What event would I attach code to, to have a message box pop up warning the user when that he is editing existing records.
I would like the message to appear not as the form loads, or as he tabs to the first control, but right as he makes any changes to the data displayed. Preferably the box should have a "OK" to continue the edit and a "Cancel" to undo it.
I'm successful in adding data from the form to the table using VBA. But I couldn't retrieve and edit the data. For retrieving and editing the data I have a different form "[Forms]![Editor]". I have all the fields listed in the image in both the form and table.
1. I want to allow the user to search and retrieve a specific row based on the condition Incident ID and the Package code are same
2. I want the user to edit the fields in the form and update it in the same row again.
But how do I have a message box pop up that warns the user he is about to edit an already entered record?
Is there a setting for this in the form design. Or do I need VBA, in which case what form event would I tie the msg box too?
I have written the following code. I want to change the status of my order when reminaing products shipped is equal to zero. When I run this code I get error " Cannot update. Database or object is read only". I think that this error is because that I am using the front end of the database.
Code:
Private Sub Form_AfterUpdate()
Dim dbs As DAO.Database
Dim rstTest As DAO.Recordse
Dim strQuery As Strin
strQuery = "SELECT OrderingT.Order_ID, OrderingT.UnitsRequested,OrderingT.OrderStatus, ([UnitsRequested])-Count([Product_ID]) AS [The Remaining
[code]....
I have a form and I want show a message on the form when the it is locked as another user is editing the data in a particular record.
I know the record selectors show the records lock status but it a very tiny symbol which will mean nothing to the users of the database and anyway I don't want record selector bar on the form. How I would do this???
I have a linked table to a DB2 database. this table contains key-pair values and has about 140k records.
I use a Sub to update the value of a specific record.
The sub starts by opening the needed DAO recordset
Then it uses the rs.Findfirst method
It checks if rs.Nomatch is not true (so the records exists!)
Then it starts updating the record with
rs.edit
rs!value1 = myvalue1,
rs!value2 = myvalue 2
rs.Update
There is where I get the '3021 No current record' error
I use the same sub on the same table to update to different parts. One part works the other gives me the error.
I have checked for typos.
I have a "Browse" button on a form that works fine. I would like to add a Message Box that warns the user that if they click "ok" on the message box they will start browsing, and if they dont want to do that click "cancel" in the message box. ( I know its obvious, bu thats what my friend wants). Is there an easy way to do this?
View 2 Replies View RelatedHow to change the default message of Exist table. the message shows like as. I wanna change this. How can i will do this?
View 1 Replies View RelatedI need to be able to produce an error on a form where the user attempts to create a new user that already exists. The error needs to be produced when the save button is clicked.
See below for the existing code on my save button which exists in form, 'frmAddEditUser':
Private Sub cmdSave_Click()
If IsNull(cboManagerID) = True Then
MsgBox "Please select a manager", vbExclamation, "Details Missing!"
Me.cboManagerID.Requery
[Code] ....
Currently, if I attempt to create a user with the same Payroll ID as an existing user, my 'User details saved' message box is displayed and to the user it looks like a new record has saved successfully which isn't the case.
I need a message box to appear displaying something like "Payroll ID n already exists" where n is the 'PayrollID' of the duplicate record. (Is it possible to combine a value from a certain control and ones own custom text?)
Note: PayrollID is a combination of letters and numbers, i.e. two letters, followed by 5 numbers, e.g. JD12345.
For reference, the table/field and and control are called, '[tblUser].[PayrollID]' and 'txtPayrollID' (on 'frmAddEditUser') respectively; it is from this field and control that I want the error to be produced if the user is entering the same values which are existing in 'tblUser'.
I am having difficulty getting the right record to carry forward into a modal subform to edit/update information. The Request_nmbr is an autonumber field. The client can have multiple requests. When I open my subform, I can scroll through the records, but when I launch the "update" button, I don't know how to carry forward the request_nmbr so that I'm updating the right record.
Here's my code:
Private Sub Btn_Exception_SubModal_Click()
DoCmd.OpenForm "Frm_Exception_UpdateModal", acNormal, , acFormAdd
Forms! [Frm_Exception_UpdateModal]![Request_nmbr].value = Me![Request_nmbr].value
Forms! [Frm_Exception_UpdateModal]![clientnmbr].value = Me![clientnmbr].value
End Sub
I've been asked to get some information from my database and I'm a bit stuck.
I have a list of refunds in tbl_main and each one includes a dateReceived. I make a record in either tlk_located, tlk_unableToLocate or tlk_bulk depending on the outcome when we're trying to send the money back to whoever it belongs to. Each table has a time stamp (named locatedTime, unableTime and timestamp respectively) field
My manager wants me to report how many entries were unworked on each day in the year, and what the value of them was. An entry is unworked if there is no entry in either of the 3 tables.
So I need a query that lists a range of dates, and for each date counts the number of entries where tbl_main.dateReceived is <= to that date and either has no record in located,unable or bulk or has a record with a timestamp > than the date. (It has been processed now, but hadn't been on the date we are looking at)
I can manage a query that looks at a certain date that it prompts for on each run:
Code:
SELECT Count(tbl_main.trust2PK) AS CountOftrust2PK, Sum(tbl_main.amountRefunded) AS SumOfamountRefunded
FROM ((tbl_main LEFT JOIN tlk_located ON tbl_main.trust2PK = tlk_located.trust2FK) LEFT JOIN tlk_unableToLocate ON tbl_main.trust2PK = tlk_unableToLocate.trust2FK) LEFT JOIN tlk_bulk ON tbl_main.trust2PK = tlk_bulk.trust2FK
WHERE (((tbl_main.dateReceived)<=[cutoffDate]) AND ((tlk_located.locatedTime) Is Null Or (tlk_located.locatedTime)>[cutOffDate]) AND ((tlk_unableToLocate.unableTime) Is Null Or (tlk_unableToLocate.unableTime)>[cutOffDate]) AND ((tlk_bulk.timeStamp) Is Null Or (tlk_bulk.timeStamp)>[cutOffDate]));
I would like a query that lists all dates in a range, and shows the same information for each day listed.
Hi I was wondering if anyone could shed any light on this problem. I have a new database going live in two weeks. My problem is that I keep getting a message telling me that someone else is editing the record.. which is an impossibility as it is a stand-alone copy on my hard-drive at home! How is this possible? Will this problem be solved once I have this database on the sql server and the tables has been upsized to sql? Also this database is to be used by up to 100 people is this going to be a problem?
View 2 Replies View Relatedfrom a list of records showing limited information how can i open a record on clicking on it to show all information
View 4 Replies View RelatedDear access experts,
I created form based on a query of around 7 tables, all the fields are set to
enabled and edits are allowed; however, access wont allow me to edit any of
the fields in that form! I know that the query is correct because i can flick
through the records and the fileds change.. please help:eek:
Hi,
I am trying to update prices changes for products in my inventory database, and am stumped.
I select a vendor, which then populates the product name from which I can then select the product I want to update. From here, it populates what the current prices are. I then can type the new price into the next box, but what happens is that it doesn't change that Product it changes the 1st record.
Can anyone help!
I have the employee data record... I want copy of the same record to insert in table but with different employee id and Site through forms. StaffNo is the primary key.
For example
existing record
StaffNo, Site, Name, hiring date, etc
AKA-111, 10, John, 25-10-13
new record
StaffNo, Site, Name, hiring date, etc
ALM-123, 14, John, 25-10-13
I use the first record of my table as a blank when the form is opened. Users are supposed to use a drop down to navigate to a record for updating. Some users have populated fields into my blank that i've had to go in and delete.
I'm wondering if there is a way to prevent that first record from being edited.
I have had a form working for ages. It has a main form and eight subforms at the bottom of the form. The main form can be edited in all fields.
I have taken a copy, modified the form added new fields to the main source table and updated the query that feeds the form.
Now (in the copy environment) it won't allow me to edit any of the fields. All of the form control properties are the same as the working model (in the live environment) I can run the query by itself and all is OK
There is obviously some little control that I have inadvertently changed and can't see it.
I have a form that uses a combo box to select the record to edit which then opens the edit form... I keep getting a type mismatch error. The bound column is a text column and I'm wondering if that is the problem because this works perfectly everywhere else in the database. The primary key is the SKU of the product which is alphanumeric which is why I have it set to text...
View 14 Replies View RelatedI have a form and subform. The subform is connected to the form and display all BandID's associated with that record. What i want is the ability to click on a record in the subform so that it automatically set's that record in the form for editing.
View 14 Replies View RelatedI have a form that I need to use to add new clients to a table in my database, lets call it tblClients. On this form I have a combo box which, when selected, will drop down with the first and last names of all clients in tblClients, as well as their Client ID. Once you select a client from the drop down menu, it populates all of the fields in the form with that clients info (Client ID, fname, lname, address, phone number, etc. etc.).
I need two other things on this form: one button that will save or modify whatever current record is currently pulled up, and one button that will start the process for entering a new client, so basically it would blank out all of the fields and fill the Client ID field with the current number +1.
As of right now I have the form made and the combo box works, in that I have 3 dummy clients in the tblClients and when I select each client from the combo box it will populate the fields on the form with the info. I'm using some simple VBA on the combo box such as
Me.FirstName = Me.cboBox.Column(1)
and that seems to all work, but the problem is trying to save/modify data to tblClients. The only record in the actual table that gets modified seems to be the first record. For example, if I pull up client with ID #3 and change his address or phone number, what happens when I click to save the changes it takes client ID #3 record, overrides it with client ID #1, and then client ID #3 is the same as client ID #1 except with the old information. I'm not quite sure why this is happening.
I have a data entry form that is also used for editing exsisting records, upon the opening of a record the form populates with all the data of the record apart from what is previously selected in combo boxes, so I need to find a way to re-populate those comboboxes?
View 1 Replies View RelatedIs it possible to have a 2 step confirmation process.
I have a yes/no control box to confirm that the record is OK or correct.
Is it possible to have a second process where by I can lock the record from erroneous data entry or editing? Like a "Post" in accounting.
Not = " " And InStr(1,"seat_person"," ") <> 0
I have a field into which I wish to place a person's name and I want to ensure that the field has a space in it but is not a blank field,
so
all blank - illegal
"Bob" - Illegal
"Bob Smith" - legal
the edit at the top is my attempt to code it but it isn't working.
I total novice at VBA. I am trying to code a button to modify (the last) record in a subform list and then add a new record based on values in unrelated or unbound fields on the button form.
The following code is based on the first of two YouTube tutorials (this bit on the edit) and looks like it should work. Except that my Access 2010 with Visual Basic for Aplication v7 does not recognise the type definition Database or Recordset
Code:
Private Sub ANOwner_Click()
Dim cn As Integer
Dim db As Database
Dim rs As Recordset
Set db = CurrentDb
[Code] .....
In my form I have a subform, which displays A, B, C. Then information C is displayed in textbox. User should have a possibility to modify this data in order to modify data in database.
I am able to display information C in text box based on this subform. However it is uneditable, although property of enabled is yes and locked is no.
It seems to me, that it is impossible to edit data because it is taken not directly from database but from sub form, so I make special query which takes data directly from database however I lose an event which is based on selecting proper record from subform (there is only onEnter and onExit events)