update single records, but am not sure how to transfer this idea to work with multiple records simultaneously.
The code i am using is:
Private Sub Command13_Click() Dim i As Integer Dim strSQL As String Dim sMessage As String Set db = CurrentDb() Dim sTitle As String For i = List10.ListCount - 1 To 0 Step -1
I have two table. Table 1 (assets) list all my assets etc. Table 2 lists all servicing for each asset.
I have a form which generates a list box of items that require servicing (once servicing has been completed on these items) I would like to update all records, in both tables. Table 2 with all the information about the service. and Table 1 with (only) the next service date.
I have set the list box to allow multiple selection and have used the following code to allow new records to be update in table 2 (which works). but I cant seem to get the code to edit one cell in table 1.
private Sub Command59_Click() Dim strSQL As String Dim db As DAO.Database
I created the below query to come up with a new form. When I enter a single parameter, it works fine. When I modify the code and enter multiple patameters, it also works fine if I do not enter any information for the parameters. But once I enter one of the parameters information, then it does not come up with anything. I double checked and made sure it was typed in correctly. Is there a trick when entering multiple parameters on a query?
SELECT [JE 06 Log].[Operational Region Name], [JE 06 Log].[Period Name], [JE 06 Log].[Source System], [JE 06 Log].[Source Name], [JE 06 Log].[Category Name], [JE 06 Log].[Associated Category Name], [JE 06 Log].[JE Name], [JE 06 Log].[JE Base #], [JE 06 Log].Area, [JE 06 Log].[Line Description], [JE 06 Log].[Natural Account], [JE 06 Log].Description, [JE 06 Log].[JE Entry Date], [JE 06 Log].[Debit Amount], [JE 06 Log].[Credit Amount], [JE 06 Log].Amount FROM [JE 06 Log] WHERE ((([JE 06 Log].[Period Name])=[Enter Period]) AND (([JE 06 Log].[Source Name])=[Enter Path]) AND (([JE 06 Log].[JE Base #])=[Enter Base Number]) AND (([JE 06 Log].[Natural Account])=[Enter Natural Accnt])) OR ((([Enter Period]) Is Null) AND (([Enter Path]) Is Null) AND (([Enter Base Number]) Is Null) AND (([Enter Natural Accnt]) Is Null));
Inside you can find one form with listbox (with multi selecting ability).
I use this code :
Dim strSQL As String Dim i As Variant With Me.se1 For Each i In .ItemsSelected SQL = "DELETE '*' FROM [t1] WHERE [id] = " & .ItemData(i) & " ;" CurrentDb.Execute (SQL) Next End With Me.se1.Requery
Result is this one : 1) If I delete only one item in list, it is ok. I can do it again and again and it is working fine.
BUT
2) If I delete more items in list at once, it is ok - but if I will try to do it again then there is an error because .ItemData(i) value is Null.
I am trying to use a list-control on a form to let the user select multiple values. I have understood that this requires some VBA-code to step through the selections in the list, since the "multivalue-selection" is set to "Extended".
When I try to execute the code I have (found and have tried to adjust), then I get the error message "Object required". The "ListCount"-paramater always only results in a ZERO-value, when i step through the code:
Function cmdOpenQuery_Click() On Error GoTo Err_cmdOpenQuery_Click Dim MyDB As DAO.Database Dim qdef As DAO.QueryDef Dim i As Integer Dim strSQL As String
I have a field in a table called reasons. Then I have a list of possible reasons in a drop down list for my form. I want to create a report that allows the user to select from a drop down of these reasons and do a query for only those records with that specific reason. I know you can ask that info be typed in by using brackets in the query but instead of typing the reason I want to be able to select from the drop down list to produce the report. Can this be done?
My database contains information about events running in different areas. I want to make the filtering options for this information as flexible as possible and so want a query where most of the fields can have criteria set, but where they can optionally be left blank and so the data will not be filtered on that field. To do this, I am trying to create form which collects together the parameters required by the user which the query can then pick up.
I want to use list boxes which contain all the entries for a particular field, looked up from the original table (e.g. all the different town names from the town field of all the records). This will allow the user to select the one(s) they want to filter for.
However, using list boxes presents me with the following problems, with which I would appreciate help:
1) How do I refer to a list box from a query and get the correct code created? I could do this where I'm just refering to a text box, but then a text box only contains one value. How do I tell Access to look for any of the towns selected in a list box?
2) There will be options on my form to filter the data by any of the fields of which it is made up. Obviously, the user will not want to filter every field and so I need a way to tell Access that if the user has not made a selection for a particular field, then it should not filter that field when the query runs.
If anyone can help me with these two things I would greatly appreciate it. I've so nearly finished developing a new system and this is the last hurdle I need to overcome!
I have a DB where you there's 5 tables all linked together by one project ID
tables below
Project , Staff, Asset, allowances, travel, mark up
What I can do is create a new project, then add records to each of the other tables on what different items I require,
i.e. I create a new project - called project one, in the project table I create a record stating, name, time scale, client and location, then I add different records to each of the other tables on what I require all linked to the same project ID. (probably not explained that too well)
Now I want to create a query that lists all the requirements one after the other this will make it easier to create reports and to calculate costing's.
At the moment I have made 5 different queries listing all the data, then have one report containing 5 sub reports to display the data, no this does work.
The columns are PayPeriod, StartDate, EndDate, FiscalYear
What I want to be able to do is highlight a chunk of dates and have the first selected StartDate and the last selected EndDate populate two hidden text boxes so I can use them for my queries/reports.
I've tried a couple different ways. Each time what happens is it only uses the last item I have selected in it's calculations.
Code: Dim ItemIndex As Variant For Each ItemIndex In Me.lstPayPeriods.ItemsSelected If Me.lstPayPeriods.Selected(ItemIndex) And Me.lstPayPeriods.Selected(ItemIndex - 1) = False Then Date1.SetFocus Date1.Text = Me.lstPayPeriods.Column(2, Me.lstPayPeriods.ListIndex) End If Next
In this example I tried to have it go through each Item of the listbox. I wanted to check to see if the current row was selected and the row before it wasn't. That way I could determine it was the first item selected in the group of selected items. It would always only use the last item I had selected.
Code: Dim CurrentRow As Integer Dim FirstDate As Date For CurrentRow = 0 To Me.lstPayPeriods.ListCount - 1 If Me.lstPayPeriods.Selected(CurrentRow) Then Date2.SetFocus
[Code] ....
I tried to do something similar with this code. Again, it only uses the last item I have selected.
I have created a search form which I would like to use to run a query (so the data is in a spreadsheet form and I can export it).
In this search form I have a multi select list box (simple) that list the states in the US. I need to be able to pass 1 or more states as a search criteria at the same time. Also I need it to pull ALL states if there is nothing selected. The search form has a bunch of fields on it that won't all be used.
I know once you select more than one thing from a list you can't reference it directly, is there a way to accomplish what I want to do?
So far I have a Multi Select enabled list on which the user selects the serial numbers they want. They then click the "Report" button which will trigger a query based on the selected serial numbers to create a report on those serial numbers.
I have the code for the multi-select list working already. It creates a string of comma separated values that are the serial numbers which are selected in the list. Somehow I need to pass this string to my query so it can use it as a filter.
Here is some of my code:
Code: Option Compare Database Option Explicit Private Sub Form_Current() Dim oItem As Variant Dim bFound As Boolean
[Code] ....
Here's my current query in SQL:
Then finally how to I get the query to execute and create a report based on all of this?
I am trying to strengthen an already developed database at my work. They had a form with five different text boxes, each one that would run a seperate query on the same table, and the results would open on a different page. I am trying to combine all these text search parameters from the form to a single query and have the result come up on the form. I have done every search I can thing of from a forum search, a google search, and just reading through query forum posts for about a day; but I still cannot tell what is wrong. If someone could look at my code, and see if I have a mistake, or if I'm even in the right direction. :confused:
SELECT FLIGHTS.[FINISH OD], FLIGHTS.[PIPE OD/SHAFT OD], FLIGHTS.PITCH, FLIGHTS.[TYPE OF MATERIAL], FLIGHTS.[BURNED OD], FLIGHTS.[BURNED ID], FLIGHTS.[RIGHT/LEFT HAND], FLIGHTS.PartNumber, FLIGHTS.COMMENTS, FLIGHTS.[START TIME], FLIGHTS.[FINISH TIME], FLIGHTS.PurchaseOrderNumber, FLIGHTS.QTY FROM FLIGHTS WHERE ((FLIGHTS.[FINISH OD]=Forms![KNOWN BURN SIZES]!Text25 & "*") And (FLIGHTS.PITCH=Forms![KNOWN BURN SIZES]!text37 & "*") And (FLIGHTS.[TYPE OF MATERIAL]=Forms![KNOWN BURN SIZES]!Text32 & "*") And (FLIGHTS.PartNumber=Forms![KNOWN BURN SIZES]!Text0 & "*") And (FLIGHTS.PurchaseOrderNumber=Forms![KNOWN BURN SIZES]!text36 & "*"));
The FLIGHTS is the main table, [KNOWN BURN TABLES] is the form that the parameters are entered. I want users to be able to enter any fields they want and leave others blank. Currently all I get is a blank query. Sorry if the answer seems obvious; I tried avoiding posting till I knew that I couldn't figure it out on my own.
I often use forms to select a parameter & date range for a subsequent report. Where I have chosen to use multiple combo boxes (two in this case)to select more than one parameter I have run into a problem. The report opens ok the first time but if I close it (report) and change my selection then the report refuses to open. Should I just requery the two combo boxes, is there something else or can't it be fixed?
I have this code of a command button, which would allow me to generate the result of the SQL. I think the code is wrong... Can someone help? I guess something wrong with the bracket...
Indeed, I try to modify the SQL that works in a test query (as I want to know what went wrong with my code): the changes would be replace OR to a toggle option.
SELECT NewsClips.IssueDate, NewsClips.Title_Eng, NewsClips.Titile_Chi, NewsClips.NewsSource, NewsClips.[1CategoryMain], NewsClips.[1Sub-Category], NewsClips.[2CategoryMain], NewsClips.[2Sub-Category], NewsClips.hyperlink, NewsClips.FirstTwoPara, NewsClips.Notes, NewsClips.attachment FROM NewsClips WHERE (((NewsClips.NewsSource)=[Which News Source]) OR ((NewsClips.[1CategoryMain])=[Which Category?])) OR (((NewsClips.NewsSource)=[Which News Source]) OR ((NewsClips.[2CategoryMain])=[Which Category?])) ORDER BY NewsClips.IssueDate DESC;
I'm trying to setup a parameter that has a multiple choice so to speak. Rather then the user being able to enter whatever data they want.. I would like them to have a choice between two items.
