Modules & VBA :: Msgbox To Confirm Changes To Specific Control
Oct 3, 2013
I have a database in which users have the ability to search by last name...nothing fancy there. However, the users continue to forget to click the Find Client button and instead just type what name they are looking for in the LASTNAME control thus changing the record that they are currently in!!!
I am looking for a way to have a msgbox pop up any time the LASTNAME control is changed. I found the code below but this works for the entire record and I don't want them to have to click Yes every time they make change.
Code:
Private Sub Form_BeforeUpdate(Cancel As Integer)
If MsgBox("Changes have been made to this record." _
& vbCrLf & vbCrLf & "Do you want to save these changes?" _
, vbYesNo, "Changes Made...") = vbYes Then
DoCmd.Save
Else
DoCmd.RunCommand acCmdUndo
End If
End Sub
looking to have the following code run only when I have a specific value present in one of my combo boxes: e.g. cbo.status = "Approved"
Code: Private Sub Form_BeforeUpdate(Cancel As Integer) 'Provide the user with the option to save/undo 'changes made to the record in the form If MsgBox("Changes have been made to this record." _ & vbCrLf & vbCrLf & "Do you want to save these changes?" _ , vbYesNo, "Changes Made...") = vbYes Then DoCmd.Save Else DoCmd.RunCommand acCmdUndo End If End Sub
i want to get a msgbox to let the user enter the data in specific text boxes so they can't let it empty if not empty then do..this is my code
If Me.Client_Name.Value = "" Then MSG = MsgBox("You Should Enter The Client Name") ElseIf Me.Username.Value = "" Then MSG = MsgBox("You Should Enter The UserName") ElseIf Me.Address.Value = "" Then MSG = MsgBox("You Should Enter The Address")
[code]....
the msgboxes that tell the user this textbox is empty is not appearing what's wrong with my code
I have a from that has information icons that opens a separate form to support users make the right choice on a form. With each information form users are able to choose "Yes" or "No" and then it returns them back to the form they started. I am having trouble setting the focus to the control the user original left the form from.
Form A Control 1 Control 2 Control 3
Form B Information for Control 1
Form C Information for Control 2
Form D Information for Control 3
For Forms B - C I would like the form to close, open Form A and then set focus to the control that the form was providing information for.For example, if you are on Form C and you make a decision, I want Form C to close, Form A to open and focus to be set to Control 2.
Code: Private Sub image5_Click() Dim sWHERE As String Criminal_Background.Value = "Yes"
Essentially I have a form_A with several tab's and then one list control box in each of those tabs. At present if you double click on any item within the control boxes your taken to another form_B with info about that item and when you close that from down again if refreshes form_A.
Is it possible to only refresh the specific list control box that is active instead of refreshing the whole form ?
I'm using Access 2007..I have a table that contains transaction records from a bound form.When the user enters a certain type of transaction, I create a corresponding transaction in the after insert event.
Example User record - tranId = 1, tranAmt = 10, tranType = DISB, tranAssocID = 0 My record - tranId = 2, tranAmt = 10, tranType = RECV, tranAssocID = 1
When the user deletes a record, I want to delete my corresponding record using the tranAssocID ( delete * from tran_tbl where tranAssocID = (the tranID of the user's record)
Problem: 1) I don't know how to save the tranID of the users record 2) I don't know how to reference the saved tranID in the delete statement.
I'm using the before delete confirm event to try to save the users tranID to no avail.I'm using the after delete confirm to delete my record in a case statement - acDeleteOK...I tried to save the value of the ID in the form (Me.tid) to a public long variable, a hidden field on the form, and a temporary variable to no avail.
how to read a specific line in a CSV file (using VBA), to see if the phrase "There are no records available." is present.
If it is present, then I'm going to do a debug.print stating that there are no records to load - and then the script will move on to the next file. If the phrase isn't present, then I'm going to upload the file to Access, parse the information, and then upload it to a CRM. (I already have the latter portion of the code up and running....I just need to account for the first part, where I can determine if the file has data or not).
The structure of the file never changes. The first row is composed of eight column headers (Post Date, Card Number, Card Type, Auth Date, Batch Date, Reference Number, Reason, Amount) and (if) the phrase "There are no records available." is present, it will show up on the second row, in the first column (under Post Date).
I have a form I use to search for clients when I hit a command button, using surname etc. I'd like a yes no button to pop up rather than the clunky ok button route I currently have. I'm a beginner with VBA and most this I've gleaned from internet.
If there are matching results, everything is fine. If there are no matching results, I've managed to get my desired messagebox come up by using the code below in the onload event of the resulting search results form, however the yes no buttons do nothing and the results form loads blank as though no records were found.
I'd like Yes to send users to the client input form, and No to return them to the search form.
Private Sub Form_Open(Cancel As Integer) If Me.Recordset.RecordCount = 0 Then MsgBox "Do you want to add a new Client?", vbQuestion + vbYesNo, "No clients found" Select Case intanswer Case vbYes
I'm using this stardard piece of code on a button that deletes a record from a simple continuous contact form.
Code: If MsgBox("Do You Want To Delete This Record?", vbQuestion + vbYesNo + vbDefaultButton2, "Delete?") = vbYes Then DoCmd.RunCommand acCmdSelectRecord DoCmd.RunCommand acCmdDeleteRecord End If
If the form is called "CONTACTS" with a field called "Contact_Name", what code do I use to have the relevant Contact_Name appear in the MsgBox to be sure that I'm deleting the correct record ...... something like this .....
Do You Want To Delete The Record Called Paul Quinn ?
I currently use this code to trigger a not in list event, ask the user if they want to add it to the respective table, and then add it.
I'd like to be able to add the text in the combo box that triggers the event to show up in the msgbox.
Private Sub cboCategory_NotInList(NewData As String, Response As Integer) Const Message1 = "The data you have entered " & me.cbocategory.text &" is not in the current dataset." Const Message2 = "Add now?" Const Title = "Unknown entry in CATEGORY Field..." Const NL = vbCrLf & vbCrLf
So each combination has an ID. It's called the SuWID. I want to Transfer the data to a fixed Excel sheet. I wrote the following code
Dim xlApp As Object ' Excel.Application Dim xlBook As Object ' Excel.Workbook Dim xlSheet As Object ' Excel.Worksheet Dim rst As DAO.Recordset Set xlApp = CreateObject("Excel.Application") xlApp.Visible = True
[Code] ....
The only Thing what i still want to have is that, before it opens the Excel form, which works already perfectly well, that a msgbox will Show up and ask me, which SuWID do you want to see in the Excel sheet.
i have a form to enter a new client if the client is existed then a message box appear and tell me that this client is existed and his number id is ## with two buttons yes and no.if i click yes i should go to a report that contains information about that user and this report take his data from a query
new client save code --------------------- Dim MSG As Integer Dim ExistentID As Long ExistentID = Nz(DLookup("P_ID", "tbl_Personal_Information", "Full_Name = Forms!frm_New_Person!F_N"), 0) If ExistentID > 0 Then
[code]....
when i click yes the report should open with the existent id but he open a input box to ente an id and his title is tbl_personal_information.PID it's the ID field that it's named P_ID in the query
So I have a form for addresses that checks against a table of US zip codes, and throws up a warning if the City/State/Zip entered isn't found on the table. This works great. But I was wondering if there was a way to list the available combinations based on the zip code entered. I want the program to tell the user that the city is wrong, but here is a list of what it could be.Is it possible for a msgbox to list all records where a field = value?
How can I show a msgbox with the text "Update in progress! Please wait a while", when I execute the following make table querye on form load?
Code: Private Sub Form_Load() 'Turns the Access warning messages off DoCmd.SetWarnings False DoCmd.OpenQuery "q_tblUdtrk2" 'Turns the Access warning messages back on DoCmd.SetWarnings True
It's my first post to the forum, but I've browsed it a lot the past week! Lots of info here. Unfortunately I couldn't find an answer to my question, so here it is: A simple Form attached to a Table. In the detail section of the Form the Table rows are displayed (all simple textboxes) and there is a hidden button on the row. When I put the focus on a textbox in a row, I want to set visible=TRUE for the little button in that specific row. Obviously I want the button remain hidden for all other rows!
Is there a way to accomplish this, changing the properties of a control in a specific row? When I set visible=TRUE, all rows suddenly display the button.
I have a form with various text, date and combo controls. There is a button at the button that runs a macro (Close NB) at the bottom. What I'm trying to do is bring up a msgbox if certain fields are blank and not run the macro. I only want the macro to run if all the fields specified have data in them.
The fields are : cmb_cliname cmb_disease cmb_projectType cmb_ProposalStatus
The on click code is: If (Me.cmb_cliname Is Null) Then MsgBox "Please fill in the relevant details", ElseIf (Me.cmb_Disease Is Null) Then MsgBox "Please fill in the relevant details"
I have created a stock control system where i put stock that come in into a specific location i can put the same item over several locations depending of the size of the location or i can can put more than one product in a location .
The problem im having is when i do a order that say remove half of all the stock in it is split over more than one location i cant seem to get it to remove the stock from the location to show space available.
I am relatively new to Access and i am wondering why i cannot find a specific field from a table on the control source when i am and attached it to a check box.
I have created the field on the table, and now i want to attached it to the check box on a form however when i go down the list of control sources i cannot see it.
I have a form based on a query in datasheet view. What i would like is to show only those records that fulfill the truepart of iif statment, and do not show the ones that fulfill the false part.
I have the following fileds in the query
month currency 1 checkbox currency 2 checkbox sum
In the form, the control named month contains the following code:
control source: =IIf([checkbox1]=no;[month];0)
So this gives the appropriate months, but also shows the all other records with a 0 in the month field. I would like to get only the records shown that are correct with the truepart of the statement.
I am trying to allow a calendar to search through a text box with a large amount of data in which will have headings using the date so i wanted to use a calendar search. Hopefully this will be be like the find function in word where you type (or in this case select a date) then click search or next which will take you to that specific date.
Access 2010. I have a form pulling from a query to create a "To Do' list of sorts. On this form is a button to open an input form for the corresponding record (I hope). When this button is used I want it to pull certain data for that specific line from the query and input it into the new record opened by the button. I know this is possible as I use another db that does this but I have not been able to figure out how to make it work in the new db.