Modules & VBA :: Naming Range To Export Data To Access Table?

Dec 15, 2014

I am trying to write code in an excel worksheet to try to export excel data to a table in access.

The range in which the data is situated in excel varies. So the range address varies with the data. After a lot of searching I wrote the following code which works for a range which is fixed. The code is the following:

Dim acc As New Access.Application
Range(Range("b22"), Range("b22").End(xlDown)).Select
ActiveWorkbook.Names.Add Name:="ghazla", RefersTo:=Selection
acc.OpenCurrentDatabase "D:PayRollFactoryJasminePayroll.accdb"
acc.DoCmd.TransferSpreadsheet _

[Code] .....

As one can see from the first two lines of code I am trying to first delineate the range and then to name it. The intent is to name the range "ghazla" and so to cater for the fact that the extent of data varies.

The code works with the fixed range ="Sheet2$B140". However what I need to do is to adjust the code so that I can insert "ghazla" as the range name so that this can vary.

View Replies


ADVERTISEMENT

Modules & VBA :: Excel Export Naming Convention

Jun 8, 2015

I would like to add the "Month" of the information queried to my file name at export if possible. I included my current code and an example of how I would like the title to read.

DoCmd.TransferSpreadsheet acExport, 10, "tblStarzIncentivePayoutExport", "C:StarzExportsIncentive Payouts" & " " & "Ran" & " " & Format(Date, "mm-dd-yyyy")

I would like the file to be named:

Incentive Payouts "Month out of the date ran in the query" Ran 06/08/2015

Is it possible to do?

View 1 Replies View Related

Modules & VBA :: Unable To Export Recordset Data To Multiple Excel Range In Same Sheet

Feb 14, 2015

With below codes I am able to export recordset data to specified excel range if recordset count is 25. But I am unable to export the data greater than 25 to 2 specified range.

View 7 Replies View Related

Modules & VBA :: Export Data From A Table In Access To Excel

Apr 16, 2015

i have the following code and it runs without error but when i want to open excel file, i have the following message and i can't open it.

DoCmd.TransferSpreadsheet acExport, acSpreadsheetTypeExcel12, "tbl_userinformation", "G:Rasteh MonaName.xlsx", True

View 3 Replies View Related

Export Data By Selecting Date Range

Oct 27, 2013

I would like to create a excel file to let the user to input the following column.

Date No. of success No. of failure
==== ============ ==============
" " "
" " "
" " "

I would like to have a function that can allow the user to select the date range and its total no. of success and no. of failure

For example , the user select from 31-03-2001 to 31-12-2012 , then output the report which show the total no. of success and no. of failure in this date range , is there existing tamplate that I can use ? if no , what is the simplier way to do it ?

if the data is very large , I want to create a access db to store it , how to do it ?

View 5 Replies View Related

Modules & VBA :: Naming New Archive Table

Jan 8, 2014

I have a Database in which I would like to archive data once it is now longer actively being used. I have VBA code that does everything i need it to, however I would like to name the new archive table related to the dates in the data being archived. Below is the code I am using to archive and delete the information from the main table.

Code:
Dim strSQLCreate As String
Dim strSQLDelete As String
Dim strArchiveTableName As String

[Code].....

I know it will be in the "strArchiveTableName" variable, I am just not sure how to pull the dates out of the data being moved. The TestData table holds a date and time for each test, and the earliest and latest dates is what i want to append to the table name.

For example: Currently "tblTestData_A102Archive"What I want "tblTestData_A102_1/1/2012-1/1/2013"

View 3 Replies View Related

Reports :: Export Data By Selecting Date Range

Oct 27, 2013

I would like to create a excel file to let the user to input the following column.

Date No. of success No. of failure
==== ============ ==============
" " "
" " "
" " "

I would like to have a function that can allow the user to select the date range and its total no. of success and no. of failure. For example , the user select from 31-03-2001 to 31-12-2012 , then output the report which show the total no. of success and no. of failure in this date range , is there existing tamplate that I can use ? if no , what is the simplier way to do it ?

If the data is very large , I want to create a access db to store it, how to do it ?

View 4 Replies View Related

Modules & VBA :: Subtotal Data Access To Excel - Range Class Failed

Jun 6, 2014

I'm trying to subtotal data in an excel file but I am getting a subtotal method of Range class failed in the red text below. I have been trying to get this to work with no success.

Code:

Public Function SUMMARY()
Dim xlApp As Object
Set xlApp = CreateObject("Excel.Application")
With xlApp
Dim wb As Object

[Code] .....

View 3 Replies View Related

Modules & VBA :: Word Naming And Emailing Attach From Access 10?

Apr 21, 2015

I need to create a word file (it needs to be word) based on template (not a very complicated template) max 1 to 1 and 1/2 pages long.

the word doc needs to be named from the recordset but for now assume 12345.doc and the next one will be 12346.doc etc (I have a unique number system - available from tables /query .

i can either make the word doc in code or use a template (template would be better) recordset could have 20-30 in it each time i run it - but to be run every week

second half is how to email this out. i had in mind a email system

email to . test@testhotmail.xyz
file attach = this folder where the docs are store and attach 12345

in a loop

so either

create word file - email word file in a loop each time or create all the word files and then send them individual

View 4 Replies View Related

Modules & VBA :: Export Data To Excel Then Link That Workbook Back To MS Access

Apr 17, 2014

I have a question about the best way to go about linking an excel workbook to an ms access table? I have researched hyperlinks and attachments and ole objects and I am not sure what is the best option. I believe hyperlinks will be best, because the attachments will bloat the database, but I am not sure how to go about doing that in vba? My process is such:

1)Users enter project information
2)Users enter the sample information for each project
3)The project and sample information is combined by a query
4)The user clicks a button to print forms, which runs the query and opens an excel workbook template.
5)The data is exported to a specific sheet in the workbook
6)Using vba in excel, the data is used to populate cells in different sheets depending on critera.

After all of this is accomplished, I need the user to SAVE AS the excel workbook and it needs to be "attached" to the ms access 'project' table. I am not sure what is the best way to link this back to the database. I would like to automate it with vba if possible.

View 1 Replies View Related

Modules & VBA :: Export Data From Table To Excel Showing Only Ticked Fields

Apr 24, 2014

My database only has one table of data so it's not complicated.I would like to create a form that can create customisable Excel exports of the data based on set conditions and exporting only select fields. URL...I have one table of data (tblCustomers) which contains all of the fields in the box above.

I would like export the data from the table to excel showing only the fields that are ticked in the box (frmCustomReport).The check boxes are named chk then whatever the field name is eg. chkLocation, chkStatus. The labels are the names of the fields in tblCustomers. Is there a way to do this in SQL or VBA?

View 3 Replies View Related

Modules & VBA :: Export Access Table To Excel Depending On Name

Sep 15, 2014

I have a table (tbloutput) which has details of customers and which staff they have been contacted by.

What i want to do is, export the details from this table into an excel sheet using a template that i have set.

What i want to do is create multiple excel outputs using this template depending on the name of the staff. So each staff will have a seperate workbook which was created using that template. And i also want the new workbook to be named for that staff member.

So in short

Table exported to excel workbook and excel workbook named : Blabla staffname.xlsm

View 1 Replies View Related

Export Table Data Into An Excel SpreadSheet (VBA, ACCESS)

Mar 3, 2008

I have an export function below that will export my table "Test" to an Excel Spreadsheet.

However I want it so i can choose where that data in the "Test" table will go in the Excel Spreadsheet i.e. I want to export all the data in to Cell "B2" of the SpreadSheet - at the moment it will export all the data into "A1"

Any help or ideas?


Private Sub Command3_Click()

'Export function
'EXPORTS TABLE IN ACCESS DATABASE TO EXCEL
'REFERENCE TO DAO IS REQUIRED

Dim strExcelFile As String
Dim strWorksheet As String
Dim strDB As String
Dim strTable As String
Dim objDB As Database

'Change Based on your needs, or use
'as parameters to the sub
strExcelFile = "E:CSCLDMSLDMSDatabaseAppLDMS_Spec.xls"
strWorksheet = "WorkSheet1"
strDB = "E:CSCLDMSLDMSDatabaseAppLDMS_IFF_APP.mdb"
strTable = "Test"

Set objDB = OpenDatabase(strDB)

'If excel file already exists, you can delete it here
If Dir(strExcelFile) <> "" Then Kill strExcelFile

objDB.Execute _
"SELECT * INTO [Excel 8.0;DATABASE=" & strExcelFile & _
"].[" & strWorksheet & "] FROM " & "[" & strTable & "]"
objDB.Close
Set objDB = Nothing




End Sub

View 2 Replies View Related

Modules & VBA :: Export A Table From Access 2010 Into Existing Multiple Tab

Sep 25, 2014

I am trying to export a table from Access 2010 into an existing multiple tab excel 2010 spreadsheet.I want it to overwrite the "data staging" tab each time.I have it adding the tab into the existing spreadsheet but it names it "data_staging" however if I run this a second time I get excel found unreadable content in 'data staging' Do you want to recover the contents of this workbook? if you trust the source of this workbook click yes.

Code I am using

'export to existing spreadsheet data staging
Private Sub Command5_Click()
DoCmd.TransferSpreadsheet acExport, 10, "Phx Data Staging", "F:My DocumentsWorkSGN est est data staging.xlsx", False, "data staging"
MsgBox ("Completed")

View 1 Replies View Related

Modules & VBA :: How To Get Sum Of Range Of Data

Oct 4, 2013

I am trying to simply find the sum of a range of data...I have tried putting the range into a the formula, and also creating aliases for the cells but it either doesn't work or I keep getting a name error in excel and I just can't seem to get the right code:

The range I am trying to sum is:
Range(Range("B2"), Range("B2").End(xlDown)).Select

And I can find the cell that I want the sum to go into by:
Range("B2").End(xlDown).Offset(1, 0).Select

As I said I have tried a few things but just get this right. Should I be using Value, Formula or FormulaR1C1?

View 5 Replies View Related

Forms :: Make A Button To Search Range Of Columns In Data Table With Data Type Yes / No

Apr 15, 2013

what I want to do is make a button to search range of columns in data table with data type Yes/no and display the results if the value is yes

View 9 Replies View Related

Modules & VBA :: Copy Data In Sheet1 Using Sheet 2 And Access Table Data?

Aug 5, 2014

I am using Excel/VBA as a frontend and Access backend. The sheet2 stores the queue name and Queue number. We have to update the sheet1 from column L to column O by looking for the values from the Access table for the date selected from the comboboxes. Now In sheet 2 , it says Queue number and in actual in access table it is the combination of Type & Type1 & Type2. So we have to look for Type & Type1 & Type2 in the table and find out total Batches ,Total Envelopes,Total documents and total pages and then store the values in the ExcelSheet1 from column L to column O.

The following formulas will be used in the select statment:

Total Batches = count(BatchNo) for date selected
Total Envelopes=sum(Envelopes) for date selected
Total Documents=sum(Cases) for date selected
Total Pages=sum(Pages) for date selected

View 14 Replies View Related

Modules & VBA :: Naming A File - SOW Number

Oct 23, 2013

I'm currently working with Access 2007 building a way to create PODs to clients. I have most everything laid out, one problem I can't seem to get around is naming the file the SOW #. Below is the code:

Function Run_all_PODs_01()
Dim myPath As String
Dim name As Object

DoCmd.OpenQuery "Q5 SOW bill requested data points all", acViewNormal, acEdit
DoCmd.OpenQuery "Q5 SOW bill requested All 01", acViewNormal, acEdit

[Code] ...

I can't seem to get the name to equal the SOW number.

The table that I'm trying to reference is "SOW bill requested data points" it is a basic table one row with a column header as SOW #. I'm not sure how to tell it name the file that data point in the column.

View 4 Replies View Related

Modules & VBA :: Connect To Excel And Delete Data From A Range On Specific Sheet

Feb 28, 2014

I am trying to connect to excel from Access database. Once I make the connection I want to delete data from a range on a specific sheet. There are 4 columns on the spreadsheet but i wouldn't know how many rows. So for example, A150... but I may not know what the last row is. How would I be able to delete data from a range of columns to the last row?

View 4 Replies View Related

Modules & VBA :: Automatic Data Export To XML

Sep 22, 2014

I have back-end on LINUX, is there any possibilities to automatic export data to *xml? e.g. every 5 min. Maybe some code in vba which can be connected to system timer?

View 3 Replies View Related

Modules & VBA :: Export Data By Date

Sep 17, 2013

I want to Export data by date.

A Inputbox will shows up and then ask for a Special date.

I have a table which has for one ID always a Special date.

Many ID can have the same Special date. So i want to Export all with the same Special date.

I've created the following code. When i enter the date, it doesn't Export anything.

Code:
Dim xlApp As Object 'Excel.Application
Dim xlBook As Object 'Excel.Workbook
Dim xlSheet As Object 'Excel.Worksheet
Dim rst As DAO.Recordset, Rechnungsdatum_Finanzamt As Long, tmpStr As String

[Code] .......

View 14 Replies View Related

Modules & VBA :: Output Report To Excel With Naming

Aug 19, 2013

Been hunting a round looking for some code that will output my access report to excel but more inportantly add a unique field from the report to the name of the file. example would be [FileName] & [ReferenceNo].xls.

View 2 Replies View Related

Modules & VBA :: Export Data In Listbox To Excel

Jun 18, 2014

I have a Listbox named List5 and a search textbox named txtProperty and a table name sms , after i search in textbox the results in listbox . i would link to inport the results in listbox to excel but the code i have export the whole table to excel .

here is my code

''''''''*''''''''*''''''''*''''''''*''''''''*''''' '''*''''''''*''''''''*'
''''''''*''''''''*'''''''' BUTTON 3 ''''''''*''''''''*''''''''*'''''''
''' EXPORT THE LIST TO EXCEL AS List5.XLS ''''''''*''''''''*''
''''''''*''''''''*''''''''*''''''''*''''''''*''''' '''*''''''''*''''''''*'
''''''''*''''''''*''''''''*''''''''*''''''''*''''' '''*''''''''*''''''''*'

Dim outputFileName As String
Dim oXL As Object
Dim oExcel As Object
Dim sFullPath As String
Dim sPath As String
outputFileName = CurrentProject.Path & "List5.xls"

[Code] ....

View 3 Replies View Related

Modules & VBA :: Importing Text Files Into Access Within Date Range

Mar 17, 2014

I want a string of code that allows me to import a series of delimited text files into access using VBA. I have the first bit of code down:

Code:
DoCmd.TransferText acImportDelim, deltxtimptbl, "Delivery(local)", "msfs3109data1shareeveryoneprorep ranhistDelivery" & currentdate & ".txt"

The text files hold data for a specific days work. Each day has its own text file. I would like to be able to import the text files within a specific date range, specified by the user. Below is the total code i have for my form button:

rivate Sub Command0_Click()
Dim startdate As String
Dim enddate As String
Dim currentdatex
Dim count As Integer
count = 0

[Code] .....

View 12 Replies View Related

Modules & VBA :: Check For Documents With Specific Naming Structure

Apr 30, 2014

I want to hit a button and then it scans for a file on a server and return with a message box saying if it exists or not.

I want it so when I am on a Specific record it will search for certain requirements.

All the file names are pdf files with the same naming structure

SIT yy m(m) dd Last Name Unique Identifier
Example:
SIT 14 5 21 Smith ABCD1234567
SIT 14 10 21 Smith ABCD1234567

So I hit the button it sweeps the file path and looks for documents with this naming structure.

Last Name and Unique Identifier are fields within the db.

Last Name = txtLName

Unique Identifier = txtUniqIden

So far I have the following:

Code:
Dim strDirName As String
Dim strDirPath As String
Dim strDirName As String
Dim strDirPath As String

[Code] ....

So Far it works and I used the actual name of the items an it finds them but I need to up each record.

I have no clue how to begin with the strDirName. How to get it to scan the file name in a specific format.

View 3 Replies View Related

Modules & VBA :: How To Manipulate Data Export In Rows To Become In Columns

Oct 14, 2013

The key field is the specimen number and specimen type. Currently for every antibiotic there is a row with its result. My output is 3 complete worksheets so a lot of data. I need to create a database with one row per specimen number/type to include whether it is S/R/or I for each type of antibiotic. The example probably makes more sense. but I'm assuming that 65000 rows * 3 sheet can then be reduced to around 18,000 rows.

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved