How to open FORM which has "inner join" in source?
Code:
...
Dim idRS As DAO.Recordset, ShowIdentity
strSQL = "INSERT INTO tblZlecenia (id_zlecenia_info, DataPrzyjecia) VALUES ('" & _
ostateczne & "', " & _
Format(Date, "#mm/dd/yyyy#") & ")"
[code]....
I am having trouble opening a datasheet form with mulitple where clauses here the VB that I have so far
Private Sub Command192_Click()
If IsNull(Me.Startdate) = True Or IsNull(Me.Enddate) = True Or Startdate = "" Or Enddate = "" Then
MsgBox "Start AND End dates are required" '
Exit Sub '
[code]....
I have a form where varying layers of information can be entered. In some cases, a user may know all information or only part. If i tie the query to the form, each field has to be populated for it to work. how do i set the query up to effectively use the information available and not require all information?
I have tried setting VBA code as follows:
If Me.Combo1 = Null Then Me.Combo1 = "*"
However, when i do this, it updates the form field with an asterick/wild card but does not include in query. yet, when i update the form fields with data (not asterisk/wild card) the query runs.
I have one form which have two multiselect listboxes. They work, but every time when I choose id_organizacija from listbox popup enter parameter value comes up.
I am already tried to put id_organizacija in [ ] but that didnt solve problem.
Code:
Set ctl = Me.lstEmployees
For Each varItem In ctl.ItemsSelected
strWhere = strWhere & ctl.ItemData(varItem) & ","
Next varItem
Set ctl = Me.lstOrganizacija
[Code] ....
The code below allows me to open a publisher document that is already merged to the current record. What I need is to allow the user to open the document according to the group they are reviewing. How to accomplish this?
For example:
IF Group = A1 OR B1 THEN OPEN AB_1.pub
IF Group = A2 OR B2 THEN OPEN AB_2.pub
IF Group = A3 OR B3 THEN OPEN AB_3.pub
Dim pubApp As Publisher.Application
Dim pubDoc As Publisher.Document
Set pubApp = New Publisher.Application
Set pubDoc = pubApp.Documents.Add.Application.Open("c:Publishe rAB_1.pub)
pubDoc.ActiveWindow.Visible = True
I was wondering if it was possible to add a parameter to the record source Query of a form depending on the value of an other field on the open event of the same form?
I was thinking to use 3 Sql statment SQL1, SQL2, SQL3, on the open event of the FrmOpen.
On Open then the RowSource of FrmOpen =SQL1
If field? = "A" Then
the RowSource of FrmOpen=SQL2
Else
the RowSource of FrmOpen=SQL3
End If
I did try but it doesn't work so I needed to know if it was possible to achieve this or not?
I have a Database with a field that holds several attachments. I want to make a command button for a form that will open the attachment window that pops up when you double click on the attachment in the table. attach_fig7(1).gif.. I'd like the above window to open when I click the command button.
View 3 Replies View RelatedI'm trying to create a report that does the following:
If the term "Other" is selected in the Time1 field, then the Time1 field will not be visible, but the field Other1 field will be visible and if the term "Other" is not selected in Time1 field, then the Time1 field will be visible and the Other1 field will not be. This is what I have for VBA code, but it is not working.
If Not IsNull(Me.Time1) Then
If Me.Time1 = "Other" Then
Me.Time1.Visible = False
Else
Me.Time1.Visible = True
[Code] ......
I made this code in excel, and I'd want to get it working in access.
Sub Satunnaisluvut()
Dim OmaAlue As Range
Dim Solu As Range
Set OmaAlue = Range("A1:A5")
For Each Solu In OmaAlue
If Solu.Value = "aa" Then
Solu.Value = "bb"
End If
Next Solu
End Sub
How do i set the wanted field? And how about the loop?
I am creating a report that has a filter based on 3 separate listboxes. The user has the option of choosing one or more filter criteria from each listbox. The trouble I am having is if the user only chooses one filter, I need to adjust my filter string. This is the code that generates the filter:
Code:
strWhereFinal = strWhere1 & "AND " & strWhere2 & "AND " & strWhere3
You can see that if strwhere1 is NULL, the string will start with "AND [ApplicationStatus] = 1" and will obviously cause a failure.
Is there a simple way to build this string based on the number of search strings that are not null?
I'm using Access 2013. I want to check duplicate data. I have a form where from insert data into table but before insertion I want check multiple criteria with form. How can I do this
Field are:
BatchID
BillNum
CIH
IH
back end form code is:
Private Sub cmdCheck_Click()
Dim criteria As String
criteria = "[BatchID]=" & Me.cboBatchID & " AND [BillNum]=" & Me.txtBillNum & " AND [CIH]=" & Me.txtCIH & " AND [IH]=" & Me.txtIH & ""
[Code] ....
Finally I'm getting this error: Run Time Error 3075 Syntax Error Missing Operator in qry Expr.
I need to get this syntax right. I have something similar that worked before to open a report but now I am using the same code structure on opening a form and I can't get it.
[prikey] is an autonumber and that has given me trouble before with the syntax. [EstimateFlagCleared] and [WarrantyFlagCleared] are Yes/No fields.
Dim maxFlag As String
Dim flagCriteriaWarranty As String
Dim flagCriteriaEstimate As String
[Code] .....
I have a form where a user enters data. One of the things the user enters is a "lot size". I need this lot size field to be checked against a query in the database to determine if the quantity is acceptable or not.
The order number in this query is in certain cases missing a leading zero, so I need to truncate this from the user entered form field.Finally I want the user to be notified if they are trying to exceed the lot size in the query.My code is as follows:
Code:
Public Function RemoveFirstChar(RemFstChar As String) As String
Dim TempString As String
TempString = RemFstChar
If Left(RemFstChar, 1) = "0" Then
If Len(RemFstChar) > 1 Then
TempString = Right(RemFstChar, Len(RemFstChar) - 1)
End If
End If
[code]....
okay, i have presented my database to my boss.
apart from the ongoing problem of trying to get a listbox and subform the same to the user, he has asked me to do something more
he wants me to be able to select from the menu, a selction that will open up a pop up form, from which notes can be made relating to the originating form
i presume the linking criteria will use the form name plus the record criteria the originating form is bound to
any help on how i go about this will be greatly appreciated
I'm trying to open a form with filtered criteria using this code:
Code:
DoCmd.OpenForm "Edit_Mission", acNormal, , "[Report_Date]=# " & Format(Me.Date, "dd/mm/yyyy") & "# And [Supporter_Name]='" & Me.Supporter & "'"
it used to work on access 2010 but now on access 2013 I get a blank form.
The following code is giving me a "Run-Time error '13' Type mismatch. I have tried isolating both criteria and they seem to be fine but joined together with "AND" they error. Workdate is a Shortdate. Flightnumber and flightID are numbers. FlightID source is a cmb within my form.
Private Sub FlightID_BeforeUpdate(Cancel As Integer)
If DCount("[WorkDate]", "Main_tbl", "[WorkDate]= #" & Me.WorkDate & "#" And "[FlightNumber] =" & Me.FlightID.Column(0)) > 0 Then
Do this....
End If
I have been trying to find a solution to why I can't get a Dlookup with multiple criteria to return the value I need.
Essentially I am trying to use an Order Number to find the item number which is contained within another table. However the order number has multiple lines (suffixes) which alter the item number. Therefore I am trying to have the item number be populated by the correct 'combination' of Order Number and line ("suffix").
I have managed to use the Dlookup in the after update of each box of the form separately and they retrieve values in the table correctly:
Afterupdate of main order number:
Code:
Private Sub OrderNumbertxt_AfterUpdate()
ItemNumbertxt = DLookup("item", "dbo_job", "[job] = '" & Forms![**INPUT]![OrderNumbertxt] & "'")
End Sub
Afterupdate of suffix:
Code:
Private Sub SuffixTxt_AfterUpdate()
ItemNumbertxt = DLookup("item", "dbo_job", "[suffix] = Forms![**INPUT]![SuffixTxt]")
End Sub
However when I combine them as follows in the afterupdate of the Suffix box I receive a "Run-time error '13': Type mismatch"
Code:
Private Sub SuffixTxt_AfterUpdate()
ItemNumbertxt = DLookup("item", "dbo_job", ("[suffix] = Forms![**INPUT]![SuffixTxt]") And ("[job] = '" & Forms![**INPUT]![OrderNumbertxt] & "'"))
End Sub
I think the reason is something to do with some being numbers and some being a combination of text and numbers (based on the replies of other topics), but have been trying to modify these slightly and can't get it to work still.
Also the Order Number is a combination of letters and numbers (normally in the form of AB12345678), the suffix is just a number between 0-9 and the Item number it finds is a combination of numbers and letters.
What I want to do is set the criteria of a query to the value on a form if the form is open, and set it to a different value if the form is closed. I tried using a function on the OnLoad event of the form to set a variable called IsOpen to 1 if the form is open, and reset that variable to 0 when the form closes, but when I tried using the variable in an IIF statement in the query criteria, I got a "Its too complex" error.
Here's what I really want to do. I have a very complex form with multiple tabs and subforms. The subforms populate based on a query of what is selected and loaded into a textbox control on the first tab of the form. The first tab has a subform that is based on the main table. Rather than recreate that form, I want to copy it and change the rowsource on the first tab to a subset of the main table, and tell the query to use the textbox on the new form so I don't have to go and replicate all the other subforms. Is there a way to do that or am I just screwed?
Staff are monitored to make sure they are keeping up to date with our customers. A customer can have multiple projects going through the factory at any one time. Each customer has a record per project and a 'general' record. Ideally we would like our staff to be able to move the 'general' record when they update a project record as opposed to either having to find and then update the general record after, or forgetting and calling the customer again 2 days later!
Including a msgbox for the EnqNum seems to show the general record correctly, however being new to access I am unsure if I have the update part correct.
Code:
If Me.chkMoveGen.Value = "-1" Then
Dim EnqNum As Integer
EnqNum = DLookup("[e_id]", "tblEnquiries", "[c_id]=" & Me.txtc_id & " and [e_status] = " & "13")
DoCmd.RunSQL "UPDATE tblEnquiries " & _
" SET e_date_due=#" & Format(Me.txte_date_due, "MM/DD/YYYY") & "#" & _
" WHERE e_id= EnqNum"
I have this
Code:
If Not IsNull(strCount = DLookup("[Number_Of_Records]", "All_Booked_Callbacks ", "[CallBack_Date] =#" & Me.CB_DAte.Value & "#" _
& " And [CallBack_Time] = #" & Me.CB_Time.Value & "#")) Then strCount = DLookup("[Number_Of_Records]", "All_Booked_Callbacks ", "[CallBack_Date] =#" & Me.CB_DAte.Value & "#" _
& " And [CallBack_Time] = #" & Me.CB_Time.Value & "#") Else strCount = "0"
All_Booked_Callbacks is a query which has a date and time columns and count of callbacks for that day and time, this always returns 0
Private Sub btncard_Click()
Dim stLinkCriteria As String
DoCmd.RunCommand acCmdSaveRecord
stLinkCriteria = "[jobref]=" & "'" & Me![jobref] & "'"
DoCmd.Close
DoCmd.OpenForm "k_job_card", , , stLinkCriteria
End Sub
this button code opens the k_job_card form.
the form opens and says 'Record 1 of 1, (Filtered)
i have a control on the form that opens.. and i am simply trying to assign a default value to that control..
it is a textbox.. for my jobtype field (text datatype)..
is there any particular reason why i cannot assign a default value to a control if it has been placed on a form that has been opened using a form filter?
this is how the Form Data tab is set at the moment..
MS Access 2010 accdb - Using TempVars open forms either for New Record or Edit Record.
Two sets of forms - One set works perfect but the other will not accept the criteria for New Record
MsgBox checks confirm the Variables are still valid in the 2nd form Open Event yet the If Then does not work.
Just before the If Then, an invalid use of Null message appears.
I have a small problem with dlookup multiple criteria. Vba code looks like this:
Code:
Label34.Caption = DLookup("[Spent_Hours]", "249_1_CHours", "[Date_Added]= " & Me.Text27 & " And [Shift] = '" & Me.Text29 & "'")
This gives following error:
Syntax error in number in query expression '[Date_Added]=4.02.2015 And [Shift] = '2'.
[Shift] column is a numeric field.
I have a form that has seven unbound fields named txtCityCriteria1 through txtCityCriteria7
The idea is to have the use type in up to seven cities and have this applied to the criteria of the city field in a query. This query is the datasource for a report. I know how to do a single text ....
[Forms]![frm_OpenReport]![txtCityCriteria1]
in the criteria row would do the job. But how can I do seven?
Oh and if all are left blank i need it to open another form that informs them of their mistake.
I have looked through these forums and have found several possible solutions but I can not get any to work. Any assistance would be greatly appreciated. Take it easy on me I am relatively new to this code thing. Used to do everything in macros.
I have 2 tables, Test Cases, Test Case Details. I have a tabbed form to display the data. How do I open the form and retreive the data from both tables? Tables are related by ID.
View 2 Replies View RelatedIs there a way to allow Access to open a second (or thrid...) copy of a form? We need this so we can visually compare the contents for record one with the contents of record two.
Thanks,
David