I am just in the middle of writting a little bit of code that will go through each record in a query and export it into a word table. It's in the early stages but all was working yesterday. I've come to it this morning and ran it and now I get an error message;Run Time error 91: Object Variable or With Block Variable not set.
Code:
Private Sub Command15_Click()
Dim MyDb As DAO.Database
Dim rsLogin As DAO.Recordset
Dim ObjHead As String
Set MyDb = CurrentDb()
Set rsLogin = MyDb.OpenRecordset("query here")
Error 91 - Object variable or With block variable not set
I am getting this error telling me that an object variable is not set.
I know which variable it is but when I step through the debugger it sets the variable and all is fine? Issue is that public variable of a class is not getting set when the VBA Editor is not open?
This code runs fine the FIRST time, however trows up a message the SECOND time it is run.
The error is on the line ".Range"
I am trying to sort records which have been exported to Excel.
Dim LR As Integer LR = 5 Set xlApp = CreateObject("Excel.Application") xlApp.Visible = True Set wbRef = xlApp.Workbooks.Add With wbRef
wbRef.Activate .Worksheets("Sheet1").Activate With ActiveSheet .Range("A2", .Cells(LR, "O").End(xlUp)).Sort Key1:=.Range("C2"), Order1:=xlAscending, Header:=xlYes End With end With
I have some code that will run if I am populating an empty table(no duplication's possible) but now I am trying to create a Sub to check for existence of a record and handling it going forward.
Anyways the big picture is looping through a text file and placing data where it needs to go. The code follows including some comments point to the issue.
Code: Sub PutinNewTag(TableIn As String, Tagtype As String, textline As String) Dim strSQL As String Dim NameIn As String Dim TagName As String Dim Db As DAO.Database Dim rstin As DAO.Recordset
I have two reports running off of the same crosstab query. I copied one report to make the second report, then modified the second report to change the background of column fields satisfying certain conditions. These lines of code were added to the Detail_Format section, in color below. The report with the extra code lines does not error--the original report errors.
Code: Option Compare Database ' Constant for maximum number of columns EmployeeSales query would ' create plus 1 for a Totals column. Here, you have 9 employees. Const conTotalColumns = 11
[Code] .....
If I say OK (rather than debug) after the error message, I can then click the button for the report again and it runs without complaint. And, as I said, the report with the added code never errors.
I have a networked database. It is accessed with computers that have both Office 2002, and office 2003. I get the following error message on computers with Office 2003:
"Object variable or With block variable not set"
It happens occasionally and the problem generally fixes itself so I dont think there is anything wrong with my coding.
And when it happens on the computers with office 2003 the ones with office 2002 can open the database fine.
The following block of code was working great until I came into work this morning. This routine is called from the OnClick event of several combo boxes. When it does, I recieve the error listed above (Object variable or With block variable not set) on line:
If Me.cbxAss_Filter <> "All" Then
Any ideas? I'm running on no sleep in the last 24 hours so I'm sure I'm missing something simple
The code itself checks the contents of a form and builds a string of conditions which I apply to the Form's filter property to filter records.
Code:Public Sub CreateFilter() '************************************************* **** 'Name: CreateFilter 'Purpose: Generate a string to filter the form 'Inputs: None 'Outputs: None 'Instigates: Me.Filter ' 'Updated: 11/30/06 'By: Chris Lounsbury '************************************************* **** 'Vars Dim strFilter Dim lngLength As Long strFilter = Null strFilter = "" 'Each filter box has its own check for contents If Me.cbxAss_Filter <> "All" Then strFilter = "assigned = '" & Me.cbxAss_Filter & "' AND " End If If Me.cbxAction_filter <> "All" Then strFilter = strFilter & "action = '" & Me.cbxAction_filter & "' AND " End If If Me.cbxStatus_filter <> "All" Then strFilter = strFilter & "status_rsrch = '" & Me.cbxStatus_filter & "' AND " End If If Me.Combo34 <> "All" Then strFilter = strFilter & "rims_flags = '" & Me.Combo34 & "' AND " End If If Me.cbxAAMB_filter <> "All" Then strFilter = strFilter & "aamb = '" & Me.cbxAAMB_filter & "' AND " End If 'Check if filter string was built If strFilter = "" Then Me.FilterOn = False Else 'Determine length of Filter String 'minus the trailing ' AND' lngLength = Len(strFilter) - 5 'Chop off ending ' AND' and set the form filter If lngLength <= 0 Then Else Me.Filter = Left(strFilter, lngLength) Me.FilterOn = True End If End If 'debug 'MsgBox (strFilter) End Sub
I need to export a table as a text file but using the outputto or transfer text options do not produce the file format I want. If I export the file as Excel and then save it as text it's OK so I copied the following code to automate the procedure but get an error 'Object variable or With block variable not set.
Private Sub Command167_Click() On Error GoTo Err_Command167_Click Dim objWordApp As Object Dim objWordDoc As Object Set oApp = CreateObject("Word.Application") 'make word not show up to user objWordApp.Visible = False Set objWordDoc = objWordApp.Documents.Open("C:Documents and SettingsUserDesktopEXPRESS DIPLOMA LETTER.doc") objWordDoc.PrintOut 'quits word objWordApp.Quit Set objWordDoc = Nothing Set objWordApp = Nothing Exit_Command167_Click: Exit Sub Err_Command167_Click: MsgBox Err.Description Resume Exit_Command167_Click
End Sub
When a command button is pressed, it returns: "OBJECT VARIABLE OR WITH vARIABLE NOT SET"
Does anyone have an idea on how to solve this problem?
I get this error message, " object variable or with block variable not set", when I'm in the design view of a form wanting to use the command button wizard. Using a brand new database/blank I imported a table from my database in question. I then tried to make a new form and put a button on it. It worked for awhile but then when I close the database and reopen it to add another button to the same form, I get the error message again. It isn't a problem that is specific to my homeschool database. It affects all the database I use/maintain as well as any new "test" databases I've made trying to figure out this problem. I looked at references before and after the error occurs and there is not difference. I've also looked at code but don't see anything code that requires variables to be defined. In the case of the test database with one table and one form there is no code to look at until I make a button before exiting and even then, I don't see anything weird.
I would appreciate any help you can offer.
I've attached the original database I was working on when the problems began.
Is it possible for a database program to adjust security levels on certain reference libraries when installed on ones computer, thus making all other database act up that are using those libraries?
message "cannot find the object "." ". I have looked in the VBA for the Report I am working with and the form that has the underlying data and cannot find the rouge period! I am creating a label for payment envelopes that is gets its data from the form that indicates payments made
I am trying to use Access 2007 popup calendar to populate a combo box with a selected date. When I select the date on the calendar the above error appears.
Code:
Private Sub Calendar9_Click() 'Set Date to the selected date and hide the clalendar. MAssBDate.Value = Calendar9.Value MAssBDate.SetFocus Calendar9.Visible = False End Sub
When we use DoCmd.SendObject, the object name is always the same name of table, query or report.Can we customize object name to something else more descriptive? For example:
If I send the report "SalesPerSalesman" about John Smith, the object name now is "SalesPerSalesman.pdf" If i send the report "SalesPerSalesman" about Maryann Johns, the object name would be again "SalesPerSalesman.pdf"
However , the object name I would like "SPS_JohnSmith.pdf"and the report for Maryann Johns, I would like as object name "SPS_MaryannJohns.pdf"
Syntax DoCmd.SendObject ObjectType, ObjectName, OutputFormat, To, Cc, Bcc, Subject, MessageText, EditMessage, TemplateFile ObjectName � Name of table, query, Report etc.
Not sure whats going on here, nothing on the table that stops this from working. I just get Run-time error "2448 You can't assign a value to this object" When the code runs.
Code: Private Sub Form_Open(Cancel As Integer) Dim rst As DAO.Recordset MySQL = " Select max(ID) from TblUserQry" Set rst = CurrentDb.OpenRecordset(MySQL) Myid = rst.Fields(0) + Int(Rnd(1) * 10) Me.txtMyID.Value = Myid
I am in the middle of creating a function that populates two unbound text boxes on a form and then uses those unbound textboxes in a query (Total of 3 unbound text boxes - 2 are populated from this function). The saved query object is working fine when I manually execute it (after the unbound text boxes have been populated). However, when I go to set the same query to a recordset I am getting the "Too Few Parameters. Expected 3." error message.
In the saved query I used the build function to use the unbound text boxes as part of the where clause. Below is the code I am trying to execute:
PHP Code:
Public Function Test()Dim db As DAO.DatabaseSet db = CurrentDbDim rst As DAO.Recordset Dim DtBegin As String''FInd the Begin dtstBegin = DateAdd("q", -1, DateSerial(Year(Date), (DatePart("q", Date) - 1) * 3 + 1, 1)) Dim DtEnd As String''find the end dateDtEnd = DateAdd("Q", DateDiff("Q", 0, Date) - 1, 0)
[Code] ......
The unbound text boxes are populated before the query is set to the recordset.
I have been using this export function for the longest time and today it is giving me an error:Object invalid or no longer set.
Code: On Error GoTo Err_cmdTest_Click 'Must 1st set a Reference to the Microsoft Office XX.X Object Library Dim dlgOpen As FileDialog Dim strExportPath As String Const conOBJECT_TO_EXPORT As String = "EXPORT"
I'm trying to display an image which is saved in the table as an OLE Object in a message box. The field with the object is "PowerCurve". This is what I'm trying to do. It allows me to get as far as clicking yes to view the second message box but then it results in an error when it tries to display the image.
Code:
Dim strDetails As String strDetails = DLookup("Details", "ExistingDeviceDetailsQ") Dim strCurve As String strCurve = DLookup("PCurve", "DeviceT", "DeveloperProduct = '" & Forms!DeviceF!D_ExistingDeviceCmb & "'") If strCurve = "No" Then MsgBox strDetails, , "Device Details"
[code]....
I get the error "Object variable or With block variable not set" on the line
Access 2013...Code that has been working is suddenly causing the error "Object invalid or no longer set". Line causing the error is marked.
Code: Private Sub CreateTable() Dim dbsDb As dao.Database Dim tblTemp As dao.TableDef Dim fldTemp As dao.Field Dim rst As dao.Recordset Dim rstRsF As dao.Recordset
I have 2 databases (accdb). Both databases have a loading pop form. Also both databases include the following line of code when the loading form opens:
Code: docmd.runcommand acCmdAppMinimize
This code works great when I open the databases individually. but my problem is that I have a label on the pop form in accdb 1 with its hyperlink address set to accdb 2 and the subaddress set to the macro name.The hyperlink opens the database 2 just fine and it opens the loading form but it doesn't minimize the application window.
If I set a variable inside of a subroutine, it is set to nothing upon the end of the sub. Can I set a variable outside a sub and set its value, so that you can use it within subs?
I have VBA code that makes use of the Microsoft Office 14.0 Object Library, but if I have this selected whenever I try to do anything in the Form Design view it is constantly freezing. It will literally say not responding" for a minute or so then I will have control again.
I am in the midst of migrating an Access 2003 database to Access 2007 and one of its most important module uses the filesearch object to transfer table data from word files into a table in the databse.
Code:
Option Compare Database Option Explicit Public Function ImportPathTableData() Dim objWord As Object Dim objDoc As Word.Document Dim db As Database Dim data As Recordset Dim bWord As Boolean Dim strFolderName, strNPID, strTemp As String Dim tablenb, table, row, column, i As Integer
I am trying to connect to MS Access from MS word using the following code but getting the above error message:
Code: Sub GetDataFromDataBase() 'allocate memory for the database object as a whole and for the active record Dim myDataBase As Database Dim myActiveRecord As Recordset