Modules & VBA :: No Current Record - Unknown Source
Sep 11, 2013
I am receiving the No Current Record message, but have been unable to determine the code that generates it. The database is a system that creates tasks and assigns them to users. In the header section of the Tasks form are several controls they can use to select Active or Completed tasks, refresh the data, sort by columns, etc. There are also three other forms (not subforms) that lay on top of the Tasks form to provide additional detail about the current task.
If they "complete" all their active tasks and click Refresh, all the tasks disappear, as they should, and everything works fine. If they then try to close the form, or click any control in the Tasks header, the No Current Record message pops up. I've put debug stops in every conceivable location, but the message appears to occur before any code is activated.
I did find that I can make the message not occur by commenting out the code that synchronizes one of the associated forms (Notes), but I still don't know what is triggering the message. Debug stops in Notes yield no results either, and clicking a control in the header of Tasks shouldn't affect Notes.
One of the common denominators between them is the URN which is auto-populated as it is an auto number field. My issue is that when I want to add a new record to the payments table using the forms (I can get to the payments form via the register form), I want to be able to identify the record that I am currently viewing within the register and auto populate the URN field with the same number. This is what I have done so far,
Option Compare Database Option Explicit Private Sub AttachPaymentDetails() Call PerformInsert("tblFinancialBudget", "frmFinancialBudget") End Sub
I'm trying to make a form that shows what the last record was next to the empty space where you enter a new record.
This is so the user knows that what they are entering is roughly in line with what has come before.
So for example if I was recording temperature every May, I would like a form that has a field called temperature and next to that field I would like to see last year's temperature.
I'm new to Access and VB but I managed to write parts of what I want access to do.By tweaking a code I found on the internet, I managed to write a small Subroutine that allows the user to click on one of the fields of a record in a report and then Access opens the form on that specific record.*My code goes something like this:*
Code:
Private Sub Edit_Click() * Dim strWhere As String * Dim DocName As String * DocName = "FormName" * strWhere = "[Field Name]='" & Field & "'" * DoCmd.OpenForm DocName, acNormal, , strWhere End Sub
Now I want to get the name of the Table where the record exists.So, let's say when I click on the "Field" it gets the name of the table where the record with that field exists and sets it in a variable.OR even better would be, get the name of the Form where that record exists but I guess that's a little more complicated since the record is directly linked to the table...*
In my Access adp, when I open a certain form (frmVertebrates), the databinding occurs in the Load event for the form, for various reasons. I have not specified any datasource in the form's design view.
Databinding for frmVertebrates:
Code: Me.Form.RecordSource = "select * from dbo.vertebrates where catalogID=3"
This works great when just opening the form. However, when opening with a filter from a button on another form it won't work, the form displays all records.
Button code:
DoCmd.OpenForm frmVertebrates, , , "vertID=123"
Obviously, this makes sense, since the record source is explicitly set in the Load event.
Is there a way to capture the filter "vertID=123" so it can be added to the Form.RecordSource sql?
When breaking in the Load-code and watching the 'form' variable, I can't spot the filter condition anywhere...
I currently have this set as the forms default recordsource (which works just fine):
Code: SELECT TOP 5 tblUsers_Phone_Book.EMAIL_ADDRESS, weightedDL('me@mine.com',[EMAIL_ADDRESS]) AS Expr1
And I have this vba to dynamically switch around that email address.
Code: Private Sub Form_Load() Dim intPos As Integer Dim strControlName As String Dim strValue As String Dim sSQL As String If Len(Me.OpenArgs) > 0 Then ' Position of the pipe
[Code] ....
If I msgbox the sSQL - it shows identical to the default recordsource but I get the error:
The error message I get is:
Run-Time error '2580' The record source 'SELECT TOP 5 tblUsers_Phone_Book.EMAIL_ADDRESS, weightedDL('me@mine.com',[EMAIL_ADDRESS]) AS Expr1' specified on this form or report does not exist.
I tried copying the exact working default sql into the vba and get the same result.
I'm changing a record source on a form when the user clicks a "save" button.
I'm doing this to store a value from the current form in a table that is not part of the default form query.
This works fine.
I have a separate button on my form called "Home", when the user clicks this button it requerys the current form which triggers the before update event to run, this in turn brings up a message box which asks the user if they want to save or not. If they click yes then it runs the SaveButton click() code.
For some reason when the user presses the save button and then exits, everything works but if a user presses the “home” button which triggers the save button then it brings up the “2107 The Value you entered doesn’t meet the validation rule defined for the field or control.” Runtime error and stops on the change recordsource command.
Why triggering the same code directly from a button or indirectly from a before update event has two different outcomes.
I have a list box that my client goes through with vbKeyDown and vbKeyUp. When he finds the correct record he wants to do vbKeyReturn and capture the checktype code and description and have them placed in a check which is another form that is open. The following code does not work:
Private Sub List3_KeyDown(KeyCode as integer, Shift as Integer) If KeyCode = vbKeyReturn Then Forms!frmChecks![TRA{CODING = Me.CurrentRecord.Column(1) Forms!frmChecks![TRA:CODEDESC] = Me.CurrentRecord.column(2) DoCmd.Close adForm, "frmCheckType", acSaveNo KeyCode = 0 End If
I'm using: DoCmd.OutputTo acOutputForm, "Frm_EL_PL_Bulk_Send", acFormatPDF, outputFileName1...To save a form as a PDF. The issue is, it saves all the records in that set in continuous form, and I'm trying to get it to only save the record its on.
I have a form with a subform. In the form's On Current event I have the subform's visible property set to false. There is a button that when clicked sets the subform's visible property to true. I want the subform to go to the first control in a new record which is a combo box. the subform is a multiple items form. I have tried the GoToControl in the subforms OnCurrent event, but it is not working. I get an error saying the database cant find a third form.
While the validation runs a boolean keeps track of validated input and errored input.
After validation the validated input is dumped in the table.
Now what I want is de saving the errored record from "rsSQLIn" to be copied to a new .csv file.
The problem I have is that I cant seem to get the current record from the recordset "rsSQLIn". How do I reference this? I need the complete set of 24 fields being the same within "rsSQLIn"
I get this error when I delete more than one record consecutively.
Here is my delete code;
Private Sub Komut98_Click() Dim blnLast As Boolean 'MsgBox call must return the value in order to be checked. 'If user says no then cancelling is not required. It is only required ' that the deletion command is not invoked.
i want to crate a continuous form where i can add a button to export all of the attachments in that current record, i can create a folder and name it same as the selected record but how I can export all of the attachments in that record
Code: Dim strUserName As String Dim Location As String strUserName = Environ("UserName") Location = "C:Documents and Settings" & strUserName & "Desktop" & Me.ID If Dir(Location, vbDirectory) = "" Then MkDir Location
Is there a way to print the current record from a dao.recordset?
This is an exercise to compare data content.
I have a table with 30 fields and thousands of rows (rs1).
I'm comparing it with a copy of the same table (rs2) that has the same number of fields and the same rows and almost the same content.
I can loop through the recordsets and get the cursor to stop on a field whose values don't match, lets say on row #x
and the programmed message will say something like:
"ROW: 699 Field: [RequestStatus] rs1.VALUE: Closed, DOES NOT MATCH rs2.Value: VOID, in the comparison recordset"Then I'd like to print the entire Row, Row #699.
I thought I could use rs1.getrows but I'm not sure how to make that work.
Its been a few years since I used Access, and despite searches I cant find what I'm looking for. I have a VERY simple form, with only one record on it - "address". I have some print buttons which will print that address to different size labels, and some navigation items, but only one actual record - which is "address" (in the table, this address is a MEMO)
I would like to have a command button that when clicked copies the current record, and opens an existing Excel Spreadsheet and pastes that address into (for example) cell C8
Can it be done easily? Is there a DoCmd.TransferSpreadsheet kind of secnario that works with current record only?
I was creating a program using ms access. consist of 2 table of database called employee and userlevel.. in employee table have ID, name, username, password,userlevel, and others related employee profile.. and in userlevel table, it consist of admin level and normal user level.. Userlevel table allow to differenciate admin and normal user(employee) .. in my program each employee having their own loginID and pass to access their own data.. the problem with my program now is displaying the data that belong to the logged in employee. its mean that it only show the data that owned by currently user that logged in..
I'm looking to add a button to my Customers form which will mailmerge the current record to a Word template and then save the Word doc as a new file (Ideally the customer's name).
I've looked at the Super Easy Mailmerge but I can't work out how to implement it without all of the variables (selecting documents etc.).
The files will all be saved to one location (C:CustomersExports) and this won't change.
This is also the location of the mailmerge template (C:CustomersExportsTemplate.docx)
I want subtrack a value on the current record from the previous record and display the result in text box in subform datasheet. This is done during data entry. The calculation works most of the time and randomly it returns the wrong value. I have the code in an after update event after I enter a number. Here is what my code looks like:
What I'm try to do is attach any files from the attachment field from the current open record to email i have some code i have manage to get files from the open record to save to destination /temp folder to work so outlook can attach the files but outlook is not opening or putting them in to email also have problem's that i have highlighted in the code in red.
Code: Private Sub cmdEmail2_Click() Dim outlookApp As Outlook.Application Dim outlookNamespace As NameSpace Dim objMailItem As MailItem Dim objFolder As MAPIFolder Dim strAttachementPath As String
I have an unbound form with three tabs. On each tab there is a sub form. Each tab is a search form and each sub is a results returned. I have made everything unbound and set the sub form recordsource and its controls control souce on afterupdate of the main form search criteria. Works fine except for after some use the db decides the sub forms are not unbound and sets the record source and control sources.
I have a form that when a user fills out the information and select a submit button. It brings up that record in reports in print preview for them to print. The issue i am having when the user enter the information, the report does not show any data until i refresh it. I tried include me.refresh,etc. No luck. I attached the code to make things simpler.
Private Sub Form_BeforeUpdate(Cancel As Integer) If Me.Dirty Then If MsgBox("Do you want to Submit this Contract Form? Clicking No will DELETE ALL ENTERIES,and Log You Off", vbYesNo, "CONTRACT FORM") = vbNo Then Me.Undo Cancel = True Else If MsgBox("PRINT FORM", vbOKOnly, "CONTRACT PRINT") = vbOK Then DoCmd.OpenReport "rpt_Contracts_Main", acViewReport, , "[CONTRACT_ID]=" & Me!CONTRACT_ID End If End If End If End Sub
The reports comes up, but i have to manually refresh it to show the data that was enter.
I have 2 form, form1 and form 2 (picture attached)
In Form 1 (main form) there are "reference" field with key pressed event then call form 2 (list of reference that user can choose)
In form 2 the problem is, when "enter" key pressed (keypress event), selection will move to next record so the data that transferred to form 1 is wrong (next record)
The question is : how to save current record in form 2 before enter and send the data to form 1
I would like to do a loop but never done one before, basically i want to copy the current record by the number of times specified in a quantity field
So if the quantity field in the record says 5 then copy that record 5 times (I have managed to create the copy and paste code but dont know how to make it do it 5 times
I have VBA code for a Print Preview button on the main form that previews the current record in a separate Report using this code:
Code: Private Sub cmdPrintRecord_Click() Dim strWhere As String
If Me.Dirty Then 'Save any edits. Me.Dirty = False End If
[code]....
I use this Print Preview code on a Button in the Form Header. The Main form lists head of household information. I also have a tabbed control with three tabs that have SubForms for Address, Children and Contact details. The problem I have is that if any of the subforms are left blank I get a Run-Time Error '3021': No Current Record. If I Debug (press the button), it takes me straight to this line:
highlighted in Yellow.Anyone on my database must have an address, should have contact details and could have children. If any one of these is blank then the print preview will not work.I would like to know how to stop this error happening for blank records in my subforms.
I need a way to dynamically store a particular value in "field_2" of the CURRENT record depending on whether or not the value of "field_1" of the CURRENT record is identical to the value of "field_1" of the PREVIOUS record within the same table. The table is sorted on "field_1".
So, if the value of "field_1" in the CURRENT record is "ABC" and the value of "field_1" in the PREVIOUS record is also "ABC", then store a value of "PPP" in "field_2" of the current record. IF on the other hand, the value of "field_1" in the CURRENT record is "ABC" and the value of "field_1" in the PREVIOUS record is "XYZ", then store a value of "WWW" in "field_2" of the current record.
I have a report that will use these results to count only the number of records that have a "WWW" in "field_2".
Is this doable, maybe in a query somehow?
I should add that whatever the solution, it needs to be compatible with Access 2000.
I'm struggling with a query to evaluate current and prior record data. I have a query producing 5000 records. I need to group records by Case ID and compare current date record to previous date record to determine if a team and worker name has changed during the year. I need to count how many times a cases is transferred to and out of a particular team from the beggining of the year. i.e., On 1/1/2014-Team1 has an inventory of 500 cases.
During the month 25 cases are transferred into Team1 and 15 cases are transferred out of Team1. So on 2/1/2014 Team1 begins with an inventory of 510 cases. Throughout the year cases come and go from and to Team1 each month so need to figure out how to create a query to count each change. See attachment displaying how the data is listed and how I invision it to work with the In/out column counts.
Specifically, at the begginig of the year (1/1/14) for case ID 1003 you can see it belongs to Mary in Team1 for January and February. Then in March the case is transferred out and went to Joe in Team 3. So for Mary a "-1" is recorded as a negative count for that Case ID. If later in the year the case is transferred back to Mary a "+1" would be recorded. Respectively evaluated for each of the 5000 records to get a total count for each of the teams by Case ID throughout the year.
I've started with DLookup, tried comparing current month to previous month using DMax. It works as long as I only select one case ID used in a separate query but if I use the whole subset (5000 records) it fails. I can't figure out how to group each set of case IDs and then apply the query.
